Hy i tried to instal original firmware to my samsung galaxy s3 using odin mobile when i staarted it´starting show galaxy sIII text then odin mobile and some text then again galaxy sIII text and odin mobile then some text and again. I tried Power + Volume up and home but nothing hapens when i remove battery then it started again please help. if you dont understand i can made video.
Just flash some stock ROM with Odin for PC and if you want to use Mobile Odin again, follow all the instructions.
Wrong forum .
Yes try and explain have you flashed stock firmware via Odin ..
Are you saying its a bootloop ??
jje
isn't it obvious that questions go in the Q&A forum?
Thanks i flash it using odin pc. thanks
Related
I have Korean Galaxy S2 (SHW-M250K). Last night i recieved an update message KI06 on kies. I started update.
But after downloading update in PC the update process stuck at 3% while flashing the phone. After an hour i removed cable and tried to do emergency update but it was still stuck at 3%.
I tried to flash KG5 with odin but it was also stuck at FSimage.I tried to download again.
Now my phone can go in download mode but PC cannot recogenize usb. and USB not recogenized message appear.
Please HElP what to do?
Is my phone bricked or there is some way to flash it.
Now my phone can go in download mode
Click to expand...
Click to collapse
Then you aren't bricked.
You'll need to reflash using Odin to what ever firmware you were using.
As long as you can access download mode you aren't bricked. It may be a little difficult to use odin if you never have.. But rest assured, you are not bricked.
I have ODIN mode on my phone but when i connect the USB cable to pc, my PC does not recogenize usb. and yellow pop up message of "USB not recogenized" appears. so i cannot flash it it with ODIN or Kies.
I have to solve this USB problem to proceed. Do you have any suggestion for this.
muhammad.ali123 said:
I have ODIN mode on my phone but when i connect the USB cable to pc, my PC does not recogenize usb. and yellow pop up message of "USB not recogenized" appears. so i cannot flash it it with ODIN or Kies.
I have to solve this USB problem to proceed. Do you have any suggestion for this.
Click to expand...
Click to collapse
Search USB problems .like
USB
http://forum.xda-developers.com/showpost.php?p=16070414&postcount=6
jje
Ok
I am on my way to figure out driver problem.
But there is one more thing.
My orignal firmware was korean. But now after unsiccessfull Odin flash my Download mode Screen and "Firmware update failed" screen has changed to english version. Is there a possibility that Odin curropted my Phone modem .
Also one more thing.
I cannot charge my phone because whenever i connect usb or AC charger the computer and mobile icon with yellow mark appears.
modem has nothing to do with the language settings.
update may have changed the firmware, just go into settings, language and change it back.
Cosmic Blue said:
modem has nothing to do with the language settings.
update may have changed the firmware, just go into settings, language and change it back.
Click to expand...
Click to collapse
Yes it can be changed but right now my phone cannot go past " Firmware upgrade encountered an error. Please select recovery mode in kies and try again" screen.
Also i cannot flash because windows is not detecting my Phone's modem correctly.
Windows does not need to see your modem to flash .
My orignal firmware was korean. But now after unsiccessfull Odin flash my Download mode Screen and "Firmware update failed" screen has changed to english version
Fairly simple answer you have flashed a non korean firmware .
What is this Odin mode on the phone is it Download mode ???
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
I wonder if you have the right instructions to follow ??Or are you flashing a wrong firmware .
Personally i would take to a service centre and tell them Kies broke it .
jje
Ammm, you are flashing an incompatible rom on your phone
You should refer to the [SHW-M250*] Korean Galaxy SII M250S / M250K / M250L Users thread for advice on your phone, the firmwares posted in the link above would not work.
Be careful man
JJEgan said:
Windows does not need to see your modem to flash .
My orignal firmware was korean. But now after unsiccessfull Odin flash my Download mode Screen and "Firmware update failed" screen has changed to english version
Fairly simple answer you have flashed a non korean firmware .
What is this Odin mode on the phone is it Download mode ???
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
I wonder if you have the right instructions to follow ??Or are you flashing a wrong firmware .
Personally i would take to a service centre and tell them Kies broke it .
jje
Click to expand...
Click to collapse
I am not in korea, but i bought this korean version version because it was readily available. so i cannot claim warranty.
achillies400 said:
Ammm, you are flashing an incompatible rom on your phone
You should refer to the [SHW-M250*] Korean Galaxy SII M250S / M250K / M250L Users thread for advice on your phone, the firmwares posted in the link above would not work.
Be careful man
Click to expand...
Click to collapse
I have read all of this forum. and i have korean firmware also. but many people have converted their korean firmware to english one.
But right now i have only one problem
my phone is not being detected by ODIN or Kies because of USB not recogenized problem. I need to solve this for further instructions.
Any one has some different idea????
i have korean firmware also. but many people have converted their korean firmware to english one.
Thats what you want then these many people who have converted will have the instructions or method to convert .
jje
Hi everyone.
i own a international samsung s3 gt-i9300T
i noticed it behaving strangly as apps where locking up and then it would restart in the middle of web surfing etc
last night i restarted it and now it has frozen in ODIN MODE and states DOWNLOADING-DO NOT TURN OFF TARGET...
Its been on this page for hrs..
i have a custom Hyperlight rom installed.
Any suggestions would be greatly appreciated.
thankyou.
john
Press and hold the power button to restart it. Does it still reboot into the Download mode?
If yes, then try and install a stock ROM.
Sent from my GT-I9300 using xda app-developers app
it's already in download. read the instructions on installing a stock rom
Oomahey said:
Press and hold the power button to restart it. Does it still reboot into the Download mode?
If yes, then try and install a stock ROM.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
hi
srry fr the late reply but it freezes on the samsung galaxy s 3 gt i9300t screenafter it reboots
im totally lost im about to dump the phone in the garbage and get another one tomorro
ive also tried using odin again but it just stalls for hrs when trying to reinstal flash another rom
thnx heaps for ur advise
Glebun said:
it's already in download. read the instructions on installing a stock rom
Click to expand...
Click to collapse
thnks buddy but when i hold the power button it does what i explained in the above reply when i hold power vol down and home the warning screen comes up informing me that a custom rom can cause critical problems etc so when i press down to cancel it goes back to the previously mentioned screen but when i press up to install rom it goes into odin mode with the android robot with
product name blank (previosly it stated gt i9300t)
custom binary download no (previously stated4)
current binary samsung official (said something different before)
system settings custom
i swear this is doing my head in :0
Basics as its very difficult to understand your posts .
Download mode first screen vol up .
Open Odin
Load firmware file as PDA
Connect USB cable
First box in Odin should show yellow then hit start .
Note at what point fails .
JJEgan said:
Basics as its very difficult to understand your posts .
Download mode first screen vol up .
Open Odin
Load firmware file as PDA
Connect USB cable
First box in Odin should show yellow then hit start .
Note at what point fails .
Click to expand...
Click to collapse
hi im using the latest odin file odin3 v1.85 and is this the right firmware file to use as i used this to root my s3 CF Root-SGS3-v6.4.tar
when i do it it says
<ID:0/005> "cant open the serial (com) port.
<OSM> All threads completed (succeeded 0/ failed 1)
if the product name is empty in download, then it's time to get a new phone. it's SDS
Glebun said:
if the product name is empty in download, then it's time to get a new phone. it's SDS
Click to expand...
Click to collapse
thanks matey
so in other words my phone is bricked :0
by the way what does sds stand for ???
anyway thnx again
Glebun said:
if the product name is empty in download, then it's time to get a new phone. it's SDS
Click to expand...
Click to collapse
hi again
i tried it again and now it says there is no pit partition ???
who wants a samsung s3 brick b4 it goes into the trash ???
antway thnx buddy this rooting is not fr me :0
Put it on ebay just say what the problem is .
Someone who reads your post will come to the conclusion its just a user who has not followed the instructions annd may think its worth a cheap buy .
Odin is not firmware CF Root is not firmware .
jje
Make sure that uve downloaded the correct CF-Root file (for i9300T and NOT i9300)... I think its nothing to do with SDS... Anyway try the following link and download the package again...
http://www.androidegis.com/how-to/how-to-root-galaxy-s3-i9300t-with-cf-root-tool/
Hope it works....
Sent from my GT-I9300 (Hassan Khalid Malik) using xda premium
Hi Friends
Recently i try to load jellybread rom for my samsung galaxy ace s5830i. previously i suing jellyblast rom, i followed the procedure what mentioned in the forum. now my phone stops in the logo itself. i try back again jelly blast still same. also tried odin but my usb not detected in system. kindly give me sollution. i am now phoneless.
vinoth
vinodlion20 said:
Hi Friends
Recently i try to load jellybread rom for my samsung galaxy ace s5830i. previously i suing jellyblast rom, i followed the procedure what mentioned in the forum. now my phone stops in the logo itself. i try back again jelly blast still same. also tried odin but my usb not detected in system. kindly give me sollution. i am now phoneless.
vinoth
Click to expand...
Click to collapse
Questions and problems go to Q&A section!
Sent from my Ace-i using Tapatalk 2
Hit ThanX if I helped, it won't hurt, maybe...
Hello,
You must download stock ROM (multifiles), and .pit file.
You must select the .pit file, the stock ROM files, and flash it. (Everything via Odin)
Are you sure you have the latest samsung drivers for your phone? if not download it from the internet.
And then follow the below steps:
Go to download mode(vol up & down + power buttons)
wait for sometime ,you will come to a warning screen on your phone,press the vol up button,wait again
now check on odin on your computer,odin should have communication with your phone.
And you should have necessary files to unbrick ,if not do the following:
Download the latest firmware>use splitfus to obtain the PDA,CSC and MODEM/PHONE files
you will also need bootloader file and .pit file
Use odin to unbrick.
Easy when done right
Hello,
My friend has given me his S3 to try and fix. The phone will turn on, however it doesn't boot into the Home Screen. All this happened after he received a message about the phone being corrupted. I have tried a few things to fix it:
Attempted to recover the phone using Samsung Kies (in Kies > Tools > Firmware Upgrade and Initialization) - however it does not "connect" to the phone.
The PC does see the phone - Odin recognizes it.
Tried to use Odin to flash a Stock Rom / Firmware - Odin tells me I'm missing a PIT file.
Can't access the phones recovery - only the download mode when turned on.
So I'm pretty much stuck with only using Odin or something similar to try and flash the phone. My issue with Odin is that it doesn't flash zip files, so I'm trying to workout a way to get this phone back up and running but I'm out of ideas.
Ask a moderator to move your thread to i9305 q&a section.
boomboomer said:
Ask a moderator to move your thread to i9305 q&a section.
Click to expand...
Click to collapse
Is this not it?
hey guys,
i tried to root my ss6 edge smg925f on 5.1.1 but i think it gor bricked. now it says use emergency recovery function in the smart switch in pc. smart switch is not detecting my phone. so i tried odin 3.10.6 to install its stock firmware after i press start in odin. odin does not respond. its just doing the process and running but there is nothing in odin showing that the process is going.
please help
roxx302 said:
hey guys,
i tried to root my ss6 edge smg925f on 5.1.1 but i think it gor bricked. now it says use emergency recovery function in the smart switch in pc. smart switch is not detecting my phone. so i tried odin 3.10.6 to install its stock firmware after i press start in odin. odin does not respond. its just doing the process and running but there is nothing in odin showing that the process is going.
please help
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. I have moved your thread to your device's Q&A forum. You'll receive expert advice here. Good luck!