hey
yesterday i install 4.1.2 XXLS that look like S3 with odin
everythings is okey but when i wake up i found my phone is off my battery is empty
i charge it for 30min that give me 20%
i pull the charge AC i go to other room to charge my phone but i found that not work cant charge
i try USB connect with pc that not work too its like there is no cable pluggin
i try to turn off mobile pull the battery format my phone all of this not work
Try charging the Battery using external charger. ...
It could be a problem in your charging port... else put back the stock ICS and try charging. .
Sent from my GT-I9100 using xda app-developers app
I had the exact same issues you have after flashing the LSJ Rom.
First I had huge battery drain, then my phone rarely managed to recognize the charger/USB cable
However, I kind of managed to fix it for two days now.
What I did was; pull out the battery for a couple of hours. Afterwards, I tried to charge it a bit and flash my old rom (CM 10.1)
Not sure if this was the reason for the fix, but you could try it.
so i should to turn back to ics
but mode download doesnt work because of the phone dont detecte usb/charger
i wanna do it via recovery
i flash into ics 4.0.3
i upgraude via wifi to 4.0.4 but still the same probleme
i dont understand when i connect my phone to odin via cabel USB that work. but without odin just plug it didnt work
Kies installed?
You should have read about battery drain in JB leak...it's kinda better than ICS.
i fix that by a technician
he told me he fix that by washing with a product that all, he not change connecteur with other one just fix it
now i worry if this probleme came back hhhhh
Related
my problem is that my x10i wont boot at all just vibrate no light nothing, and it wont charge olso but :
i can inter to flash mod and tried ((FlashTool)) its just stop instantly and show this ((Error flashing. Aborted))
any idea
m.tarek.s said:
my problem is that my x10i wont boot at all just vibrate no light nothing, and it wont charge olso but :
i can inter to flash mod and tried ((FlashTool)) its just stop instantly and show this ((Error flashing. Aborted))
any idea
Click to expand...
Click to collapse
Does it charge?, and have u tried SEUS or PC Companion?
Just say: Repair it.
no it dont charge
and SEUS not recognizing my phone
and PC Companion stops at downloading
Well considering it doesnt charge im not suprised flash tool/seus or pc companion doesnt work.if u cud some how charge the battery then u can investigate further
Sent from my X10i using XDA Premium App
i experienced the same issue last week...
now i recovered the phone.
First recharge the battery by wall charger. led will turn green instead of red... beware,,, insert battery after you plug in power cord.
second open the back cover, unscrew the screws, you can find the video from youtube to guide you... in my case, one of the connectors was not sitting well.
try it again... it will flash smoothly normally only takes 4 mins to done the whole processing... make sure you have full charged battery during the update.
i am recharging my battery with battery charger now
and i just finish unscrewing my phone and reconnecting all the connector and cleaning the USB and the battery connector
lets wait and see
fully recharged battery and all well connected connector and nothing
so tomorrow i will go for serves ????
I ended up buying an external Battery charger, works well.
I have the same problem here!
something strange is happened to me, after flashing some roms
no i cant boot my phone without a charger.
tried to re flash again to KPH and XXC1 but same prob.
also tried to use battery calibration, nothing changed.
after i unpluged USB conector the still showing that it connected to my computer.
did it happen to some one ?
thanx
you must have deleted some important system file while trying to do the battery calibration ... try flashing your phone with complete (5 file format) ROM
Or Its time to change the battery ‼
i tried to flash GB then back to froyo .
battery is good, after i start up the phone with charger
there is no problem to disconnect the charger and stay with battery.
also changed battery no change.
i have noticed that after i disconnect usb from the phone
the is shown that usb is still connected.
maybe the phone brooked ?
Is your phone under warranty ??
you might have to replace the USB Port for your phone
Yap thats what im going to do.
Sent from my GT-I9000 using xda premium
I have the same pb with a i9000 and after 2 month was solved by the service replacing the microUSB connector.
(other 2 times in service they told me that the phone's hardware is OK, but it wasn't)
when that happends, even with full charged battery it shows an empty one....
my advice: go with the phone in service, ask them to check the hardware and if they say it's ok then ask them to change the microUSB, could't cost so much
hi,i have battery indicator and it say my battery is overvoltage,i think its happen one night when we have Power Frequency. after that night i make my device root and full wipe also battery wipe
i flashed new rom with odin but i still have this problem.
now i wanna know the solution for this problem Except changing the battery if it is possible,and if i use the overvoltage battery,my GSII get damege???
me too having the same problem.. i dont know what to do...
please anyone please help to slove this problem
Try charging it using your PC via USB cable, i have reasons to believe the wall charger s*cks
Omega Frost said:
Try charging it using your PC via USB cable, i have reasons to believe the wall charger s*cks
Click to expand...
Click to collapse
no use..
it shows usb connected
if we going to turn off/on usb debugging mode it says "usb connected"
cant shut down the phone.. it again turns on / it shows a big battery icon with a warning sign flashing.
yesterday updated my firmware to KI1 from KG2.
still problem continues..
Hi guys, I have very big problem with my xperia. Few weeks ago i installed cyanogen mod (http://forum.xda-developers.com/xperia-u/p-development/-t2626639) evrything was working fine, but suddenly when i connected my charger to phone, it do not recognized it is charging. After some time of charging battery level goes up, but phone is hot as hell. After charging to 100% phone is rebooting and staying on sony logo, its turning on only after disconecting a charger. Battery life is like 15 minutes. I have tried to reflash cyanogen, didnt help. Then i wanted to reflash stock rom but after connecting phone to computer nothing happends, computer dont see phone. I have tried a lot of chargers and cables, nothing is working fine. I was thinking tahat maybe usb port is somehow destroyed, but phone is "charging".If you can please help. Cheers.
@krzywy1121
Change you battery.
soft
I think it is not battery becouse i can not even connect my phone to computer. I think it is some kind of soft problem, but i don know how can i flash stock rom over cyanogen without using flashtool.
krzywy1121 said:
Hi guys, I have very big problem with my xperia. Few weeks ago i installed cyanogen mod (http://forum.xda-developers.com/xperia-u/p-development/-t2626639) evrything was working fine, but suddenly when i connected my charger to phone, it do not recognized it is charging. After some time of charging battery level goes up, but phone is hot as hell. After charging to 100% phone is rebooting and staying on sony logo, its turning on only after disconecting a charger. Battery life is like 15 minutes. I have tried to reflash cyanogen, didnt help. Then i wanted to reflash stock rom but after connecting phone to computer nothing happends, computer dont see phone. I have tried a lot of chargers and cables, nothing is working fine. I was thinking tahat maybe usb port is somehow destroyed, but phone is "charging".If you can please help. Cheers.
Click to expand...
Click to collapse
Im having the same problem here. HAve you managed to solve this?
Thanks
I've changed the battery, and it didn't make nothing. Phone can't recognize the cable plugged in, if i plug charger in, it charges, but don't indicate it. I can't connect my xperia to pc and flash stock rom. Any ideas how to solve my situation ?
hello everyone,i have updated GT-I9205 to 4.4.2 (sprint) stock, the first week was pretty good, at the second week my phone suddenly shut down and wont turn back on the battery was about 35-40%, i tried to connect to wall charger but no sign of life also tried from computer the same again under device menager no device was being added, after a day of trying i was nervous and just keept pressing the power button for about 5 minutes and than it turned on and no problems till yesterday, as usual i have putted the phone to charge when i gone to sleep and when i woke up it was 33% and not charging, when i put the charger it says usb connector connected and wont charge, ive tried to go to download mode and maybe flash with an other stock firmware but wont be recognized, i also tried to wipe data/factory reset but no luck, so i thought it was a hardware failure while trying i've found out that when i am in download mode with usb cable connected and take out the battery the phone stays turned on, than realized that if i connect the usb cable while the phone is of and than go to recovery mode then reboot, when it boots it charges the battery but keeps no notification that its charging just the regular battery icon and if i take out the cable and put it back it says usb connector connected but wont charge , does anyone know what to do with this, is this a hardware issue (i know that if i change the motherboard it will be okay because of firmware) or is this a software issue(what im thinking it is), does anyone how can i change the firmware without odin and without being rooted, or is anyway to root 4.4.2 without odin than install an other firmware or what should i do (instead of killing myself hahahahah).
Sorry for my bad English and if i was not clear please let me know than i will record a video and post it here!
Thanks for your time.
Kind regards from Prishtina DB
its closed
thanks everyone who was here, it was a hardware problem I've fixed the connector on the phone now its working fine, so it has not being a software problem.