Since there are many people asking for this mod which is available on CM9/10, I was searching a bit and finally got it working. It works on any ICS/JB rom but I havent tried on GB. Thanks to rovo89 and stole38. Make sure you are following all steps correctly because if not, your phone will be stuck in a bootloop. OK, here we go ! :fingers-crossed:
Requirements:
1) Root
2) init.d Support
3) Brain
Installation:
1. Download this APK file and install it on your phone (Xposed Installer) HERE
2. Download this second app and install it on your phone (Xposed Tweakbox) HERE
3. Open the Xposed Installer and press Install/Update. Wait.
4. After installing the framework, press Soft Reboot. The phone will reboot and might boot longer than usual, dont panic
5. After the phone has rebooted, open the Xposed Installer again and go to the Modules tab.
6. Check Xposed Tweakbox. And exit the Xposed Installer.
7. Open the Xposed Tweakbox app and choose Miscellaneous from the menu.
8. Check Skip tracks with volume keys
9. Exit the application and reboot the phone
10. Enjoy !
NOTE: It works only when the screen is off (locked).
i tried this on gb and i can't install xposed apps. it gives "parsing error. there has been a problem parsing the package" (this is translated to english using google translator)
Like this……
I will try it later……
Sent from my LT18i with imoding using xda app
Nice!
Working a charm on my arc s .587 ics stock.
Nice find! :laugh:
pablopablo said:
i tried this on gb and i can't install xposed apps. it gives "parsing error. there has been a problem parsing the package" (this is translated to english using google translator)
Click to expand...
Click to collapse
usually parsing error is caused by incompatible android version..i guess this is for ics and above.
kaz93 said:
usually parsing error is caused by incompatible android version..i guess this is for ics and above.
Click to expand...
Click to collapse
i supposed it wouldn't work on gb but i tried anyway. i read the post before testing...
Really useful
Sent from my Arc S using xda premium
This isn't anything new. 7 Parts does the same, and alot more. Without any drain.
Anywho, Nice work, always good to see developing .
Nice man.will try later
Sent from my LT15i using xda premium
OsiBasi said:
This isn't anything new. 7 Parts does the same, and alot more. Without any drain.
Anywho, Nice work, always good to see developing .
Click to expand...
Click to collapse
7 parts you have to use the framework that's in it.
This you don't.
7 parts ( as far as I know) doesn't work with small apps.
This does, and if you search for the original thread, there is more that this can do.
I just wanted it for the skip track function.
Sent from my metalliArc S
As I said I don't know will it work on gb, tried only on JB and ICS
Sent from my Xperia Power
Thanx.. It works perfectly... rom uhd
Sent from my ST18i using xda premium
Thread closed. Please use the original one.
http://forum.xda-developers.com/showthread.php?t=2103944
Related
Hey,
I have some problems with my SGP 4.0 EU. First I cant open my play store. I dont know why, or what I did, but also i have to choose the language and so on at every booting. And I have to change from Samsung's kesboard to SwiftkeyX after every boot.
I hope you can help me,
Draym21
€dit:Like a wonder, after a bootloop all problems are flown away
€€dit: No they aren't... I thought so, but they came to me again -.-
Sent from my YP-G1 using XDA
Thanks for your great help...
Sent from my YP-G1 using XDA
Flash a custom rom or use the full recovery rom.
Sorry for late reply
Sent from my YP-G1 using xda premium
This is actually a known issue. Standard fix is to clear data for Google Services framework, and Google play store. Then reboot your device. (If you don't reboot, you'll probably get the hated 'unable to connect' error until you do (reboot, that is)).
If you don't know how to clear data for an app go to settings -> apps -> running ('all' on CM9) -> [name of app] .
Thanks for your help dstarfire, but I already tried this and the problem comes again after a few hours.
Sent from my YP-G1 using XDA
You could try reinstalling google play: from that same screen where you clear data, tap the 'uninstall updates' button, reboot, and launch google play (wait a minute or two after the home screen appears to let it finish it's startup tasks).
Also, you could try clearing the dalvik cahce, if you have a recovery rom installed, or access to a command prompt (either through terminal emulator, or a pc with adb installed). The first reboot after you do this will take a lot longer than usual (a few minutes more, nothing too bad)
Finally, if you've made any system tweaks, (through a tweaking app) try reversing those one by one to see if one of those might be the culprit.
If that doesn't work, you'll have to start keeping track of what you're doing, and what apps are running when it stops behaving. Maybe an app or other activity is interfering with google play.
Maybe you don't have the correct date/time? That happened to me before. Hopefully the fix is that easy for you.
My phone also hav prob with the play store!! it jus open and close immediately but my downloads and download manager is enabled at the application manager, Help me please urgent !!!
Noob_androidUser said:
My phone also hav prob with the play store!! it jus open and close immediately but my downloads and download manager is enabled at the application manager, Help me please urgent !!!
Click to expand...
Click to collapse
I think you installed the APK for Play Store rather than having flashed a GApps .ZIP. Try flashing Mini Modular GApps on the recovery screen.
__________________________________
> US Galaxy Player 5.0 (YP-G70)
• Carbon ROM 4.4.4
- By Meticulus Dev Team
• Daily Drivers Kernel
Draym21 said:
Hey,
I have some problems with my SGP 4.0 EU. First I cant open my play store. I dont know why, or what I did, but also i have to choose the language and so on at every booting. And I have to change from Samsung's kesboard to SwiftkeyX after every boot.
I hope you can help me,
Draym21
€dit:Like a wonder, after a bootloop all problems are flown away
€€dit: No they aren't... I thought so, but they came to me again -.-
Sent from my YP-G1 using XDA
Click to expand...
Click to collapse
this is a common problem it happened to me too just reset your player or you can flash the stock gb rom for your player so you have no problems it's like you just bought it
I have an rooted LG Spectrum Android Version 4.0.4.
I am trying to download and install the framwork from the Xposed Installer.
After pressing install/update, I get the following:
Copying Xposed-Disable-Recovery.zip...
Mounting /system writable...
Segmentation fault
Could not mount /system writable
Trying to continue anyway...
Segmentation fault
Failed to create a backup of /system/bin/app_process
--Any help on to how to fix this?
ksurla said:
I have an rooted LG Spectrum Android Version 4.0.4.
I am trying to download and install the framwork from the Xposed Installer.
After pressing install/update, I get the following:
Copying Xposed-Disable-Recovery.zip...
Mounting /system writable...
Segmentation fault
Could not mount /system writable
Trying to continue anyway...
Segmentation fault
Failed to create a backup of /system/bin/app_process
--Any help on to how to fix this?
Click to expand...
Click to collapse
I had such error on my SGY. I updated su binary, then I installed busybox 1.21.1 from Stericson's busybox installer (get it on Play Store).
Then problem was solved.
I'm trying to install the Framework, when I go into the app and then press install/update, I get a window that says:
Copying Xposed-Disabler-Recovery.zip...
Could not extract Xposed-Disabler-Recovery.zip
I've tried uninstalling and reinstalling the app, restarted the phone and still getting the same issue. never had this problem before, can anyone help?
MishXT said:
I'm trying to install the Framework, when I go into the app and then press install/update, I get a window that says:
Copying Xposed-Disabler-Recovery.zip...
Could not extract Xposed-Disabler-Recovery.zip
I've tried uninstalling and reinstalling the app, restarted the phone and still getting the same issue. never had this problem before, can anyone help?
Click to expand...
Click to collapse
If you are trying to install Xposed on a newer Samsung device, Knox and SELInux will fight you. I'm guessing you are running what is in your in your sig, so probably not Knox. Install this: https://play.google.com/store/apps/details?id=com.mrbimc.selinux Grant SU, change to Permissive, reboot (may not be necessary, but doesn't hurt), and try again.
es0tericcha0s said:
If you are trying to install Xposed on a newer Samsung device, Knox and SELInux will fight you. I'm guessing you are running what is in your in your sig, so probably not Knox. Install this: https://play.google.com/store/apps/details?id=com.mrbimc.selinux Grant SU, change to Permissive, reboot (may not be necessary, but doesn't hurt), and try again.
Click to expand...
Click to collapse
Im just going to try it now, will get back to see if it works
es0tericcha0s said:
If you are trying to install Xposed on a newer Samsung device, Knox and SELInux will fight you. I'm guessing you are running what is in your in your sig, so probably not Knox. Install this: https://play.google.com/store/apps/details?id=com.mrbimc.selinux Grant SU, change to Permissive, reboot (may not be necessary, but doesn't hurt), and try again.
Click to expand...
Click to collapse
I tried it. Changed it to permissive and rebooted and I still get this error
Sent from my GT-N7100 using XDA Premium 4 mobile app
What version of Xposed are you trying to install? Do you have a custom recovery? If so, Xposed 2.5+ will give you an option to install normal via system or you can pick the option to install via recovery. I'd go that route. It's at the top of the framework install part of Xposed - there is a drop down box to choose install methods.
Edit: Looked at the picture you posted and you definitely have the newer version.
es0tericcha0s said:
What version of Xposed are you trying to install? Do you have a custom recovery? If so, Xposed 2.5+ will give you an option to install normal via system or you can pick the option to install via recovery. I'd go that route. It's at the top of the framework install part of Xposed - there is a drop down box to choose install methods.
Edit: Looked at the picture you posted and you definitely have the newer version.
Click to expand...
Click to collapse
Its 2.5.1. I didnt have this issue before on other roms. Im on ditto 4.4.2 rom and its the first time it hasnt worked for me. Could it be the rom?
Sent from my GT-N7100 using XDA Premium 4 mobile app
MishXT said:
Its 2.5.1. I didnt have this issue before on other roms. Im on ditto 4.4.2 rom and its the first time it hasnt worked for me. Could it be the rom?
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It very well could be something in it that isn't being friendly to the normal framework install method, but lemme know if it works the other installation way. If it does, then not a big deal either way.
es0tericcha0s said:
It very well could be something in it that isn't being friendly to the normal framework install method, but lemme know if it works the other installation way. If it does, then not a big deal either way.
Click to expand...
Click to collapse
Will do
Sent from my GT-N7100 using XDA Premium 4 mobile app
ksurla said:
I have an rooted LG Spectrum Android Version 4.0.4.
I am trying to download and install the framwork from the Xposed Installer.
After pressing install/update, I get the following:
Copying Xposed-Disable-Recovery.zip...
Mounting /system writable...
Segmentation fault
Could not mount /system writable
Trying to continue anyway...
Segmentation fault
Failed to create a backup of /system/bin/app_process
--Any help on to how to fix this?
Click to expand...
Click to collapse
Your issue is described here: http://forum.xda-developers.com/showpost.php?p=51314174&postcount=9912 in case you never figured it out.
I'm facing a same problem after use latest ROM DN3 4.4.2. The error 'Could not extract Xposed-disabler-recovery.zip' come out after click on 'install/update' on xposed installer
ThePraetor said:
I'm facing a same problem after use latest ROM DN3 4.4.2. The error 'Could not extract Xposed-disabler-recovery.zip' come out after click on 'install/update' on xposed installer
Click to expand...
Click to collapse
And did you try my suggestion to the other person that had this issue?
es0tericcha0s said:
And did you try my suggestion to the other person that had this issue?
Click to expand...
Click to collapse
I tried the other way and I still had the issue. So I did a clean installation of the rom again and it works now.
I guess something went wring when installing the rom which may have caused the issue.
Thank you for your help
Sent from my GT-N7100 using XDA Premium 4 mobile app
---------- Post added at 11:47 AM ---------- Previous post was at 11:46 AM ----------
What you want to do also after installing the rom freshly. Install the xposed v 2.5 rather than 2.5.1 because 2.5 works perfectly and there's no real need in updating it
Sent from my GT-N7100 using XDA Premium 4 mobile app
same error
ksurla said:
I have an rooted LG Spectrum Android Version 4.0.4.
I am trying to download and install the framwork from the Xposed Installer.
After pressing install/update, I get the following:
Copying Xposed-Disable-Recovery.zip...
Mounting /system writable...
Segmentation fault
Could not mount /system writable
Trying to continue anyway...
Segmentation fault
Failed to create a backup of /system/bin/app_process
--Any help on to how to fix this?
Click to expand...
Click to collapse
I have the same error, but for me i have a kindle fire HD 7inch
I can't use the play store because when I try to install it it just crashes and so does my you tube that i got without root via apk
Same issue
I am having the same issue with the could not extract the zip file. I have tried what was suggested on this thread as well as reinstalled the rom 3 times. I have used this rom before with no problems. The only two other things I can think of trying are full wipe and format of the sd card or full unroot and revert to stock then reroot and try the rom again. Any thoughts?
Asylem said:
I am having the same issue with the could not extract the zip file. I have tried what was suggested on this thread as well as reinstalled the rom 3 times. I have used this rom before with no problems. The only two other things I can think of trying are full wipe and format of the sd card or full unroot and revert to stock then reroot and try the rom again. Any thoughts?
Click to expand...
Click to collapse
You're using 2.5 (not 2.5.1) and still having issues? What phone, rom, etc? Might try rolling back to 2.4.1.
I have a Galaxy Note 3 and running wicked rom. I was having the problem just on 2.5.1 but on 2.5 everything would load but none of the modules were working after rebooting. Everything checked out (installed and unzipped) with no errors on 2.5.
Sent from my SM-N900T using xda app-developers app
Asylem said:
I have a Galaxy Note 3 and running wicked rom. I was having the problem just on 2.5.1 but on 2.5 everything would load but none of the modules were working after rebooting. Everything checked out (installed and unzipped) with no errors on 2.5.
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Weird...What modules were you trying to use? When you go into the Framework part, does it show the app_process and XposedBridge.jar as green / active?
It did for the 2.5 version even tho nothing was working. I reverted back to 2.4.1 and things seem to be working at the moment. I was running Wanam and the kbs network module. I'm going to try and play around tonight with some other modules and see if the problem persists.
Sent from my SM-N900T using xda app-developers app
What exactly does Xposed do? Is it only a developers' tool, or can a noob/novice use it?
There's a 100 threads about exposed do a Google search
Sent from my HTC One_M8 using Tapatalk
GAPY427 said:
What exactly does Xposed do? Is it only a developers' tool, or can a noob/novice use it?
Click to expand...
Click to collapse
Here's the easy answer for this question. According to the Xposed website it changes the behavior of the system without touching APKs. If you are rooted then you can install the framework and download modules from the App (or other places) that you want to use. Using the stock rooted Rom, an example of a module that works is Sense 6 Toolbar. It modifies a lot of things in the system that you normally couldn't You have to reboot after installing the framework and you must reboot after activating a downloaded module in order for it to work. You activate modules within the app.
That's the simple version. You can google the finer details. I always get the installer from the website.
http://forum.xda-developers.com/xposed/xposed-installer-versions-changelog-t2714053
I was wondering if anyone has installed Viper4Android on this device. I had it on my previous phone and it worked flawlessly; all my music sounded amazing.
But ever since we achieved root, I couldn't successfully install it. It keeps telling me Busybox is broken or not installed, and therefore won't let me install the audio drivers.
Can anyone try installing it, if they can? My favorite band just released a new album and I'd love to hear it with a good equalizer.
Sent from my MT2L03 using XDA Free mobile app
I have just installed it successfully and it works perfectly on MT2-L05 4.4.2
I have busybox ( stericson ) installed on my phone. Maybe you can delete whatever version of busybox that you have installed and try to install stericson Busybox from playstore?
Good Luck !
4L0M said:
I have just installed it successfully and it works perfectly on MT2-L05 4.4.2
I have busybox ( stericson ) installed on my phone. Maybe you can delete whatever version of busybox that you have installed and try to install stericson Busybox from playstore?
Good Luck !
Click to expand...
Click to collapse
I've tried many Busybox versions, including stericson and it still won't work. Maybe the OS has something to do with it, if it works on KitKat and not Jelly Bean?
I failed to as well. I even tried the zip install.
Sent from my MT2L03 using Tapatalk
I tried everything today: manual Viper installation, different Busybox versions, etc., still doesn't work.
Maybe the KitKat update will make it possible. That is, if we ever get a KitKat update... I may not use a Huawei phone again if we don't get updates. There's already been so many issues (for me at least) with Emotion being so extensively modified from regular Android. And we don't have any developers at all. I'll probably go Nexus next time.
ScoobSTi said:
I was wondering if anyone has installed Viper4Android on this device. I had it on my previous phone and it worked flawlessly; all my music sounded amazing.
But ever since we achieved root, I couldn't successfully install it. It keeps telling me Busybox is broken or not installed, and therefore won't let me install the audio drivers.
Can anyone try installing it, if they can? My favorite band just released a new album and I'd love to hear it with a good equalizer.
Sent from my MT2L03 using XDA Free mobile app
Click to expand...
Click to collapse
I am using it now flawlessly. The driver cannot be installed automatically but you can manage to use the flashable zip file to install it manually.
First uninstall the app and backup your build.prop.
Download the flashable zip file here.
http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
Reboot to your TWRP and flash the zip file and reboot. The zip file would install the apk file in /system/priv-app which is actually not recognized by the Huawei system. So please manually move the apk file to /system/app or /data/app , or just install it and remove whatever file left in /system/priv-app
And then start the app you should be able to install the driver. Actually the driver has been installed after you flashed the zip file.
Since it will modify your build.prop, so please make a backup. And in my case it broke my build.prop so I had to modify the file manually. There is an example in the link above. Please append the followings at the end of your build.prop.
Code:
##Viper4android
lpa.decode=false
tunnel.decode=false
lpa.use-stagefright=false
lpa.releaselock=false
OK. Reboot and you are all set.
Again, if you encounter soft brick and the system ui fails to appear, high chances that V4a broke or deleted your build.prop. Make sure you make a back up of that file first.
dbmj said:
I am using it now flawlessly. The driver cannot be installed automatically but you can try to use the flashable zip file to install it manually...
[snip]
Click to expand...
Click to collapse
Do you have this working on the US version MT2L03? And can V4A be used to boost the handset (earpiece) volume?
Thanks,
arcadesdude said:
Do you have this working on the US version MT2L03? And can V4A be used to boost the handset (earpiece) volume?
Thanks,
Click to expand...
Click to collapse
Yes and yes. I am using the US version MT2L03 and it can be used to boost my earbud volume.
Sweet, I thought you had the non-US version at first. I'll install TWRP soon, try this and report back!
I managed to install it...but I dont know which settings will let me do this.
I want to increase the volume of the phone when using it as a phone held up to my ear without affecting battery drain. There are too many options. The FAQ links to a site to explain the settings but that site is down. Help?
Update: never mind I uninstalled viper4android (reverted to backup actually). It barely increased the volume but it would crash my phone when connecting to Bluetooth despite it being disabled for bluetooth.
Works great but shuts down when the screen sleeps. No option in the apps list to keep it running.
MikeyLee said:
Works great but shuts down when the screen sleeps. No option in the apps list to keep it running.
Click to expand...
Click to collapse
There was the option to mark it as a protected app for me but that's because i installed it to /data/app by copying it there. Did you install it to /system/app maybe?
I found it too buggy to keep though so I dont use it now.
Sent from my MT2L03 using Tapatalk
arcadesdude said:
There was the option to mark it as a protected app for me but that's because i installed it to /data/app by copying it there. Did you install it to /system/app maybe?
I found it too buggy to keep though so I dont use it now.
Sent from my MT2L03 using Tapatalk
Click to expand...
Click to collapse
No I pushed it to data/app. No protect option for me
Aw, I forgot to install TWRP and try Viper over the weekend. I don't want to risk messing up my phone during the week, leaving me phone-less!
MikeyLee said:
Works great but shuts down when the screen sleeps. No option in the apps list to keep it running.
Click to expand...
Click to collapse
In the Viper settings, you can set "Show notification", so the system won't kill the app when the screen is off. If that's not enough, what I did on my previous phone was use this app to protect Viper. Install that, go to "Tasks", tap on Viper, and select "Exclude" on the bottom left.
Root the device (search how to root the device Huwei Mate 2)
Change to permissive mode with “SELinux Mode Changer” apk from xda or search.
Enable developer options (tapping the Settings->Builld Number several times will enable the developer options, by default it is hidden from the user) and uncheck Use Nuplayer option.
Install the viper4android (get the latest untouched viper4android from original viper4android thread).
optional making viper4andriod as system app(refer how to make system app, if you want to make viper4andorid as system app)
set following values on the “build.prop” using the (Build Prop Editor, search for apk)
##Viper4android
lpa.decode=false
tunnel.decode=false
lpa.use-stagefright=false
lpa.releaselock=false
Run following commands with “Terminal Emulator” apk (search playstore or internet)
>>su
>>/system/xbin/supolicy --live "allow mediaserver mediaserver_tmpfs:file { read write execute };"
Open the viper4android and install the drivers.
Reboot the device
After reboot Launch the viper4android and check the driver status then you will see driver status normal.
feel free to play with compatible mode option or other options to suit your needs.
Thanks, guy with one post who revived a year old thread. If anyone tries this let us know how you made out, I guess.
kimtyson said:
Thanks, guy with one post who revived a year old thread. If anyone tries this let us know how you made out, I guess.
Click to expand...
Click to collapse
I've been using V4A on stock ROMS and on CM ROMS with no issues at all.
Hi there. Firstly thanks for all the work, great ROM.
I’ve just flashed the rom from stock 20160419 on my P9000.
Did a fullwipe as per the instructions. First app I Installed was ebay and it failed, tried it several times. I then installed the rest of my apps & updated SuperSU from Google Play, setup the rest of my phone, uninstalled ebay, restarted phone, reinstalled ebay and it works fine.
The only thing apart from the screen lock image that can’t be changed, is that I want to uninstall the system Nova, reinstall Nova premium version that I have and its settings. But no easy way of doing this. Have installed a second launcher, but cannot find any nova related folders in system/app/ I have located in system/priv-app/ com.teslacoilsw.launcher-1 folder, but unable to delete/uninstall anything with mixplorer.
Any ideas welcome. Thanks in advance.
Hi,
skeleton1911 is working on the eBay problem (I have it too).
For Nova: Just install premium and it should unlock the premium features (Works for me)
And for the lockscreen image look hear
http://forum.xda-developers.com/showthread.php?p=66914571
Hope I could help [emoji2]
LordWurstbrot said:
Hi,
skeleton1911 is working on the eBay problem (I have it too).
For Nova: Just install premium and it should unlock the premium features (Works for me)
And for the lockscreen image look hear
http://forum.xda-developers.com/showthread.php?p=66914571
Hope I could help [emoji2]
Click to expand...
Click to collapse
Yes my ebay is working, it worked in the end.
Doesn’t allow me to install nova Premium from APK file, goes through the motions and then gives me an X and says app not installed, have tried with mixplorer and ES file explorer.
As to lockscreen, im not familiar with gravitybox, don’t know if I have to download it from google play, if so, which one? or if it’s already included with Eragon v 1.5 cannot find it.
Thanks for the help
Nova: I installed nova premium via the play store, so I don't know way installing the apk manually is not working.
Gravity Box: 1: you have to install the xposed framework via the Eragon updater
2 Then install Gravity Box via Xposed Installer
I recommend you watching a video about Xposed on YouTube .
LordWurstbrot said:
Nova: I installed nova premium via the play store, so I don't know way installing the apk manually is not working.
Gravity Box: 1: you have to install the xposed framework via the Eragon updater
2 Then install Gravity Box via Xposed Installer
Click to expand...
Click to collapse
Hi. Thanks for your help, have downloaded xposed framework, installed installer and gravity box, changed screenlock picture. But know ebay app doest work, now it fails.
Also does someone know how to uninstall the system version of Nova launcher? I want to install a prime version I have manually from APK file.
I have tried installing prime version over the top with mixplorer and ES file explorer but after a while I get an X and says app not installed.
Thanks in advance.
No problem The eBay thing is a known issue and the developer is working on it.
manny4 said:
Hi. Thanks for your help, have downloaded xposed framework, installed installer and gravity box, changed screenlock picture. But know ebay app doest work, now it fails.
Also does someone know how to uninstall the system version of Nova launcher? I want to install a prime version I have manually from APK file.
I have tried installing prime version over the top with mixplorer and ES file explorer but after a while I get an X and says app not installed.
Thanks in advance.
Click to expand...
Click to collapse
install another launcher first and select it.
Then go to root system/priv-app and delete the nova folder+ reboot
LordWurstbrot said:
No problem The eBay thing is a known issue and the developer is working on it.
Click to expand...
Click to collapse
Works for me fine. To get it to work initially all I had to do was disable ad-aware ... reboot login into ebay then reactive the ad-aware and all was fine.
mangoman said:
install another launcher first and select it.
Then go to root system/priv-app and delete the nova folder+ reboot
Click to expand...
Click to collapse
Thanks, deleted system Nova successfully and installed prime version. :good:
DaBountyHunter said:
Works for me fine. To get it to work initially all I had to do was disable ad-aware ... reboot login into ebay then reactive the ad-aware and all was fine.
Click to expand...
Click to collapse
The ebay trick doesn’t work for me, will wait to see if there are any further developments, I can live without it for the moment