Opened prime,gap on top - Asus Eee Pad Transformer Prime

I opened my Prime to try and improve my wifi, and now there's a gap between the glass and outer shell, right near the power button. When I put it back together, I made sure I started at the top, and worked my way around the rest of the glass. Any suggestions on how Ican get rid of the gap?

lennie paz said:
I opened my Prime to try and improve my wifi, and now there's a gap between the glass and outer shell, right near the power button. When I put it back together, I made sure I started at the top, and worked my way around the rest of the glass. Any suggestions on how Ican get rid of the gap?
Click to expand...
Click to collapse
Really could use a pic to give useful advice.

Take it back apart and find out whats wrong.

and don't ask questions in this section

Glebun said:
and don't ask questions in this section
Click to expand...
Click to collapse
What? Then what section do I ask a question?

lennie paz said:
What? Then what section do I ask a question?
Click to expand...
Click to collapse
the one it's in right now. you posted it in General

Glebun said:
the one it's in right now. you posted it in General
Click to expand...
Click to collapse
Oh, my bad. I thought I did post it in this section. Brain cramp.

You have to make sure the top edge is really snug before closing it up. It has a tendency to open up if not correctly pushed in.
When mine came back from RMA it was like that.
It can also be that the glass is coming away from its backing and the seal slides back and under the glass creating the illusion of a gap. Again this was present when mine returned from RMA. To fix this you need to push the glass back down to force the seal forward and closing up the gap. Then carefully heat the top edge of the screen with a hairdryer or heat gun. I think the ideal temperature is 70c. Then apply pressure to the screen edge until it has cooled. This fixed mine perfectly.
Sent from my HTC One using Tapatalk 2

I took a real good look at the clip that's in the spot where it's separated, and it has a crack in it, so that's why it won't clip.

Related

[Q] Cellphone charm/strap?

Is there any place to attach a phone charm? I couldn't find any.
darkmush said:
Is there any place to attach a phone charm? I couldn't find any.
Click to expand...
Click to collapse
You could probably drill a couple tiny holes at one of the bottom corners of the back plate and run it through there. The under casing in those areas look well closed off.
live4nyy said:
You could probably drill a couple tiny holes at one of the bottom corners of the back plate and run it through there. The under casing in those areas look well closed off.
Click to expand...
Click to collapse
You can buy a case and drill a hole through it instead. I think it's easier with one of the TPU cases.
I'm thinking of doing something like that

[GUIDE] Replacing the bottom cover of your Xperia S

Hey guys,
I wrote this in the Q&A section and I think this could be interesting for some of you..
If your bottom cover is broken or makes some stupid noises you can simply replace it.. You can buy replacement covers at ebay and also other sites, for example:
http://sparepart.dk/en/sony-sony-ericsson-1629/sony-xperia-s-100338/spare-parts-100339/
http://www.ebay.com/itm/Original-Bu...T26i-SO-02D-/170872807890?var=#ht_4332wt_1163
http://www.handyersatzteilshop.de/a...+Cover+black+Sony+XPERIA+S+LT26i_3409642.html (german site)
To replace the bottom cover you have to follow these steps:
1. Pull the bottom cover a bit so that there is a little gap between the transparent strip and the cover.
2. Unlock the clips with your fingernails or a guiter pick.. Try to keep pulling the cover while you do this
3. Go all the way around until all the clips are unlocked.. Start at front left or right side
4. The replacement cover can be simply attached by pushing it over the naked end of the phone
See my attached pictures below
Good luck
MisterG
ps: for best results use a light guitar pick (mine was 0.60mm)
Really needed this guide. Pretty much made my bottom cap ugly when it fell and now there's a nasty bump on the edge. This should help. Though do you think the prices for the bottom cap will come down significantly? If it won't, I will be highly inclined to buy it now though it seems a bit on the costly side.
I don't know.. You're right - it's just a small piece of plastic but there's a xperia logo on it so it costs what it costs Maybe there are some non original covers but I haven't seen any yet..
mister-g1 said:
I don't know.. You're right - it's just a small piece of plastic but there's a xperia logo on it so it costs what it costs Maybe there are some non original covers but I haven't seen any yet..
Click to expand...
Click to collapse
Would be nice if more colours was available.
Sufficient unto the day is the evil thereof.
I want to replace mine, but the reason isn't so bad so I can hold off until more parts become available...
How hard to you have to pull the cap to make a gap? Quite a lot of force? because that is the part that scares me the most, haha pulling apart by baby :fingers-crossed:
Don't pull too hard The cover doesn't move very much anyway.. You only have to get a small gap to put something into, like a guitar pick (or any other flexible piece of something) Without pulling I wasn't able to get my pick placed, so if you do: well done
strongful said:
Would be nice if more colours was available.
Click to expand...
Click to collapse
Pull your cover off, grab a spray can in your favorite color and spray it Just joking - don't blame me if something goes wrong^^ Seriously: I don't think that there will be other colors than black and white in the future
Thanks Much needed guide for because of my clumsy girlfriend.
Thanks for the guide!
Just to be precise, there are only 2 clips on the front. The middle one looks like a guide, it's definitely not a clip
Cheers
I just received my cover from spareparts.
I had to wait 2 weeks because they didn't have stock but once they did, it took about 3 days to arrive to Canada where I live.
The cover feels and looks the same so that's a relief.
I dropped my phone and it cracked so I had to get a new one.
Cheers!
Hi does anyone know where to get a replacement part for the upper side (which involves both sides of the phone as well) I accidentally dropped it and know one corner is seriously damage PLEASE HELP!!!
Thanks
Sent from my XPERIA S using XDA app
tel033 said:
Hi does anyone know where to get a replacement part for the upper side (which involves both sides of the phone as well) I accidentally dropped it and know one corner is seriously damage PLEASE HELP!!!
Thanks
Sent from my XPERIA S using XDA app
Click to expand...
Click to collapse
You will get full housings on eBay but I guess you better take that to the service center as the display is fixed with the upper panel so repairing it by yourself could see you playing with fire with a delicate device. Sounds nasty though
What happens is that theres no Sony official center in my country so I don't know what to do is real ugly really? I think there's just really tight cause I saw a video where they show the battery and so
Sent from my XPERIA S using XDA app
I could remove the cover using my nails (and they are not very long...) - no need for a guitar pick...
Sent from my LT26i using xda app-developers app
Yeah, I already mentioned that it's possible to use your fingernails.. Advantage of a guiter pick is that it can be left sticked in while turning the phone freely if you have to alter your hand's position
mister-g1 said:
2. Unlock the clips with your fingernails or a guiter pick..
Click to expand...
Click to collapse
adam1000rr said:
Thanks for the guide!
Just to be precise, there are only 2 clips on the front. The middle one looks like a guide, it's definitely not a clip
Cheers
Click to expand...
Click to collapse
Okay, maybe you're right but also a guide acts like a clip while other clips are clipped
tel033 said:
Hi does anyone know where to get a replacement part for the upper side (which involves both sides of the phone as well) I accidentally dropped it and know one corner is seriously damage PLEASE HELP!!!
Thanks
Sent from my XPERIA S using XDA app
Click to expand...
Click to collapse
Check the links in my first post... There is also this website http://sparepart.dk/en/sony-sony-ericsson-1629/sony-xperia-s-100338/spare-parts-100339/ where you can get nearly everything..
By the way.. Maybe we can attach new colored bottom covers soon when the xperia sl is released.. This model is meant to be a refresh of our XS with some slightly changed hardware specs but the size should be equal.. So next time purple/blue or pink bottom cover?^^
Source: http://www.xperiablog.net/2012/07/13/is-this-the-sony-xperia-sl-xperia-s-refresh/
ps: don't take this too serious the images were reported to be fake
can i remove the cover and put it back again?
mine just make some noise...
Nice one, just put an order in for a replacement, gonna spray it a custom colour
Thank you for this guide. I dropped my phone and the only scratch was on the bottom right corner - it was driving me crazy. I got the part quickly from sparepart.dk even though I'm in California and they ship from Denmark. Phone looks like the day I got it.
Nice to hear that I could help you
tel033 said:
Hi does anyone know where to get a replacement part for the upper side (which involves both sides of the phone as well) I accidentally dropped it and know one corner is seriously damage PLEASE HELP!!!
Thanks
Sent from my XPERIA S using XDA app
Click to expand...
Click to collapse
I dont know where you can get that, but I have included the complete XS repair and replacement guide which I think you may need.

Glass Replacement

So, I see only one other thread about this, but I dropped my phone (Clumsy me left it on a chair, it slid off, and spider webbed my phone(SUCH a short distance)) But, I've bought the replacement part myself, and I plan on doing the repair myself. Is there anything I should know before I actually do this? Has total disassemble of the phone been done before?
Not to hijack your thread, but it drives me nuts how my LGOG seems to seek out-on its own-a way to dive off my coffee table/sofa/end table...no matter how flat and non inclined I sit it two seconds later and...CRASH! floor time...luckily mine has been taking it ok. So I feel your pain, and hope you get the help you seek.
Sent from my LG-E970 using xda premium
bqd37340 said:
Not to hijack your thread, but it drives me nuts how my LGOG seems to seek out-on its own-a way to dive off my coffee table/sofa/end table...no matter how flat and non inclined I sit it two seconds later and...CRASH! floor time...luckily mine has been taking it ok. So I feel your pain, and hope you get the help you seek.
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
I even know your feeling -.- I've never dropped it before though, that was my first time, mostly because I treat my phones like its my second life, and because theyre expensive. This phone dropped literally a foot and webbed, I was so mad
Dr Protostar said:
I even know your feeling -.- I've never dropped it before though, that was my first time, mostly because I treat my phones like its my second life, and because theyre expensive. This phone dropped literally a foot and webbed, I was so mad
Click to expand...
Click to collapse
Found this video off a quick google search...
jtsurfs said:
Found this off a quick google search...
Click to expand...
Click to collapse
I've seen that video, but it doesn't really show how to put the replacement back in, if you use glue, what type of glue, or how much heat is required and all that such
Dr Protostar said:
I've seen that video, but it doesn't really show how to put the replacement back in, if you use glue, what type of glue, or how much heat is required and all that such
Click to expand...
Click to collapse
I replaced the digitizer on an HTC Vivid and used 3m double sided tape and doubled that up so the screen wasn't directly on top of the lcd. The video for that one recommended doing that to keep some weird effects on the screen.
given heisbig
jtsurfs said:
I replaced the digitizer on an HTC Vivid and used 3m double sided tape and doubled that up so the screen wasn't directly on top of the lcd. The video for that one recommended doing that to keep some weird effects on the screen.
Click to expand...
Click to collapse
Whats the youtube vid name?
Maybe try some silicone glue
Maybe try some of the silicone seal (blue silicone glue) to attach it. If nothing else you might try some electronic stores (specialty or other Cell phone repair stores) for the glue that is needed. I would opt for something that isn't so hard on stuck and maybe go for something that holds tight and seals well but doesn't make it damn near impossible.

[Q]anybody try to take off the factory film on Z ultra?

I'm taking off the film right now but it look like there is no film on the front....
I need little help here
Dude, WTF!
Just kidding. Yes, there's a film on the front. It's just really really glued on there. There's a whole thread with annoyed people trying to get it off. It's here in the Q&A section. You'll need a razor and a heat source (not a flamethrower) if i remember correctly.
EDIT: Here it is.
soonpark said:
I'm taking off the film right now but it look like there is no film on the front....
I need little help here
Click to expand...
Click to collapse
I've heard that some SIMTEX appropriately placed will get that protect off quick smart... :cyclops:
LordManhattan said:
Dude, WTF!
Just kidding. Yes, there's a film on the front. It's just really really glued on there. There's a whole thread with annoyed people trying to get it off. It's here in the Q&A section. You'll need a razor and a heat source (not a flamethrower) if i remember correctly.
EDIT: Here it is.
Click to expand...
Click to collapse
hamdogg said:
I've heard that some SIMTEX appropriately placed will get that protect off quick smart... :cyclops:
Click to expand...
Click to collapse
Thank you for all information guys
see what I did with your help
hamdogg said:
I've heard that some SIMTEX appropriately placed will get that protect off quick smart... :cyclops:
Click to expand...
Click to collapse
can u elaborate as i did not understand what u mean
hykhleif said:
can u elaborate as i did not understand what u mean
Click to expand...
Click to collapse
was being funny... SIMTEX (plastic explosives)
hamdogg said:
was being funny... SIMTEX (plastic explosives)
Click to expand...
Click to collapse
It actually worked out well lol
I was impressed by toughness of the non-shatter proof glass
Can you share how did you take it off and clean it after
Sent from my C6833 using xda app-developers app
angel.grin said:
Can you share how did you take it off and clean it after
Sent from my C6833 using xda app-developers app
Click to expand...
Click to collapse
I didn't take the progress pictures of it so I'm just gonna explain.
First, you need hair dryer and razor blade. heat you ZU about 10 to 15 sec with hot air and start to take it off.
this film is very odd it is not gonna peel off, instead, it is gonna break in piece( very odd material...)
it will take about an hour.
after you've done take off the file, you will see massive amount of adhesive on the screen.
I used acetone to remove the adhesive.
I might post about how to take off the z ultra film soon since it looks bit brief (I don't have enough time right now )
Awesome job. Did you get a glass protector to replace it?
ಠ_ಠ
On mobile....
soonpark said:
I didn't take the progress pictures of it so I'm just gonna explain.
First, you need hair dryer and razor blade. heat you ZU about 10 to 15 sec with hot air and start to take it off.
this film is very odd it is not gonna peel off, instead, it is gonna break in piece( very odd material...)
it will take about an hour.
after you've done take off the file, you will see massive amount of adhesive on the screen.
I used acetone to remove the adhesive.
I might post about how to take off the z ultra film soon since it looks bit brief (I don't have enough time right now )
Click to expand...
Click to collapse
Wow. Just Wow.
I got about 1/10th of the way through. Darn it all! Can't go back now.
I started this assuming this wasn't going to take an hour. It did. Sharp, sharp razor. Lots of pushing around and post removal of the film, a little more razor. NO scratches. No divets. Wonderful.
The results (contrast the back with the smudgy and gashed - small lines) with the front and it's night and day.
I'll leave the back alone but I'm very satisfied with my even more gorgeous viewing surface. Not my favorite way to spend a mid-afternoon, but it worked.

Camera lens obstruction under glass

Never seen or heard of this before, but this happened to me. See attached image. What is this thing? It doesn't move when I tap the phone against something. Pictures are obviously crap. Is my next move removing the back cover to get rid of this thing?
Phone is less than 1 year old, but I don't think I can get warranty service as I bought it in the US as the international "no warranty" version from Amazon.
Info
camaro322hp said:
Never seen or heard of this before, but this happened to me. See attached image. What is this thing? It doesn't move when I tap the phone against something. Pictures are obviously crap. Is my next move removing the back cover to get rid of this thing?
Phone is less than 1 year old, but I don't think I can get warranty service as I bought it in the US as the international "no warranty" version from Amazon.
Click to expand...
Click to collapse
it is faulty hardware send it for replacement
Good Luck
:good:
I got a hair dryer and guitar pick and pulled the back cover off just enough to get the debris out. It appears to be a stray bit of adhesive or sealing tape around the camera lens. All good now, except my phone is probably no longer waterproof.
camaro322hp said:
I got a hair dryer and guitar pick and pulled the back cover off just enough to get the debris out. It appears to be a stray bit of adhesive or sealing tape around the camera lens. All good now, except my phone is probably no longer waterproof.
Click to expand...
Click to collapse
Did you re use the stock adhesive?
civicsr2cool said:
Did you re use the stock adhesive?
Click to expand...
Click to collapse
Yes. I didn't pull off the entire back cover, only pulled up the corner where the camera is. I suppose I could buy a new back with fresh adhesive to try and make it waterproof again, but I'm not sure how successful that would be.
camaro322hp said:
Yes. I didn't pull off the entire back cover, only pulled up the corner where the camera is. I suppose I could buy a new back with fresh adhesive to try and make it waterproof again, but I'm not sure how successful that would be.
Click to expand...
Click to collapse
Gotcha. I'm just curious because I'd like to sand down and buff out a clear back for mine. I think it'd be pretty neat.
civicsr2cool said:
Gotcha. I'm just curious because I'd like to sand down and buff out a clear back for mine. I think it'd be pretty neat.
Click to expand...
Click to collapse
That does sound cool. Show us some pics if you manage to do it.

Categories

Resources