[Q] help me - Galaxy S II Q&A, Help & Troubleshooting

hey frnds am using samsung galaxy s2 i9100...i am new to all this so i tried rooting my phone fallowing steps from a website i did it successfully but i am getting an yellow triangle at the start up and my samsung kies don't discover my phone...pls help me out....cos the phone is a gift from my dad so i don't want to brick it...pls help me

93.goutham said:
hey frnds am using samsung galaxy s2 i9100...i am new to all this so i tried rooting my phone fallowing steps from a website i did it successfully but i am getting an yellow triangle at the start up and my samsung kies don't discover my phone...pls help me out....cos the phone is a gift from my dad so i don't want to brick it...pls help me
Click to expand...
Click to collapse
use triangle away app and dont worry mate. only thing you need read >>>> learn>>>> and then implement...:good:

93.goutham said:
hey frnds am using samsung galaxy s2 i9100...i am new to all this so i tried rooting my phone fallowing steps from a website i did it successfully but i am getting an yellow triangle at the start up and my samsung kies don't discover my phone...pls help me out....cos the phone is a gift from my dad so i don't want to brick it...pls help me
Click to expand...
Click to collapse
Firstly some advice.. You need to use proper topic titles that briefly describe your topic, not silly generic meaningless ones like "help me".
The yellow triangle is normal as it means you have flashed new kernel. It can be removed by using "Triangle Away" app. You would have known this if you had used a simple search for "yellow triangle" on this forum. In future use search.
You cant use kies unless you have stock kernel/rom as far as I know.
"bricking" a device has nothing to do with yellow triangle or lack of kies connection. A bricked device is when it wont power on or you cant flash via recovery/download modes. This is caused if you wipe data/factory reset using stock recovery on Samsung/Android 4.0.4 or if you corrupt bootloader via a bad flash in ODIN or if battery runs out during flash etc.

Related

I installed xxKi3 and now my galaxy s2 not booting

hey I know there has been many threads about this but my case is unique and believe me i spent more than 6 hours searching the forums for a fix but no luck
I have a brand new Samsung Galaxy S2...tried to root it and it is stuck on boot loop
so i tried the steps written on the thread (do not post a new thread) but it is not working because i can not get inot recovery mode at all
I installed a stock xxki3 and still I can not fix the problem...
please help me
Can you post your device info.
Eg: I9100 international version
Sent from my GT-I9100 using XDA App
Yep, you're truly unique
Why not start with telling us your exact product and what happens when trying to get into both recovery and download modes.
my device is I9100 middle east version
it says when i remove the battery MODEL: GT-I9100G
problem description:
I turned on the device as soon as i bought it and it said 2.3.4
so I downloaded everything needed to root it and i started odien and everything went well....except for the fact that my galaxy got stuck with galaxy s logo screen and big yellow triangle at the bottom....and nothing else happen.... it says like this for hours and hours....
so i tried to go inot recovery mode...but nothing happens after doing the volume up+power+home ...still takes me to the previous screen with yellow triangle
tried download mode and it works fine....
i can go into download mode but not the recovery mode
please guys what do i do
mukalaaa said:
my device is I9100 middle east version
it says when i remove the battery MODEL: GT-I9100G
problem description:
I turned on the device as soon as i bought it and it said 2.3.4
so I downloaded everything needed to root it and i started odien and everything went well....except for the fact that my galaxy got stuck with galaxy s logo screen and big yellow triangle at the bottom....and nothing else happen.... it says like this for hours and hours....
so i tried to go inot recovery mode...but nothing happens after doing the volume up+power+home ...still takes me to the previous screen with yellow triangle
tried download mode and it works fine....
i can go into download mode but not the recovery mode
please guys what do i do
Click to expand...
Click to collapse
You need to download files to use for your specific phone and try again. You said you have a GT-I9100G, right? Well, where did you get the files you used to root?
You also said in the title of this post that you installed XXKI3. Well, installing XXKI3 and rooting are not the same thing. Which did you do? Root using an insecure kernel? Or install an XXKI3 firmware?
I'm going to go ahead and guess that you tried to flash a firmware intended for the regular GT-I9100, and not the GT-I9100G. These two phones have different hardware, so firmwares are NOT compatible.
Amirite?
first I tried to root it using insecure kernel...when it got stuck with galaxy s 2 logo screen with yellow triangle.... I searched all over the net for a solution and one of the solutions was is to flash xxki3 ....and I did that.... but it always fail.... I also tried to flash litening rom... but at the end...it fails at MODEM stage i believe....
Now all i want is to get my phone working....I dont wanna root it anymore....
please guys please help me
Stop flashing it.
You are doing more damage.
You have the 9100G, but you're flashing 9100 stuff
I am not flashing it anymore.... but I need a solution.... I want to know how can I get it back up and running
please help me
guys i found a 2.3.6 for my GT-i9100G
but still gives me fail red color in odien
please help me
You could try flashing this kernel.
http://forum.xda-developers.com/showthread.php?t=1369977
Sent from my GT-I9100 using XDA App
mukalaaa said:
guys i found a 2.3.6 for my GT-i9100G
but still gives me fail red color in odien
please help me
Click to expand...
Click to collapse
When you get the error, does it say failed red color? Of course not.
Tell us excactly the error you are getting! If you want our help give us all the information that you have.
What error message did you get? What are the steps you took?

[Q] Not sure if bricked or not.

So, I was trying to root my:
Samsung Galaxy S2
i9100g
(Not sure what Rom/ICS/Firmware it had before I tried rooting)
I tried flashing with Siyah Kernel to Root like I had previously done with another i9100, but in turn the S2 now sits at the black boot screen displaying "Samsung Galaxy S2 GT-i9100G" and will not go further.
I've read about 50 or so threads relating to the boot screen problem.
Yes, the device may reach Download mode, but not Recovery mode.
Any help would be extremely helpful.
Thank you.
DanielHunter said:
So, I was trying to root my:
Samsung Galaxy S2
i9100g
(Not sure what Rom/ICS/Firmware it had before I tried rooting)
I tried flashing with Siyah Kernel to Root like I had previously done with another i9100, but in turn the S2 now sits at the black boot screen displaying "Samsung Galaxy S2 GT-i9100G" and will not go further.
I've read about 50 or so threads relating to the boot screen problem.
Yes, the device may reach Download mode, but not Recovery mode.
Any help would be extremely helpful.
Thank you.
Click to expand...
Click to collapse
Hey dude, in the first place u have flashed a wrong kernel on ur I9100G, since siyah doesnt support that model due to difference in hardware alltogether compared to I9100 international and its variants M/P/T.
Ur lucky since ur phone is able to go to Dwnld mode.
Just dwnld a stock firmware meant for I9100G ( u can dwnld the same from www.sammobile.com) and flash the same from Pc Odin to boot ur phone Normally and then try the link below to have a proper root of ur phone
http://forum.xda-developers.com/showthread.php?t=1587482
Ps- in the future be carefull while flashing things on ur phone, read before proceeding else u will have an expensive piece of Paper weight with u
DanielHunter said:
So, I was trying to root my:
Samsung Galaxy S2
i9100g
(Not sure what Rom/ICS/Firmware it had before I tried rooting)
I tried flashing with Siyah Kernel to Root like I had previously done with another i9100, but in turn the S2 now sits at the black boot screen displaying "Samsung Galaxy S2 GT-i9100G" and will not go further.
I've read about 50 or so threads relating to the boot screen problem.
Yes, the device may reach Download mode, but not Recovery mode.
Any help would be extremely helpful.
Thank you.
Click to expand...
Click to collapse
As long as you can get to download mode, you're alright.
check this out.
Also remember that you are on 9100G so this thread might help you out.
Thank you both so very much.
Trying official firmware for my device.
Glad you pulled it off.
I don't know what to put here...any ideas?
thanxs
:good: thanxs for the solutions,..it help me so much,... thank you once more from me,... :good:

Soft briked or hard briked

Hi all.
I have already posted my problem in this thread which I have read to the end ( [GUIDE] Fix an unflashable or soft bricked I9100G )
but was not able to get any solution so I'm starting a new thread hopefully someone might be able to help me and sorry if I was not suppose to start a new thread.
My problem is as follows and hope that someone can help.
I have downloaded odin mobile and installed it on my S2 I9100 G which previously had CM 10 installed on it and I wanted to flash the official firmware using Odin mobile. I did run it and then the phone prompted me for M5 or Md5 that was detected and should click yes to verify before flashing. I clicked yes then it started verifying and when it was done it rebooted and then was stuck on the (Samsung Galaxy S2 GT-19100G black screen) and did not want to move. I waited for an hour and a half and nothing happened. When I removed the battery (I could not reset or do anything else) and put it back, the phone turned on by itself and stayed still on the starting screen (Samsung Galaxy S2 GT-19100G black screen)
Now I'm not being able to put it in recovery nor download mode.
Can any one help and anyone knows if the jtag dongle can actually force it to go to download mode even at this stage
Thanks in advance for any suggestion
Ok thank you guys. I think I was able to fix it and revive my phone.
go to service centre they solve your problem
Sent from my GT-I9100G using xda premium
Make sure you got the right M.O kernel (I9100G).
Sent from the little guy

[Q] Samsung Galaxy Ace 2 Phone Rooting

Hello everyone
I am very new to this website as I just signed up and registered today. I am currently having a problem with my android phone, and I cant figure out how to resolve it.
The problem that I am having is that last week I was updating my phone when something in the device and caused my phone to become bricked. And after spending many hours on Youtube I finally found a video that helped me recover my phone by flashing the phones memory with clockworks recovery using odin and I was able to get my phone back up and working. But now whenever I turn my phone on I see the yellow triangle appear on bootup and I want to get rid of the triangle.
I downloaded the apk file for triangleaway but in order for me to be able to run it on my phone my phone needs to be rooted, and I have tried many ways to root my phone but it still says that my phone does not have root access.
My phone is a Samgung Galaxy Ace X II
Model Name GT-S7560M
Any help would be appreciated.
Thanks

Samsung galaxy m250k stuck on a yellow exclamation button...

I recently got a samsung galaxy 2 ( Model- m250k (korean) from my dad about three days ago..Because it's a korean model, I wanted to root it and remove all the korean apps. So, while rooting, I flashed jeboo_kernel_i9100_v1-2a as the insecure key instead of m250k's (my own model's insecure key) because I couldn't download it from hotfiles.. which in fact was the only site where it was.. and this website never worked/ webpage was unavailable...:cyclops:
After I rebooted my SG2 ,a yellow exclamation sign showed up and it didn't go away.. It appears beneath the Samsung galaxy logo and it never goes away,,,I have tried different methods already to solve it but it never goes away...
Will it go away if I use my m250k's (my own model's insecure key) and if so, where can I find the site to download it??? or Is there some other way to root it or bring everything back to normal--the way it was ?? I would really like to root but I don't seem to know the solution to it.. Should I take some technical assistance?
Please, help.. I don't wanna ruin my dad's gift either. . :crying:
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck

Categories

Resources