My friend wants me to flash custom rom to his s2.I have xperia x10 and galaxy nexus with me.Both i have flashed.So i have some experince with flashing but i dont see bottloader unlocking here or one click root ad all so i wanna confirm the steps here beore i do anything stupid
so are these the steps:
1.Root your stock phone with CF-Root 5.6 from http://forum.xda-developers.com/showthread.php?t=1103399
2.Then copy GT-I9100 Resurrection Remix JB v3.1.3 from http://forum.xda-developers.com/showthread.php?t=1436854 to the sd card
3.Get into cwm recovery and flash this rom after a clean wipe
4.Flash Dorimanx 7.44 after a reboot
Is this it?
aswinrulez said:
My friend wants me to flash custom rom to his s2.I have xperia x10 and galaxy nexus with me.Both i have flashed.So i have some experince with flashing but i dont see bottloader unlocking here or one click root ad all so i wanna confirm the steps here beore i do anything stupid
so are these the steps:
1.Root your stock phone with CF-Root 5.6 from http://forum.xda-developers.com/showthread.php?t=1103399
2.Then copy GT-I9100 Resurrection Remix JB v3.1.3 from http://forum.xda-developers.com/showthread.php?t=1436854 to the sd card
3.Get into cwm recovery and flash this rom after a clean wipe
4.Flash Dorimanx 7.44 after a reboot
Is this it?
Click to expand...
Click to collapse
Yeah, all good but, have you read this?
Is your device a GT I9100? Are you on 4.0.4? Got the brick bug? You know siyah is a safe kernel?
gastonw said:
Yeah, all good but, have you read this?
Is your device a GT I9100? Are you on 4.0.4? Got the brick bug? You know siyah is a safe kernel?
Click to expand...
Click to collapse
what if im flashing to 4.2.1 rom?this issue is with ics only right?
aswinrulez said:
what if im flashing to 4.2.1 rom?this issue is with ics only right?
Click to expand...
Click to collapse
The thing is where you're flashing from.
And yes, only 4.0.4's kernel's dangerous.
gastonw said:
The thing is where you're flashing from.
And yes, only 4.0.4's kernel's dangerous.
Click to expand...
Click to collapse
ok i dont have the phone yet..so will confirm its once i get it.
This issue only happens when i flash to ics rom right?not when i flash from stock ICS to JB ?
aswinrulez said:
ok i dont have the phone yet..so will confirm its once i get it.
This issue only happens when i flash to ics rom right?not when i flash from stock ICS to JB ?
Click to expand...
Click to collapse
If you want to go from stock ICS to stock JB you have no need to root.
All you do is simply reboot into download mode (Power on using Volume Up + Home + Power) then flash the JB md5 file via ODIN.
Once you have flashed the file you may find system wont boot into rom (this is normal). Just reboot into download mode and flash latest version of Siyah kernel (.tar file) which will be Siyah v6 beta4 (or above). This will give you cwm recovery, better battery life, root access, SU etc.
Go and have a look at some topics/search etc, All the info you need is already on here and if you try and take some shortcuts you may run into problems or even possibly brick your device so take some time and learn.
PS. Yes the eMMc brick bug is part of stock 4.0.4 kernel so just dont go into stock recovery. You can also brick device by your flash process getting interrupted so make sure you have drivers installed correctly (install kies) and taht you're not running any other programs while flashing and also that you have at least 55% battery.
It's a very good thing you are reading before getting the bad boy you intend to flash.
See the thing about this bug is when you make a back up, wipe things up from the recovery, and flash via oding. Once you do the wipes, you are kinda screwed.
Now, you got a couple of choices here:
1) Your device arrives with 4.0.4 ICS, flash siyah kernel (I'll get you off the hook).
2) Arrives with 4.0.3, you are good to go, no danger.
3) You can try mobile odin, it flashes with its own kernel and, apart from being fast, it's easy.
4) If you get a gingerbread version, you good as well.
That being said, I'd advice you to play with it for a couple of days instead of flashing right away.
Check out some videos, read something about ExynosAbuse (It'll get you rooted with one click) and revolv around the q&a section looking for "not to do list".
good luck and remember, keep on reading.
Sent from the little guy
TheATHEiST said:
If you want to go from stock ICS to stock JB you have no need to root.
All you do is simply reboot into download mode (Power on using Volume Up + Home + Power) then flash the JB md5 file via ODIN.
Once you have flashed the file you may find system wont boot into rom (this is normal). Just reboot into download mode and flash latest version of Siyah kernel (.tar file) which will be Siyah v6 beta4 (or above). This will give you cwm recovery, better battery life, root access, SU etc.
Click to expand...
Click to collapse
Thanks a lot for all your help
the ressurection remix rom i downloaded came as zip file.I can flash it from cwm itself right?
and regarding the kernel im a bit confused between siyah and dorimanx .I know it depends on phone but what would u suggest?ur personal choice
and i need one more help.I need a vanilla jb rom.Not too much bloatware and with less bugs as possible and tweaked for performance and battery.The problem is net speed is very very low...trust me..i cannot try most of them unless i wait for weeks.So if anyone can suggest i can download that alone and do
yeah, via recovery. Read sonething about cmw.
About custom ROM, can't tell you what to flash, do sone diggin in the android development sectio, whatch some vids, It's all here at xda.
Sent from the little guy
gastonw said:
yeah, via recovery. Read sonething about cmw.
About custom ROM, can't tell you what to flash, do sone diggin in the android development sectio, whatch some vids, It's all here at xda.
Sent from the little guy
Click to expand...
Click to collapse
Thank you
don't mention it.
keep reading & happy flashing.
Sent from the little guy
Related
hi guys, first post
ive had my rooted galaxy s2 with the latest siyah kernel 3.3.2, i had cwm recover 5 and rom manager
i tried to flash cyanogen mod through rom manager, following the steps it gave me, i downloaded the files through rom manager and went through all the prompts till i clicked agee to go into recovery mode.
once it did that the phone shut off but would not turn on again so i went to turn on manually, it loads the samsung galaxy screen with the yellow triangle but goes straight into a white flashing screen.
Ive tried taking the battery out, leaving it and putting it back in again, still a flashing screen,
check what i9100 you have and download correct cm9.
using cwm format data system cacha sdcard dalvik
flash cm9 using cwm
rommanager doesnt work on GS2
atifsh said:
check what i9100 you have and download correct cm9.
using cwm format data system cacha sdcard dalvik
flash cm9 using cwm
rommanager doesnt work on GS2
Click to expand...
Click to collapse
i have the international 19100T
ahh rats i should have known rom manager does not work, , im just stuck in a white flash screen on boot up, cant get to cwm, although i can get into odin
would reflashing my kernel on odin get me through? everything is back up onto my sd card.
Try flashing a kernel first, and if that doesn't work, flash a rom in Odin, re-root your phone & restore your backup. But yeah, don't use Rom Manager with a kernel that has CWRecovery. One or the other. Rom Manager has a habit of doing stuff like what's happened to you on SGS2's which also have CWRecovery installed.
MistahBungle said:
Try flashing a kernel first, and if that doesn't work, flash a rom in Odin, re-root your phone & restore your backup. But yeah, don't use Rom Manager with a kernel that has CWRecovery. One or the other. Rom Manager has a habit of doing stuff like what's happened to you on SGS2's which also have CWRecovery installed.
Click to expand...
Click to collapse
awesome, I tried flashing the latest siyah kernel, the one that i already had on my phone before the problems, that didn't do anything to get me through, any suggestions on which kernel/rom to flash?
because you are on siyah and im not comfortable with that, please flash a stock kernel or cfroot kernel and format system data partitions after that.
now flash any official stock ICS or GB rom using Odin.
atifsh said:
because you are on siyah and im not comfortable with that, please flash a stock kernel or cfroot kernel and format system data partitions after that.
now flash any official stock ICS or GB rom using Odin.
Click to expand...
Click to collapse
ohh sweet baby jesus im i flashed a cf kernel and now im into cwm on 4.0.1.5, can i just normal reboot my phone now?
No need to format anything. Given you want to use CM9, I'd recommend you flash CM9 Resurrection Edition in Odin, put the latest CM9 nightly & Gapps on your internal/external SD card then flash that nightly & Gapps in CWM (read the first page of the CM9 discussion thread thoroughly & follow the instructions to the letter. From there you can stick with the CM9 stock kernel or flash whatever other kernel you want to use (provided it's CM9 compatible).
From then on, if you want to flash CM9 nightlies, do it via CWM/CWRecovery, just don't use Rom Manager this time I use CM9 as well & I have it frozen because I use Siyah (which has CWM).
MistahBungle said:
No need to format anything. Given you want to use CM9, I'd recommend you flash CM9 Resurrection Edition in Odin, put the latest CM9 nightly & Gapps on your internal/external SD card then flash that nightly & Gapps in CWM (read the first page of the CM9 discussion thread thoroughly & follow the instructions to the letter. From there you can stick with the CM9 stock kernel or flash whatever other kernel you want to use (provided it's CM9 compatible).
Click to expand...
Click to collapse
alrighty! thanks for the info, is cf kernel compatible with cm9? i want to just have one kernel that'll handle most roms, any suggestions?
ive reloaded my old stable phone version, the version i saved before trying to flash cyanogen mod with rom manager, this version has siyah and stock rom, back to square one *phew*
i still say wipe first, cm9 will come with its own latest cwm that can be used to flash any custom roms after.
flashing via odin version is easy and fool proof as it has everything bundled for correct working of cm9.
If you flash CM9 the CM9 kernel will overwrite/replace your CFRoot kernel, which is fine. As I said in my previous post you can stick with that if you're happy with it, or you can flash any other kernel that's CM9 compatible.
No suggestions/recommendations. Because your experience will not be the same as someone else's using a given rom or kernel. If you want to go down that path, try some kernels to find one you like. To see if a kernel is compatible with CM9, read the the dev thread devoted to the kernel in question.
OK. Given you're back @ square one, Atifsh is right when he says flashing the Resurrection version (Odin version) then flashing Gapps/nightly from there is probably a good way to go for you. Once you've done that, you'll be able to flash CM9 nightlies via CWRecovery. As said previously, read that first page of the CM9 discussion thread/instructions thoroughly before you do anything.
keegan25 said:
alrighty! thanks for the info, is cf kernel compatible with cm9? i want to just have one kernel that'll handle most roms, any suggestions?
ive reloaded my old stable phone version, the version i saved before trying to flash cyanogen mod with rom manager, this version has siyah and stock rom, back to square one *phew*
Click to expand...
Click to collapse
Something similar happened to me too. I flashed stock XWLPG, then siyah 3.3.2 and did a factory reset. After that, got stuck in a flashing white screen after the yellow triangle.
What I did: boot on download mode, flash XWLPG over PC Odin once more, did a full wipe BEFORE flashing siyah and then siyah. Everything went ok this time, but eventually I found out that every time I do a factory reset after siyah that problem would occur.
Regards,
Sent from my GT-I9100 using XDA
keegan25 said:
i have the international 19100T
ahh rats i should have known rom manager does not work, , im just stuck in a white flash screen on boot up, cant get to cwm, although i can get into odin
would reflashing my kernel on odin get me through? everything is back up onto my sd card.
Click to expand...
Click to collapse
exact same problem, except i can't put it into download mode?
i know it's powerbutton vol down but it's not working? any ideas?
acbutcher91 said:
exact same problem, except i can't put it into download mode?
i know it's powerbutton vol down but it's not working? any ideas?
Click to expand...
Click to collapse
Power + vol down + home key?
Galaxy S2 i9100.
Bad chip.
Bad Firmware: Stock 4.0.4 with (Stock) Kernel XWLPT.
Rooted with S2Root+Using SuperSU.
Searched forums, only similar thread is for Galaxy Tab. I'm assuming it's not relevant enough for me to follow it directly.
If possible, explain it like I'm 5:
What is the safest way to install a custom ROM? (Ideally, I want to install CM9 and later CM10 when it is more stable). I've seen people saying to flash Siyah kernel first, then do whatever afterwards. How can I do this? Almost a complete noob here, what buttons do I press in Odin and what procedure do I follow to flash a safe kernel then a custom ROM.
NB: USB is a little buggy, on-device flashing preferred for that reason.
Redclient said:
Galaxy S2 i9100.
Bad chip.
Bad Firmware: Stock 4.0.4 with (Stock) Kernel XWLPT.
Rooted with S2Root+Using SuperSU.
Searched forums, only similar thread is for Galaxy Tab. I'm assuming it's not relevant enough for me to follow it directly.
If possible, explain it like I'm 5:
What is the safest way to install a custom ROM? (Ideally, I want to install CM9 and later CM10 when it is more stable). I've seen people saying to flash Siyah kernel first, then do whatever afterwards. How can I do this? Almost a complete noob here, what buttons do I press in Odin and what procedure do I follow to flash a safe kernel then a custom ROM.
NB: USB is a little buggy, on-device flashing preferred for that reason.
Click to expand...
Click to collapse
Yes,, you need to flash a custom kernel.
1. First post your full ROM details
2. Can you confirm that you have ROOT access?
3. If your USB is buggy, you still flash Siyah kernel using mobile Odin, or the temporary CWM recovery. Root access is needed.
Thanks for the really fast reply.
Jokesy said:
Yes,, you need to flash a custom kernel.
1. First post your full ROM details
2. Can you confirm that you have ROOT access?
3. If your USB is buggy, you still flash Siyah kernel using mobile Odin, or the temporary CWM recovery. Root access is needed.
Click to expand...
Click to collapse
1. Stock 4.0.4 from samsung; Kernel version 3.0.15-I9100XWLPT-CL941023
2. 100% have root access. Running Droidwall (which is working) among other things
3. I'm unsure if it's the phone, USB port or drivers which are buggy.
Is it possible to get a definitive procedure to flashing Siyah with mobile Odin? (presuming it's safe to do so). After that, is it safe to just flash the full CM9 ROM with CWM?
The safest way to avoid the emmc bug is to flash a custom kernel. Like siyah or dorimanx. If you have root access, and CWM, you can install one of them. Do you have CWM? well then follow these steps.
-Download a custom kernel. Eg the .ZIP file of the latest version of siyah kernel for S2 from gokhanmoral's site.
-Store it in your internal SD card on your phone.
-Boot into recovery. ( Vol-up + Home + Power button )
-Go to: install zip from SD -> install zip from internal SD
-select the kernel's zip file
-select 'yes'
Let the phone reboot once your done. You should have a custom kernel and no chance of the emmc bug bricking your phone.
The reason I suggest using CWM rather than Odin, is incase you have a faulty usb port, that might pose a problem while installing via Odin.
Hope this helps.
HAXTREME said:
The safest way to avoid the emmc bug is to flash a custom kernel. Like siyah or dorimanx. If you have root access, and CWM, you can install one of them. Do you have CWM? well then follow these steps.[...]
Click to expand...
Click to collapse
I have root access but no CWM. When I originally rooted the phone the sole reason was for droidwall.
Is it safe to install CWM and flash a custom kernel as long as I don't do any data wipes?
Can I install a custom kernel and have the phone as is (without noticeable differences) until I flash a custom ROM?
What happens to SuperSU and it's settings when I flash a custom kernel (and will I still have root access)?
Finally, if anything screws up what is the recovery procedure? I don't have a copy of this kernel/firmware as I installed it as an OTA update.
Redclient said:
I have root access but no CWM. When I originally rooted the phone the sole reason was for droidwall.
Click to expand...
Click to collapse
you can download cwm or temporary CWM. Just have a look around for the links.
Redclient said:
Is it safe to install CWM and flash a custom kernel as long as I don't do any data wipes?
Click to expand...
Click to collapse
yeah it is. Even wiping data won't cause problems. Siyah isn't affected by the emmc bug.
Redclient said:
Can I install a custom kernel and have the phone as is (without noticeable differences) until I flash a custom ROM?
Click to expand...
Click to collapse
yea your phone will still look the same. A custom kernel doesn't change your ROM or data.
Redclient said:
What happens to SuperSU and it's settings when I flash a custom kernel (and will I still have root access)?
Click to expand...
Click to collapse
yes, you'll still have root.
Redclient said:
I
Finally, if anything screws up what is the recovery procedure? I don't have a copy of this kernel/firmware as I installed it as an OTA update.
Click to expand...
Click to collapse
You can make a nandroid backup with cwm. That will create an image of the current state of your phone to restore incase necessary. Just make sure u have a custom kernel and follow steps mentioned in the guides on this site and you shouldn't need to worry
Sent from my GT-I9100 using xda app-developers app
Thanks for all the help so far.
I've installed Mobile Odin (v3.35)
I've installed FlashKernel (v2), there was a v1 higher up the page but I'm going to assume that v2 has some bug fixes or other updates (please correct me if I should be using FlashKernel-I9100-v1 rather than v2.
Now, I'm not sure where to go: Should I install CWM or flash straight to Siyah kernel. CWM seems safer since I can do a backup and hopefully have some access if anything goes wrong.
How do I flash CWM with Mobile Odin? Which flash (mode? partition? not sure about terminology here) do I choose (Kernel, ..., etc) and probably importantly: which version of CWM should I be using? I've seen many threads talking about CWM4/5/6. Are they simply updated versions? designed for different kernels/android versions? Are there any specific versions which try to mitigate the superbrick bug?
Redclient said:
Thanks for all the help so far.
I've installed Mobile Odin (v3.35)
I've installed FlashKernel (v2), there was a v1 higher up the page but I'm going to assume that v2 has some bug fixes or other updates (please correct me if I should be using FlashKernel-I9100-v1 rather than v2.
Now, I'm not sure where to go: Should I install CWM or flash straight to Siyah kernel. CWM seems safer since I can do a backup and hopefully have some access if anything goes wrong.
How do I flash CWM with Mobile Odin? Which flash (mode? partition? not sure about terminology here) do I choose (Kernel, ..., etc) and probably importantly: which version of CWM should I be using? I've seen many threads talking about CWM4/5/6. Are they simply updated versions? designed for different kernels/android versions? Are there any specific versions which try to mitigate the superbrick bug?
Click to expand...
Click to collapse
Flash Siyah kernel straight using mobile Odin. It comes with a permanent CWM recovery too.
Todays almost all kenels are safe
so resure yourself
And be careful, when you flash rom in recoverymod
if. battery is off when flash rom, your device have hard brick
so you must have change your main board
I'm korean.. so my english speak is not so good.
Sent from my GT-I9100 using xda premium
Siyah kernel flashed and working perfectly. Didn't realise how instant it would be. Thanks again to everyone, this community is friendly and helpful.
I'm just wondering as I'm in the same boat as the OP was once in.
When it comes to choosing the Kernel does it matter if its JB based or ICS because I'm on the stock ICS rom.
wmichael10 said:
I'm just wondering as I'm in the same boat as the OP was once in.
When it comes to choosing the Kernel does it matter if its JB based or ICS because I'm on the stock ICS rom.
Click to expand...
Click to collapse
You don't have root access, right? Flash a custom kernel with Odin (like Siyah), but make sure it's compatible with your firmware. So if you're flashing Siyah, flash the version (v4 and/or v5 is what I thought) that's meant for ICS, otherwise your phone won't work.
Sent from the Matrix
Actually I used another method that allowed me to gain root access, but I'm on stock kernel and rom. I kind of feel safer when flashing a kernel and rom from recovery.
So say I use Siyah ICS for my Stock ICS rom, If I wanted to flash a JB rom like the one leaked from samsung would I need to also flash the Siyah kernel for JB too?
I have I9100T as well and 4.0.4 on it, what do I do? Will Siyah work for me?
Hello guys, So I'm fairly new to rooting (first android/smartphone/ but good experience with PCs) and was wondering if anyone could help me out. I'm using the ICS 4.0.3 build from kies, with the UCLE5, and build number IML74k.CLE5.
*from reading the stickies I've learned to NOT use ROM manager, galaxys2root.com, and to not use the STOCK ICS method as it has a brickbug ( the ones on forum)
Last night I tried rooting my phone by using Doomlord's guide but it didn't work ( I had unknown sources, and USB debugging on*but my phone was on and not on download mode or anything* )
Then I tried SuperOneClick root and it was just stuck on one of the steps, and the only way to stop it was to end task the program and ADP...any tips on what I'm doing wrong? Sorry for being a nub lol
*please move to Q and Q accidently posted in general section
Just use Odin to flash any ics kernel u want.
so I guess Ill try to flash using step 3. on http://forum.xda-developers.com/showthread.php?t=1285894 using ODIN3, then install a kernel ( i want to use 3.3d Siyah ) and then flash a custom ROM (like semi_v17) *the guide from here http://forum.xda-developers.com/showthread.php?t=1650948 correct?
I also want to add that after i Root using 2c.) How to root by flashing Entropy512's Return/Unbrick to Stock, Kernel + Rooted System Package with Modem using Odin3 One-Click Downloader (Windows) that method, I boot into 3E recovery and perform data/factory wipe, wipe cache, dalvik and reset extweaks profiles...then install semi_v17 ROM while in recovery mode and done? Just making sure before I do anything with my phone
I know that relying on the sticky posts leaves some confusion because of Gingerbread and ICS versions. The Entropy512 stock plus root is a Gingerbread firmware with stock kernel and root. If you go that route, you then need to install a Gingerbread custom kernel, and then you can flash Semi from ClockworkMod Recovery if that is what you want.
In my opinion, since you are already on UCLE5 stock, the best route would be to flash the UCLE5 stock plus root package that you can download from the development section, and then install a custom ICS kernel. I know you were trying to avoid the Emmc Superbrick Bug, but since you have stock UCLE5 with the stock kernel on the phone now, you already (supposedly) have the Emmc Superbrick Bug present in the stock kernel. All the instructions needed to install a custom kernel are contained in the OP of the UCLE5 stock plus root thread.
If you have additional questions, just ask.
creepyncrawly said:
I know that relying on the sticky posts leaves some confusion because of Gingerbread and ICS versions. The Entropy512 stock plus root is a Gingerbread firmware with stock kernel and root. If you go that route, you then need to install a Gingerbread custom kernel, and then you can flash Semi from ClockworkMod Recovery if that is what you want.
In my opinion, since you are already on UCLE5 stock, the best route would be to flash the UCLE5 stock plus root package that you can download from the development section, and then install a custom ICS kernel. I know you were trying to avoid the Emmc Superbrick Bug, but since you have stock UCLE5 with the stock kernel on the phone now, you already (supposedly) have the Emmc Superbrick Bug present in the stock kernel. All the instructions needed to install a custom kernel are contained in the OP of the UCLE5 stock plus root thread.
If you have additional questions, just ask.
Click to expand...
Click to collapse
So I flash the build from this [Heimdall][Odin][Stock][Root]UCLE5 Stock ICS with Root..(no need to flash according to thread)
pick one of the the three kernels (prob going with AJ siyad) and install using Odin lite..then ROM? (like Semi v17?) it gets confusing at some parts cause on the Stock ICS + root section is says to wipe before flashing if coming from another base (im guessing since im on the UCLE5 base i dont need too)
AHomelessGuy said:
So I flash the build from this [Heimdall][Odin][Stock][Root]UCLE5 Stock ICS with Root..(no need to flash according to thread)
pick one of the the three kernels (prob going with AJ siyad) and install using Odin lite..then ROM? (like Semi v17?) it gets confusing at some parts cause on the Stock ICS + root section is says to wipe before flashing if coming from another base (im guessing since im on the UCLE5 base i dont need too)
Click to expand...
Click to collapse
Yeah just use mobild odin to flash a kernel and then boot into recovery then wipe then flash semi. I really wish we could update those stickies. They are pretty confusing
One last question...sorry for being a complete noob lmao after I get the kernel, I boot into CWM recovery wipe...and use mobile odin to flash semi?
AHomelessGuy said:
One last question...sorry for being a complete noob lmao after I get the kernel, I boot into CWM recovery wipe...and use mobile odin to flash semi?
Click to expand...
Click to collapse
once you have CWM, you use CWM to flash roms.....
Pirateghost said:
once you have CWM, you use CWM to flash roms.....
Click to expand...
Click to collapse
OK so i got the siyad kernel installed now with the phone stuff wiped (no apps installed yet, not even google account set up) so just put the ROM i want into SD card boot into recovery mode, and install zip from SD card?
AHomelessGuy said:
OK so i got the siyad kernel installed now with the phone stuff wiped (no apps installed yet, not even google account set up) so just put the ROM i want into SD card boot into recovery mode, and install zip from SD card?
Click to expand...
Click to collapse
yes
Thanks everyone everything seems to be working fine reinstalling my apps now and setting up my phone
**EDIT: I have noticed that my buttons on the bottom aren't as bright as they used to be..gonna go look for solutions/problems causing it
Guys I need help with rooting and installing CWM recovery on my phone so i can install custom roms. Im running on stock 4.03 ZSLPE...What is the safest way for me without bricking my phone. Because 1 of my friends super bricked his phone after trying to install a custom rom..Plz help
Try cf-foot ( kernel ) or try the zip methord ( i forgot the link , search in google ,this is a little bit safer )
Sent from my GT-I9100 using xda premium
Mebin Robin said:
Try cf-foot ( kernel ) or try the zip methord ( i forgot the link , search in google ,this is a little bit safer )
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Cf root will just root the phone ryt ?? What i want is to have CWM recovery to be able to install custom roms
pasanjay said:
Cf root will just root the phone ryt ?? What i want is to have CWM recovery to be able to install custom roms
Click to expand...
Click to collapse
Cf root will give u root and CWM recovery, so u're be able to install custom rom
1. Download any version of CWM from here
2. Get desired rom (kernel too if you want)
3. Place everything in Externel SDcard
4. Boot into stock recovery (Power+Home+Vol up)
5. Use stock recovery to flash CWM
6. Backup Current stock rom
7. Wipe the usual
8. Flash Custom rom (Or just kernel)
9. Reboot
10. ?? Profit ??
Now you got Custom rom or Kernel + Full stock rom backup (can always get stock rom from sammobile if you lose it)
-Grift- said:
1. Download any version of CWM from here
2. Get desired rom (kernel too if you want)
3. Place everything in Externel SDcard
4. Boot into stock recovery (Power+Home+Vol up)
5. Use stock recovery to flash CWM
6. Backup Current stock rom
7. Wipe the usual
8. Flash Custom rom (Or just kernel)
9. Reboot
10. ?? Profit ??
Now you got Custom rom or Kernel + Full stock rom backup (can always get stock rom from sammobile if you lose it)
Click to expand...
Click to collapse
Thank u for the response. But im a bit scared flash or wipe in temp touch recovery. Because a friend of mine got his s2 super bricked while trying to flash on stock 4.04 kernel. does this emcc bug affect 4.03 stock kernels as well? So can i just flash the latest Siyah Kernel using ODIN ??
Any time you root/flash a Rom theres a chance to brick your phone. What -Grift- said is the easiest and best way to flash a custom Rom in my opinion. Just make a Nandroid backup, delete data and cache, install the zip file from your SD card. I've flashed 4 Roms so far with this phone, all successfully. Currently I'm running Cyanogenmod 7 on my DINC 2. Good luck on whatever method you choose.
Sent from my Droid Incredible 2 using Tapatalk.
Go into download mode, connect your phone to your computer and use Odin to flash a custom kernel to your phone. That done, you have root and you're safe from the emmc superbug. (EDIT: although 4.0.3 doesnt have the bug, if thats what is bothering you) You can then flash a custom rom or whatever else you please. Use the TAR version of siyah v4.1.5 from www.gokhanmoral.com
Instructions on how to use Odin are available all over this site and on the web in general. Search and you'll get it.
If you don't wanna use Odin, your only other option is flashing temporary CWM. Search for rachmat3's method or use the one mentioned above. All three are equally safe provided you read up on the procedure adequately.
99.9% of the phones getting bricked is coz people jump headlong into the procedure without first bothering to educate themselves on how to go about it. They get what they deserve.
Sent from my GT-I9100 using xda app-developers app.
If noobs on xda have taught me one thing, its that smartphones just aren't for everyone.
Or just wipe only when you have flash the rom (custom recoveries are safe e.g siyah dorimanx)
Edit: AFAIK 4.0.3 are safe the bug is with leaked 4.0.4?
HAXTREME said:
Go into download mode, connect your phone to your computer and use Odin to flash a custom kernel to your phone. That done, you have root and you're safe from the emmc superbug. (EDIT: although 4.0.3 doesnt have the bug, if thats what is bothering you) You can then flash a custom rom or whatever else you please. Use the TAR version of siyah v4.1.5 from www.gokhanmoral.com
Instructions on how to use Odin are available all over this site and on the web in general. Search and you'll get it.
If you don't wanna use Odin, your only other option is flashing temporary CWM. Search for rachmat3's method or use the one mentioned above. All three are equally safe provided you read up on the procedure adequately.
99.9% of the phones getting bricked is coz people jump headlong into the procedure without first bothering to educate themselves on how to go about it. They get what they deserve.
Sent from my GT-I9100 using xda app-developers app.
If noobs on xda have taught me one thing, its that smartphones just aren't for everyone.
Click to expand...
Click to collapse
Thank you for the info. I know few things about rooting and custom roms. I have flashed so moany roms with my HTC. Im new to samsung and odin. Thats why i wanted to make sure before doing anything stupid.
Thank u all for the help. I successfuly flashed Siyah kernel to get root and CWM
Hello. I have galaxy S2, and I wanted to install CWM. I installed it (CWM-KitKatCompatible-i9100) with odin with auto reboot unchecked and after that it doesn't boot up. It can go to odin and CWM modes, but the android doesn't launch. I did a recovery to phone storage, but still I cant launch the phone... Can anyone help me?
Flash a compatible kernel to your installed rom via recovery. Or you can flash an insecure kernel via Odin.
Simple cwm flashing won't boot up your phone.
banjara said:
Flash a compatible kernel to your installed rom via recovery. Or you can flash an insecure kernel via Odin.
Simple cwm flashing won't boot up your phone.
Click to expand...
Click to collapse
Would you mind explaining how to flash a compatible kernel to my phone via recovery? Also I didn't install any rom just cwm. And where should I get a proper kernel to my android? Sorry for dumb questions, but I'm not experienced enough as you see...
V6xas said:
Would you mind explaining how to flash a compatible kernel to my phone via recovery? Also I didn't install any rom just cwm. And where should I get a proper kernel to my android? Sorry for dumb questions, but I'm not experienced enough as you see...
Click to expand...
Click to collapse
Well, there are 3 kernels which are quite popular here which have their depth range till kitkat roms.. A simple search on xda for them will lead you to the respective threads.
1. Gustavo's
2. Dorimanx
3. Apolo
If you want a KK rom then download a KK compatible kernel mentioned in the op for those threads, put that on external sdcard and boot to recovery. There you can flash the Kernel file. As you don't have a rom on your phone it would be better if you download a rom and gapps package too and flash them. After flashing a kernel, reboot to recovery and then flash rom and gapps.
If it's difficult for you to put those files on sdcard, you can flash a stock rom via Odin, flash a kernel e.g. philz, apolo,hirox via Odin. Search for these keywords here on xda. Once you have a working kernel and rom, you can download a custom rom and gapps, put it on your phone and follow the procedure which I mentioned first.
If my steps are still confusing to you then you require to search for these terminologies here on xda,read and understand them carefully and then proceed.
You didn't mention what OS/Firmware was on your phone before you started.....this is VERY important to know as it will decide what you can / cannot flash.....
Custom kernels are OS version dependent.....some will only work with ICS, others will only work with JB.....some are exclusively for KK.
You need to check this.....
My wife says I'm a phone geek....She's probably right
keithross39 said:
You didn't mention what OS/Firmware was on your phone before you started.....this is VERY important to know as it will decide what you can / cannot flash.....
Custom kernels are OS version dependent.....some will only work with ICS, others will only work with JB.....some are exclusively for KK.
You need to check this.....
My wife says I'm a phone geek....She's probably right
Click to expand...
Click to collapse
well I couldn't check cause it couldn't boot up, unless there's another way... But whatever I managed to write 4.4.2 Kitkat on my S2 and there's alot missing feature's like, I cant organise my program menu, I cant add many widgets that I had used in my previous android, there are no notes, phone file explorer and other what is irritating... Maybe there's some another pack that I missed when installing or what?