Hello guys. Yes i'm a noob and i have tried desperately to find the info out myself but i'm getting myself SO confused, i hope someone can help me out a bit and clarify a few things for me.
I have a SAMSUNG GALAXY ACE GT-S5830i which is a United Kingdom model phone unlocked to all networks but it was getting very worn and tatty so i went out this morning and purchased a brand new SAMSUNG GALAXY ACE GT-S5830i phone (identical model) however this one came supplied as locked to the o2 network and is o2 branded on all the startup/shutdown screens.
I figured i could simply re-flash a stock firmware to it to lose all of the o2 branding and return it to the standard Samsung startup/shutdown screens (and possibly unlock the phone to all networks during the process but i'm not that bothered about doing that as it doesn't really matter to me)
On the handsets I have gone into SETTINGS> ABOUT PHONE> and the details are as follows:
Model Number: GT-S5830i
Android Version: 2.3.6
Baseband Version: S5830iXXLK1
Kernel Version: 2.6.35.7 [email protected] #1
Build number: GINGERBREAD.XXLK3
...and these details are the same for both the old phone and the new o2 branded one.
Now then, here's where i'm at: when i do things i'm not only doing them to get to the 'end goal' but also to learn and educate myself along the way, but so much of the information out there assumes that you already know what they are talking about or is just too confusing as it doesn't explain enough. I have gotten myself very confused lol.
I want to be able to 'de-brand' the new phone so that it is just like the old one, and to do that i'd like to understand what i am doing a bit more, like the baseband version and build number (XXLK1 and XXLK3 are bpth quoted in the 'About Phone' menu) and i don't understand what file i should be downloading as all i can find is labelled as GT-S5830iXXLK3 so would this be the correct firmware for my handsets as i thought they were listed by Baseband (which is XXLK1 not XXLK3 but the bit in the phone's build number says XXLK3 even though the actual phone's Baseband says XXLK1) can you see why i am confused? lol!
I'd like to be as sure as i can be prior to flashing so i don't make any silly mistakes.
I have:
KIES software,
USB Drivers (i think)
ODIN v3.07 software,
Standard Samsung supplied USB cable,
Windows 7 32bit.
Can anyone help me to understand why the firmware sets are in several split files and help confirm which firmware i do actually need for the baseband type of my two handsets.
I'm also intending to make a backup of each phone prior to flashing so i hopefully do not brick any devices. Maybe i could even read the firmware of one phone and flash to the other? Perhaps i'll just stick to finding a suitable stock firmware and keep it simple
Any help, information, education is all appreciated, and i hope as a noob to the forum i haven't breached any set rules with this post (i don't think i have but you never know!)
Kindest regards,
Drew
United Kingdom.
DrewKrew said:
Hello guys. Yes i'm a noob and i have tried desperately to find the info out myself but i'm getting myself SO confused, i hope someone can help me out a bit and clarify a few things for me.
I have a SAMSUNG GALAXY ACE GT-S5830i which is a United Kingdom model phone unlocked to all networks but it was getting very worn and tatty so i went out this morning and purchased a brand new SAMSUNG GALAXY ACE GT-S5830i phone (identical model) however this one came supplied as locked to the o2 network and is o2 branded on all the startup/shutdown screens.
I figured i could simply re-flash a stock firmware to it to lose all of the o2 branding and return it to the standard Samsung startup/shutdown screens (and possibly unlock the phone to all networks during the process but i'm not that bothered about doing that as it doesn't really matter to me)
On the handsets I have gone into SETTINGS> ABOUT PHONE> and the details are as follows:
Model Number: GT-S5830i
Android Version: 2.3.6
Baseband Version: S5830iXXLK1
Kernel Version: 2.6.35.7 [email protected] #1
Build number: GINGERBREAD.XXLK3
...and these details are the same for both the old phone and the new o2 branded one.
Now then, here's where i'm at: when i do things i'm not only doing them to get to the 'end goal' but also to learn and educate myself along the way, but so much of the information out there assumes that you already know what they are talking about or is just too confusing as it doesn't explain enough. I have gotten myself very confused lol.
I want to be able to 'de-brand' the new phone so that it is just like the old one, and to do that i'd like to understand what i am doing a bit more, like the baseband version and build number (XXLK1 and XXLK3 are bpth quoted in the 'About Phone' menu) and i don't understand what file i should be downloading as all i can find is labelled as GT-S5830iXXLK3 so would this be the correct firmware for my handsets as i thought they were listed by Baseband (which is XXLK1 not XXLK3 but the bit in the phone's build number says XXLK3 even though the actual phone's Baseband says XXLK1) can you see why i am confused? lol!
I'd like to be as sure as i can be prior to flashing so i don't make any silly mistakes.
I have:
KIES software,
USB Drivers (i think)
ODIN v3.07 software,
Standard Samsung supplied USB cable,
Windows 7 32bit.
Can anyone help me to understand why the firmware sets are in several split files and help confirm which firmware i do actually need for the baseband type of my two handsets.
I'm also intending to make a backup of each phone prior to flashing so i hopefully do not brick any devices. Maybe i could even read the firmware of one phone and flash to the other? Perhaps i'll just stick to finding a suitable stock firmware and keep it simple
Any help, information, education is all appreciated, and i hope as a noob to the forum i haven't breached any set rules with this post (i don't think i have but you never know!)
Kindest regards,
Drew
United Kingdom.
Click to expand...
Click to collapse
read my thread or signature.
I have loaded KIES and got some more information:
On the older SAMSUNG GALAXY ACE GT-S5830i (unlocked to all networks) it says: PDA:LK3 / PHONE: LK1 / CSC: LK1 (BTU)
On the newer SAMSUNG GALAXY ACE GT-S5830i (locked and branded o2) it says: PDA:LK3 / PHONE: LK1 / CSC: LK1 (O2U)
So clearly i can see the difference here between the new phone with it's o2 network branded firmware, and assume that the only thing i need to change over on the new phone is the CSC part, which ODIN looks like it can do by simply adding a new CSC file in.
Anyway, i went to the SamMobile Firmware site and have downloaded:
GT-S5830i - United Kingdom - BTU
PDA: S5830IXXLK3
CSC: S5830IBTULK1
Version: 2.3.6
Date: 2012-11-23
...which gives me a zip file named: S5830IXXLK3_S5830IBTULK1_BTU.zip
Here's where i just got more confused lol... the thread you pointed me to gets a bit confusing as lots of people are posting allsorts on it, but am i right in thinking once i have that file i just downloaded i go into ODIN v3.07 and just add that file into the PDA section and then untick all the boxes? This seems a bit different to some of the other Odin instructions i have read where they say tick certain boexes and do this, do that etc...
This way seems to be involving reflashing the PDA, and PHONE sections maybe? Am i not just wanting to flash CSC parts? I am SO confused now.
Can anyone help clarify a little more? I can't quite see how you make a firmware backup using ODIN before proceeding to actual flashing. I'd like to make a backup first before i do anything
DrewKrew said:
I have loaded KIES and got some more information:
On the older SAMSUNG GALAXY ACE GT-S5830i (unlocked to all networks) it says: PDA:LK3 / PHONE: LK1 / CSC: LK1 (BTU)
On the newer SAMSUNG GALAXY ACE GT-S5830i (locked and branded o2) it says: PDA:LK3 / PHONE: LK1 / CSC: LK1 (O2U)
So clearly i can see the difference here between the new phone with it's o2 network branded firmware, and assume that the only thing i need to change over on the new phone is the CSC part, which ODIN looks like it can do by simply adding a new CSC file in.
Anyway, i went to the SamMobile Firmware site and have downloaded:
GT-S5830i - United Kingdom - BTU
PDA: S5830IXXLK3
CSC: S5830IBTULK1
Version: 2.3.6
Date: 2012-11-23
...which gives me a zip file named: S5830IXXLK3_S5830IBTULK1_BTU.zip
Here's where i just got more confused lol... the thread you pointed me to gets a bit confusing as lots of people are posting allsorts on it, but am i right in thinking once i have that file i just downloaded i go into ODIN v3.07 and just add that file into the PDA section and then untick all the boxes? This seems a bit different to some of the other Odin instructions i have read where they say tick certain boexes and do this, do that etc...
This way seems to be involving reflashing the PDA, and PHONE sections maybe? Am i not just wanting to flash CSC parts? I am SO confused now.
Can anyone help clarify a little more? I can't quite see how you make a firmware backup using ODIN before proceeding to actual flashing. I'd like to make a backup first before i do anything
Click to expand...
Click to collapse
Seeing that You except you are a noob
Well we all are noobs here
We just try to know more things
Well as your question is not a kind that other noobs post
And you also said that you searched before posting
So it's good for you
I want to tell you that in order to keep the General section clean
I have made a thread for questions
Any questions.
So, this time you are correct and these type of questions are welcomed.
But, next time if you have a question.
Please post in HELP THREAD
Stock..
ahhh horlicks, need to 10 posts to link out side of xda, grrrr.... PM me drew. I have the repack...
i think this is what your looking for, de-branded, (BTU) well branded to samsung anyway, stock firmware.
CSC, Modem and PDA repacked for odin.
CSC_S5830iXXLK3_S5830iBTULK1_S5830iXXLK
MODEM_S5830iXXLK3_S5830iBTULK1_S5830iXXLK1
PDA_S5830iXXLK3_S5830iBTULK1_S5830iXXLK1
Enjoy,
Sat1
hey
satelliteone said:
ahhh horlicks, need to 10 posts to link out side of xda, grrrr.... PM me drew. I have the repack...
i think this is what your looking for, de-branded, (BTU) well branded to samsung anyway, stock firmware.
CSC, Modem and PDA repacked for odin.
CSC_S5830iXXLK3_S5830iBTULK1_S5830iXXLK
MODEM_S5830iXXLK3_S5830iBTULK1_S5830iXXLK1
PDA_S5830iXXLK3_S5830iBTULK1_S5830iXXLK1
Enjoy,
Sat1
Click to expand...
Click to collapse
Hey pls pls pls could you send me link to this stock firmware I've been looking for hours and not found anything, Thanks!
bassjunkie223 said:
Hey pls pls pls could you send me link to this stock firmware I've been looking for hours and not found anything, Thanks!
Click to expand...
Click to collapse
here u go
http://forum.xda-developers.com/showthread.php?t=1971115
hey
js2892 said:
here u go
http://forum.xda-developers.com/showthread.php?t=1971115
Click to expand...
Click to collapse
sorry but which one should i use as theres no link for the UK one
bassjunkie223 said:
sorry but which one should i use as theres no link for the UK one
Click to expand...
Click to collapse
if you want only the UK one, search on sammobile.com, u might find it!
why do you want stock rom?
you could install firmwares of other countries but u "might" face network problems!
backup your imei via galaxy toolbox app if you do so!!
u could flash a custom rom!!
Related
Hi guys,
I just bought a Galaxy S2 and I want to flash a newer firmware.
The firmware I intend to flash (XXKG1) comes with PDA, MODEM and CSC.
Is it possible to flash just it's PDA part? Would there be any implications on that?
Why would I want that? Because the original firmware (Brazil - VIVO carrier) I could find only came with the PDA part. So if I flash CSC or MODEM, there is no way back.
The CSC is different from mine. Would that be a problem?
Thanks in advance
AFAIK the CSC is installed into the system partition, so even when you only flash the PDA part you're going to loose your current CSC setup.
However, if the FW comes as seperate .tar files you can just flash the PDA one, yes.
You can take care of a "way back" if you first install CF-Root for example and then do a backup from recovery mode.
Restoring that back gets you pretty close to "nothing ever happened" - it doesn't backup the moden though, only system and data.
Uhmm... weird, even on ODIN you have a separate button for the CSC.
What are the consequences of changing the CSC?
iury_simas said:
Uhmm... weird, even on ODIN you have a separate button for the CSC.
What are the consequences of changing the CSC?
Click to expand...
Click to collapse
As the above poster mentioned It really depends how the firmware is packaged
Intratech's firmware are packed in one TAR ( Pda/phone/csc ) is just one zip, which you put in the PDA section and it flashes all three of them within
If you get three seperate files then you put them in their corressponding order of ODIN
In this instance you can choose to keep your current CSC and not flash that one.
Although I am not sure if It has any effect between 2.3.3 and 2.3.4
Just to clarify CSC subject:
I live in Kazakhstan. My present setup (from *#1234#)
PDA: I9100XEKE2
Phone: I9100XXKDJ
CSC: I9100XEKE1
believe all available official samsung firmwares are issued do exist for different region(i.e. Kazakhstan is not included)
How safe is it to flash the 2.3.4 firmware now (KG2) ?
What can I possibly loose using the KG2 firmware from Samsung ? As u understand phone language is not a problem for me.....so wonder anything else I omit ?
Thanks for help
Sorry to bump in....
Hello, I am relatively new to forums, only discovered it since I got my galaxy s2, which was a month ago.
Anyways I have similar questions, and I read a bunch of topic which only made me even more confused about what to do, and didn't want to make a new thread so I bumped in here
If inappropriate, please ignore me.
Anyways, Ive got:
PDA: I9100XWKE1
PHONE: I9100XWKE1
CSC: I9100OJVKE1
It is an stock firmware, and I guess a ROM...
I want to update to 2.3.4 but waiting seems not to be a better side of me so I decided to do it manually.
My question is with what should I update with?
As far as I understand, latest official firmwares can be found in the Intratech's post ( the XXKG2 one ).
But I am worried about the CSC part, and how will it affect my phone?
As far as I understand CSC carries localization of a sort, for some network configuration, but my provider sends config messages, and only language I use in phone is English.
Will random CSC part affect me?
Can I even update from my current firmware to the latest one? or do I need to update to other one first?
Will update wipe my data? ( it seems no as far as I understood from guide )
Will the phone be full "stock" ( basically like I bought it with that firmware), and will I be able to update on later time with KIES ?
What kinda of problems (if any) might I expect with upgrading this way? ( if presumably I do everything as I should, i.e. as per guides )
Once again, I apologize for bumping this thread, and I thank you for any help you provide.
sader0 said:
Just to clarify CSC subject:
I live in Kazakhstan. My present setup (from *#1234#)
PDA: I9100XEKE2
Phone: I9100XXKDJ
CSC: I9100XEKE1
believe all available official samsung firmwares are issued do exist for different region(i.e. Kazakhstan is not included)
How safe is it to flash the 2.3.4 firmware now (KG2) ?
Safe as flashing any firmware .
What can I possibly loose using the KG2 firmware from Samsung ? As u understand phone language is not a problem for me.....so wonder anything else I omit ?
Flash it and see.
jje
Click to expand...
Click to collapse
Hi,
I've been looking around for a week already and can't figure this out, was wondering if anyone could give me some advice.
Im running Kies version 2.0.3.11082_152. When I plug my SGS2 it prompts and gets to back up as normal but on summary it doesnt show my Firmware information and when I check for update it is just blank.
PDA: BOKG2
Phone: BOKG1
CSC: TMUKF1
Im still running Gingerbread 2.3.3 on T-Mobile (UK) and was wondering how can I update my Firmware other than Odin.
I spoke to T-Mob and they asked me to contact Samsung who wants me to take the phone to one of their authorized services but I'm not looking for all this hassle and just wanna get to update as normal.
Any helpfull input is more than welcome, Im still learning the way of the device and its being my 2nd week of use.
Really appreciate the help!
Hold "home+power+volume up" and see if you can get into stock recovery mode.If you cant then you firmware is not properly flashed into you phone.Your verion is here on XDA so you could re-flash it,it would still be stock and Kies might then recognize it.Also updates are regional and carrier based so if your carrier doesnt have the latest above 2.3.3 then there wont be any update either.Looking at the carrier firmware list the firmware you have stated is the latest here on XDA for T-Mobile UK so its posible that there isnt any update yet.
Thanks for your reply.
I did manage to get on recovery mode and about the T-mob firmware, I cant confirm there is one available but I assume there should be something wrong for the fact that I cant check my firmware info on kies.
I 'll probably try to flash same rom on odin.
When I was checking the T-Mob roms here, I cant discern which version of firmware it is. The details about about PDA / Phone / CSC has anything with it? I mean, how do I find which is 2.3.3 from 2.3.4 if any.
Thanks again for helping understanding.
O_Kara said:
Thanks for your reply.
I did manage to get on recovery mode and about the T-mob firmware, I cant confirm there is one available but I assume there should be something wrong for the fact that I cant check my firmware info on kies.
I 'll probably try to flash same rom on odin.
When I was checking the T-Mob roms here, I cant discern which version of firmware it is. The details about about PDA / Phone / CSC has anything with it? I mean, how do I find which is 2.3.3 from 2.3.4 if any.
Thanks again for helping understanding.
Click to expand...
Click to collapse
Goto this link and get Odin v1.85 if you dont already have it
http://forum.xda-developers.com/showthread.php?t=1075278
You will see it almost right at the top where it says "FLASHING FIRMWARE WITH ODIN"
Then go to this one and scroll down to T-MOBILE and find UK.You will see the firmware you stated is the last on the list.This is because it hasnt been updated yet or there is no update.Anway,thats your download link.
http://forum.xda-developers.com/showthread.php?t=1113928
The first link explains it all.Odin is downloaded as a ZIP file.For the firmware when downloaded you just need to double click to get the extract menu.No Password.The firmware goes in PDA and without marking anything else hit the start button.That easy
EDIT:One more thing.Im one WIN7 and sometimes my antivirus gives a warning and gives the typicall red menu and all that.Dont worry its not a virus.Just hit the execute button or whatever yours shows and its all good.Its just the way your antivirus and firewalls are set to detect incoming stuff
O_Kara said:
I mean, how do I find which is 2.3.3 from 2.3.4.
Click to expand...
Click to collapse
cooza said:
Goto this link and get Odin v1.85 if you dont already have it
http://forum.xda-developers.com/showthread.php?t=1075278
You will see it almost right at the top where it says "FLASHING FIRMWARE WITH ODIN"
Then go to this one and scroll down to T-MOBILE and find UK.You will see the firmware you stated is the last on the list.This is because it hasnt been updated yet or there is no update.Anway,thats your download link.
http://forum.xda-developers.com/showthread.php?t=1113928
The first link explains it all.Odin is downloaded as a ZIP file.For the firmware when downloaded you just need to double click to get the extract menu.No Password.The firmware goes in PDA and without marking anything else hit the start button.That easy
EDIT:One more thing.Im one WIN7 and sometimes my antivirus gives a warning and gives the typicall red menu and all that.Dont worry its not a virus.Just hit the execute button or whatever yours shows and its all good.Its just the way your antivirus and firewalls are set to detect incoming stuff
Click to expand...
Click to collapse
Hi mate, I really appreciate your help! I did found those threads previously but as I stated before, I cant discern the difference from one firmware to the other. Its very noobish but I'm looking very much to learn.
This are the versions on the thread:
T-Mobile UK
BOKE3:http://www.multiupload.com/GY05UJM6DQ
Firmware info: PDA:BOKE3|PHONE:BOKD1|CSC:TMUKE3
BOKE3 Stock Kernel: http://www.multiupload.com/I41CAJ2BLS
Password: [email protected]
BOKF3:http://www.multiupload.com/15O4TE3FBT
Firmware info: PDA:BOKF3|PHONE:BOKF1|CSC:TMUKF1
BOKF3 Stock Kernel: http://www.multiupload.com/7EDUOBEYZW
Password: [email protected]
BOKG2:http://www.multiupload.com/VY5KOFVJHL
Firmware info: PDA:BOKG2|PHONE:BOKG1|CSC:TMUKF1
BOKG2 Stock Kernel: http://www.multiupload.com/TD5QBFPCIH
Password: [email protected]
I believe mine is the Firmware info: PDA:BOKG2|PHONE:BOKG1|CSC:TMUKF1 cause it matches mine so I assume its the version 2.3.3 but is there anyway of finding out from reading it? Like looking at those codes you know which version it is.
Sorry, I dont mean to be a pain for asking so much but I wish to understand how it is.
Also, I've spoken to samsung who confirmed T-Mob UK has version 2.3.4 for SGS2 available so I should be able to upgrade through Kies but Kies is rubbish and is stating my firmware as the latest.
I again appreciate all the help!
"androidforums.com/samsung-galaxy-s2-international/387520-understanding-csc-kernel-etc.html"
I found this thread on another forum which helped me to understand better what I was asking, I hope it can help more ppl as well.
Many thanks for all those that helped including the guys from "androidforums.com"
Also, I was rechecking the roms available and the one on my device is the latest listed on the branded firmwares, I wonder what would Samsung guys flash on my device if I take to their service centre, not looking for that anyway!
All the best!
PS: Cant post links yet, sorry for the mess.
Hello Peeps,
I have gone around in circles and lost myself
when I open the box for my new SG2, I wanted to root it
and I read all the forums about it
and my kernel was XXWKJ3
so I used that with Odin on the PDA
well it made my csc OXAKI3
well that is for Poland
and now that I wanted to get back to Factory Reset, I formatted the 16GB Internal Memory,
and used this
GT-I9100_XEN_I9100XWKJ3_I9100XENKJ1_I9100XXKI4.tar.md5
on PDA using Odin
well Now I think is in German , as it has 2 apps
DigiLezen & Samsung MMM
Version
PDA: I9100XWKJ3
PHONE: I9100XXKI4
CSC: I9100XENKJ1
MY SG2 IS UNBRANDED & UNLOCKED
I'M ON GIFFGAFF THAT RUNS ON O2 NETWORK, But for some reason I don't have in mobile networks option to select O2
can someone help choose the right PDA/PHONE/CSC
for this phone, the Stock Kernel & the Rooted Kernel
I been trying to work this out for 3 days now and still have not found a solution
Please help a Noob
thanks
Plutonian32 said:
can someone help choose the right PDA/PHONE/CSC
for this phone, the Stock Kernel & the Rooted Kernel
I been trying to work this out for 3 days now and still have not found a solution
Please help a Noob
thanks
Click to expand...
Click to collapse
Hopefully this helps.
You can get the stock firmware in this thread here.
For a beginner root kernal I would use the one available here.
Use odin to flash the kernal/firmware.
I been to both pages, and still can't figure out what is the right one, I read everything
can someone with giffgaff UK Please advice me off the right PDA/PHONE/CSC to put on my SG2, thanks
According to Intra's carrier branded firmware thread, latest firmware for O2/GiffGaff is KJ1.
Plutonian32 said:
I been to both pages, and still can't figure out what is the right one, I read everything
can someone with giffgaff UK Please advice me off the right PDA/PHONE/CSC to put on my SG2, thanks
Click to expand...
Click to collapse
will try the unbranded XWKJ1
see if that will work
if not will try the branded one
thanks
Stock O2 firmware from the provider roms thread will have the correct CSC for O2 .
Big question is why do you want to root ????
jje
Hi
I've been jailbreaking iphones since they came out but have switched to android now so I'm a noob again!
I bought a new S2 on ebay (sealed) but I'm not sure it's standard UK, I've attached 2 screen grabs.
Could someone please tell me if my phone is rooted? (the [email protected] is what got me thinking)
In case attachments don't work:
Kernel: 2.6.35.7-I9100XWKH1-CL431225 [email protected] #2
Also:
PDA: I9100XWKH1
PHONE: I9100XXKG5
CSC: I9100XEUKH1
And is it possible for me to ugrade to ICS?
I've tried researching here and other websites. Odin is clearly the way to go and I see lots of XXK** and other 5 digit codes which i guess are region/Firmware specific but mine don't seem to match any of these??
Any help much appreciated.
Pretty standard stuff. XEU stands for UK Unbranded. Firmware is an old one though. Follow links in my signature to proceed. ICS has been released though we are still waiting for a unbranded UK version. Enjoy.
Sent from my GT-I9100
Dell is the name of the system on which this kernel was made. It is currently not rooted.
Sent from my GT-I9100
Yeah, Linux formats things as "username"@"computer". Samsung just compile their kernels logged in as root.
Sent from my GT-I9100 using XDA
I looks like you have a standard build.
If you really want to check whether your phone is rooted or not, try downloading the "superuser" app from the market (sorry, "Google Play").
If your phone isn't rooted, it'll tell you.
dnesdlrow said:
Hi
I've been jailbreaking iphones since they came out but have switched to android now so I'm a noob again!
I bought a new S2 on ebay (sealed) but I'm not sure it's standard UK, I've attached 2 screen grabs.
Could someone please tell me if my phone is rooted? (the [email protected] is what got me thinking)
In case attachments don't work:
Kernel: 2.6.35.7-I9100XWKH1-CL431225 [email protected] #2
Also:
PDA: I9100XWKH1
PHONE: I9100XXKG5
CSC: I9100XEUKH1
And is it possible for me to ugrade to ICS?
I've tried researching here and other websites. Odin is clearly the way to go and I see lots of XXK** and other 5 digit codes which i guess are region/Firmware specific but mine don't seem to match any of these??
Any help much appreciated.
Click to expand...
Click to collapse
yes its standard
as u see the CSC :I9100XEUKH1
see the bold letters
and as for as phone root is concr'nd ur phone is not rooted from the company
but u have to do it on ur own risk
as for as ICS rom is concerened u can if u root ur phone with a custom rom of ur choice
for more details about custom ICS roms mail me @ ( [email protected])
Thanks for the info. think I'll just wait for unbranded UK ICS to be released.
Sun90 said:
yes its standard
as u see the CSC :I9100XEUKH1
see the bold letters
Click to expand...
Click to collapse
I have been reading in various places that XEU is a Polish version, is that correct? I'm a bit confused as to whether I have UK or Polish version - should be looking at XEUKH1 or XEUKH1 ??
Thanks
dnesdlrow said:
I have been reading in various places that XEU is a Polish version, is that correct? I'm a bit confused as to whether I have UK or Polish version - should be looking at XEUKH1 or XEUKH1 ??
Thanks
Click to expand...
Click to collapse
For the CSC part, you should be looking at I9100 XEU KH1; U+K is just a mere coincidence.
XEU is the code of the operator or the code of the "unbranded operator" - in my case I use "TPH" which is the unbranded csc for Portugal.
As for the token KH1:
K stands for the year - 2011 (ICS builds are from 2012 so they're L??)
H stands for the month - 11 or Nov (ICS builds have now been following this, though - e.g. LPQ, LP3, ...)
1 is an incremental number for multiple builds in the same month (also, sometimes letters are used)
Thanks.
So with these in mind for my phone:
PDA: I9100XWKH1
PHONE: I9100XXKG5
CSC: I9100XEUKH1
PDA - shows I am using Android version 2.3.4
PHONE - shows I have a phone designed to be used in the UK (XXKG5)??
CSC - shows I have an unbranded european phone??
Is that correct?
So if I upgrade my firmware to a stock UK one then all that would change above is PDA??
But if I upgraded to the Polish version of ICS how would that affect what *#1234#?
corype use
As far as i understand, installing any stock version minded for an EU phone should be the same. All they change is the language, however english should be present always.
I've got the same ROM images, and although I believe the XEU ICS has been released by Sammy yesterday, I'm (still) getting the "Your device does not support firmware upgrade" message from KIES.
I've done a hard reset of the phone, re-installed KIES with the latest version ( repeated on two PCs )...
Is there something funny about these ROM images?
Bought from Phones4U as an O2 Upgrade.
If I have to zap it using Odin, is there a way to save the existing ROM images?
About a month back maybe two I attempted to root by S2 using several guides on this site. I managed to **** it up and brick the phone, shortly after I managed to unbrick it and flash back what i thought was the correct stock firmware.
At first I noticed several small differences in the OS, the contacts list didn't show up in the phone app. As well as these small differences I also have been experiencing an issue where the phone would just turn off and the only fix would be to remove the battery and reboot.
I have no idea how to go about finding and putting back the correct firmware on to my S2. I looked at several sites that host the many many stock firmwares but was afraid to try incase it screwed up the phone even more. I tried connecting it to Samsungs Kies but that informed me that a factory restore was not compatible with my phone.
I don't really care about having a rooted phone anymore, I just want to get back to the stock firmware with my phone fully working again.
How do you expect anyone to help you out when you post a lot of drivel instead of relevant information like
Model
Firmware
Country
Carrier
theunderling said:
How do you expect anyone to help you out when you post a lot of drivel instead of relevant information like
Model
Firmware
Country
Carrier
Click to expand...
Click to collapse
My Apologises.
Model GT-I9100
Firmware 4.0.3 Build Number: IML74K.XXLPH
Country: United Kingdom
Carrier Bought it unlocked but im on EE/T-Mobile
Baseband: I9100XXKH3
Kernal: 3.0.15-I9100XXLPH-CL118559 [email protected] #3
SourTreats said:
My Apologises.
Model GT-I9100
Firmware 4.0.3 Build Number: IML74K.XXLPH
Country: United Kingdom
Carrier Bought it unlocked but im on EE/T-Mobile
Baseband: I9100XXKH3
Kernal: 3.0.15-I9100XXLPH-CL118559 [email protected] #3
Click to expand...
Click to collapse
Here use this guide to go back official and this will solve ur problem too
http://androidromupdate.com/2012/03...ficial-android-ics-4-0-3-ice-cream-sandwich2/
It looks like your running O2 branded software for a gt-i9100P model.
SourTreats said:
About a month back maybe two I attempted to root by S2 using several guides on this site. I managed to **** it up and brick the phone, shortly after I managed to unbrick it and flash back what i thought was the correct stock firmware.
Click to expand...
Click to collapse
Unless you had to perform JTAG connection or replace motherboard your device was not "bricked". Its likely you simply flashed incorrect kernel/rom resulting it device not booting to system.
I managed to restore from here
http://reviews.cnet.co.uk/mobile-ap...ck-android-rom-on-samsung-galaxy-s2-50007880/
lol carl, you work for cnet right?
ankur.co.in said:
Here use this guide to go back official and this will solve ur problem too
http://androidromupdate.com/2012/03...ficial-android-ics-4-0-3-ice-cream-sandwich2/
Click to expand...
Click to collapse
Which one of the firmwares do I want?
http://androidromupdate.com/2012/03...fficial-android-ics-4-0-3-ice-cream-sandwich/
SourTreats said:
Which one of the firmwares do I want?
http://androidromupdate.com/2012/03...fficial-android-ics-4-0-3-ice-cream-sandwich/
Click to expand...
Click to collapse
I was hoping you'd tell us
Branded? unbranded?
Take your pick. As long as it's 4.0.3 you are all good.
gastonw said:
I was hoping you'd tell us
Branded? unbranded?
Take your pick. As long as it's 4.0.3 you are all good.
Click to expand...
Click to collapse
So if i download:
United Kingdom (Three/3)
GT-I9100LKAH3G
PDA: I9100XXLPQ
CSC: I9100H3GLP2
Phone: I9100NELP2
For my unlocked S2 which has a EE/T-Mobile sim, I'll be fine?
I've tried the 4.0.3 T-Mobile and 3 4.0.3 and both have errors once installed.
I can't seem to find an unbranned UK 4.0.3 which is what mine was originally I think.
tried looking over here?
If you want unbranded go to sammobile.