Dear Friends,
I recently purchased a slightly used HTC Amaze 4g.
I amnot in US and dont have access to T-Mobile service.
I want to upgrade my Amaze.
Currently my Amaze has following Software:
Android 2.3.4
Sense 3.0
Software number QuickSense v2.1.2
Kernel 2.6.35-g52e85af
Based band version 1.08.550L.19DC_30.66.550L.08D
Browser number Webkit/533.1
When I go to About Phone for updation of software, there appears "Google Software updateds" instead of "HTC updates"
When I try to update "Google Software Update" a message appears that the software is upto date.
My sets "S" is on.
"Rom Manager" and "Superuser" is already installed
I need step by step guidance about how I can update the software and how I can get best out of my Amaze.
If any one wants to help, I shall be highly thankful.
I sahll also need all kind of files which will be needed to update the software.
I'm not too sure what exactly mean by upgrade (how far you want to go) but you have to start by flashing ICS and then go for there.
Lots of how to's here: http://forum.xda-developers.com/showthread.php?t=1679486 follow those tutorials
if you want to upgrade from gingerbread to ics all you need to do is relock your bootloader and flash the ics OTA ruu located in my signature... since you unlocked your bootloader to root the phone you can relock it using hasoon's all in one toolkit.. then rename the ICS ruu to PH85IMG.zip and place it on the root of your phones sd card or internal storage.. then boot your phone into the bootloader once it's relocked.. then flash the update...
Related
Just got my Rezound about a week ago, and this is the FIRST HTC Android phone I have ever had. First unlocked phone as well!
I have experience with Moto phones and the .sbf process and what not and am pretty good with adb, but still a noob.
Questions is, found this RUU from the dev section: RUU_Vigor_VERIZON_WWE_1.02.605.6_Radio_RS_0.95.00. 1013r_3161E_9K_NV_8k_1.12_9k_1.83_V_APT_release_22 1502_signed.exe
Is this the latest official RUU? I noticed by looking at the numbers vs my software version and it seems the baseband is off, so, If I flash this, this will return me to complete stock, will I be able to update my baseband via OTA Software update?
Thanks everyone.
You should be able to run the ruu on a pc and restore it to how it was out of the box. First you do have to re lock it though
sent from my newly unlocked Rezound
pwned3 said:
You should be able to run the ruu on a pc and restore it to how it was out of the box. First you do have to re lock it though
sent from my newly unlocked Rezound
Click to expand...
Click to collapse
I know how to run it, just want to make sure that the ones posted are for one official and if the baseband is slightly off by a few versions if doing an OTA update will update it. The latest RUU that I can find (here on XDA) looks like it has a different baseband than what came on the phone.
And yes, re-locking before the RUU flash is a must.
When i bought my HTC Flyer last Year i made it S-OFF immediately using Revolutionary.
After a couple of months, HTC asked me to update my device to a newer firmware.
So i backed up all my data and tried it.
When i stared the device, a warning droid appeared on the screen.
So i restored my data and still everything works fine.
But i a still on 2.3.3 and i really want to use the newest Version working with Revolutionary.
So here are my problems:
1. I don't know how to remove Revolutionary
2. To install (or update) Revolutionary, i need another hboot version
(mine is 6.10.1002 and i need 1.10.0000 or 1.11.0003)
So how to update my hboot ?
3. What possibilities i got, concerning the update of my device ?
4. I searched for my specific RRU to flash my device but i could't find or identify it?
Which one should i download ?
Information about my Flyer
I have the Wifi-Editon from a local store in germany, so i have no specific Branding from Vodafone or Tmobile.
Its current Firmware Version is 2.3.3
Hboot is 6.10.1002
I rooted it with Revolutionary
I would be really amused if you would pay some attention to my thread and try to help me
if you want HC follow this thread
http://forum.xda-developers.com/showthread.php?t=1358758
Thank you very much
This really helped me
BUT
After the installation, i tried to use a backup from Revolutionary and now my screen is stuck on the htc sign when it starts.
(Unfortunately i havent made a backup after the installation of HC )
please close this thread
I will make a new one, showing my problem in the Title
Flyerhelpme said:
please close this thread
Click to expand...
Click to collapse
They don't close threads here, just because the OP no longer has a use for it. They are left open, in case other people want to comment, or for the benefir of people that may encounter a similar issue.
For future reference, don't EVER EVER EVER install an official OTA update to an S-Off/rooted Android device. At a minimum, the update won't work. At the worst, the update may remove root (may be difficult or impossible to re-root), or you might be stuck unable to boot. Pre-rooted versions of updates usually end up getting posted in the Development subforum (like the one posted in a previous response), and often very quickly after the official OTAs go out. THOSE are safe to flash.
I have hboot 1.53.., s-on and also unlocked bootloader, also it is bought in full (not contract) therefore it is not associated with any phone network . I want root access without changing the official firmware (Official HTC android ICS 4.0). I don't mind wiping everything. My question is can I have root access on the official firmware, and exactly (if I can) how to do it. Other guides seem really full on, because I am a noob!
http://www.youtube.com/watch?v=eNoL_...layer_embedded
there is s-on root in here. if you don't want to change official ics nobody can force you to do it.
I have a Rezound that is not active. It just gets used around the house on wifi for checking email, facebook, and to control the wifi thermostat. I would like to get the latest OTA but cannot do it from the phone as it does not have an active sim. I don't really want to root the phone. I did the PH98IMG zip method to get 4.03.605.2 but it seams a little slow and it is my understanding that there is a new version of 4.05 or perhaps newer OTA... Does anyone have a link to a zip of the OTA that I can download?
Thanks for the help!
happyharvick said:
I have a Rezound that is not active. It just gets used around the house on wifi for checking email, facebook, and to control the wifi thermostat. I would like to get the latest OTA but cannot do it from the phone as it does not have an active sim. I don't really want to root the phone. I did the PH98IMG zip method to get 4.03.605.2 but it seams a little slow and it is my understanding that there is a new version of 4.05 or perhaps newer OTA... Does anyone have a link to a zip of the OTA that I can download?
Thanks for the help!
Click to expand...
Click to collapse
Well, your in a bad spot actually... 4.3.605.2 does not have an upgrade path at all, there is no OTA from it, or to it for that matter... it was an unofficial leaked firmware that is not supported in the standard software streams. Even if it was active on Verizon, it would never see an upgrade... ever.
You have 3 choices here:
1) S-OFF the device and get back to an official software build and manually OTA up (See the instructions for Full Downgrade/Upgrade here)
2) Assuming you are already Hboot unlocked, flash a custom ROM or a stock-ish ROM, there is a pre-rooted 4.5.605.14 ROM in the dev section
3) Stick with what you got, to be honest the ROM you have is pretty stable.
acejavelin said:
Well, your in a bad spot actually... 4.3.605.2 does not have an upgrade path at all, there is no OTA from it, or to it for that matter... it was an unofficial leaked firmware that is not supported in the standard software streams. Even if it was active on Verizon, it would never see an upgrade... ever.
You have 3 choices here:
1) S-OFF the device and get back to an official software build and manually OTA up (See the instructions for Full Downgrade/Upgrade here)
2) Assuming you are already Hboot unlocked, flash a custom ROM or a stock-ish ROM, there is a pre-rooted 4.5.605.14 ROM in the dev section
3) Stick with what you got, to be honest the ROM you have is pretty stable.
Click to expand...
Click to collapse
Thanks for taking the time to reply but I am not sure what you are referring to by "s-off" or hboot unlocked"
Can you point me in the right direction to learn a little more?
Thanks!
Hboot unlock is a process which is done via htcdev.com, it unlocks the phone to allow custom ROMs and recovery... Go to their site for more details or check out any of several YouTube videos.
S-Off is a means of turning off all security checks in the device, such as flashing an older RUU to downgrade. It is accomplished after Hboot unlock with a tool like RumRunner, check out rumrunner.us for more info.
If you are completely unfamiliar with unlocking, rooting, romming, or that kind of stuff, Google can be your friend here to learn the ins and outs, plus the sticky threads in the Rezound sections here.
I just bought an AT&T HTC One M8 that came with android 4.4.2 KitKat. It apparently doesn't have any available android lollipop updates since checking for updates using the "AT&T Software Update" option in settings returns a "no updates available" which was weird, but I didn't mind since I was planning to root this and flash a custom rom.
I read up on guides on rooting and unlocking the bootloader which was pretty standard for most android devices. However, S-on/S-off and hboot are 2 things that are confusing me a bit right now despite doing quite a lot of searching on XDA. To my understanding, S-on/S-off is some kind of HTC protection that needs to be disabled to flash certain roms, and hboot seems to be what people are calling the HTC Bootloader (someone correct me if I'm wrong). If I'm correct, I seem to have hboot version 3.16 according to CPU-Z (I checked the Bootloader version number).
After enough reading, it seems like having the latest hboot version is relatively important for flashing many roms (3.18-3.19 I believe), but I have found no guides on how to do this. My only lead so far is the following thread with 1 reply: http://forum.xda-developers.com/att-htc-one-m8/help/update-hboot-3-18-3-19-t3236897
"Backup any personal data you want to keep (off phone, it will be wiped). Relock the bootloader, run the latest AT&T RUU."
So ok, I guess it's a good thing I'm doing this before rooting the device. However, What's the AT&T RUU? My closest guess was using the HTC Sync Manager on windows to find firmware updates manually, but upon trying this (installing htc sync manager and connecting my HTC One M8) and on the menu clickling "Check for updates", I just get an error message saying "Unable to connect to the live update service".
Then, after some more searching I found this thread: http://forum.xda-developers.com/att-htc-one-m8/help/how-update-bootloader-to-3-18-0-0000-t3006738 which said the following:
"Follow instruction on the following thread for updating firmware, and select the 3.28.1540 firmware file: http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-n"
So, here I am. Unsure whether to follow this instructions since I have no idea what that firmware is or if it will brick my device, or whether it will work since I still haven't rooted or unlocked my device's bootloader and I don't have S-Off (and that thread clearly states S-Off is mandatory for flashing to work). Any ideas?
---------------------------------------------------
edit: I just found out what RUU stands for, but I have been unable to find this "Rom Update Utility". It's spoken as Windows software, but I can't find where to download it. Any help would be very appreciated
sarxion said:
I just bought an AT&T HTC One M8 that came with android 4.4.2 KitKat. It apparently doesn't have any available android lollipop updates since checking for updates using the "AT&T Software Update" option in settings returns a "no updates available" which was weird
Click to expand...
Click to collapse
Are you connected to the AT&T network?
sarxion said:
I read up on guides on rooting and unlocking the bootloader which was pretty standard for most android devices. However, S-on/S-off and hboot are 2 things that are confusing me a bit right now despite doing quite a lot of searching on XDA. To my understanding, S-on/S-off is some kind of HTC protection that needs to be disabled to flash certain roms.
Click to expand...
Click to collapse
S-off is not needed to flash any ROMs. S-off is one way to update the firmware needed to run a ROM (more on what "firmware" is in a bit), but s-off isn't strictly need to update firmware either (other ways to do it s-on).
s-off is needed to modify (hack) certain partitions that are protected even with the bootloader unlocked. Such as hboot, radio, and some others. But its only needed for those specific things; and not needed to flash custom recovery or ROMs. And note that you can still update hboot, radio, and other firmware by "official" means even with s-on.
sarxion said:
hboot seems to be what people are calling the HTC Bootloader (someone correct me if I'm wrong).
After enough reading, it seems like having the latest hboot version is relatively important for flashing many roms (3.18-3.19 I believe)
Click to expand...
Click to collapse
Yes, hboot and bootloader are the same thing, as far as HTC devices are concerned.
Not only is the latest hboot needed to flash the current ROMs, but its important to update the entire firmware package. Firmware includes not only hboot, but also a number of other critical modules such as radio, WiFi, Bluetooth, and others; that all need to be updated in order for the current ROMs to function properly.
Good news, you are on the right track, and the proper RUU will update not only hboot, but all the firmware.
sarxion said:
What's the AT&T RUU?
edit: I just found out what RUU stands for, but I have been unable to find this "Rom Update Utility". It's spoken as Windows software, but I can't find where to download it.
Click to expand...
Click to collapse
I've created an AT&T index thread to catalog such things (sticky to the top of the General AT&T M8 section). It explains what an RUU is, and has links to all AT&T RUUs. You will want the latest RUU (4.28.502.1 or 4.28.502.2 - they are mainly the same except the latter has the Stagefright fix):
http://forum.xda-developers.com/showthread.php?t=2751432
The RUU is rather self-explanatory. As mentioned previously in this thread (and on the Index) your phone will be wiped by the RUU. So backup anything you want to keep by your method of choice. Then simply download the RUU to a PC, connect the phone. Then run the RUU program, and it will walk you through the process (you basically just need to confirm a couple dialogue boxes, and the RUU will do the rest and automatically update all the software/firmware).
After that, what you want to do in short is:
1) Unlock the bootloader using HTCDev.com
2) Install TWRP 2.8.7
3) Flash your custom ROM of choice
4) Beer