Related
Just wondering if someone can point me in the right direction. I was wondering if they make a rubber fitted case for the Tilt 2? Kinda like an Iphone one...
I have one for my US Tmo that I got from the Tmo store............
Don't order the one from boxwave http://www.boxwave.com/products/praetoriancrystalslip/htc-tilt-2-praetorian-crystal-slip-case_3729.htm
Top piece won't stay on!
Merge or delete redundant thread
Here it is!
http://forum.xda-developers.com/showthread.php?t=524059
Brickcity said:
Don't order the one from boxwave http://www.boxwave.com/products/praetoriancrystalslip/htc-tilt-2-praetorian-crystal-slip-case_3729.htm
Top piece won't stay on!
Click to expand...
Click to collapse
I ordered this one for my tilt 2, you have to slide the keyboard out in order to get the top and bottom piece on. It takes a while, but once I got it on, it stayed.
quedogf94 said:
I ordered this one for my tilt 2, you have to slide the keyboard out in order to get the top and bottom piece on. It takes a while, but once I got it on, it stayed.
Click to expand...
Click to collapse
Piktars???
Tilt 2 BOXWAVE RUBBER CASE REVIEW
orb3000 said:
Here it is!
http://forum.xda-developers.com/showthread.php?t=524059
Click to expand...
Click to collapse
This thread is for the Tilt 2 Rubber cases only!
My Boxwave Praetorian Crystal Slip for the Tilt 2 review.
The first picture shows the gap you will get with the top piece on or off!
In the last picture. There is a little piece towards the right of the screw, that the top part of the case won't fit over.
If you let anybody check out your phone with this case on it will come right off.
Nice pics...
I'm glad you took a pic of just the bottom piece. I've actually thought about just buying the bottom piece since that's all I'm concerned about...it seems way too thick. I know I wouldn't like it on my phone and would end up just tossing it.
I'm really looking for one of those silicone back covers that they have for the iPhone...
Thanks again,
pimp4cheddar said:
Nice pics...
I'm glad you took a pic of just the bottom piece. I've actually thought about just buying the bottom piece since that's all I'm concerned about...it seems way too thick. I know I wouldn't like it on my phone and would end up just tossing it.
I'm really looking for one of those silicone back covers that they have for the iPhone...
Thanks again,
Click to expand...
Click to collapse
The bottom part of the case is good and fits really nice, but for $20? If it came in black maybe, I said maybe!
Right now I using my old Tilt case after I had the velcro replaced and with the bottom part on, it's way to tight.
Brickcity said:
This thread is for the Tilt 2 Rubber cases only!
Click to expand...
Click to collapse
No prob mate, just wanted to point that the other thread I mentioned is for ALL
SILICON case for Rhodium (any model)
So instead of having 4 threads for avery model the idea was to have one for all models, that´s all.
Peace
Brickcity said:
This thread is for the Tilt 2 Rubber cases only!
My Boxwave Praetorian Crystal Slip for the Tilt 2 review.
The first picture shows the gap you will get with the top piece on or off!
In the last picture. There is a little piece towards the right of the screw, that the top part of the case won't fit over.
If you let anybody check out your phone with this case on it will come right off.
Click to expand...
Click to collapse
WOW! Thanks for posting your opinion and the pics. I was about to order one of these. I totally agree that the bottom piece is too thick and that's a HUGE gap it creates between the top and the base. That seems like it'll wear the springs out. Sucks that there just doesn't seem to be a good rubber case for the Tilt 2. I'm really hoping Seidio will make an Innocase Surface for the Tilt 2. They already make them for the Sprint and Verizon version of the TP2. I've read where people have been told they're going to make one and others where they've said they will not. I'm just saying I'll believe it when I see it.
Kinda lame Seidio...
orb3000 said:
No prob mate, just wanted to point that the other thread I mentioned is for ALL
SILICON case for Rhodium (any model)
So instead of having 4 threads for avery model the idea was to have one for all models, that´s all.
Peace
Click to expand...
Click to collapse
We understand your efforts of trying to merge all into one thread and all, but honestly, I would prefer 4 Separate threads. If i have the ATT tilt 2 (which I do), I would not want to read OVER 30 PAGES of freakin' reviews and such JUST for my one model. We understand your good Samaritan acts here, but seriously, people don't have the patience or time for that -- UNLESS, every 5 pages, you would like to do the honors of summarizing which cases work for every model since you want to dump it into a "come-one-come-all" thread. I don't know about you, but your thread is too long for the newcomers who are looking up a good case for their model. Besides, it doesn't hurt to have more threads in this section because its pretty slow paced.
Sorry, was kind of getting tired of you rejecting every thread that pops up about this.
Oh, and many of the posts in that thread are close to useless and does not help at all. So basically ---> your life is wasted reading that long of a thread. Make a new one at least please.
New one here
http://forum.xda-developers.com/showthread.php?t=524059
I just got my Flyer from Cowboom yesterday, and it looked brand new. However, a lot of times the tablet will start pulling the lock itself, exiting applications by itself, click on random buttons by itslef, etc. Is this a normal thing to occur? How can I fix it? Should I send it back for a replacement?
Do you really need to ask ? Nope not normal.
Definitely not normal. Try doing a factory reset of the device and see if that it. If it doesn't, I'd return it.
Sent from my HTC Flyer using xda premium
In a thread on the Flyer forums, the poster had the same problem and someone told him it is fixed with a screen protector? Do you think that fixes it, because it doesn't seem like it would be a problem with the screen.
http://www.youtube.com/watch?v=P5nSpw7Ee0k&feature=youtube_gdata_player
I'm controlling it for you.
j510 said:
I'm controlling it for you.
Click to expand...
Click to collapse
Hahahaha!
---------- Post added at 11:10 AM ---------- Previous post was at 11:08 AM ----------
mcord11758 said:
http://www.youtube.com/watch?v=P5nSpw7Ee0k&feature=youtube_gdata_player
Click to expand...
Click to collapse
Freaking hilarious!
I have a similar problem. I recently bought a used Flyer and it came with the HTC pen. Here's my problem, whenever I use the pen to take notes, sometimes the pen will continue to write even though the tip isn't touching the screen. The tip is close to the screen but doesn't actually touch it. I was wondering if I had a defective pen.
lotusblade said:
I have a similar problem. I recently bought a used Flyer and it came with the HTC pen. Here's my problem, whenever I use the pen to take notes, sometimes the pen will continue to write even though the tip isn't touching the screen. The tip is close to the screen but doesn't actually touch it. I was wondering if I had a defective pen.
Click to expand...
Click to collapse
There's too much ink in the pen. No that happens sometimes with new batteries
If you don't get that sorted out soon, your Flyer may go blind...
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
I had the same problem with mine and I thought the screen digitizer had gone bad. Mine was in a case that had some metal in it and after I took it out I have had no problems at all. Yeah, it sounds stupid but I now have a otterbox case which does not have metal and I have not had any problems. As far as the pen I took the batteries out and put them back in and fixed the pen problem.
rja486 said:
I had the same problem with mine and I thought the screen digitizer had gone bad. Mine was in a case that had some metal in it and after I took it out I have had no problems at all. Yeah, it sounds stupid but I now have a otterbox case which does not have metal and I have not had any problems. As far as the pen I took the batteries out and put them back in and fixed the pen problem.
Click to expand...
Click to collapse
I've had to do that with the pen. I found I must remove the battery for about a minute, then reinsert. Less than a minute it doesn't reset.
http://www.eforcity.com/psamglxtlc06.html
I was wondering for anyone that have the black version of this case, does the flaps have magnets in them? It's listed for the other colors but not for the black. I found this kind of strange so I emailed them and it seems like they take forever to respond. So if anyone have this case, could you please comment? Thank you.
P.S. I'll also take recommendations for similar cases.
cellphoner2006 said:
http://www.eforcity.com/psamglxtlc06.html
I was wondering for anyone that have the black version of this case, does the flaps have magnets in them? It's listed for the other colors but not for the black. I found this kind of strange so I emailed them and it seems like they take forever to respond. So if anyone have this case, could you please comment? Thank you.
P.S. I'll also take recommendations for similar cases.
Click to expand...
Click to collapse
I don;t have this case, but many similar cases have magnetic closures. Why do you care?
A colleague of mine has the iPad version of this case, it's not bad for $10. I just ordered the Tab 2 7" version - I'll post my thoughts once received...
DigitalMD said:
I don;t have this case, but many similar cases have magnetic closures. Why do you care?
Click to expand...
Click to collapse
This has to be the dumbest question ever "Why do you care?". The guy is obviously asking so that he can make a smart purchase than going in blind and come to find out its not what he wanted and then having to return the item back. If you don't have any helpful advise to give why even comment? The nerve of some people!
rsage said:
A colleague of mine has the iPad version of this case, it's not bad for $10. I just ordered the Tab 2 7" version - I'll post my thoughts once received...
Click to expand...
Click to collapse
The case for my GTab 2 7" arrived yesterday. I'm used to rockin the tab "naked" but I'm liking the case. Nice and thin, magnets keep it closed nicely, all ports/buttons are available (including IR). Two little things... 1) It has a little loop for a pen or stylus which is annoying, I'll cut it off, and 2) the case doesn't lie perfectly flat against the tab in the area of the Samsung logo on the font of the tab, directly underneath the home/back buttons. A little annoying because when attempting to hit one of the buttons you first contact the case which is sticking up a bit.
asj2583 said:
This has to be the dumbest question ever "Why do you care?". The guy is obviously asking so that he can make a smart purchase than going in blind and come to find out its not what he wanted and then having to return the item back. If you don't have any helpful advise to give why even comment? The nerve of some people!
Click to expand...
Click to collapse
You're a jerk.
Some people has asked if the magnets have adverse effects on the devices, which they do not.
DigitalMD said:
You're a jerk.
Some people has asked if the magnets have adverse effects on the devices, which they do not.
Click to expand...
Click to collapse
Im a jerk? Come on man, think about your answer. If anything you came off being rude. You cant assume that all of these case with flaps have magnets as i have seen some with velcro and why tell the dude why does he care when he's asking for a reason. SMDH....
It took them days to reply but they finally gave me an answer. They say that it doesnt come with magnets so i bought a similar one but there's no cutout for the charging port(but in their pictures it did). Oh well and thank you for all the responses, much appreciated.
P.S. I care if they have magnets or not because it's more secure when my tablet drops than having the front part flap around on it's way down.
rsage said:
The case for my GTab 2 7" arrived yesterday. I'm used to rockin the tab "naked" but I'm liking the case. Nice and thin, magnets keep it closed nicely, all ports/buttons are available (including IR). Two little things... 1) It has a little loop for a pen or stylus which is annoying, I'll cut it off, and 2) the case doesn't lie perfectly flat against the tab in the area of the Samsung logo on the font of the tab, directly underneath the home/back buttons. A little annoying because when attempting to hit one of the buttons you first contact the case which is sticking up a bit.
Click to expand...
Click to collapse
Ya mines kinda did this too so i folded up some paper and stuck it between the tablet and the case. It's a bit more aligned now
cellphoner2006 said:
It took them days to reply but they finally gave me an answer. They say that it doesnt come with magnets so i bought a similar one but there's no cutout for the charging port(but in their pictures it did). Oh well and thank you for all the responses, much appreciated.
P.S. I care if they have magnets or not because it's more secure when my tablet drops than having the front part flap around on it's way down.
Click to expand...
Click to collapse
Ummm, that's strange, I got the 7" version of the same case and it does indeed have magnets to keep it closed...
---------- Post added at 07:08 PM ---------- Previous post was at 07:06 PM ----------
cellphoner2006 said:
Ya mines kinda did this too so i folded up some paper and stuck it between the tablet and the case. It's a bit more aligned now
Click to expand...
Click to collapse
Where exactly, underneath the little flaps that are sticking up, or between the back of the tablet and the case?
rsage said:
Where exactly, underneath the little flaps that are sticking up, or between the back of the tablet and the case?
Click to expand...
Click to collapse
I took a picture of it for you not sure if that helps. The white you see by my finger is the paper i push into that spot. I believe it's the little flaps your talking about.
Just to add, or help someone else, I have this case. I like it for the price, and it leaves the face open.
http://www.ebay.com/itm/Black-Slim-...es_Covers_Keyboard_Folios&hash=item2a25d206a5
It leaves all the ports and camera unobstructed. It's good for watching, but it is not "locked" into position, so tapping too hard on the screen will cause it to collapse flat. Only drawback.
I opened my Prime to try and improve my wifi, and now there's a gap between the glass and outer shell, right near the power button. When I put it back together, I made sure I started at the top, and worked my way around the rest of the glass. Any suggestions on how Ican get rid of the gap?
lennie paz said:
I opened my Prime to try and improve my wifi, and now there's a gap between the glass and outer shell, right near the power button. When I put it back together, I made sure I started at the top, and worked my way around the rest of the glass. Any suggestions on how Ican get rid of the gap?
Click to expand...
Click to collapse
Really could use a pic to give useful advice.
Take it back apart and find out whats wrong.
and don't ask questions in this section
Glebun said:
and don't ask questions in this section
Click to expand...
Click to collapse
What? Then what section do I ask a question?
lennie paz said:
What? Then what section do I ask a question?
Click to expand...
Click to collapse
the one it's in right now. you posted it in General
Glebun said:
the one it's in right now. you posted it in General
Click to expand...
Click to collapse
Oh, my bad. I thought I did post it in this section. Brain cramp.
You have to make sure the top edge is really snug before closing it up. It has a tendency to open up if not correctly pushed in.
When mine came back from RMA it was like that.
It can also be that the glass is coming away from its backing and the seal slides back and under the glass creating the illusion of a gap. Again this was present when mine returned from RMA. To fix this you need to push the glass back down to force the seal forward and closing up the gap. Then carefully heat the top edge of the screen with a hairdryer or heat gun. I think the ideal temperature is 70c. Then apply pressure to the screen edge until it has cooled. This fixed mine perfectly.
Sent from my HTC One using Tapatalk 2
I took a real good look at the clip that's in the spot where it's separated, and it has a crack in it, so that's why it won't clip.
http://www.amazon.com/rooCASE-Samsung-Galaxy-12-2-Note/dp/B00IB3QJVC/ref=pd_rhf_gw_p_d_1
Just an FYI if anyone interested. I usually go with the official Sammy case but decided to try this one this time. Should have mine in a few days.
tonyz3 said:
http://www.amazon.com/rooCASE-Samsung-Galaxy-12-2-Note/dp/B00IB3QJVC/ref=pd_rhf_gw_p_d_1
Just an FYI if anyone interested. I usually go with the official Sammy case but decided to try this one this time. Should have mine in a few days.
Click to expand...
Click to collapse
I still need to get a case, please review it once it comes in. Thanks
No white...What were they thinking?
I'm still using my cheap WAWO as I have yet to find a better alternative.
Mike02z said:
No white...What were they thinking?
I'm still using my cheap WAWO as I have yet to find a better alternative.
Click to expand...
Click to collapse
yep I need white but settled on the black
tonyz3 said:
I usually go with the official Sammy case but decided to try this one this time.
Click to expand...
Click to collapse
Be glad you avoided the Sammy case, nothing but issues with the magnets turning the note off when the cover is folded back over.
tonyz3 said:
http://www.amazon.com/rooCASE-Samsung-Galaxy-12-2-Note/dp/B00IB3QJVC/ref=pd_rhf_gw_p_d_1
Just an FYI if anyone interested. I usually go with the official Sammy case but decided to try this one this time. Should have mine in a few days.
Click to expand...
Click to collapse
ordered today, paid $3.99 for 1 day shipping to get it tomorrow. premier member here.
thanks!
Just received mine a few mins ago. Definitely like this alot more than the official Sammy cover. Not too heavy or thick and the magnetic auto on/off works without issue. I was concerned that the size of the tablet may not work well with the folded positions in landscape or portrait, but i am happy to report they are very stable in either position. I will have pix up shortly. At half the price of the official Sammy case it is worth every half penny...
Update-wanted to add i have no issue with the magnets when the cover is folded back..does not turn off or on..
tonyz3 said:
Just received mine a few mins ago. Definitely like this alot more than the official Sammy cover. Not too heavy or thick and the magnetic auto on/off works without issue. I was concerned that the size of the tablet may not work well with the folded positions in landscape or portrait, but i am happy to report they are very stable in either position. I will have pix up shortly. At half the price of the official Sammy case it is worth every half penny...
Click to expand...
Click to collapse
is the front cover has mold to the home button? i guess i can live with the cutout on the pen.. i have tab pro
ad78 said:
is the front cover has mold to the home button?
Click to expand...
Click to collapse
What?? Plz clarify what you are asking.....
tonyz3 said:
What?? Plz clarify what you are asking.....
Click to expand...
Click to collapse
The flap, when you close it hitting the home button. The oem has this mold to prevent hitting the home button
ad78 said:
The flap, when you close it hitting the home button. The oem has this mold to prevent hitting the home button
Click to expand...
Click to collapse
OK got ya... yep i can see that happening with this case. i will test it this evening and report back.
Edit- after checking you really need to purposely squeeze it for it to work. I also this with a screen protector around the button it will even less likely hit it. The mime glass one i have on order should be enough.
Here is a pretty cool slim case option. http://www.casefanatic.com/samsung-...over-baseus-galaxy-note-pro-12-2-smart-cover/
I have the blue one at home now, unfortunately the mailman came late today. So will not be able to test it out much till 2 am!
The case has a nice rubber felling to it, i thought it would be more of a leather feel. This rubber feeling, i like more than the leather. All ports are easily accessed adn the secondary mic is open as well. It feels sturdy in each standing position, does not feel like it will fall to easily. did not expect the sides to be so open though. I baby my tablet, so not an issue for me. Over all, very happy with this case and would buy more from them
Sent from my SM-P900 using XDA Premium 4 mobile app
tonyz3 said:
Here is a pretty cool slim case option. http://www.casefanatic.com/samsung-...over-baseus-galaxy-note-pro-12-2-smart-cover/
Click to expand...
Click to collapse
I was looking at that too.... looks nice and slim!
Sent from my SM-P900 using Tapatalk
mine is going back unfortunately, i hate the flap keeps on opening when holding due to those ridges. and big issue is the home button keep getting pressed. i have to disable S Voice, that's the only solution. its heavy and needs some improvement.
i bought the slimline and will receive it tomorrow.
ad78 said:
mine is going back unfortunately, i hate the flap keeps on opening when holding due to those ridges. and big issue is the home button keep getting pressed. i have to disable S Voice, that's the only solution. its heavy and needs some improvement.
i bought the slimline and will receive it tomorrow.
Click to expand...
Click to collapse
Please let us know how you compare the Poetic to the RooCase. About to buy a Note Pro and want something very slender but quality feeling.
What do you mean when you said the flap keeps opening because of the ridges?
Thanks