Hi dears
I have some problem about charging. First of all I am using neatrom lite + jeboo v1f rebase. The problem is when I plug in my phone for charging my phone detects it few minutes later and same when I unplug the phone. Another thing is connecting the phone to computer by usb cable. Sometimes I can see my phone in my computer but sometimes my pc give error that unknown device connected.
What do u think about this? What could be the main problem for that. In my opinion my phone's plug area.
B.rgds
Sent from my GT-I9100
You could try and re-install the Samsung USB Drivers.
If that doesn't work then try to completely wipe KIES and the installed drivers from your computer and then re-instlling it from samsung.com.
That should work since Kies has had an update, but if it doesn't, then indeed it's the USB inserter in your phone (don't know what it's called ) which is the problem.
Related
OK so yesturday I bricked my Samsung vibrant and used Odin to get back to stock was succesfull now when I try to connect I get USB not recognized. I tried device manager to uninstall and install drivers again and still nothing all it says is unknown device I tried debuging, still nothing. I dont no what to do.. if I unplug and plug in the wire I'll get it like 1 time outta like 500 times trying to connect and disconnect helllllp lol
Double check that you have the drivers install. Also double check that you do infact have USB debugging ticked. If you are getting it 1 of 500 +/- times, to me that sounds like it is a USB cord issue. Try changing ports and I have even heard of people putting it in a port closer to the back of the PC b/c it is closer to CPU and has worked. Really think that it is a bad wire though.
try reinstall the Mini kies that have usb driver in it or try on your phone in setting/applications/usb setting click ask on connection
Other way is remove the usb driver from device manager and reboot it and it will load up the driver itself.
still nothing
then you might have bad cord. If you have extra cord and see if it work. Other test is can you charge your phone if it charging then there other issue on your computer. My guess is try odin again
Phone: GTI9300
PC : WIndows XP
I have an SGS3 int'l version that has recently developed a USB issue after an unsuccessful attempt to update my firmware using Kies. Whenever the phone is plugged in via USB it will begin charging, but the PC doesnt recognize the phone at all. I have reinstalled kies with no luck.
Any ideas on the USB issue and how to possibly fix it?
Try reinstalling drivers.
Sent from my GT-I9300 using Tapatalk 2
joshnichols189 said:
Try reinstalling drivers.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I uninstalled and reinstalled KIes (which includes the device drivers)...
I had same problem, and after 2 days to find a solution, i re-install win7 and it works directly
So you've got a problem with your win7.
:/
im on the old XP. I had no problems before, but after I was trying upgrade my firmware using Kies (it was stuck during the process), so I closed the program rebootd the Pc. Then the phone is not recognized at all...only charges when usb connected..
[email protected] said:
Phone: GTI9300
PC : WIndows XP
I have an SGS3 int'l version that has recently developed a USB issue after an unsuccessful attempt to update my firmware using Kies. Whenever the phone is plugged in via USB it will begin charging, but the PC doesnt recognize the phone at all. I have reinstalled kies with no luck.
Any ideas on the USB issue and how to possibly fix it?
Click to expand...
Click to collapse
Reboot PC.
Reboot phone then replug it.
Possibly use a different USB connector
dd00 said:
Reboot PC.
Reboot phone then replug it.
Possibly use a different USB connector
Click to expand...
Click to collapse
Ya I did all that...now Im stumped..
When I connect the s3 to the pc, the phone immediately pops up "connected as a media device" , but the pc is not showing anything or picking anything up...
Try it on another computer (preferably Windows 7).
That'll allow you to see if the issue is on phone- or computer-side.
Hey guys today i got the samsung galaxy s2 gt-i9100 and the phone works fine but theres something weird happening and is that everytime i plug the phone to the computer it charges but it doesnt let me use the phone like a usb drive i cant acces my phone and in the notification bar it doesnt show the option to mount to usb, and if i put the phone in download mode odin does not recognize the device and everytime i plug the phone its says one of the usb devices attached to this computer has malfunctioned and windows does not recognize it.
Do you know what could it be? is this something than can be fix?
Before you can connect the phone via odin, you need to have the drivers installed. So first thing you need to do is have your computer detect the phone.
-See if the cable is working..if you have another cable, try your luck with that.
-clean the phone's USB port.
-try putting your phone into USB debuhging mode from the settings menu.
-Im assuming your still on stock. Dial *#7284# and on the USB option select PDA. This worked for me while I had trouble on stock.
Sent from my GT-I9100 using xda app-developers app
my phone will not be recognized by the computer no matter what i do. It recognizes my friends i777 just fine in odin and as a storage device so it isnt my drivers. With mine it only makes the connection sound and says device drivers failed to install. I am running shostock 3, philz kernel and windows 7. I have tried everything and i am out of ideas, please help. thanks
Install Kies fresh, install android sdk and update it, reboot, try different usb ports.
Also u have to disable usb debugging and let it install those drivers, enable it and let it install those drivers and boot into download mode and do a regular reboot and let it install those. Always worked for me after following those steps.
If he's friends phones works. Then I think it's the phone usb. My own phone has the same issues but my usb on phone is messed up. Says charging while its not chargin and that happens I get the whole Device not recognize and fail to install. Try cleaning your usb with 99% Isopropyl of the instructions above this post don't work out.
chibixzero said:
If he's friends phones works. Then I think it's the phone usb. My own phone has the same issues but my usb on phone is messed up. Says charging while its not chargin and that happens I get the whole Device not recognize and fail to install. Try cleaning your usb with 99% Isopropyl of the instructions above this post don't work out.
Click to expand...
Click to collapse
I will try this. I appreciate the help
I tried the suggestions.....
I downloaded the samsung drivers correctly because my pc recognizes any other samsung but no matter what i've tried it says usb device not recognized for my galaxy. Im stuck in a boot loop and the only thing i can access is download mode when i plug it in the computer. I can't access anything with the battery in, it just flashes the galaxy logo over and over. Thank you for you time in advance
Hello guys, I have a quiet severe issue with my beloved S9+. It first came up when I tried to move files from my PC to my phone. I just keeps disconnecting and then reconnecting in an interval of maybe 30 secs or something. Back then it wasn't that big of a problem, as I just downloaded the necessary files (ROMs in that case) on the phone itself. But as I am now trying to factory reset my phone it's a huge problem, because it just disconnects and reconnects while flashing in odin at about 10-30 secs*(depending on the dc interval). When rebooting afterwards an exclamation mark (flashing went wrong) comes up and tells me to use the Samsung PC software to reset it, but that won't recognize my device and I don't have any reset code or whatsoever. I tried using different computers, reinstalling drivers, rebooting - same problem.
I'd be very grateful for any tip or advice.
Try an other USB Cable. The worst case is, if your USB Port at the phone is damaged
profi_fahrer said:
Try an other USB Cable. The worst case is, if your USB Port at the phone is damaged
Click to expand...
Click to collapse
unfortunately its not about the cable, port, or pc as ive mentioned ... im afraid its something phone hard/software related
Okay so now I've flashed TWRP thru odin which was luckily possible as it didnt take that long. I'm back to RR Rom but I still have the dc/rc problem... Any other way to get back to stock?
If you plug the phone into the normal socket charger, does it also interrupt the charging?
If yes = problem at the Phone
If no = problem at any other source (maybe input current?)
profi_fahrer said:
If you plug the phone into the normal socket charger, does it also interrupt the charging?
If yes = problem at the Phone
If no = problem at any other source (maybe input current?)
Click to expand...
Click to collapse
No... it charges just normal
Try to delete the drivers from your PC. The program and in the Device Manager at Windows. Now restart your PC and boot the phone to the OS. No matter what OS. Do not open Odin yet.
Lock the Phone and plug it into the PC and wait a few minutes. Unplug it from the PC, unlock the Phone and plug it again into the PC. Wait again a few minutes, that the PC can install all drivers. Ignore it, when it disconnects. Again unplug the phone. Then open Odin and plug the Phone again into the PC.
Maybe this should help. Note: Unplug the Phone only at the PC Port, not at the Phone Port
snOwjAwk said:
Hello guys, I have a quiet severe issue with my beloved S9+. It first came up when I tried to move files from my PC to my phone. I just keeps disconnecting and then reconnecting in an interval of maybe 30 secs or something. Back then it wasn't that big of a problem, as I just downloaded the necessary files (ROMs in that case) on the phone itself. But as I am now trying to factory reset my phone it's a huge problem, because it just disconnects and reconnects while flashing in odin at about 10-30 secs*(depending on the dc interval). When rebooting afterwards an exclamation mark (flashing went wrong) comes up and tells me to use the Samsung PC software to reset it, but that won't recognize my device and I don't have any reset code or whatsoever. I tried using different computers, reinstalling drivers, rebooting - same problem.
I'd be very grateful for any tip or advice.
Click to expand...
Click to collapse
Set screen time out to 10 mins & try or Don't let the screen turn off while connected
profi_fahrer said:
Try to delete the drivers from your PC. The program and in the Device Manager at Windows. Now restart your PC and boot the phone to the OS. No matter what OS. Do not open Odin yet.
Lock the Phone and plug it into the PC and wait a few minutes. Unplug it from the PC, unlock the Phone and plug it again into the PC. Wait again a few minutes, that the PC can install all drivers. Ignore it, when it disconnects. Again unplug the phone. Then open Odin and plug the Phone again into the PC.
Maybe this should help. Note: Unplug the Phone only at the PC Port, not at the Phone Port
Click to expand...
Click to collapse
Did not help either unfortunately...
RISHI RAJ said:
Set screen time out to 10 mins & try or Don't let the screen turn off while connected
Click to expand...
Click to collapse
did not have any impact, also in download mode the screen is on the whole time no matter what