Not sure if this is the right section, mods feel free to move.
So last week I dropped my amaze, and the screen busted up pretty good. Still worked, I just had to read things between the cracks. Fast forward to today, the digitizer/lcd that I ordered showed up. I made the switch, made sure everything was connected, put it back together, and I got nothing. Won't power on. If I connect to the charger, I get the charging light, but I can't for the life of me make it power on. Any ideas? I've already double checked the cables, and they all look pushed in far enough. Can't find anything else that isn't connected. I'm surprised it will charge without coming on. Maybe the digitizer/screen I bought are duds? Busted up the old ones pretty good taking it apart, so I can't pop the old one back in.
edit: Okay, I got it to boot by plugging it in, and removing/popping the battery back in. Looks like it's just my power button that's toast. How do I fix the power button?
ok, your button may be not on the whole way or something lol... but you can wake the phone with the camera button right?
ziggy46 said:
ok, your button may be not on the whole way or something lol... but you can wake the phone with the camera button right?
Click to expand...
Click to collapse
Kinda? I installed a lock screen app that lets hardware buttons wake up the phone. So using that, yes, the camera button wakes up the phone. I really don't want to pull it apart again, those ribbons are a PIA to get back into place. I've kinda looked around on the net but haven't found any conclusive answers. Meh.
Related
i just recieved my evo 3d today threw ups. and i noticed my power button is hard to press to turn the screen off... anyone else ran into this problem?
The button is built into the battery cover so remove it and place it back on.
Sent from my PG86100 using Tapatalk
make sure your battery door is completely on and snapped in the correct spots.
i have issues where either the power button is way too easy to press or way too hard. hopefully a new case will solve that.
I had a badly dysfunctional power switch with my first 3VO, I have since exchanged it for a new one.
And, no, in my case it was not the battery cover-power switch interface, it was the switch itself. I removed the cover and directly pressed it. Strange thing was, with mine, if I removed and replaced the battery, I could get one or two presses that registered, otherwise nothing -- no wake/sleep, no power off/on.
My wife and I both have Evo 3d's and her power button is way easier to push than mine. I switched the back covers between the phones and the problem followed the cover. I looked at both and the power button on my cover isn't molded correctly where it pushes on the phone. It is shorter so it sits further in the phone and doesn't work quite right. I called HTC and Sprint and there isn't a replacement cover available yet so they are going to switch out the phone.
I had a power button issue, where if I pushed the button, it would come up with the shutdown menu and no option just turn off the screen. Was in the process of going take it back for a replacement and found that when I removed the case to switch the memory card that my one was working as it should. The hardness went away and the option to turn off the screen came back. Strangest thing I seen since it truly seemed like a hardware issue.
i am going to check a few out in store and see if mine is like what you describe. To me its set pretty low and the button doesnt stick out very far.
Mine sticks out pretty far... isn't easy, or hard to press. I guess i got lucky.
Mine is really touchy, when I press it to lock the phone it sometimes goes to the shutdown popup. Sorry this post wasn't more helpful to the op, lol, just sharing.
Has anyone noticed the power button being extra sensitive? That is to say, on the Hero/Evo, you had to hold the power button for at least 2 seconds before the pop-up Power Options menu would display. On my 3vo, it pops up in less than a second. I'm finding it slightly annoying, because the space between "sleep" and "power options menu" is too narrow.
Not mine....
dmcduck said:
Has anyone noticed the power button being extra sensitive? That is to say, on the Hero/Evo, you had to hold the power button for at least 2 seconds before the pop-up Power Options menu would display. On my 3vo, it pops up in less than a second. I'm finding it slightly annoying, because the space between "sleep" and "power options menu" is too narrow.
Click to expand...
Click to collapse
work on reseating the back shell of the phone, i had the issue too at first and i thought it was a defect, but i played with it a couple times and got it to work like a normal power button
Nope not at all, I actually have to press it more than once sometimes and harder the second time for it to work......
yea mine is a lil sensitive...cant have it my pocket because of it..pulled it out a couple times and the phone bouncing around in my pocket opened apps and almost called ppl
Throw an OtterBox on there....
you have to give it a little lovin- WON"T happen by accident.
Also - saved my3D from a nice 5 foot drop courtesy of some Crazy 3 yr olds on the 4th.
mine is like that and I hate it!!!
U guys have cases on the phone? I guess not
Sent from my PG86100 using XDA Premium App
I actually find the new power button a little bit better to my liking, a lot easier to find in a blind poweron. But I do agree that it might be a little too sensitive. I've found that the phone turns itself on while in my pocket - which is a bad thing because on shake the led flashlight turns on lol! Of course that kills the battery...
Also when trying to turn on or off... sometimes i see the turn off, reboot menu pop up which just simply put, never happened with the evo og. And while i like the ease of use and how fast it reacts to turning off/on, it seems to be a bit of a problem ATM
not not at all sensitive. it's actually under sensitive. some time i get frustrated because i have to push it so hard in the exact sweet spot just to get it to turn on. after having it for over a week now it's getting better, but at first i couldn't even get the thing turned on.
Not mine in fact mine is kinda hard to push. I'm going to the Sprint store I bought mine from this weekend to see if I can get it switched out because I have light leaking through the ring that surrounds the search key, and it bugs the hell out of me lol. So I hope my new one is gonna be normal.
This happens to me with or without the case. I did have a very brief time where the power button would not respond at all, and discovered that the back was causing it (I had swapped the OEM 8G card for my 32).
I don't think this is a big enough problem for me to try and swap the phone out, although it is a little annoying. I suppose in time I'll learn not to push the power button too long.
I have the same problem with the sensitive power button but I'm on a Samsung Galaxy S. I'm wondering if there is dust in the way... Anybody ever find a fix or diagnose the problem for this? I've seen the same problem across multiple devices on the forums so I am starting to believe its a wear and tear type of thing.
Mine is kinda sensitive. But not as sensitive as the one I saw at my local sprint store. Interesting how it seems like no two EVOS are the same.
Good thing though is that since the button is built into the backcover... Maybe picking up another one can deliver a more sensitive/stiff experience.
Sent from my PG86100 using XDA App
Hey guys. I was using my phone to check email, browse facebook, normal stuff. When all of the sudden it emitted a high-pitch squeal and shut off. That was an hour ago. I've been unable to get it to come back on. If i pull the battery and reinsert, it'll show the Samsung logo before beginning and endless series of vibration pulses. It won't stop unless I pull the battery. I've tried getting into recovery, no luck. I tried putting it into Odin mode, but as soon as the Odin screen loaded, the phone went black and back into the vibration pulsing. I've tried pulling the SIM, memory card, new batteries, anything I can think of. I've got plenty of backups on my SD card, so wiping it isn't an issue if i could just get to a recovery screen.
Any ideas what the hell this is??
Bad battery.
Stuck power button.
Your power button may be stuck. Try flicking it with your finger.
Well, i tried booting it with only the wall power connected, no battery, but nothing. I tried flicking the power button to loosen it, but no joy there either. It feels like the power button is releasing itself like it should, doesn't feel stuck. I could possible spray a tiny bit of switch cleaner in there to loosen things up.
EDIT: What is a stuck power supply supposed to feel like? Mine feels like it's making a full movement. There's a solid click on a full press and a smaller click when releasing it. Feels like it's working. I'm tempted to just crack her open and get a better look. I'm on a replacement Blackberry while my note is down and this dumbphone is KILLING me! Gotta get the note back up and running.
The power button looks like this on the inside.
It's a tiny micro switch. Sometimes the tiny mechanics get stuck on the inside. When it's stuck, it constantly reboots. It's a very common problem and sometimes an easy fix.
Parts of your problem resemble a bad battery like capt mentioned. As well as the stuck power button symptom. You can take the phone apart and try to clean it. It's not hard to do. Spraying in the external button probably won't reach the actual button though. Sorry if our first two ideas aren't fixing your issue. Maybe someone else will come along with another idea.
I'm pretty sure we are correct.
It's the power button mine does that when it sticks high pitched noise then the black screen with vibrations
Sent from my SAMSUNG-SGH-I717 using xda premium
mv1luv said:
It's the power button mine does that when it sticks high pitched noise then the black screen with vibrations
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
This is EXACTLY what I experienced, noise and all. Sounds like I need to take my phone apart and examine that switch. Is it as easy as blowing compressed air (PC cleaner type) through it to clear it?
EDIT: Well, I gotta give it to you guys. You were spot on. I took the phone apart and really did nothing more than tap on the switch directly and it booted right up. I hit it with some canned air just to be safe and clean it all out. It's currently charging back up and looking fantastic at this point! Thank you guys so much. You've saved me from having to go any longer with a Blackberry!!
Glad to hear you're up and running again! This pesky power button issue has plagued many.
Please edit the subject line to say [solved] so others searching may be saved.
SilverStone641 said:
This is EXACTLY what I experienced, noise and all. Sounds like I need to take my phone apart and examine that switch. Is it as easy as blowing compressed air (PC cleaner type) through it to clear it?
EDIT: Well, I gotta give it to you guys. You were spot on. I took the phone apart and really did nothing more than tap on the switch directly and it booted right up. I hit it with some canned air just to be safe and clean it all out. It's currently charging back up and looking fantastic at this point! Thank you guys so much. You've saved me from having to go any longer with a Blackberry!!
Click to expand...
Click to collapse
Thank you for posting your resolution. Many don't and it kind of leaves us hanging as to whether or not suggestions helped.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
captemo said:
Thank you for posting your resolution. Many don't and it kind of leaves us hanging as to whether or not suggestions helped.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Thanks!! In the spirit of helping others plagued by this issue, it's interesting to note that my power button always "clicked" like it was making good contact, but never worked. As soon as I cleaned the switch, it started working, the click stayed the same either way. Moral is, even though the power button feels like it's working, CHECK IT!! :highfive:
hey, everyone...
quick question to see if anyone has come across this particular issue.
i've been running dirty unicorns, toast kernel alex uses for that rom.
woke the phone up yesterday am after spending the night on the charger.
still plugged in, i checked the time.
pushed the power button again to put it back to sleep.
nothing...the screen stayed on, but frozen.
unplugged it from the charger, screen powered down.
haven't been able to get the screen back on.
strangely, the home, menu, back and search buttons do manage to light up, though.
oddly, enough...the phone still works normally.
i can guess as to what my security pattern is, hit the magnifying glass to power up google now and ask it questions.
i can also receive phone calls and swipe to take or hang up the call as usual.
once on the call, i can guess as to where the red bar is for hanging up.
phone works like normal...as long as i can guess as to where everything is.
also, when in lock screen mode i can side swipe to get to the camera and take pictures.
so, essentially, screen doesn't work...but, it still recognises and accepts touch input.
i just can't see a damn thing.
any idea?
took it to a sprint corp store and they changed the housing for me...for free.
changed the screen, top housing, etc.
they said it looks like it might be the board.
any ideas beyond that?
thanks again, everyone!
also, on a weird note...my battery is bulging in the middle.
i guess it's on the way out...with everything else.
I've had this phone for years and am having this issue too. Anyone have an idea?
yeah, it turns out that my screen's fried.
at least that's what the sprint tech told me.
pretty much everything works perfectly.
impeccably...i just can't see it.
i guess that's it for the phone unless i want to replace the screen.
they're rather inexpensive...depending on where you source it from.
Hey,
I'm new to these kinds of things like forums and stuff like that, so sorry if I'm not that clear with what I'm saying. If I could also get some criticism on the post itself and how I can improve, it'd be a great help!
I've had this phone since November of 2013 and this is my first time encountering this problem. After getting home from school, I took my phone out of my backpack and tried waking it(simply pressing the power button so I could see the lock screen), then I noticed nothing would happen. I tried again and again then noticed that the 3 "buttons" at the bottom of my phone were lighting up when I unlocked it, and disappear when locking it. Once I unlocked it, I was able to turn the volume higher and lower, listen to music(because I remember what the layout looks like before it had a black screen), and even (somewhat) use apps. Every time I hear my phone ring, it really makes me want to punch it, because I know that the phone itself is working, but just the screen won't turn on. Like even when I registered for xda-developers, my phone rang once I got the e-mail to verify my account.
I looked at a bunch of other threads before creating this one. Some said to hold down Power Button, Volume +, and Volume - for 30-60 seconds. I tried doing this multiple times, each time holding down the buttons a different amount of seconds, and nothing happened. I let the 3 icons at the bottom blink 15 times, wait a few seconds, let it vibrate, then let go. The longer I held the buttons, the more it would vibrate(about one vibrate for every 15 seconds). I hear the sound effects when turning it on and off("Droid" in the robot voice, then followed by some weird robot-sounding noises). Some people just said to let it charge, and I also tried that. Nothing happened, really, it just charged.
I've been thinking of letting the battery die out, but who wouldn't think of that? So I just ditched that idea. Tell me if I should try it, though, please.
My phone's pretty beat up, but nothing to the point where some parts of the screen would stop working, just two pretty big cracks on it. Sorry, I can't post pictures 'cause I'm new > <
If you guys could help me out with this, or just tell me if it doesn't work at all, it'd be a great help.
Thanks,
Joseph
Sounds like the LCD has been broken.
es0tericcha0s said:
Sounds like the LCD has been broken.
Click to expand...
Click to collapse
That sounds pretty simple. Would I need to replace it, get a new phone, or fix it myself at home?
ijosepham said:
That sounds pretty simple. Would I need to replace it, get a new phone, or fix it myself at home?
Click to expand...
Click to collapse
I would replace the screen. Whether or not you want to do it yourself depends on your confidence, experience, and tools. If you've never torn a phone apart before, then you might want to find a friend who is handy or go to a shop because HTCs, in general, are not the easiest things to start with. And you'll definitely want to buy the already pre-assembled LCD+Digitizer combo as trying to separate the 2 would be more hassle than it is worth.
http://www.repairsuniverse.com/htc-droid-dna-repair-guide.html