hey having a pretty major issue and really hoping someone can help. i have a rooted razr with jellybean leak. installed and rooted with mattlgroff droid razr utility. was working fine for a while. started having some issues so i just did a safestrap system restore and now the phone wont boot. it gets to the moto splash screen and then just goes blank, does not even get to the option to boot to safestrap or regular boot. i have tried to restore jb again with the razr utility and it seemed to install but then safe result on reboot, moto splash then nothing. i would try factory reset, but cant seem to get to that either. i boot to the built in recovery mode and choose recovery and then it gets to the screen with the android lying on its back with the triangle and exclamation mark and i hit the volume button and nothing happens, just stays there. would really appreciate any help or ideas here. thanks.
nevermind. was finally able to get into recovery mode and did factory reset and its working now
Related
I attempted to flash MIUI.us V4 2.6.8 Atrix ByTeamMotoTegra today, and was almost successful, but I found out that I shouldn't have wiped the phone before flashing. I lost the touch functionality, and couldn't select my language. I flashed my old ROM (Neutrino) to try to flash back to MIUI, but still could not seem to get the touch funcationality.
After a few times of taking out the battery and trying to get the MIUI ROM working, I ran into a boot loop. The screen will not go past the screen with the red logo, no matter what I do. If I hold the volume up/down buttons, "starting RSD protocol support" appears, but nothing else happens. The phone just keeps turning off, then returning to the screen with the red logo. Any ideas on how to get past this screen?
i have a similar problem, i rooted and unlocked a friend atrix today on 2.3.6 version 4.5.141
it went fine and booted normally. i then went into cwm and made a mistake by not making a backup, cleared data cache and dalvik then proceeded to flash aokp. it booted but didnt go past the motorola dual core screen while still displaying unlocked. i can still go to fastboot and even into cwm as i have attempted to flash other roms after clearing all things out again but nothing is going past the boot screen.
any suggestions?
I can scroll through the other CWM menu options, but I can't boot up or anything else. Anytime I select one of the options, it will either just restart and go back to the red logo screen, or say I don't have enough battery life to flash. My battery is now completely dead and doesn't seem to be charging at all, even though it's been plugged in all night.
I hope this is posted in the correct location, apologies if it is not.
As stated in the title my droid razr maxx is stuck in a boot loop:
it will go to the "M" "dual core technology" screen and reboot itself after about 20s.
I tried going into the boot menu [I can turn off the phone from the AP fastboot, so it doesn't lose charge].
In the boot menu, I tried to do a factory reset (I've never done anything to this phone and have no idea how)...the recover screen never comes up, the phone just goes back into the loop, same thing for BP tools.
Note: FYI: I had my phone plugged into my computer when I went into AP fastboot and I got an error on my computer saying that it can't find the device.
As of right now I have no idea what to do (I've only ever used phones as they came in the box)
Any help would be greatly appreciated
Thanks
Update: After charging for the night, the phone turned on with no problem...
then later the screen wouldn't turn on [side buttons and touch didn't work].
Now it looks like the phone is completely off and wont turn on at all (I tried all the combination of buttons and I tried plugging it in)
Please help
Hi, I have unfortunately bricked my Razr after trying the "Restore Droid Razr to 6.12.173" on DroidRazrUtility 1.8. I was running CM10 on my Razr (Verizon US) previously and wanted to go back to stock/unrooted. I first tried to unroot the device, thinking it would do what I needed (using the utility), but this did not work; it just got rid of superuser without getting rid of CM10 (it was a duh moment after I did that...). Afterwards I tried the restore option on the utility which ran its course, rebooted, but got stuck on the Motorola Dual Core emblem and then turned off. I tried to go into AP Fastboot, but when I press the buttons for that, the screen flashes white, then goes to the Dual Core screen again. I got it into fastboot somehow once and retried the restore method, so I know it is possible to get into fastboot, but every time I try now it won't work. Can someone please help me?
EDIT: I can get into the AP Fastboot Flash Mode now, but it will just bring me straight to that, and not to the regular recovery screen. Any ideas?
Thanks in advance for your help! So today I successfully rooted my Droid Razr M. I attempted to install the custom ROM Slim Bean. Unfortunately, it doesn't seem that installation completed properly and when the phone tried to reset after the installation, the fastboot screen came on and it said "boot failure." I was able (by pressing the power, volume + and volume - buttons) to get to a screen where I got a few options, one of them being
"Recovery." I clicked on this, and the screen went to an android robot lying on its back with a red triangle above it and an explanation mark (I believe this might be Android attempting to enter recovery mode). However, the phone gets stuck in this screen and I get no where.
I'm afraid I might have bricked my Razr M. Any help on where to start would be much appreciated.
So I have a droid razr that has (Safestrap 3.73 with TWRP 2.7.0.0)
I flashed a custom rom onto it; a 4.4.4 version and it was working fine for a few days. The phone died overnight, and I charged it to full battery yesterday. After doing so it will no longer boot to the operating system.
The phone can boot to recovery, and the options can be fiddled with there, however I cannot get the phone to get past the blue logo with the spinning arrows. It will stay there indefinitely...
I do not have an external SD card for the phone, and my pc will not recognize the phone in spite of having the drivers for the phone installed before hand. I have tried to wipe/factory reset multiple times and yet it will always get stuck at the blue logo. The option for the stock rom is greyed out in the boot section, and I really need my phone to get some functionality back to it.
I do not have any other image for recovery installed on the phone, only the current rom and gapps are on the install section. I have wiped and tried to reflash but I always get the same result.
Where do I proceed from here? I am very confused and could use some help as to what to do to restore functionality... personally id prefer to go back to stock image but am having a hard time locating the us verizon factory image online, not that I can even get it onto the phone.