Hello, I'm A Young Teen And I Wanted To Get Jelly Bean Stock On My Phone.. I Flashed CM10 Boot.img and got An Xperia play Recovery (BY ACCIDENT) and Flashed It, My Phone Would Work In Fast Boot, I then Had To Go Out. I Came Back And My Phone Didn't Work. When I Plug into USB The LED Tuns Red. If I Charge It Goes Off After An Hour-ish. It Doesn't Recorgnise/Go Into Flash/Fastboot Modes. Any Fix, Is My Phone Dead/Bricked? Please Can You Help Me, This Phones My New/Best One So Far.
Hello I've Bought It From Amazon Sim Free, I've Unlocked The Bootloader And I Flashed Through Fastboot CW10 Release 202 And Lately I've Read The Latest Stable Release Was 154, I Didn't Transfer The OS's Files To My Phone. Could That Be The Reason? I Don't Get A Green LED So I'm Guessing It Can't Flash After What Has Happened, I Was OK Getting Into FASTBOOT.exe But after Transfering The XPERIA PLAY RECOVERY And Boot.img Without The Files Present On My Device I Couldn't, When I Charge The LED Goes Off After 10-50 Minutes. The PC/Flashtool Don't Recognized The Device Only Under Device Manager - Universal Serial Bus Controllers Sony Erricson seehcri Control Device I've Reinstalled Flashtool Drivers ETC.. Thanks
PS- This Is From My SonySupport Post (MAY NOT MAKE SENSE).
Related
Hello, I'm A Young Teen And I Wanted To Get Jelly Bean Stock On My Phone.. I Flashed CM10 Boot.img and got An Xperia play Recovery (BY ACCIDENT) and Flashed It, My Phone Would Work In Fast Boot, I then Had To Go Out. I Came Back And My Phone Didn't Work. When I Plug into USB The LED Tuns Red. If I Charge It Goes Off After An Hour-ish. It Doesn't Recorgnise/Go Into Flash/Fastboot Modes. Any Fix, Is My Phone Dead/Bricked? Please Can You Help Me, This Phones My New/Best One So Far.
Hello I've Bought It From Amazon Sim Free, I've Unlocked The Bootloader And I Flashed Through Fastboot CW10 Release 202 And Lately I've Read The Latest Stable Release Was 154, I Didn't Transfer The OS's Files To My Phone. Could That Be The Reason? I Don't Get A Green LED So I'm Guessing It Can't Flash After What Has Happened, I Was OK Getting Into FASTBOOT.exe But after Transfering The XPERIA PLAY RECOVERY And Boot.img Without The Files Present On My Device I Couldn't, When I Charge The LED Goes Off After 10-50 Minutes. The PC/Flashtool Don't Recognized The Device Only Under Device Manager - Universal Serial Bus Controllers Sony Erricson seehcri Control Device I've Reinstalled Flashtool Drivers ETC.. Thanks
ePiCaL-XDA said:
Hello, I'm A Young Teen And I Wanted To Get Jelly Bean Stock On My Phone.. I Flashed CM10 Boot.img and got An Xperia play Recovery (BY ACCIDENT) and Flashed It, My Phone Would Work In Fast Boot, I then Had To Go Out. I Came Back And My Phone Didn't Work. When I Plug into USB The LED Tuns Red. If I Charge It Goes Off After An Hour-ish. It Doesn't Recorgnise/Go Into Flash/Fastboot Modes. Any Fix, Is My Phone Dead/Bricked? Please Can You Help Me, This Phones My New/Best One So Far.
Hello I've Bought It From Amazon Sim Free, I've Unlocked The Bootloader And I Flashed Through Fastboot CW10 Release 202 And Lately I've Read The Latest Stable Release Was 154, I Didn't Transfer The OS's Files To My Phone. Could That Be The Reason? I Don't Get A Green LED So I'm Guessing It Can't Flash After What Has Happened, I Was OK Getting Into FASTBOOT.exe But after Transfering The XPERIA PLAY RECOVERY And Boot.img Without The Files Present On My Device I Couldn't, When I Charge The LED Goes Off After 10-50 Minutes. The PC/Flashtool Don't Recognized The Device Only Under Device Manager - Universal Serial Bus Controllers Sony Erricson seehcri Control Device I've Reinstalled Flashtool Drivers ETC.. Thanks
Click to expand...
Click to collapse
try fastboot with your XU kernel and then check if its working or not....... else..
if its getting into flash mode then get stock from the U dev section and then flash using flashtool......
pizda telefonu
@[email protected] said:
try fastboot with your XU kernel and then check if its working or not....... else..
if its getting into flash mode then get stock from the U dev section and then flash using flashtool......
Click to expand...
Click to collapse
I will thank you but can you give me instructions, I don't seem to get into the fastboot as well as no blue led starts? My phone isn't coming on and It only charges in my PC and isn't recorgnized
Hi, so..here's the problem. I've tried to flash my tablet with a 307 firmware, mine was 253.
now i downloaded Flashtool, Downloaded the firmware. done everything the way it meant to be.
and then in the middle of the execution it said something about failure and stopped.
now my tablet won't boot.
When ever i try to boot it, it just shows the Sony logo and dies.
and when i hold the volume down and connect USB the green led light is there just for a split second.
but the volume up and connecting USB shows the blue with no issues.
any chance anyone can help me ?
Edit : I Understand now that those things are normal. the problem is that no software would recognize that the device is in flash mode or fast boot mode.
With that I do need help.-
Edit : What? that's it? I can throw it out of the window or what?
Nothing?
Anyone?
It's been few days..
have you unlocked the bootloader to do your root or did you just go straight ahead to root your XTZ? either way is fine as the root tool kit by doomlord works both ways.
make sure your tablet is charged. did you use the flash tool by bin4ry and androxyde? you can also download sony software emma (if you've unlocked your bootloader)which will restore your tablet to manafacturer default. or just use sony pc companion software if you havent unlocked the bootloader this will work too.
the fact that the sony logo still appears on your tab at least shows its not bricked, ive had my fair share of thinking i'd bricked my tablet but if you've done your research you'll find you can get it back to working order.
Hi
I am on a Neo, running Super Jelly Bean 7. Today I do something stupid then I want to change the kernel but I now UNABLE TO CONNECT THE PHONE IN FASTBOOT or FLASHMODE
I did try followings"
1) Phone off, press & hold Menu while connecting cable. Led flash blue once, then led off and Sony (text logo) appear
2) Phone off, press & hold Back while connecting cable. Led flash green once, then led off and Sony (text logo) appear
3) Phone off, then power on the phone. Few first seconds when booting, led is purple, then led off and the phone boot normally. When I connect it to my PC, flashtool recognizes it properly (says its a Neo phone). I tried to use flashtool to reboot the phone into fastboot via ABD. The phone reboot but not enter fastboot (screen shows like 1st case)
I also try to switch off phone for few mins, clear system/cache/data... restore the phone from my backup, or even make clean install new custom ROM (from zip file)... but all not work!
In my PC, I reinstall adb/fastboot/flashmode drivers... but seem nothing work
My system:
Xperia Neo - Unlock BL (via Sony site) - Rooted - Super Jelly Bean 7.0 - Shardul Seth PAC 4.1/CM4.1 Kernel from this thread http://forum.xda-developers.com/showthread.php?t=2043906
PC: Windows XP with full drivers for Xperia 2011 installed
Pls help me to identify the problem so that I can flash my phone a again
PS: I did flash ROMs (stock and custom, GB, ICS and JB) many times. And of course, I entered fastboot/flashmode many times.
This is hardware issue... same problem with me tried everything setool2, 4se nothing worked. .. Now your device can be flashed with testpoint if you manufacturing date is below 12w10... Only stock firmware
Sent from my MT11i using xda app-developers app
Hi Kana
Just to inform you that I have solved the issue but not really sure what is the root cause: Following is steps I make
- New (another) PC
- Another USB cable - Important to make sure good connection between PC and the phone
- Install updated driver from Sony site
- When connecting device to PC, DO NOT use automatic driver install. I manually chose the updated drivers
After that I now can reboot the phone into flashmode/fastboot again
Hope you will overcome your case
Hi there,
yesterday I tried to root my new Tablet Z (16GB, LTE, Model: SGP321, Firmware: 10.4.B.0.569) and it doesn't start since then.
I used an ubuntu live CD for all these tasks because fastboot doesn't work on my win 8.1 and my debian wheezy didn't have the libc-dev needed in its repositories (didn't want to mess with packets that weren't yet integrated into my OS).
What I did:
unlock the bootloader according to http://unlockbootloader.sonymobile.com/instructions
I followed the instructions here: http://forum.xda-developers.com/xperia-z/general/how-to-root-10-4-b-0-569-t2590781
a few annotations to this:
the firmware rar didn't include a "Recover.zip", so I used the boot.img directly inside the firmware rar
although sony and this CM tutorial use the "-i" parameter of fastboot, I didn't use it because it wasn't used by the tutorial
after I did the "fastboot reboot" step, the device wasn't listed anymore when typing "fastboot devices", which, I think, is okay since the device should restart then.
I think it didn't really restart, because the LED on the side glew red.
I tried to turn on the tablet but it didn't do anything (the LED kept glowing red).
I tried holding vol up and power for a few seconds (until the LED blinked first once and then three times) but the tablet wouldn't do anything except for the LED glowing red. at somepoint, the LED would turn off (I think that happened when I hold vol up and power for more than 10 sec).
I was able to let it glow red again by pressing vol up and power again and release the vol up button before the power button.
I also tried to use the PC companion on my windows machine to repair the tablet but the tablet wasn't even recognized (either using the fastboot-procedure by holding vol up while connecting the tablet nor normal plugging in...)
any ideas what I could do next?
Same Problem!
Hey wullxz!
I have the same problem. Red LED most of the time, and I cannot make ANY USB connection to the PC. The tablet won't show up in the device manager. So obviously cant use flashtool, nor PC companion. Ive tried all this volume up and down button stuff, but simply cannot get it to show up on the computer.. Tried a different USB cable as well.. Same issue. The USB port is definitely not broken. Its brand new..
Have you found any solution ? Or anyone else? Mine just got back from Sony Repair.. they wont fix it cuz they detected that Ive tampered with the original software.... meaning Warranty Lost!
Great!
hi,
i also sent mine to sony for a repair. i wrote that i did a firmware update and the tablet wouldn't boot afterwards.
i didn't try the bootloader-unlock again afterwards.
Help Needed!
Tablet Z with unlocked bootloader and rooted 10.1.C.0.370
My issues occured after a downgrade to 4.1.2.
I CAN:
1) Start my tablet, everything normal...
2) Charge my tablet
3) Go into safe mode
4) Go into fastboot mode (solid BLUE LED)
5) Use the memory card and use root apps (maybe this could help restore?)
I CAN NOT:
1) Get my PC to recognize that a USB device is connected. Neither in Mass Storage mode, Media mode, nor fastboot mode.
- Tried with several cables and computers (this is not a driver issue, since it won't show up at all in device manager)
- Flashtool obvious;y says, no device connected
2) Get in to flashmode: device blinks red for about half a second, then green for half a second, and then LED is off. Nothing recognized via USB on PC
3) Get into recovery mode
4) Update over WIFI (fails because unlocled bootloader I suppose)
Any help would be greatly appreciated!
i think you should open a new thread for your problem because it seems like it's not really similar to my issue.
you should get more/better replies in an own thread.
Oki
wullxz said:
i think you should open a new thread for your problem because it seems like it's not really similar to my issue.
you should get more/better replies in an own thread.
Click to expand...
Click to collapse
Oki thnx, will try that!
centinel_x said:
Tablet Z with unlocked bootloader and rooted 10.1.C.0.370
My issues occured after a downgrade to 4.1.2.
I CAN:
1) Start my tablet, everything normal...
2) Charge my tablet
3) Go into safe mode
4) Go into fastboot mode (solid BLUE LED)
5) Use the memory card and use root apps (maybe this could help restore?)
I CAN NOT:
1) Get my PC to recognize that a USB device is connected. Neither in Mass Storage mode, Media mode, nor fastboot mode.
- Tried with several cables and computers (this is not a driver issue, since it won't show up at all in device manager)
- Flashtool obvious;y says, no device connected
2) Get in to flashmode: device blinks red for about half a second, then green for half a second, and then LED is off. Nothing recognized via USB on PC
3) Get into recovery mode
4) Update over WIFI (fails because unlocled bootloader I suppose)
Any help would be greatly appreciated!
Click to expand...
Click to collapse
let it charge to 100%, check for flashmode drivers installed and then try attaching it to pc only when flashtool asks you to do it.
Rootk1t said:
let it charge to 100%, check for flashmode drivers installed and then try attaching it to pc only when flashtool asks you to do it.
Click to expand...
Click to collapse
Hey thanks for your reply... It wont go into flashmode... Theres something fundamentally wrong.. I cant figure out what... I leave it plugged in for 48 hours..but it doesnt really get full.. the most Ill get the orange LED.. like 50%... now its on since about 12 hours.. no LED on at all... strange..
But yea.. no flashmode... Nothing showing up when connecting the USB cable... nothing in device manager..and therefore flashtool sees nothing!
SOLVED
Problem solved! I can't believe it. Two bad(?) USB cables. Bought a new one, charges fine, flashmode fine. Flashed stock ROM.
However the Camera still doesn't work. Maybe the problem of the cable inside which may have come loose!
Hello friends, i have a problem with an old Sony LT18i from a cousin, he brought it to me because he has the China Mobile variant with no GApps and android version was 2.3.4, i thought it might be solved with a simple flash via FLashtool, but when i've completed the downloading of the ftf file and went to flashtool to flash it, when the flashtool ask me to put it in flashmode pressing the back button and connecting to usb the phone led only blinks of 0.5 sec and then boots into normal mode.
Tried the same with fastboot and then i got the same blink for 0.5s with no detection at all. That surprised me as well i've have flashed succesfully other Xperia devices with no problems of led blinks at all. Now my problem is that later i tried to root the phone and installing CWM to flash another ROM or GApps package, and when i finished to install the recovery now the phone is bootlooping and never gets to boot normally.
I've tried with 4SE dongle to flash it via Testpoint and it doesn't work as the phone manufacture model is 12W13 (new security) which the dongle doesn't support, tried with S1 Tool with version 28II215 and 080714 and i only get PHONE NOT SUPPORTED IN THIS MODE when i try to flash and when trying to unlock the bootloader it gives me NOT SUPPORTED MCU REVISION.
The phone was working well until the CWM installation except for the flashmode and fastboot mode, now i really need to flash it and i can't find a way to do it, i also have RIFF JTAG and Z3X Easy JTAG box but no JTAG available for this model except for Medusa Box which only supports phones with manufacture date less than 12W10, i was wondering if there´s a way to access via QHUSB_DLOAD mode doing the testpoint to manually flash partitions to device or something like that. If you might have a workaround or a solution to at least let the phone in the way it was it will help me a lot. Thanks in advance, sorry if my english isn't so great.