Hi.
I have this problem with my iphone 4s clone (like these two: Replika iPhone 4S MTK6573 Android 2.3'ü Root Etme and MTK6573 Android 2.3.5 Fake iPhone 4S'in Orijinal ROM Yedeğini Almak in youtube)
I installed an app, the iphone clone locker. Then I open it, it worked for few minutes but when press the home button, it asks me if what i'm going to use, that app or the default one. I click the default(accidentally). But it suddenly shuts down! and wont work til now.
whenever i press the power button to open it, i have this logo. But it keeps on flashing only. It only blinking until it runs out of battery.
I haven't rooted it before that happened. I did everything. Holding the power button+home. Taking out the battery. But no luck. Still see the blinking logo.
I don't what happened, did i bricked my phone? Or it just crashed?
Please heeeelp me. what should i do?
:sorry for my bad english:
try to format/restore
you will loose your data
Figuracion said:
Hi.
I have this problem with my iphone 4s clone (like these two: Replika iPhone 4S MTK6573 Android 2.3'ü Root Etme and MTK6573 Android 2.3.5 Fake iPhone 4S'in Orijinal ROM Yedeğini Almak in youtube)
I installed an app, the iphone clone locker. Then I open it, it worked for few minutes but when press the home button, it asks me if what i'm going to use, that app or the default one. I click the default(accidentally). But it suddenly shuts down! and wont work til now.
whenever i press the power button to open it, i have this logo. But it keeps on flashing only. It only blinking until it runs out of battery.
I haven't rooted it before that happened. I did everything. Holding the power button+home. Taking out the battery. But no luck. Still see the blinking logo.
I don't what happened, did i bricked my phone? Or it just crashed?
Please heeeelp me. what should i do?
:sorry for my bad english:
Click to expand...
Click to collapse
Go into recovery mod and clear cache and data.
:thumbup:
dpk
Sent from my Android Smartphone
dkmali said:
Go into recovery mod and clear cache and data.
:thumbup:
dpk
Sent from my Android Smartphone
Click to expand...
Click to collapse
Whatever I do, i only see the blinking logo. Anything else?
Figuracion said:
Whatever I do, i only see the blinking logo. Anything else?
Click to expand...
Click to collapse
1. download usb vcom driver and extract
2. press and hold vol+ and vol-
3. connect usb to computer
you see that there's a device installing to ur pc,
4. go to device manager find the port (usb single port (com9) or com something.
5. right click and UPDATE DRIVER SOFTWARE-BROWSE MY COM. FOR DRIVER SOFTWARE and find your extracted driver, the file is (xxxxxx.inf) just like that. after finish the intallation your done, and you can flash you mt65xx with SP FLASH TOOL.
reply if you got an error.
sorry for my english.
Related
I'm not able to boot to xrecovery after I've flashed to xCyanogen6-v3.4 on my x10 mini... Anyone can help me?
help
is there anyone hu can lend me a hand here?
If pressing back key doesn't work then you can try this.
Download X10 Flasher by Bin4ry and Androxyde
Connect your phone with pc using usb debugging mode enable
Run X10FlashTool.exe
Go Advance menu
Then xrecovery
Select reboot into xrecovery
Your phone will reboot automatically and start in xrecovery mode
it works... u really did me a big favor... thx a million...
Happy to help.
my phone are the same, aftermodify theme phone stuck on white SE, use the flash tool, dont work, the boot xrecovery is grey cant hit it...what can i do...can not seus to, please help
if flashtools is useless..
I've juz experience this problem where the flashtool is useless as *naisiju1402* said.. try use SEUS then when it asked u to connect the phone, do this..
-at the sony ericsson screen where u stucked, plug in the usb cable n then hold home+back key+power button.. it should be working..
another hint?
jeffreyKimball said:
I've juz experience this problem where the flashtool is useless as *naisiju1402* said.. try use SEUS then when it asked u to connect the phone, do this..
-at the sony ericsson screen where u stucked, plug in the usb cable n then hold home+back key+power button.. it should be working..
Click to expand...
Click to collapse
and if it doesn't work?
I tried to install MiniCM6-1.0.2. to use android 2.2
"something" went wrong during install (sorry it's a long time ago and i can't remember).
now, each time i boot the phone, it runs into android boot logo. after white Sony Ericsson logo.
with usb cable connected, the pc sounds usb dev found, than usb dev disconnected and another usb dev found.
thereafter the android logo, in cool silver with an android circling around the sign with a comet-tail.
until the circling stops and the phone didn't do anything else.
the power key doesn't do anything too, so each time I have to remove the battery.
Is there anything I could do? a special key stroke - or a pen-reset button below anything?
please help.:crying:
Rumo65 said:
and if it doesn't work?
I tried to install MiniCM6-1.0.2. to use android 2.2
"something" went wrong during install (sorry it's a long time ago and i can't remember).
now, each time i boot the phone, it runs into android boot logo. after white Sony Ericsson logo.
with usb cable connected, the pc sounds usb dev found, than usb dev disconnected and another usb dev found.
thereafter the android logo, in cool silver with an android circling around the sign with a comet-tail.
until the circling stops and the phone didn't do anything else.
the power key doesn't do anything too, so each time I have to remove the battery.
Is there anything I could do? a special key stroke - or a pen-reset button below anything?
please help.:crying:
Click to expand...
Click to collapse
Home-button (middle button at the bottom) and Power-button at the same time will give you a hard reboot.
unfortunately not
SmG67 said:
Home-button (middle button at the bottom) and Power-button at the same time will give you a hard reboot.
Click to expand...
Click to collapse
I tried this shortkey several times, different duration. but did not work.
seems to be a hang during OS boot. so, maybe no BIOS or OS shortkey could help.
Is there an option to force an factory default, or did I erase that option during Froyo install try?
thank you for your help :good:
Rumo65 said:
I tried this shortkey several times, different duration. but did not work.
seems to be a hang during OS boot. so, maybe no BIOS or OS shortkey could help.
Is there an option to force an factory default, or did I erase that option during Froyo install try?
thank you for your help :good:
Click to expand...
Click to collapse
That shortkey is a global shortkey, it even works when you get stuck on the kernel-logo (ie, if you didn't have a ROM at all), maybe there's a hardware-problem with your keys.
I rooted the and deleted one of gapps. So, I tried flash and load rom for Alcatel 990 and now phone has bootloop (still displays "alcatel one touch")
Pls, guys help me! I cry, I would like to install clear Android 2.3.6 and run my phone, pls help me. How can I do this?
I have the same problem...pls help us!
maybe your solution
abfiss said:
I have the same problem...pls help us!
Click to expand...
Click to collapse
if you have cwm installed and you can come into it you can try this.
1. get an sdcard and go to this website: link is in the text file
2. download the right backup and set it in the dictory sdcard/clockworkmod/backups
3.try to restore this update with cwm, good luck!!!
let it know if it works. because this is my first session on xda
same problem
i have the same problem, some one please help
the flying dutchman said:
if you have cwm installed and you can come into it you can try this.
1. get an sdcard and go to this website: link is in the text file
2. download the right backup and set it in the dictory sdcard/clockworkmod/backups
3.try to restore this update with cwm, good luck!!!
let it know if it works. because this is my first session on xda
Click to expand...
Click to collapse
2 years ago my alcatel OT-995 got bricked,
I could't even get into the Recovery Mode
(to check if you are able to do it, press PowerButton + VolumeUp and wait until the phone vibrates twice and gets you into Recovery Mode..
Mine would just vibrate once and it stucked on alcatel logo.)
I could find nothing online until I found by myself how to fix this yesterday!
1. First of all you need a full charged battery..
I couldn't charge it with the usb cable as usual because it would turn on and off automatically so the battery would never charge..
The solution to this problem is to get a 2 or 3 dollars universal battery charger from ebay.
You let the battery charge for an hour or 2 and put it back in the phone.
2. Download OneTouchUpgrade
google: "alcatel (your model) one touch upgrade download" and the first result should get you in the official download page.
(I am not allowed to post links)
Download it and nstall the OneTouchUpgrade
Don't open it yet
3. For Alcatel OT- 995:
Press PowerButton + VolumeUp
Release after first vibration
And press immediately VolumeDown until you get into Download mode.
For other models please google how to get in download mode.. but before you do it, follow the next step with your phone turned off as it is.. because it may work like that.. so you won't even have to get into Download mode.
4. Connect phone to pc with usb cable and wait until your pc installs automatically the usb drivers (if it's not already done)
Then open OneTouchUpgrade which you installed before and choose your phone model and press start.
It took me 10 hours for the whole process to get 100%.. So if it seems like it stucked DO NOT unplug the usb cable or stop the process in any other way.
Once completed Unplug the Usb cable and turn on the phone.. give it some time and it should take you to your homescreen
I hope this helps you too!
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
[UPDATE] 2/22/2013 11:00pm gmt
I'm able to boot it only if I have it plugged in. I can only use Power + Volume controllers + Reset buttons. I can enter Recovery Mode but I cannot confirm/click on any selection.
Tablet does not get recognized by the computer in "Flashing Mode".
I forced to install the driver for the "Flashing mode" when the tablet is in recovery mode but programs like MSIFlashtool, RKBatchTool, RKAdnroid. (not sure if i correcly used the last 2... but whatever)
spilot said:
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
Click to expand...
Click to collapse
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Jack Jake said:
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Click to expand...
Click to collapse
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Sent from my ARCHOS 80G9 using Tapatalk HD
Quinny899 said:
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Click to expand...
Click to collapse
ADB doesn't recognize it. I tried holding Power + Reset button and did 'adb devices' on Ubuntu and it didn't show anything. On Windows, if I held these 2 buttons, it would show an unknown device in Device Manager. (Mind you, I don't have the Android SDK on Windows, just Linux.)
I can't access any recovery/download mode. Any combination of buttons (Power+VolDown, Power+VolUp/VolDown, Power+VolUP, Power+Home, Power+Back, Power+Settings) would do nothing.
-----------------------------------------------------------------------------------------------------
This what it does when I press Power + Reset Button with a needle. It boots up, splash screen, and stays on black screen (Btw, in this stage, it's Unknown Device in Windows Manager).Once I let go of Reset or Power button, it shuts down.
Turning it on without holding Reset, it would show splash screen, black screen and turns off in about 2 seconds.
Bump.
I've tried playing with it for some time. I can't get it to stay working without pressing power+reset buttons, it always shuts off...
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Sent from my Enjoy 10 Plus using xda app-developers app
mramzi said:
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Click to expand...
Click to collapse
... I was trying all the time to get it work on the PC without plugging the charger. Anyways~
(Tablet's turned off), I plugged charger, I plugged USB, I turned on the tablet and viola it actually worked and booted into OS. However, no buttons work AT ALL, and touch input doesn't work as well.
I tried to get into Recovery Mode and it worked, but I can go up/down using VolUp/VolDow buttons but I cannot click on any thing because the home button don't work nor any other.
Only Power + VolUp + VolDown + Reset buttons work... What to do now?
TL;DR I want to click on 'Update from SD Card' from the Android Recovery but I couldn't get the 'home' button to click enter on the selection. So what's the solution?
bump.
updates:
I tried to place the firmware from the official website as update.img on an SD Card and placed it in the tablet and went into the recovery mode and selected the 'update from sd card' but i couldn't click it. I tried to tap power, home, search, settings and back and nothing worked.
what I've got up until now:
I can boot into the ROM / RecoveryMod as long as I have the charger plugged in the tablet.
For Ubuntu, when I use the command $ tail -f /var/log/syslog and plug in my tablet, it shows this log http://pastebin.com/pBpBUA2Q (it identifies the tablet) [note, the tablet is booted into the ROM]
Also, if I'm in the recovery mode and I plug in the tablet, it would enumerate the USB... ~,~
Bump
bump
spilot said:
bump
Click to expand...
Click to collapse
Please don't bump your thread more than once in 24 hours, it's against the rules
Sent from my Galaxy Nexus using Tapatalk HD
bump
Hello,
I know it has been long since this thread stopped.
I'm currently in his shoes and for the life of me cannot find anything on the web to help me solve my problem.
My MSI Enjoy 10" Plus was flashed with the wrong MSI Enjoy 10" update. Now the tablet only turns on when in "Recovery Mode", but selecting in that mode is not possible using 10" Plus' buttons. Is there anyone from you good people that can help? Please? Thanks.
Uhm...bump?
Bump? Need help from the experts here. Please. I'm desperate.
Thank you very much in advance.
Hi
I have a lenovo P780 dual SIM phone puchased in India.
Im not sure if it was the 4/8GB model. This phone however had a Chineese bootloader.
The phone used to restart and hang randomly even during calls. now where i live there is no lenovo service center and my phone last night shutdown completely not even turing on anymore
When you insert USB cable/charger the phone shows a red LED light meaning it might be charging i think. I downloaded SP Flash Tool and read about what it is used for etc etc.
I cant get this phone to turn on. also i cant get it to be detected by my computer there is no USB connect / disconnect sounds when i plug it on my pc hence i dont believe the SP Tool can will be able to do any thing. and the bloody battery is non removable !!!
I installed the MTK65XX /6589 drivers by force on my system via device manager but still nothing is detected.
is there a way to jump start this phone or do some random combinations ? or ???????????
please help asap on what can be done to get this phone
Also i tried installed the drivers for MediaTek USB etc etc is this what im supposed to see on my device manager or is there something wrong ?? see attached pic.
Also the MediaTek PreLoader USB VCOM driver says "fails to start" and if i do an update on it it gives that error and disapears. is everything how its meant to be?
dead soul said:
Hi
I have a lenovo P780 dual SIM phone puchased in India.
Im not sure if it was the 4/8GB model. This phone however had a Chineese bootloader.
The phone used to restart and hang randomly even during calls. now where i live there is no lenovo service center and my phone last night shutdown completely not even turing on anymore
When you insert USB cable/charger the phone shows a red LED light meaning it might be charging i think. I downloaded SP Flash Tool and read about what it is used for etc etc.
I cant get this phone to turn on. also i cant get it to be detected by my computer there is no USB connect / disconnect sounds when i plug it on my pc hence i dont believe the SP Tool can will be able to do any thing. and the bloody battery is non removable !!!
I installed the MTK65XX /6589 drivers by force on my system via device manager but still nothing is detected.
is there a way to jump start this phone or do some random combinations ? or ???????????
please help asap on what can be done to get this phone
Also i tried installed the drivers for MediaTek USB etc etc is this what im supposed to see on my device manager or is there something wrong ?? see attached pic.
Also the MediaTek PreLoader USB VCOM driver says "fails to start" and if i do an update on it it gives that error and disapears. is everything how its meant to be?
Click to expand...
Click to collapse
Actually MTK device are nearly unbrickable. Last time my P780 flashing process was interrupted at the middle of flashing (PC hangs).My heartbeat stops at the moment but thank god my phone didn't brick.
Firstly, did you installed the correct drivers? If the LED still lit that means your phone haven't brick yet.
Download the drivers here and follow the instruction. This guide should help you fix your phone.
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
soralz said:
Actually MTK device are nearly unbrickable. Last time my P780 flashing process was interrupted at the middle of flashing (PC hangs).My heartbeat stops at the moment but thank god my phone didn't brick.
Firstly, did you installed the correct drivers? If the LED still lit that means your phone haven't brick yet.
Download the drivers here and follow the instruction. This guide should help you fix your phone.
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
Click to expand...
Click to collapse
thanx for the response and the thread u pointed me to. but my phone doesnt even show on device manager and there is no any USB sounds like u know when u insert a USB flash drive u hear sounds? when i insert my phone no sounds. but only red led light of charging i think is showing. it is strange such a phone can just kill itself !! it was never dropped, inserted in water.. always was in good hands and even has a good cse + screen protector !!!
i will will format another PC and do everything driver installation from scratch. in the mean time let me know what else can be done cause i have done all in that thread u sent me.
thanx
dead soul said:
Hi
I have a lenovo P780 dual SIM phone puchased in India.
Im not sure if it was the 4/8GB model. This phone however had a Chineese bootloader.
The phone used to restart and hang randomly even during calls. now where i live there is no lenovo service center and my phone last night shutdown completely not even turing on anymore
When you insert USB cable/charger the phone shows a red LED light meaning it might be charging i think. I downloaded SP Flash Tool and read about what it is used for etc etc.
I cant get this phone to turn on. also i cant get it to be detected by my computer there is no USB connect / disconnect sounds when i plug it on my pc hence i dont believe the SP Tool can will be able to do any thing. and the bloody battery is non removable !!!
I installed the MTK65XX /6589 drivers by force on my system via device manager but still nothing is detected.
is there a way to jump start this phone or do some random combinations ? or ???????????
please help asap on what can be done to get this phone
Also i tried installed the drivers for MediaTek USB etc etc is this what im supposed to see on my device manager or is there something wrong ?? see attached pic.
Also the MediaTek PreLoader USB VCOM driver says "fails to start" and if i do an update on it it gives that error and disapears. is everything how its meant to be?
Click to expand...
Click to collapse
Ok... Lets try to help you.
First download the firmware from here:
http://forum.xda-developers.com/lenovo-p780/development/life-0-7-8gb-lenovo-p780-t2738560
Step by step you wil do this:
>>>>> USE WINDOWS 7 FOR THIS TUTORIAL <<<<<<<<<<<
>>>>>>>>>>REMOVE THE USB CALBLE FROM PHONE! <<<<<<<<<<<<<
NOW:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6589_Android_scatter_emmc.txt in ROM from target_bin folder
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model SKIP THIS STEP IFF SELECTED
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone - skip this step is allready powered off
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and ONLY NOW connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on!
After this tell me iff something goes wrong !
stympy said:
Ok... Lets try to help you.
First download the firmware from here:
http://forum.xda-developers.com/lenovo-p780/development/life-0-7-8gb-lenovo-p780-t2738560
Step by step you wil do this:
>>>>> USE WINDOWS 7 FOR THIS TUTORIAL <<<<<<<<<<<
>>>>>>>>>>REMOVE THE USB CALBLE FROM PHONE! <<<<<<<<<<<<<
NOW:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6589_Android_scatter_emmc.txt in ROM from target_bin folder
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model SKIP THIS STEP IFF SELECTED
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone - skip this step is allready powered off
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and ONLY NOW connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on!
After this tell me iff something goes wrong !
Click to expand...
Click to collapse
Thanx for the help, I will have to try this tomorrow as it's late ryte now.
However after leaving the phone untouched for 2 days or so I did do already what you said before but add this phone battery is non removable I pressed the small red reset button holding it with power button then plugged to laptop then only released the red reset button and hold the power button that's when it got detected and during this time the sp flash tool was already on with scatter file chosen etc etc and I had clicked the download button do it moved quickly with red bar then stopped didn't continue when I saw the error/error log something to do with time out so I think maybe the battery was low
So when flashing occurs in these phones do we need a charged battery or not?? As with other tutorials they say sometimes we have to remove and re insert the battery but my phone model battery is non removable..I'm planning to open it and disconnect and reconnect again
Leaving phone charge over night just incase.cause problem it just doesn't switch on.but red LED is showing when charger is connected
Sent from my GT-I9505 using Tapatalk
dead soul said:
Thanx for the help, I will have to try this tomorrow as it's late ryte now.
However after leaving the phone untouched for 2 days or so I did do already what you said before but add this phone battery is non removable I pressed the small red reset button holding it with power button then plugged to laptop then only released the red reset button and hold the power button that's when it got detected and during this time the sp flash tool was already on with scatter file chosen etc etc and I had clicked the download button do it moved quickly with red bar then stopped didn't continue when I saw the error/error log something to do with time out so I think maybe the battery was low
So when flashing occurs in these phones do we need a charged battery or not?? As with other tutorials they say sometimes we have to remove and re insert the battery but my phone model battery is non removable..I'm planning to open it and disconnect and reconnect again
Leaving phone charge over night just incase.cause problem it just doesn't switch on.but red LED is showing when charger is connected
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
OK. Let it charge to full. Then try again and tell me what is says.
stympy said:
OK. Let it charge to full. Then try again and tell me what is says.
Click to expand...
Click to collapse
Ok will do.Thanx
Sent from my GT-I9505 using Tapatalk
stympy said:
OK. Let it charge to full. Then try again and tell me what is says.
Click to expand...
Click to collapse
I fully charged it
- Not switching on
- Only red LED when charger connected
- connected to laptop on different USB ports not detected
- tried connecting with different combinations not detected by laptop
But all drivers installed !
Battery is non removable !!!!
Any better ideas??
Sent from my GT-I9505 using Tapatalk
dead soul said:
I fully charged it
- Not switching on
- Only red LED when charger connected
- connected to laptop on different USB ports not detected
- tried connecting with different combinations not detected by laptop
But all drivers installed !
Battery is non removable !!!!
Any better ideas??
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Lets try this:
1. Open the phone case
2. Insert the cable in the USB port
3. Open Flash Tool
4. Select dadl and all that then pres Upgrade
5. Now press the little red button from the back of the phone and wait about 20 seconds and something must goin on. Iff not point 6.
6. tell me what is going on!
stympy said:
Lets try this:
1. Open the phone case
2. Insert the cable in the USB port
3. Open Flash Tool
4. Select dadl and all that then pres Upgrade
5. Now press the little red button from the back of the phone and wait about 20 seconds and something must goin on. Iff not point 6.
6. tell me what is going on!
Click to expand...
Click to collapse
I tried what you said and after fiddling for a while the phone managed to get detected by the SP Flash Tool then it got flashed by the SP Flash Tool for some reason a yellow circle came up and the USB seemed like it got disconnected automatically
i just left the machine and the phone+SP Flash tool as they are hoping to get that green circle.. bu nothing happen !!! phone is black screen just like dead... after fiddling again multiple times with key cobinations .. i managed to get it boot with the below procedure
pressed the small reset button, press both volume up and down + power button altogether then released the small red button for after maybe around 10 seconds and while the others are pressed !! then the phone booted !!
and ontop of that it booted with the lenovo logo and the slogan i believe "for thos who do" stayed for a while kinda flashing itself i think.. but no progress bar.. I almost thought i was on some boot loop maybe or soft brick but luckily it booted into the russian Life ROM I flashed after that phone went to homes screen and just died again !!!!!!!!!!!
im thinking maybe it may be a hardware issue?? or ??
dead soul said:
I tried what you said and after fiddling for a while the phone managed to get detected by the SP Flash Tool then it got flashed by the SP Flash Tool for some reason a yellow circle came up and the USB seemed like it got disconnected automatically
i just left the machine and the phone+SP Flash tool as they are hoping to get that green circle.. bu nothing happen !!! phone is black screen just like dead... after fiddling again multiple times with key cobinations .. i managed to get it boot with the below procedure
pressed the small reset button, press both volume up and down + power button altogether then released the small red button for after maybe around 10 seconds and while the others are pressed !! then the phone booted !!
and ontop of that it booted with the lenovo logo and the slogan i believe "for thos who do" stayed for a while kinda flashing itself i think.. but no progress bar.. I almost thought i was on some boot loop maybe or soft brick but luckily it booted into the russian Life ROM I flashed after that phone went to homes screen and just died again !!!!!!!!!!!
im thinking maybe it may be a hardware issue?? or ??
Click to expand...
Click to collapse
Hi ! When Life ROM is flashing, no progres barr appears. Did you tried to remain on Life rom ? At least for a week ? Before you go in a service store try to stay with Life and iff this bug appears again go to service store.
stympy said:
Hi ! When Life ROM is flashing, no progres barr appears. Did you tried to remain on Life rom ? At least for a week ? Before you go in a service store try to stay with Life and iff this bug appears again go to service store.
Click to expand...
Click to collapse
I mean the ROM is still in there !! And the phone is just acting up again. Not booting..I think it's hardware. not software....,!! Will leave it for like a day or two and try booting it / flashing once more...oh and we have service centers my country where currently at
Sent from my GT-I9505 using Tapatalk
Yes. Seems to me is a hardware problem. Please let me know what was the problem iff you go with the phone in service. Good luck.
Sent from my Lenovo P780 using XDA Free mobile app
stympy said:
Yes. Seems to me is a hardware problem. Please let me know what was the problem iff you go with the phone in service. Good luck.
Sent from my Lenovo P780 using XDA Free mobile app
Click to expand...
Click to collapse
Oh I meant to say we don't have a service center in my country...typo using Swype keyboard lol
Sent from my GT-I9505 using Tapatalk
dead soul said:
Oh I meant to say we don't have a service center in my country...typo using Swype keyboard lol
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
That's a big problem indeed. Try to contact the sales store. Maybe they can help you.
Sent from my Lenovo P780 using XDA Free mobile app
stympy said:
That's a big problem indeed. Try to contact the sales store. Maybe they can help you.
Sent from my Lenovo P780 using XDA Free mobile app
Click to expand...
Click to collapse
Oh I just realised you are using the same Lenovo P780.from you're signature
Sent from my GT-I9505 using Tapatalk
dead soul said:
Oh I just realised you are using the same Lenovo P780.from you're signature
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Yes. Indeed i use very mutch this phone.
Sent from my Lenovo P780 using XDA Free mobile app
stympy said:
That's a big problem indeed. Try to contact the sales store. Maybe they can help you.
Sent from my Lenovo P780 using XDA Free mobile app
Click to expand...
Click to collapse
I opened the phone today removed the battery...plugged into laptop, then did various tricks of key combinations with and without the battery still phone seems dead !! I guess the owner will send the phone back to India for repairs...or where you from do they sell motherboards for this model? If Yes can you send me website link even if it's in your local language if available want to compare prices... will use Google translator to translate if not in English
Sent from my GT-I9505 using Tapatalk
dead soul said:
I opened the phone today removed the battery...plugged into laptop, then did various tricks of key combinations with and without the battery still phone seems dead !! I guess the owner will send the phone back to India for repairs...or where you from do they sell motherboards for this model? If Yes can you send me website link even if it's in your local language if available want to compare prices... will use Google translator to translate if not in English
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Aliexpres.com
stympy said:
Lets try this:
1. Open the phone case
2. Insert the cable in the USB port
3. Open Flash Tool
4. Select dadl and all that then pres Upgrade
5. Now press the little red button from the back of the phone and wait about 20 seconds and something must goin on. Iff not point 6.
6. tell me what is going on!
Click to expand...
Click to collapse
while trying to repartition MIUI v6 on my p780 it happened to me.
for once i thought it's gone "usb not recognised error, no device detected on sp flashtool" :crying:
but thanx to your reset button method :good:
m back again :victory:
Hi ,
So I got a pendopad 7 from dodo car insurance promotion and while I was trying to remove kingroot and replace with supersu , I think something went wrong and now tablet is in a weird state. It boots up to show nothing but if press and hold power button I can see option to turn off the tablet. I am assuming its something to do with systemui.apk , I was wondering if there is a way to fix it without rom install as I dont have any backup or the image to restore this tablet.
Its A-33 Quadcore Pendopad 7 PNDP51M7BLK
Ram 1 gb
Android 5.1.1
1024 x 600 px
http://www.pendo.com.au/pendopad-7-q...k-pndp51m7blk/
If anyone has this tablet or rom or any method to bring it back to life. Any help is appreciated.
I can acces the normal recovery on the tablet and have tried resetting it but doesnt help .I cant find the factory image for this device
Thanks
any help please ????????????
max414 said:
any help please ????????????
Click to expand...
Click to collapse
You may need more knowledge about this but here is what you can do
DON'T PLUG IN THE DEVICE INTO THE PC YET
Install Phoenix Suit and click the firmware button
Find a firmware image for your tablet. (most likely at chinagadgetsreviews.blogspot.com )
Hold down the power button for 10 seconds and let the tablet sit for 10-20 seconds to insure it is completely off.
ON THE DEVICE:
1: Hold ANY button that is not the power button
2: while still holding the other button, plug in the device to the computer
KEEP HOLDING IT DOWN
3: RIGHT after you plugged the microusb press the power button really quickly around 4 or 8 times and on the computer Phoenix Suite will ask you this:
Tip: Does Mandatory Format?
Click Yes
Click Yes again
It will install the new firmware, if it shows no progress for more than 6 minutes you don't have the right firmware image.
HOPE THIS HELPS
Oh yeah, you will need to re-root the device with KingoRoot PC, and Wifi, or Bluetooth may not work anymore. Sorry about that.