as is stated in the title, i edited an apk, framework-res to be precise using winrar, without extracting ( i just added a new res folder and removed the former one , without changing the names of any of the images ) and using rootexplorer, replaced the original framework-res.apk, immediately my phone restarted and has been in a boot-loop eversince.
to compound the problem, when trying to see if the cwm recovery for another phone with the same chipset as my phone could work, i mistakenly deleted my recovery, and the usb debuggging was off when the phone began bootlooping. i can only boot into fastboot mode, the phone is a tecno t3 ( not popular i know ) but every help will be appreciated.
insulting me wont help, so please only constructive answers. and i promise to ht thanks for every constructive answer. thanks in advance.
tecno1 said:
as is stated in the title, i edited an apk, framework-res to be precise using winrar, without extracting ( i just added a new res folder and removed the former one , without changing the names of any of the images ) and using rootexplorer, replaced the original framework-res.apk, immediately my phone restarted and has been in a boot-loop eversince.
to compound the problem, when trying to see if the cwm recovery for another phone with the same chipset as my phone could work, i mistakenly deleted my recovery, and the usb debuggging was off when the phone began bootlooping. i can only boot into fastboot mode, the phone is a tecno t3 ( not popular i know ) but every help will be appreciated.
insulting me wont help, so please only constructive answers. and i promise to ht thanks for every constructive answer. thanks in advance.
Click to expand...
Click to collapse
You can still do a task 29, which erases the clk or magldr, reinstall those, and install recovery in that sequence, then of course you can flash a new ROM
did you get out of the boot loop. am willing to help stay in touch
tecno1 said:
as is stated in the title, i edited an apk, framework-res to be precise using winrar, without extracting ( i just added a new res folder and removed the former one , without changing the names of any of the images ) and using rootexplorer, replaced the original framework-res.apk, immediately my phone restarted and has been in a boot-loop eversince.
to compound the problem, when trying to see if the cwm recovery for another phone with the same chipset as my phone could work, i mistakenly deleted my recovery, and the usb debuggging was off when the phone began bootlooping. i can only boot into fastboot mode, the phone is a tecno t3 ( not popular i know ) but every help will be appreciated.
insulting me wont help, so please only constructive answers. and i promise to ht thanks for every constructive answer. thanks in advance.
Click to expand...
Click to collapse
am willing to help you out stay in touch
tecno1 said:
i promise to ht thanks for every constructive answer. thanks in advance.
Click to expand...
Click to collapse
well I don't believe that since 2 answers are already there and no thanks at all..!!
Hey wen you edit the framework-res.apk be carefull unless you know wat you are doing. I prefer you send me the copy of framework-res.apk and i lll try to correct any mistake done on it. Framework res hold resources to be used by the whole system. Like even the Android keyboard need some resources to oparate. All icons you see on Android are are stored in framework res. Eg the battery status icons, network state icon, data connectivity icons. Zoom icons. Power off dialog icon etc. Each resource is marked by an identifyer. Eg 0x9898ed5
So if you edit it and the resource missmatch happens. Thats a boot loop
Sent from my TECNO N3S
Fixed
Griffins_Oringo said:
am willing to help you out stay in touch
Click to expand...
Click to collapse
I returned it to the manufacturer and they flashed the ROM back but it isn't rooting now.
Griffins_Oringo said:
am willing to help you out stay in touch
Click to expand...
Click to collapse
just took back to the manufacturer and they reflashed the ROM
Related
So... the change of LCD Density failed xD
Such a bad time, right at the time i was about to sleep, damm it!
LG P500 unbranded "C" firmware with stock, rooted 2.2 [Froyo]
so far, i know that LCD Density changer, changes a value inside proc.amp ... so that file might be "corrupted" or not supported and my cellphone cannot boot now!
[Stuck at android boot logo after LG's splash]
The phone opens up normally, being charged over USB or stock charger.
1) is there any way i can put the original proc.amp file on system?
2) i suppose i just lost all my settings, sms, apps if 1) cannot be done, right?
[totally stock LG P500, rooted only! no custom things, flashes, etc etc]
Im in need of help here, so make it as noob friendly as it gets...
thanx in advance!
morx said:
So... the change of LCD Density failed xD
Such a bad time, right at the time i was about to sleep, damm it!
LG P500 unbranded "C" firmware with stock, rooted 2.2 [Froyo]
so far, i know that LCD Density changer, changes a value inside proc.amp ... so that file might be "corrupted" or not supported and my cellphone cannot boot now!
[Stuck at android boot logo after LG's splash]
The phone opens up normally, being charged over USB or stock charger.
1) is there any way i can put the original proc.amp file on system?
2) i suppose i just lost all my settings, sms, apps if 1) cannot be done, right?
[totally stock LG P500, rooted only! no custom things, flashes, etc etc]
Im in need of help here, so make it as noob friendly as it gets...
thanx in advance!
Click to expand...
Click to collapse
Try to connect to phone via adb shell (how-to about adb look on http://forum.xda-developers.com/showthread.php?t=900905 ) Try to connect during start up time to time. If this will not work, you will have to do update via KDZ and you will lost every data, which was not stored in SDcard.
Thanks for fast answer buddy!
Adb didnt work, so i used that guide for bricked phones succesfully!
Aparrently there is much work to do now, reinstalling all i had... but nevermind, we learn from mistakes
morx said:
Thanks for fast answer buddy!
Adb didnt work, so i used that guide for bricked phones succesfully!
Aparrently there is much work to do now, reinstalling all i had... but nevermind, we learn from mistakes
Click to expand...
Click to collapse
This is reason why I bought Titanium Backup - in pro version you can do backups automatically at night. It saves my ass many times and I had my money back after first usage.
Yes indeed, never thought that things will be that bad, so ... here we are now
Dear friends!
My Sony Tablet S is bricked, I cannot doing anything now, all I can now is accessing recovery mode.....I need an original firmware for Sony tablet S, please help me if you have. I have tried some update firmware... but it's not works. Please help me, my tablet is like a brick now..
Dear neo.sys,
if You have only root your tablet and not find in this forum a file to recovery from sd card your system (there are some file that you can test searching in similar problem) You can only attend a Sony tablet upgrade to ICS and search again in this forum....
but if You are in valid assistance period contact with email Sony assistance (say it only the problem that You have not cause) and they retired your tablet and repair it free of charge; for now is this....
...
That's mean I will put my tablet S back in a box and waiting for next upgrade?
I just bought it yesterday....what the...!
I have updated 3.1 with OTA, root and using SystemApps Remover to remove some system application. And now.. it's brick. Is there any way to get back in the original firmware? (My original firmware is broken also)
Totally dead??
neo.sys said:
That's mean I will put my tablet S back in a box and waiting for next upgrade?
I just bought it yesterday....what the...!
I have updated 2.3.1 with OTA, root and using SystemApps Remover to remove some system application. And now.. it's brick. Is there any way to get back in the original firmware? (My original firmware is broken also)
Totally dead??
Click to expand...
Click to collapse
The question is - have you made 'rescue-backdoor'?
(lower value of build.prop incremental)
If yes - we can help you. If no - wait for ICS.
br
condi
Test this ( with main connect; this delete all your data and app and root !!):
1) turn off tablet
2) press together button on and vol+; at Sony logo relase vol+
3) at new screen select "reset to factory setting" with button vol- and vol+
4) press button on to conferme
5) select "Yes delete all user data" with button vol- and vol+
6) press button on to conferme
7) tablet restart with a reset to default if have a chance...
but if You have buy it yesterday a new tablet You can have a Sony assistance...
...
Dear Condi and Gonzo!
Thanks for your reply, I think may be it's unlucky day of me
1. I do not making a 'rescue-backdoor'
2. I have tried using Receovery Mode to factory resetting it. It's worked but system program (that I remove it when using System Apps Remover) do not exits, because I remove S-launcher so.. I cannot access a home menu.... Can not doing anything.
This is my About Tablet S
Android Version 3.2.1 (Release 2)
Kernel 2.6.36.3
Build NUmber THMAS0012400
Is there anyway for re-flashing this tablet with original factory firmware? I don't need ICS, only need 3.2 ....
neo.sys said:
Dear Condi and Gonzo!
Thanks for your reply, I think may be it's unlucky day of me
1. I do not making a 'rescue-backdoor'
2. I have tried using Receovery Mode to factory resetting it. It's worked but system program (that I remove it when using System Apps Remover) do not exits, because I remove S-launcher so.. I cannot access a home menu.... Can not doing anything.
Click to expand...
Click to collapse
Boot your tab in normal way, if it boots ok, even without stock launcher, with black-screen, it should still be accessable via adb.
Check if 'adb shell' works. If yes - it can be fixed easly.
br
condi
Dear Codi!
Yes, I adb shell work... Please show me how to fix it... I'm very appreciated that
Do you have the status bar (with the wifi and battery indicators) on the bottom of the screen after deleting data and reset to factory from recovery and reboot?
If yes, you can access the paremeters menu and choose "accessibility". You will be asked if you want to download an accessibility app. Say yes and you will be in the market. Ask for a launcher of your choice and install it. Then you will be able to install a text editor, edit build.prop and get an OTA update but be carefull, you may download the unrootable kernel 10!
Maybe you can also ask here for the s-launcher APK and install it from recovery with adb... I can't retrieve it since my tablet isn't rooted (kernel 10)...
Good luck!
Sorry Condi, I haven't seen that you're handling the thing because I was typing my post while you were answering!
neo.sys said:
Dear Codi!
Yes, I adb shell work... Please show me how to fix it... I'm very appreciated that
Click to expand...
Click to collapse
making a fix for you, just wait a few min..
Does anybody here have s-launcher APK? I really need it and please show me how to install it from adb
I really hate this ...
first ignore every hint regarding backdoor and recovery ...
did deep changes in the system and brick the device ...
afterwards crying and asking for support (our time) ...
OMG ... first of all you can go to the Google Play market and install from there a alternative launcher like GoLauncher HD and RootExplorer ...
In a next step you can ask here for the original s-launcher file and copy it back to /system/app
but to be honest ... how du.. must I be to delete the only launcher on a system?
@Condi
Good morning my friend .. how are you?
I admire your helpfulness ...
but IMHO we should ignore such a lazy guy if they ignore all our hints.
Have a nice day and best wishes to Magda.
done.
unpack, run, be happy
obicom said:
@Condi
Good morning my friend .. how are you?
I admire your helpfulness ...
but IMHO we should ignore such a lazy guy if they ignore all our hints.
Have a nice day and best wishes to Magda.
Click to expand...
Click to collapse
hi friend, you're right, but today I have a good mood lol
thanks, and you too
obicom said:
I really hate this ...
first ignore every hint regarding backdoor and recovery ...
did deep changes in the system and brick the device ...
afterwards crying and asking for support (our time) ...
OMG ... first of all you can go to the Google Play market and install from there a alternative launcher like GoLauncher HD and RootExplorer ...
In a next step you can ask here for the original s-launcher file and copy it back to /system/app
but to be honest ... how du.. must I be to delete the only launcher on a system?
Click to expand...
Click to collapse
Dear Obicom!
I really don't want to be here for bordering anybody, I facing a problem, and I searching a lot of time until I decide to asking for support here, actually Tablet S is very new, and I still want to play with it. I just bought it yesterday, and still excited to discovering it until now... I'm brick... Sorry if I border anybody here
Dear Codi!
I'm very thank your helping it's working now..... I don't know how to say thank you to you, Can I buy you a beer? Please check your Paypal, it's not much... but that's show my appreciate your helping me
Hi neo.sys
I hope now you have learned from it ... take the time and read our hints...
implement ALL rescue and recovery steps from Condis awesome AIO tool ...
Would you play with your new car ... dismount the breaks .. and drive to the next highway?
Be careful with your new device and respect our private time and effort ..
it is only our hobby and we get no money for the support ...
@Condi
I have a bad mood today .. maybe the reason why I am so impolite
Have a nice day and cheers ..
neo.sys said:
Dear Codi!
I'm very thank your helping it's working now..... I don't know how to say thank you to you, Can I buy you a beer? Please check your Paypal, it's not much... but that's show my appreciate your helping me
Click to expand...
Click to collapse
No problem I'm glad that your tab is working. Thanks for the beer
Now, before you make any system modifications - run AiO tool, and make rescue-backdoor. It will give you possibilty to reflash your current firmware,
if you will mess something.
basis Dnammi
@obicom
Thanks for your advice, I understand what is the problem I facing now, and I will never give up it again.
@condi
Thanks again for your help.
Woo hoo! I'm happy condi was able to help you out
Hi all,
Just flashed the jellyblast rom onto my s5830i, it's all working except I've got no signal/service.
I've been reading around and found that I might have to install a radio? If so, does anyone have any help as to which one?
Any help much appreciated, or if you need more info please ask.
Cheers,
Jack.
jackpf said:
Hi all,
Just flashed the jellyblast rom onto my s5830i, it's all working except I've got no signal/service.
I've been reading around and found that I might have to install a radio? If so, does anyone have any help as to which one?
Any help much appreciated, or if you need more info please ask.
Cheers,
Jack.
Click to expand...
Click to collapse
Well I'm using jelly blast no problem... I'm guessing you're using 3.0.5 (latest) did you first flash 3.0.4? If not i suggest going back to stock then 3.0.4 then .5
You might of had some random conflict if you flashed from another custom ROM to Jelly Blast
Also what do you mean radio?
The app? That's included in Jelly Blast, well it is in 3.0.4 (that's what I'm using)
Oh and apparently I'm now meant to tell people to ask questions and stuff in the sticky thread (The one by "iamareebjamal"), or post this in the jelly blast thread to help keep the general section free from spam
The usual Xx James xX only on mobile (XDA Premium)
I think you've lost your IMEI (don't worry it's not lost, this rom somehow can't read your IMEI number). Please check your IMEI number by using *#06# on call screen.
If you can't see your IMEI number, install GalaxyToolbox and check the IMEI from there. If you can see the IMEI from GalaxyToolbox, it means IMEI is still there but rom can't read it.
Please install any other rom. (you can/should backup your IMEI by using GalaxyToolbox before doing anyting on your system)
jelly blast no service fix
Download these two files
Search Google for them I would attach links but I'm not allowed
(kernel-201211201515-E3-boot.zip)
(modulos201211201515-modules.zip)
1. copy the 2 zip files to your SD card
2.then boot the phone in recovery
3. Install the two packages one after the out her
4. Reboot
Your phone should now connect to your mobile network and you should be able to call and text
stuck on boot animation :'(
man wtf stuck on samsung logo only!!:crying:
sam_shah said:
man wtf stuck on bootanimation only!!:crying:
Click to expand...
Click to collapse
Flash stock rom via odin
sam_shah said:
man wtf stuck on samsung logo only!!:crying:
Click to expand...
Click to collapse
What version of the jellyblast rom are you running? Try downgrading the version before the one you are using and repete the steps (do it all at once) try this and post the results
unbricked...and rooted even but not able to install any new ROMs
When i install any new ROMs by CWR then only samsung logo apears with my phone model number..waited for 30 mins no action then back to stock !! Familliar to Rooting nd ROMs in HTC phones.. but wishing to learn for Samsung SGH-s5830i (ace)
Bricked my phone. Need help now
guppysir said:
Download these two files
Search Google for them I would attach links but I'm not allowed
(kernel-201211201515-E3-boot.zip)
(modulos201211201515-modules.zip)
1. copy the 2 zip files to your SD card
2.then boot the phone in recovery
3. Install the two packages one after the out her
4. Reboot
Your phone should now connect to your mobile network and you should be able to call and text
Click to expand...
Click to collapse
Thanks for bricking my phone.....
it doesn't work my phone can't go into CMW or boot now i would be extremely grateful for some help please.
@jrtbing, lets dig some graveyard mate, shall we First of all jellyBlast was band from XDA ages ago ( not to be mention there are far more sophisticated stable Rom @ Dev sub forum)
As for your problem goes, please remove your battery for ~1 Minute ( don't make any difference though, just for discharging purposes ).
put it back and try press and hold the Volume Up + Home keys and then long press the Power key till the start up screen with “Samsung Galaxy Ace GT-S5830i″ logo blinks for two times and you see your desired recovery screen.
If the combo keys provided don't be effective ( due to possible boot loop, corruption of your partitions; kernel ,,etc,,etc,,) we need to check your download mode by pushing (Volume(+) + Volume(-) + Power) simultaneously ,, still no use,, You probably hard-bricked your device mate. USB jig might be your last solution to force your device get into Download mode, nothing will be guaranteed though.
Please be patient,& Gentle with me, I'm new here,,, (TY) Hi, I have a Pantech P9060 (old I know ) Android 2.3.4 , Gingerbread( Stock Rom). It's rooted. It will turn on, load in the boot screen- and stop there, and if I touch the power/menu keys, it will start the loop acting boot process, without re-starting the phone , just continuous boot screen. I have changed the boot screen probably 3/4 times from the original AT&T screen using Jimmy Rummel apps, Rom Installer . I've tried returning back from backup, Titanium Pro, I backed up to google drive as well, but regardless I can't seem to reset to factory( which I've done before), or even update, Nothing.. It's so frustrating. I've searched these forums inside out for a solution as to not bother you guys with my old phone issues, but I have to admit, I need help with this. I don't think it's hard bricked, I'm thinking I may have flashed the wrong Rom( im not sure though) trying to upgrade from 2.3.4 .. Not positive though. I sure hope there's someone to help me here, It wont connect to the PC syncing, Pantech PC Suite, yet my pc shows the phone in Device Manager and Computer. So I'm hoping I've done something simple, :/ stupid,,but simple. Anyone help me out ? Rooted Apps & System info/apps on my phone are in a File Manager > xposed, bootmanager, clockworkmod, rom mod installer pro, Titanium Pro, and others...Can it someway be just flashed to a new rom of some version? :crying: Thanks in advance.......
Cedar1111 said:
Please be patient,& Gentle with me, I'm new here,,, (TY) Hi, I have a Pantech P9060 (old I know ) Android 2.3.4 , Gingerbread( Stock Rom). It's rooted. It will turn on, load in the boot screen- and stop there, and if I touch the power/menu keys, it will start the loop acting boot process, without re-starting the phone , just continuous boot screen. I have changed the boot screen probably 3/4 times from the original AT&T screen using Jimmy Rummel apps, Rom Installer . I've tried returning back from backup, Titanium Pro, I backed up to google drive as well, but regardless I can't seem to reset to factory( which I've done before), or even update, Nothing.. It's so frustrating. I've searched these forums inside out for a solution as to not bother you guys with my old phone issues, but I have to admit, I need help with this. I don't think it's hard bricked, I'm thinking I may have flashed the wrong Rom( im not sure though) trying to upgrade from 2.3.4 .. Not positive though. I sure hope there's someone to help me here, It wont connect to the PC syncing, Pantech PC Suite, yet my pc shows the phone in Device Manager and Computer. So I'm hoping I've done something simple, :/ stupid,,but simple. Anyone help me out ? Rooted Apps & System info/apps on my phone are in a File Manager > xposed, bootmanager, clockworkmod, rom mod installer pro, Titanium Pro, and others...Can it someway be just flashed to a new rom of some version? :crying: Thanks in advance.......
Click to expand...
Click to collapse
Don't think that there are any custom updates. I found this: https://www.youtube.com/watch?v=-IOQJJCSKC4 - Sorry it's not in English, but it's the only thing I found that actually had a download of the rom. Even Pantech doesn't seem to have anything besides the manual and drivers for it.
Thanks
es0tericcha0s said:
Don't think that there are any custom updates. I found this: - Sorry it's not in English, but it's the only thing I found that actually had a download of the rom. Even Pantech doesn't seem to have anything besides the manual and drivers for it.
Click to expand...
Click to collapse
So I'm not bricked or anything right? If I was it wouldn't boot at all right?
Cedar1111 said:
So I'm not bricked or anything right? If I was it wouldn't boot at all right?
Click to expand...
Click to collapse
If the device powers up but is not able to boot into the operating system, that is referred to as a soft brick.
es0tericcha0s said:
If the device powers up but is not able to boot into the operating system, that is referred to as a soft brick.
Click to expand...
Click to collapse
Thanks ,, Any ideas on how I can fix this issue, or install a new rom ?
es0tericcha0s said:
Don't think that there are any custom updates. I found this: - Sorry it's not in English, but it's the only thing I found that actually had a download of the rom. Even Pantech doesn't seem to have anything besides the manual and drivers for it.
Click to expand...
Click to collapse
your right, it's not English, therefore I'm outta luck on that. haha although I still watched and tried to see if just maybe I'd catch some insight from it.. but thank you for sharing it with me..
Hi xda Members,
I got a Vivo Y53 here which is belong to my friend and its already bricked. It just bootlooping at bootlogo but I still can enter fasboot & recovery mode by manual pressing buttons.
The bootloader system is lock and Usb debug is also not turned ON.
Downloaded & trying to flash its stock ROMs using QFIL but it always failed because it can't find "system_1.img" in directory, it only have "system.img". Just a single system img.
I Open that raw XML using Notepadd++ to check and found the problem but I dont know how to modify it or maybe I don't have to...
Here I attach the XML file at bottom of this thread.
I would like to ask if anyone can help me to fix this XML for only flashing system.img and not system_1.img until system_30.img. Same for data/cache imges.
Appreciate any help!
Many thanks!
*Sorry for my broken english..
Choose factory reset from the recovery menu.
HippoInWindow said:
Choose factory reset from the recovery menu.
Click to expand...
Click to collapse
Hi,
It doesn't work.
Formatting process done successfully. But when I reboot. I just entering system repair menu.
RidzVarn said:
Hi,
It doesn't work.
Formatting process done successfully. But when I reboot. I just entering system repair menu.
Click to expand...
Click to collapse
Can you send a screenshot?
Hi guys..
Sorry for late updates.
Gladfull I manage to get this problem solved finally.
Attempted to edit that XML file by deleting unnecessary rows, change system_<numbers>.img to only system.img and and same for data.img and cache.img.
Change the start sectors for those imgs to be flashed by refer to its last imgs ending sectors. I know maybe the method I used is sound like crazy. Hahaha.. but it works man!
After all process done. Unplug USB and press power button. I dont know why. But it takes almost 1minute to powering up. It entered system repair menu again and I choose to Power Off. And reboot into recovery > wipe data and caches. And reboot....
VIOLAA! It works! PRAISE to God
Thanks to members who tried to help. I appreciate your kind efforts. If anyone need more infos or have any questions regarding my revive methods. Please ask. I'm more than happy to help.
Best regards.
can you send the file you have edited
RidzVarn said:
Hi guys..
Sorry for late updates.
Gladfull I manage to get this problem solved finally.
Attempted to edit that XML file by deleting unnecessary rows, change system_<numbers>.img to only system.img and and same for data.img and cache.img.
Change the start sectors for those imgs to be flashed by refer to its last imgs ending sectors. I know maybe the method I used is sound like crazy. Hahaha.. but it works man!
After all process done. Unplug USB and press power button. I dont know why. But it takes almost 1minute to powering up. It entered system repair menu again and I choose to Power Off. And reboot into recovery > wipe data and caches. And reboot....
VIOLAA! It works! PRAISE to God
Thanks to members who tried to help. I appreciate your kind efforts. If anyone need more infos or have any questions regarding my revive methods. Please ask. I'm more than happy to help.
Best regards.
Click to expand...
Click to collapse
can you send the file you have edited ?
miyank said:
can you send the file you have edited ?
Click to expand...
Click to collapse
OMG.. I missed this thread. I will try to find that edited XML file in my PC. Hope its still there
will post it as soon as possible.. my apologize
VIVO Y53 Factory Firmware [SD] - PD1628F_EX_A_3.0.18 Only TH[androidhost.ru].zip
http://androidhost.ru/7j9
Dated Uploaded: 05/10/2018 Filesize: 1.81 GB
VIVO Y53 Factory Firmware [9008] - PD1628F_EX_A_3.0.18_vivo_qcom_LA.UM.5.3-02910-89xx.0_msm8937_split Only TH[androidhost.ru].tar.gz
http://androidhost.ru/7j8
Dated Uploaded: 05/10/2018 Filesize: 1.98 GB
VIVO Y53 Factory Firmware [9008] - PD1628F_EX_A_3.0.18_vivo_qcom_LA.UM.5.3-02910-89xx.0_msm8937 Only TH[androidhost.ru].tar.gz
http://androidhost.ru/7j7
Dated Uploaded: 05/10/2018 Filesize: 1.98 GB
help me i don't quite get what you guys are talking about,
i can't enter recovery mode since it shuts down on its own
i can enter fastboot mode once i let go of the volume- key it resets again
edit: suddenly i was able to enter some mode and was able to reboot it, i dont even lost any files in the process, i think it was because i charged it, can anybody confirm this?
edit 2: it entered bootloop again, is there a way to stop this?
Aantuerpia said:
help me i don't quite get what you guys are talking about,
i can't enter recovery mode since it shuts down on its own
i can enter fastboot mode once i let go of the volume- key it resets again
edit: suddenly i was able to enter some mode and was able to reboot it, i dont even lost any files in the process, i think it was because i charged it, can anybody confirm this?
edit 2: it entered bootloop again, is there a way to stop this?
Click to expand...
Click to collapse
Hi,
Can it boot into System Repair menu by any chance?
RidzVarn said:
Hi guys..
Sorry for late updates.
Gladfull I manage to get this problem solved finally.
Attempted to edit that XML file by deleting unnecessary rows, change system_<numbers>.img to only system.img and and same for data.img and cache.img.
Change the start sectors for those imgs to be flashed by refer to its last imgs ending sectors. I know maybe the method I used is sound like crazy. Hahaha.. but it works man!
After all process done. Unplug USB and press power button. I dont know why. But it takes almost 1minute to powering up. It entered system repair menu again and I choose to Power Off. And reboot into recovery > wipe data and caches. And reboot....
VIOLAA! It works! PRAISE to God
Thanks to members who tried to help. I appreciate your kind efforts. If anyone need more infos or have any questions regarding my revive methods. Please ask. I'm more than happy to help.
Best regards.
Click to expand...
Click to collapse
Sir can i see the xml file? PLEASE:crying:
https://drive.google.com/uc?id=12EgsXRQZLrt3k2fQtwhSeTItHmMVO-QF&export=download
try this. its work for me
RidzVarn said:
Hi guys..
Sorry for late updates.
Gladfull I manage to get this problem solved finally.
Attempted to edit that XML file by deleting unnecessary rows, change system_<numbers>.img to only system.img and and same for data.img and cache.img.
Change the start sectors for those imgs to be flashed by refer to its last imgs ending sectors. I know maybe the method I used is sound like crazy. Hahaha.. but it works man!
After all process done. Unplug USB and press power button. I dont know why. But it takes almost 1minute to powering up. It entered system repair menu again and I choose to Power Off. And reboot into recovery > wipe data and caches. And reboot....
VIOLAA! It works! PRAISE to God
Thanks to members who tried to help. I appreciate your kind efforts. If anyone need more infos or have any questions regarding my revive methods. Please ask. I'm more than happy to help.
Best regards.
Click to expand...
Click to collapse
How did you manage to do that sir? i've been facing that kind of problem now with my vivo y53. i tried to hard reset but still stock on system repair mode everytime i open my unit. can you please tell me how did you fix this problem? thanks a lot
RidzVarn said:
Hi guys..
Sorry for late updates.
Gladfull I manage to get this problem solved finally.
Attempted to edit that XML file by deleting unnecessary rows, change system_<numbers>.img to only system.img and and same for data.img and cache.img.
Change the start sectors for those imgs to be flashed by refer to its last imgs ending sectors. I know maybe the method I used is sound like crazy. Hahaha.. but it works man!
After all process done. Unplug USB and press power button. I dont know why. But it takes almost 1minute to powering up. It entered system repair menu again and I choose to Power Off. And reboot into recovery > wipe data and caches. And reboot....
VIOLAA! It works! PRAISE to God
Thanks to members who tried to help. I appreciate your kind efforts. If anyone need more infos or have any questions regarding my revive methods. Please ask. I'm more than happy to help.
Best regards.
Click to expand...
Click to collapse
Good day sir can you please send me the exact format of the XML file,thank you.
RidzVarn said:
Hi guys..
Sorry for late updates.
Gladfull I manage to get this problem solved finally.
Attempted to edit that XML file by deleting unnecessary rows, change system_<numbers>.img to only system.img and and same for data.img and cache.img.
Change the start sectors for those imgs to be flashed by refer to its last imgs ending sectors. I know maybe the method I used is sound like crazy. Hahaha.. but it works man!
After all process done. Unplug USB and press power button. I dont know why. But it takes almost 1minute to powering up. It entered system repair menu again and I choose to Power Off. And reboot into recovery > wipe data and caches. And reboot....
VIOLAA! It works! PRAISE to God
Thanks to members who tried to help. I appreciate your kind efforts. If anyone need more infos or have any questions regarding my revive methods. Please ask. I'm more than happy to help.
Best regards.
Click to expand...
Click to collapse
GOOD DAY SIR, can you please give me the exact file you edited? thank you
-LYNN- said:
GOOD DAY SIR, can you please give me the exact file you edited? thank you
Click to expand...
Click to collapse
Hi Lynn
My apologize.. I dont have that edited XML file anymore.