[Q] flashing and entering into rcovery mode - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

heyy guyzz this is my first thread ..........so plz help me
how can i enter into recovery mode on my lww.......
i read all the methods but i couldnt enter into recovery method
and if i enter into recovery mode how will i come to know that its d recovery mode
and flashing with cwm i couldnt find the option of "install zip rom" or sumthin lyk dat it shows that cwm is not supported for my cell
can u plz provide step b step how to flash a zip file rom and where do i get the options of cleaning all caches as i cannot enter into recovery mode and CWM does not gives me the option of flashing zip file
plzzzzzzzzzzzz helppp.................if u can provide me wid the cwm sw for sony lww
my cell is live with walkman rooted and with locked bl
thankss in advance

Xparts
I think the easiest way is to go to the play store download an app called "xparts", install cwm with it, then in xparts select reboot to cwm, wait for the reboot and then in cwm, the fifth option is install zip from sdcard >> choose zip from sdcard >> Yes >> And It´s done I Hope this can help you

javierl93 said:
I think the easiest way is to go to the play store download an app called "xparts", install cwm with it, then in xparts select reboot to cwm, wait for the reboot and then in cwm, the fifth option is install zip from sdcard >> choose zip from sdcard >> Yes >> And It´s done I Hope this can help you
Click to expand...
Click to collapse
thnx bro :good::laugh:
but wat all data shuld i wipe to flash from zip

aryan parashar said:
thnx bro :good::laugh:
but wat all data shuld i wipe to flash from zip
Click to expand...
Click to collapse
The wipes you must do depends on what you wanna do, i suggest you to look for the Op in case you wanna flash rom, you will find install instructions you can follow

aryan parashar said:
thnx bro :good::laugh:
but wat all data shuld i wipe to flash from zip
Click to expand...
Click to collapse
Wipe data /factory reset
Wipe cacge
Wipe dalvik cache
Flash ROM from zip...
Don't wipe system... Wipe system only if the its mentioned in ROM thread....
Otherwise don't wipe system

Thnxx I wiped everything u said but after flashing after rebooting my cell has stuck on Sony Ericsson logo
Sent from my WT19i using xda app-developers app

aryan parashar said:
Thnxx I wiped everything u said but after flashing after rebooting my cell has stuck on Sony Ericsson logo
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
Make sure the kernel you are using and the ROM you want to flash are compatible. If they are not you will either need to flash a compatible ROM or use flashtool to flash a compatible kernel -there is usually one inside the ROM or mentioned in the OP of the ROM.

Can you mention me which rom are you trying to flash?

I've scream pureness v4
My lww is on gb
Sent from my WT19i using xda app-developers app

The room is ice scream pureness v4
My lww is on gb
Thnx plz help
I mean I want ice scream pureness v4... M currently on gb..... Do I need to get ics officially in order to get this rom.... Becoz rooting lww on ics is not successful in all cases
Sent from my WT19i using xda app-developers app

If your rom is ics based you must atleast flash an ics kernel (on unlocked bootloader) and if u can't unlock the bootloader, just update to 4.0.4 and then root ur phone using mihahn's awesome guide in stickies....and then flash the rom doing correct wipes,
Press THANKS if I helped,
Regards,
Abhinav
Sent from my SK17i using Tapatalk 2

Wat is mihanns guide can u provide the link
Sent from my WT19i using xda app-developers app

Sure.....just press the thanks button for me and firstly mihahn......
here's his rooting guide and here's his guide on how to install custom rom/kernel....
Regards,
AJ

EASY
aryan parashar said:
heyy guyzz this is my first thread ..........so plz help me
how can i enter into recovery mode on my lww.......
i read all the methods but i couldnt enter into recovery method
and if i enter into recovery mode how will i come to know that its d recovery mode
and flashing with cwm i couldnt find the option of "install zip rom" or sumthin lyk dat it shows that cwm is not supported for my cell
can u plz provide step b step how to flash a zip file rom and where do i get the options of cleaning all caches as i cannot enter into recovery mode and CWM does not gives me the option of flashing zip file
plzzzzzzzzzzzz helppp.................if u can provide me wid the cwm sw for sony lww
my cell is live with walkman rooted and with locked bl
thankss in advance
Click to expand...
Click to collapse
STEPS :
1) Remember to install CWm u need to be rooted.. ROOT u phone via http://forum.xda-developers.com/showthread.php?t=1695514.... alternative is root ginger bread and update to ICS through update centre(WIFI) u will stay ROoted...
2) install CWM via http://forum.xda-developers.com/showthread.php?t=1559685... just download extract and start cwm2.cmd....
3)Now to enter CWM recovery when u switch on phone SONY appears just keep on pressing VOLUME DOWN key at that time u will enter CWM recovery..
to install ROM:
1) download ROM through PC and copy in memory card...UNPLUG usb reboot phone enter CWM..
firsty BACKUP phone
than remove cache partitiion
Select 'wipe data/factory reset' (MUST DO)
go to mount and format system
go to advance and wipe delvin cache
now go to install via zip and locate u ROM install and enjoy...
EASY I M NOOB TOO BUT AFTER MY EXPERIMENTS THESE ARE EASIEST U CAN GET>>>
NJOY

Related

[Q] Rom for optimus one

Hey
i have rooted my phone with gingerbreak and install custom recovery
i have android 2.2.1 and want a rom wich fullfill following needs or most of dem
1.i m gamer so i want a rom with high speed
2.good battrey life
3.excellent speed
And main thing don't post any hard things bcoz i m of 12yrs . .
Thnqs in advance
virusshah1997 said:
Hey
i have rooted my phone with gingerbreak and install custom recovery
i have android 2.2.1 and want a rom wich fullfill following needs or most of dem
1.i m gamer so i want a rom with high speed
2.good battrey life
3.excellent speed
And main thing don't post any hard things bcoz i m of 12yrs . .
Thnqs in advance
Click to expand...
Click to collapse
u are back from vacation
shhbz said:
u are back from vacation
Click to expand...
Click to collapse
Yaa re...yesterday i came.... i rooted my phone and install custom recovery....
now i want to know how do i install best rom and safely..... plz teach me if u can ....
virusshah1997 said:
Yaa re...yesterday i came.... i rooted my phone and install custom recovery....
now i want to know how do i install best rom and safely..... plz teach me if u can ....
Click to expand...
Click to collapse
as far as gaming is concerned cm7,open optimus,franco built are all good.
which recovery have u installed ?
cm7 provides around 36 hours battery
open optimus around 42 hours
i wont elaborate much just make your choice which rom u want and what recovery are u using i will guide u accordingly
shhbz said:
as far as gaming is concerned cm7,open optimus,franco built are all good.
which recovery have u installed ?
cm7 provides around 36 hours battery
open optimus around 42 hours
i wont elaborate much just make your choice which rom u want and what recovery are u using i will guide u accordingly
Click to expand...
Click to collapse
I dont know properly..... file name wich i downloaded was amon_ra_recovery
cm 7 i think is better ..... can u teach me plz
virusshah1997 said:
I dont know properly..... file name wich i downloaded was amon_ra_recovery
cm 7 i think is better ..... can u teach me plz
Click to expand...
Click to collapse
since you are not aware of recovery and you want to use cm7 just flash this http://forum.xda-developers.com/showthread.php?t=1024838 (download the signed recovery) this is recommended to avoid bootloop as this wipe the system directly form recovery witout failing whereas thunderg recovery somtimes fails to wipe system, if you still want to use thunderg use the latest flash file here http://forum.xda-developers.com/showthread.php?t=1065197
boot into recovery switch off your phone press home+vol down+power
now select usb ms toggle and copy the file just downloaded and flash it then reboot now u have clockwork which works great with cm7.
steps to follow
Boot into clockwork recovery.
go to backup and restore -create a backup of your current rom (Note:If already backup has been done then avoid this step, backup created using amonra or thunderg wont support restoring using clockwork)
go to mount and storage-format sd card
wipe data/factory reset
wipe cache partition
mount and storage-format system
mount and storage-mount usb storage (make sure usb debugging is enabled)
copy the rom zip file to the root of your sd card
unmount
install zip from sd card-choose the rom zip and install
flashing takes 3-5 min
reboot
i havent provided you a2sd steps as i dont want you to get confused and land yourself in prob
shhbz said:
since you are not aware of recovery and you want to use cm7 just flash this http://forum.xda-developers.com/showthread.php?t=1024838 (download the signed recovery) this is recommended to avoid bootloop as this wipe the system directly form recovery witout failing whereas thunderg recovery somtimes fails to wipe system, if you still want to use thunderg use the latest flash file here http://forum.xda-developers.com/showthread.php?t=1065197
boot into recovery switch off your phone press home+vol down+power
now select usb ms toggle and copy the file just downloaded and flash it then reboot now u have clockwork which works great with cm7.
steps to follow
Boot into clockwork recovery.
go to backup and restore -create a backup of your current rom (Note:If already backup has been done then avoid this step, backup created using amonra or thunderg wont support restoring using clockwork)
go to mount and storage-format sd card
wipe data/factory reset
wipe cache partition
mount and storage-format system
mount and storage-mount usb storage (make sure usb debugging is enabled)
copy the rom zip file to the root of your sd card
unmount
install zip from sd card-choose the rom zip and install
flashing takes 3-5 min
reboot
i havent provided you a2sd steps as i dont want you to get confused and land yourself in prob
Click to expand...
Click to collapse
how i do uninstall my recovery and install clockworf recovery
everything must me safe
virusshah1997 said:
how i do uninstall my recovery and install clockworf recovery
everything must me safe
Click to expand...
Click to collapse
its safe u see u are to small to understand instruction rather chk ur pm thats the only solution u dont need to remove recovery
shhbz said:
its safe u see u are to small to understand instruction rather chk ur pm thats the only solution u dont need to remove recovery
Click to expand...
Click to collapse
cant u post here link to download and how to install it with am...(i dont spelling) recovery.....
plz help dude
Hi !
You can flash Nessy #Hypnos
Cheers

[Q] How to install Custom Rom in i9001 ??

I hav a rooted samsung galaxy s plus ,its running on 2.3.4 , i want to install custom roms so please tell me how to install in details?????
Gam3boy said:
I hav a rooted samsung galaxy s plus ,its running on 2.3.4 , i want to install custom roms so please tell me how to install in details?????
Click to expand...
Click to collapse
Flash feamod recovery first...
Flash from odin...
Download required rom
, boot into recovery and install!!
Sent from my GT-S5830 using xda premium
pvrx said:
Flash feamod recovery first...
Flash from odin...
Download required rom
, boot into recovery and install!!
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
i hav odin but dont know how to install the feamod recovery ???
Gam3boy said:
i hav odin but dont know how to install the feamod recovery ???
Click to expand...
Click to collapse
Download FeaMod Recovery from this thread:
http://forum.xda-developers.com/showthread.php?t=1331164
This is the direct link to Version 1.2 for quicker access.
http://www.mediafire.com/?u9996yn6i7rc92z
Connect phone to your computer. Open the FeaMod file through the PDA section on Odin and then start the process.
After Odin installs it and you get a "PASS" you will have a custom recovery and you can follow the steps said above.
awesomedoscious said:
Download FeaMod Recovery from this thread:
http://forum.xda-developers.com/showthread.php?t=1331164
This is the direct link to Version 1.2 for quicker access.
http://www.mediafire.com/?u9996yn6i7rc92z
Connect phone to your computer. Open the FeaMod file through the PDA section on Odin and then start the process.
After Odin installs it and you get a "PASS" you will have a custom recovery and you can follow the steps said above.
Click to expand...
Click to collapse
Hey do i have to put my phone into downloading mode then connect to the pc ????
Gam3boy said:
I hav a rooted samsung galaxy s plus ,its running on 2.3.4 , i want to install custom roms so please tell me how to install in details?????
Click to expand...
Click to collapse
install CWM v5.5.0.4 with odin
Place the rom on the phone and get recovery mode:
wipe data/factory reset,
wipe cache partitions,
advanced/wipe dalvik cache
install rom
wipe cache partitions,
advanced/wipe dalvik cache
reboot system now.
http://forum.xda-developers.com/showthread.php?t=2000828
use the steps detailed in the link above. IMHO it's the best rom to date for i9001 based on JB.
Let me know in a PM if you need any help understanding any of the steps.

[Q] Unable to go past Sony logo after Pacman rom install on Neo V

I have Xperia Neo V running on ICS 4.0.4
Bootloader unclocked: Yes
Rooted: Yes
CWM Recovery Installed : Yes
CWM ROM backUp : Yes
wipe data/ dalvic
flashed Pacman latest rom// success
flashed Gapps// Success
Rebooted, now cannot go past Sony logo and cannot go to recovery also. Looks like I am soft bricked.
Please advice.
You forgot to install the kernel which was present inside the zip.
svprm said:
You forgot to install the kernel which was present inside the zip.
Click to expand...
Click to collapse
Where was that file. I just have haida_PAC_jb-alpha-v15.0.0.zip
What should I do to fix my phone now. I can only go to fastboot mode.
aashishbhargav said:
Where was that file. I just have haida_PAC_jb-alpha-v15.0.0.zip
What should I do to fix my phone now. I can only go to fastboot mode.
Click to expand...
Click to collapse
It should be inside the zip as the op said in Neo V thread of PAC.
If you found it, do everything again. Here you got a how to (its for ray and arc but works for you to):
http://forum.xda-developers.com/showthread.php?p=33572615
dont forget to hit thanks for information, especially to op of named threads
best regards
Just change kernel.The Kernel inside .zip(Haida PAC JB ...).U have to install it with Fastboot method or flashtool software...please read carefully man....
the kernel is built-in with Recovery...
Thank for all those who helped.
I had to flash kernel via flashtool in fastmode.
I have been a samsung user since 2 years. Happily flashing.
Did not know that kernel had to be flashed before flashing rom
Thanks for help :good:
factory reset and wipe all will help u
same problem
aashishbhargav said:
Thank for all those who helped.
I had to flash kernel via flashtool in fastmode.
I have been a samsung user since 2 years. Happily flashing.
Did not know that kernel had to be flashed before flashing rom
Thanks for help :good:
Click to expand...
Click to collapse
ok so i did the same (did not flash kernel).................but now after flashing the .431 kernel via flashtool it is still not happening......it wont go past the sony logo..........when i try with SEUS it says i already have the latest software installed...........please help.
Flash whole stock firmware with flashtool so you are able to boot phone.
Then when you will know the right steps, put rom .zip into sd, flash the right kernel and finally install rom via cwm following dev's instructions.
To flash a custom kernel you need unlocked bootloader.
Sent from my MT15i using xda app-developers app
varun_Gimmic said:
ok so i did the same (did not flash kernel).................but now after flashing the .431 kernel via flashtool it is still not happening......it wont go past the sony logo..........when i try with SEUS it says i already have the latest software installed...........please help.
Click to expand...
Click to collapse
you flashed .431 kernel but u had to flash kernel from inside zipped ROM file (img file)
How to Flash PACman ROM (first time)
1 - MAKE BACKUP
2 - download rom zip file, store it somewhere on your SD card (I have a "FlashFiles" folder)
3 - copy boot.img from zip to pc, where you can find it
4 - flash kernel in ROM zip file in fastboot mode
5 - reboot into recovery
!! did you make a backup ??
6 - flash ROM
7 - flash gapps (or inverted gapps if you want)
8 - factory reset
9 - wipe cache
10 - wipe dalvik cache
11 - flash any other zip's you need/want to (e.g. wifi modules if you usin other kernel as in the zip)
12 - reboot
13 - enjoy
14 - click on THANKS button in szl's Original Post
aashishbhargav said:
I have Xperia Neo V running on ICS 4.0.4
Bootloader unclocked: Yes
Rooted: Yes
CWM Recovery Installed : Yes
CWM ROM backUp : Yes
wipe data/ dalvic
flashed Pacman latest rom// success
flashed Gapps// Success
Rebooted, now cannot go past Sony logo and cannot go to recovery also. Looks like I am soft bricked.
Please advice.
Click to expand...
Click to collapse
I happened to soft-brick my Neo V few days back after installing a custom ROM. Please read on to see what helped me get my Neo V up and running again.
If your phone is stuck at SONY logo, I doubt it will go into CWM recovery mode either. I had tried flashing stock kernel through Flashtool, and also tried the FOTA-Unbrick method via flashtool, but even that didn't help. Finally, I used the "repair" option in PC Companion which flashed Stock ICS ROM on my Neo V (however, all data on phone's internal memory was lost and my phone had to e rooted again). But at least my phone was recovered. Hope this will guide you.
Flashing PAC man ROM
varun_Gimmic said:
ok so i did the same (did not flash kernel).................but now after flashing the .431 kernel via flashtool it is still not happening......it wont go past the sony logo..........when i try with SEUS it says i already have the latest software installed...........please help.
Click to expand...
Click to collapse
Please read carefully :
U have to have a rooted and bootloader unlocked in phone to flash ROMs (OBVIOUS )
1)Copy the contents to your SDCARD of phone (ROM ZIP File + gapps ZIP)
2) Extract only the boot.img from the ROM zip to some location in your PC
3) Use Flashtool to flash the boot.img (FIRST THING TO DO)
3.a) Select Fastboot mode from flashtool
3.b) While the phone is connected, Click Fastboot phone using ADB.(Phone will restart and blue led will glow showing its in fast boot mode)
3.c) Now select the option, select kernel to flash in the window and chose the boot.img that is in the PC.
Now the flashtool automatically flashes the boot.img(which has the kernel included).
Unplug from PC and try to reboot.. On booting enter CWM mode and flash the ZIP already placed in the SDCARD(Ensure to follow the appropriate post to follow steps like clearing cache\Dalvik and system etc..).
HAPPY FLASHING
NEO V | PAC MAN 18
Hit Thanks if my words lightened you hair :highfive:
superb PRAVIN89 i think u r a teacher
superb Xplaination
---------- Post added at 01:34 AM ---------- Previous post was at 01:30 AM ----------
superb PRAVIN89 i think u r a teacher :victory::victory::victory::victory::victory:
superb Xplaination
@Sam: Lol. Thanks.. And Nope I'm not a teacher. ... Never had that thought too
Hit thanks if helped
Sent from mt11i
Kuhhan said:
download link..
Click to expand...
Click to collapse
Which link are you looking for? Download link is in first post of op
Sent from my Galaxy Nexus using Tapatalk 2
I think he's just spamming to get to post in Development section
Sent from my MT11i using xda premium

A rom can't be flashed by a noob

Right, I have a rooted Xperia Sola and I want to flash the eXperience ROM, and I don't know how to do that.
The problem is that I can't understand most of the instructions of flashing the ROM, so you guys can help me, please?
Ok, here it goes...
Flash any Stock .54 FTF (use flashtool). Ok, got it...
Let it boot properly. Ok, got it...
Download eXperience.zip and transfer to internal memory. Right.
Flash boot.img from Munjenis v5 CWM kernel.zip (use flashtool). Ok, I can do that...
Now boot to CWM recovery. CWM? WTF?
Flash the eXperience.zip via CWM. What?
You will be entered in AROMA Uh?
Now follow the instructions(Select your device carefully.) select the apps you want to install and remove. Ok.
Again boot to CWM recovery. DAMN CWM...
Do a wipe data/factory reset. What the hell is that?
Wipe Dalvik Cache I don't know...
Turn the phone on and wait for POWER OFF button, when it appears hit the button.Ok.
Click to expand...
Click to collapse
It's just that, I can't understand these words, please, i'll thank if you help me. (I know how to use that button)
Thank in advance.
Man you need get in CWM....!!! Than instal that rom
Sent From C6603 Using xda premium
Um...
Encang_Rojali said:
Man you need get in CWM....!!! Than instal that rom
Sent From C6603 Using xda premium
Click to expand...
Click to collapse
Thank you, but, what is CWM?
manudo said:
Thank you, but, what is CWM?
Click to expand...
Click to collapse
Mannn zzzzzz try read this http://forum.xda-developers.com/showthread.php?t=2273748
Sent From C6603 Using xda premium
CWM stands for Clockwork Mod recovery. You need a recovery installed to install any roms or mods....
CWM is a recovery where you could perform several operations like accessing the system files, system partitions etc, for us and as of now it is needed to install custom ROMs.
So as the first step says, you need to flash .54 version of ICS (ftf file) by flashmode (volume down key and plug in USB at the same time, led will light up green) you need to install flashtools (flashing is done by flash tools) in your pc first
Then there is kernel, that is basically the bridge or interface between the phones hardware and ROM, kernel decides the hardware limits and accessibility to the ROM,
In order to replace stock sony kernels you need an unlocked boot loader (boot loader is locked default by Sony) there are few steps to unlock the boot loader, once you do that you can flash custom kernels (kernel files are like "boot.img" .elf files etc)
To flash them you need to enter fast boot mode ( volume up key and plug in USB, led will light up blue) or there will be flash able zip version which can be flashed by CWM (again recovery, which can be accessed by repeated pressing of volume down at the booting Sony logo), custom kernels have pre installed CWM.
After kernal that is boot.img switch on, on Sony logo press repeatedly volume down lets you enter CWM, you have to perform some wipes, that is data (factory reset, cache, and dalvik cache) after that choose "install zip from SD card" install the ROM.zip file, (assuming you have already put the ROM.zip in your sdcard, ROM = name of the ROM here it is experiencev2) you are done after the installation is complete, reboot and you enter AROMA, its an installer again, follow on screen instructions.
And you have that ROM.
Sent from my Xperia U using xda app-developers app
If you don't read the Guides listed in the General Section, then u won't be able to do stuffs that you want.
Reading helps a lot rather than asking questions.
What i meant, if u read the guides you will get the answers more quickly.
mrmbk said:
CWM is a recovery where you could perform several operations like accessing the system files, system partitions etc, for us and as of now it is needed to install custom ROMs.
So as the first step says, you need to flash .54 version of ICS (ftf file) by flashmode (volume down key and plug in USB at the same time, led will light up green) you need to install flashtools (flashing is done by flash tools) in your pc first
Then there is kernel, that is basically the bridge or interface between the phones hardware and ROM, kernel decides the hardware limits and accessibility to the ROM,
In order to replace stock sony kernels you need an unlocked boot loader (boot loader is locked default by Sony) there are few steps to unlock the boot loader, once you do that you can flash custom kernels (kernel files are like "boot.img" .elf files etc)
To flash them you need to enter fast boot mode ( volume up key and plug in USB, led will light up blue) or there will be flash able zip version which can be flashed by CWM (again recovery, which can be accessed by repeated pressing of volume down at the booting Sony logo), custom kernels have pre installed CWM.
After kernal that is boot.img switch on, on Sony logo press repeatedly volume down lets you enter CWM, you have to perform some wipes, that is data (factory reset, cache, and dalvik cache) after that choose "install zip from SD card" install the ROM.zip file, (assuming you have already put the ROM.zip in your sdcard, ROM = name of the ROM here it is experiencev2) you are done after the installation is complete, reboot and you enter AROMA, its an installer again, follow on screen instructions.
And you have that ROM.
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
Really thanks, man. That helped me a lot! I will flash my phone soon. Thank you.
Sent from my MT27i using xda app-developers app
manudo said:
Really thanks, man. That helped me a lot! I will flash my phone soon. Thank you.
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
That's why we have Q&A section, spread what you know
:thumbup: happy flashing
Sent from my Xperia U using xda app-developers app
question
mrmbk said:
That's why we have Q&A section, spread what you know
:thumbup: happy flashing
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
Do I really need SD Card for flashing a custom ROM?
and gazedCon
Hi,
better to get one do', not expensive and useful loll or buy an xperia P then u don t need an sd card...
When u gonna flash there will be an option select zip from sd card in CWM; or u flash rom with flashtool with the ftf file of your rom, its up to you, or its gonna be actually up to the file you gonna download.
I read a lot before flashing a rom! you better to read some more before doing it, just an advice!
First flash for me a week ago and today im on xperia P
nemesis 5.1 kernel enigma rom 4.4 cwm 6.0.1.2 and bootloadder unlocked be sure i spend hours in front of that screen :laugh:
take it easy
manudo said:
Do I really need SD Card for flashing a custom ROM?
Click to expand...
Click to collapse
Yeah, the ROM.zip file to flash has to be either in the media internal storage or SD card (copy it before flashing the kernel) only then CWM recovery can access the package for installation.
Sent from my Xperia U using xda app-developers app
mrmbk said:
Yeah, the ROM.zip file to flash has to be either in the media internal storage or SD card (copy it before flashing the kernel) only then CWM recovery can access the package for installation.
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
I've asked in the ROM's thread and they say that an external SD card is not needed. I don't know what to do now...
Sent from my MT27i using xda app-developers app
manudo said:
Right, I have a rooted Xperia Sola and I want to flash the eXperience ROM, and I don't know how to do that.
The problem is that I can't understand most of the instructions of flashing the ROM, so you guys can help me, please?
Ok, here it goes...
It's just that, I can't understand these words, please, i'll thank if you help me. (I know how to use that button)
Thank in advance.
Click to expand...
Click to collapse
Once again mate, what you want is to flash a custom ROM.
download the ROM, it may consist of the kernel file “boot.img” inside the ROM.zip or separate links would be there for the kernel.
[These custom kernels have CWM preinstalled]
so here it goes
1. could be as you said, flash .54 ICS firmware, hope you know that.
2. Switch on the device, let it boot. Copy the ROM.zip file in the SD card or internal storage.
3. Switch off, enter fastboot mode (assuming you have an unlocked bootloader)
3. Download the above said kernel, if its in boot.img, use flashtools in fastboot mode (fastboot mode>select kernel to flash) to flash the kernel (so after kernel flashing you have the kernel installed with CWM in it)
4. Switch on, on seeing sony logo, repeatedly press the volume down key, you enter CWM.
5. Perform wipes (for clearing or deleting user data /cache to make it a clean install)
-wipe data
-wipe cache
-advanced>wipe dalvikcache
6. Now on the main menu find “install zip file” access the location where you have stored the ROM.zip file, whether in internal storage or external SD card.
7. Click install, done !
8. Again wipe data and wipe cache
9. Reboot, let it boot
you have new ROM.
try reading more tutorials in the general section if this didnt help you.
mrmbk said:
try reading more tutorials in the general section if this didnt help you.
Click to expand...
Click to collapse
Lmao you re right!
Manudo you really need to read some more tutorials before flashing if you don t understand what you doing that gonna become dangerous for your mobile...
and actually hope you know that the bootloader once unlocked void your warranty... don t mess it up with flashes, read a week more then flash a custom rom!
Anyways we are here if something goes wrong :laugh:
Sorry for being a noob, but I understand, finally...
The boot.ini file is always at the root directory of the zip file, right?
Sent from my MT27i using xda app-developers app
Nope that boot.img or kernel.elf or kernel.sin has to be at the root of the sd card that means in no any folders u drag it n drop it directly on the name of
the drive in windows. Then u flash but before doing it u have to put the rom.zip at the sd card root too...
Got it?
depuis mon Xperia P avec Tapatalk 2
Alx31TLse said:
Nope that boot.img or kernel.elf or kernel.sin has to be at the root of the sd card that means in no any folders u drag it n drop it directly on the name of
the drive in windows. Then u flash but before doing it u have to put the rom.zip at the sd card root too...
Got it?
depuis mon Xperia P avec Tapatalk 2
Click to expand...
Click to collapse
Yeah, but... The CWM part, I read that it's necessary to have the unlocked bootloader to flash the CWM Kernel, I tried but flashtool gave me an error that says that I don't have root access. At the beginning the log says "Root Access Allowed", I can't understand...
Thank you in advance.
Sent from my MT27i using xda app-developers app
Ok
Kernel and cwm its two different things clockwork recovery mode its like a small soft that gonna be useful for you to set up the kernel. The first thing to load on the mobile its the bootloader then kernel then firmware (rom)
A rom that u gonna flash HAS to be compatible with kernel u want to flash
If you want to get your rom rooted i don t think (unless theres a way to do it on ure phone) you can do it with flashtool most of the time you have to downgrade to an older version of your rom cuz root is voluntary blocked by sony to deny u access to it but developpers found weakness in systems but it takes time and sony by updating systems find those weaknesses and fix it.
Then i m not sure u have to get unlocked bootloader to enter flash mode but once again to do it void warranty and to unlock it permit u to flash a custom kernel
So at the end....what u wanted to do? Flash a custom rom?
then if its yes
FIRST OF ALL You unlock bootloader,then put a custom kernel,then a custom rom and for this u look below mrmbk told u how to do it
sent with my perfexperia P using tapatalktak
Right, I have to unlock it...
But, I have that fear to brick the phone, you know?
Sent from my MT27i using xda app-developers app

Xperia U doesn't boot in CWM Recovery, pls advise

Friends, I did following but how hard I try I am not able to get my xperia u boot in CWM Recovery mode to flash any mods or rom, pls advise if I have missed anything.
1. Phone Rooted. 6.1.1.b.1.10 st25i india
2. Bootloader unlocked with process available on Sony official site. Ver updated from 4.0.3 to 4.0.4
3. Installed Cwm Rom Manager
4. Installed Recover X, It gav message successfully installed Cwm recovery.
5. Rom Manager still shows Cwm Recovery version as 5.x.x.x
6. Now not able to boot phone in cwm Recovery mode after restarting and holding/ tapping vol down key.
I am not getting any clue where I am going wrong :-# searching xda for last 1 month but now gave up pls help :'(
Sent from my ST25i using xda app-developers app
Given that you've unlocked your boot loader, you could try flashing one of the custom kernels from the development section. Some (if not all) will come with a recovery pre-installed so you shouldn't need to do anything else.
A couple of examples for ICS-based roms:
Transcendence Kernel
Sliding_XU
Try to install a custom kernel
Sent from my Xperia U using xda premium
Will give it a try
Sent from my ST25i using xda app-developers app
phone not starting
hey guys i facing a problem i installed stock android 4.1.2 ported from xperia p using cwm but after installing it and rebooting phone my phone is not starting its showing sony logo again and again not even going in recovery mode please tell me what to do
amitsunduja said:
hey guys i facing a problem i installed stock android 4.1.2 ported from xperia p using cwm but after installing it and rebooting phone my phone is not starting its showing sony logo again and again not even going in recovery mode please tell me what to do
Click to expand...
Click to collapse
Which ROM is it, link or exact name?
Id your bootloader locked or unlocked?
need help
ChikeD said:
Which ROM is it, link or exact name?
Id your bootloader locked or unlocked?
Click to expand...
Click to collapse
hey bro .. i have xperia u locked bootloader and i installed cwm 6.0.1.2 and then i installed custom rom ultimate z1rom nd later i flashed acid mod it doesn showed me when it restarted it and whn i try to wipe dalvik cache it says
e:unknown volume for path [/sd-ext ]
tell me wot u do
zedsharma said:
hey bro .. i have xperia u locked bootloader and i installed cwm 6.0.1.2 and then i installed custom rom ultimate z1rom nd later i flashed acid mod it doesn showed me when it restarted it and whn i try to wipe dalvik cache it says
e:unknown volume for path [/sd-ext ]
tell me wot u do
Click to expand...
Click to collapse
I get this error too, it's not a problem dalvik-cache is whiped (you should see updating apps next boot).
Didn't understand what the problem is if any beside this message.

Categories

Resources