Hello people
I recently tried installing CyanogenMod 10 on my intl Galaxy Player 5.0.
http://forum.xda-developers.com/showthread.php?t=2077671
Some things about my phone:
I recently rooted it and i am able to enter download or recovery mode, i have the intl model and im currently running:
This ROM:http://forum.xda-developers.com/showthread.php?t=1623529
And this KERNEL:http://forum.xda-developers.com/showthread.php?t=1414565
Everytime i get an assert failed error (yes formatting does not help.....) and when installing the kernel within the thread i bricked my phone....
I was able to recover it but i dont wanna brick my phone again so any help and/or detailted instructions how to get that rom installed would be appreciated.
When i was trying to flash, thought it was with Odin. My programme crashed upon NaNDwrite....
Thanks in advance, hope someone can help me out!
Maarten0009 said:
Hello people
I recently tried installing CyanogenMod 10 on my intl Galaxy Player 5.0.
http://forum.xda-developers.com/showthread.php?t=2077671
Some things about my phone:
I recently rooted it and i am able to enter download or recovery mode, i have the intl model and im currently running:
This ROM:http://forum.xda-developers.com/showthread.php?t=1623529
And this KERNEL:http://forum.xda-developers.com/showthread.php?t=1414565
Everytime i get an assert failed error (yes formatting does not help.....) and when installing the kernel within the thread i bricked my phone....
I was able to recover it but i dont wanna brick my phone again so any help and/or detailted instructions how to get that rom installed would be appreciated.
When i was trying to flash, thought it was with Odin. My programme crashed upon NaNDwrite....
Thanks in advance, hope someone can help me out!
Click to expand...
Click to collapse
Umm, if I'm understanding correctly, you installed the ROM- CM10, that is- and/or kernel via Odin. CM10 and the Mercurius kernel are zip files (.tar, .pit and the like are for Odin, not zips...if I understood correctly).
You want to place the ROM and the GAPPS zips on your actual SD card. Make sure the SD card is working properly. Reset and go to CWM (Power+Vol up).
Then, accd to the instructions on the CM10 page:
"Installation:
Reboot to CWM
Make a Nandroid (optional, but recommended)
Format /system if you had a different GApps package installed
Install ROM
Install GAPPS if you just formatted /system
Wipe data/factory reset if you are coming from Gingerbread
Reboot
??? (wait a while...)
Profit"
I'd say make a backup before doing any of this, but I'm assuming you're beyond that point....But before going on to CM10, it might be a good idea to recover your device first and back it up. Maybe flash a GB rom via CWM or Odin before proceeding to CM10, making a backup just in case...
Ok
alljokingaside said:
Umm, if I'm understanding correctly, you installed the ROM- CM10, that is- and/or kernel via Odin. CM10 and the Mercurius kernel are zip files (.tar, .pit and the like are for Odin, not zips...if I understood correctly).
You want to place the ROM and the GAPPS zips on your actual SD card. Make sure the SD card is working properly. Reset and go to CWM (Power+Vol up).
Then, accd to the instructions on the CM10 page:
"Installation:
Reboot to CWM
Make a Nandroid (optional, but recommended)
Format /system if you had a different GApps package installed
Install ROM
Install GAPPS if you just formatted /system
Wipe data/factory reset if you are coming from Gingerbread
Reboot
??? (wait a while...)
Profit"
I'd say make a backup before doing any of this, but I'm assuming you're beyond that point....But before going on to CM10, it might be a good idea to recover your device first and back it up. Maybe flash a GB rom via CWM or Odin before proceeding to CM10, making a backup just in case...
Click to expand...
Click to collapse
Well, i did not use the .zip on odin, i flashed the alternate kernel linked.
So i googled a bit and found out i needed CWM6 for CM10, but im running CWM5. How can i update this? on the site i couldnt find the Galaxy Player supported! thnx in advance
Maarten0009 said:
Well, i did not use the .zip on odin, i flashed the alternate kernel linked.
So i googled a bit and found out i needed CWM6 for CM10, but im running CWM5. How can i update this? on the site i couldnt find the Galaxy Player supported! thnx in advance
Click to expand...
Click to collapse
Just flash CM10 kernel zip
http://forum.xda-developers.com/showthread.php?t=2109674
from CWM5 and then reboot CMW and you will have CWM6..then just install CM10 rom.
Sent from my Nexus 7 using xda app-developers app
would he have to flash the kernel first, though? I'm unfamiliar with rjs, but am assuming that rjs version of CWM would be identical to entropys version of CWM, which means that he could just flash the CM10 ROM since it has the kernel baked in.
When I upgraded from Chip -> CM10, I just flashed via CWM, upgrading both the ROM and CWM in the process.
alljokingaside said:
would he have to flash the kernel first, though? I'm unfamiliar with rjs, but am assuming that rjs version of CWM would be identical to entropys version of CWM, which means that he could just flash the CM10 ROM since it has the kernel baked in.
When I upgraded from Chip -> CM10, I just flashed via CWM, upgrading both the ROM and CWM in the process.
Click to expand...
Click to collapse
i used rj's kernel and had to go from GB to ICS to JB or else i would get an assert error
iurnait said:
i used rj's kernel and had to go from GB to ICS to JB or else i would get an assert error
Click to expand...
Click to collapse
I remember Dkonzig mentioning this, that the path to JB was through ICS, but for my US device, I just flashed directly to GB. I remember another Int'l GB user who flashed directly to JB and was fine. this is peculiar.
so two methods to choose from, I suppose.
Related
Whenever i install a custom rom my sgs2 bootloops, it runs fine on the ones i flash with odin, but when i try to flash a custom rom it bootloops the i9100 screen and i can't even get into recovery, only download mode...
Name a ROM that's not flashing for you and list your install procedure.
Which other ROMs have you tried to install? What recovery do you currently have?
latest clockworkmod recovery...i reboot into it i wipe data and dalvick, then i install the rom and reboot(i am not a newbie) i have tried with cyanogenmod 7 and 9 , and some custom roms here in the forums...MIUI also...
vladtdr said:
latest clockworkmod recovery...i reboot into it i wipe data and dalvick, then i install the rom and reboot(i am not a newbie) i have tried with cyanogenmod 7 and 9 , and some custom roms here in the forums...
Click to expand...
Click to collapse
CM7 (and CM7 based ROMs) has to be flashed twice from recovery, and often won't flash from a CF Root kernel; instructions in the Nightly thread, post 1.
I had no issue flashing CM9 but I came to it from CM7 so I had CWMR 5.0.2.7 already. I'm unsure if people flashing from a CF Root kernel have issue moving to CM9 directly or not.
i am on latest recovery i told you and i tried with other roms 2
vladtdr said:
i am on latest recovery i told you and i tried with other roms 2
Click to expand...
Click to collapse
What's your latest recovery? I have 5.5....
Did you flash twice from recovery like I asked? Did you flash from a cf root kernel?
Since you're not giving useful info I'll unsubscribe from this thread now.
Miui = cm7 based
Sent from a Phone
sorry, i am on cwm recovery 5.0.2.7
And did you flash cm7 TWICE from recovery? It won't install otherwise.
Sent from a Phone
yes i flashed it twice, also when i chose the zip it finishes installing in like 2-3 seconds, from what i know a rom takes about 30 seconds to install at least, and then it bootloopes from the samsung galaxy s i9100 screen with the yellow triangle and it keeps restarting and i can't even get into recovery after that, i have to flash cf-root kernel again in recovery then i install simple and clean 2.4(only rom that works besides stock) and i do it all again:|...also when i try to install cm7 with rom manager, when it reboots to install the rom it boots into the stoock recovery and gives me an error, does the battery level count?
Downgrade CWM to an older version.
Flash cfroot KK5 or something like that via Odin and see if that makes a difference.
Also intratech has the old bootloader in his thread to flash via Odin. Might help also.
Sent from my GT-I9100 using XDA App
ok thank you i will report back
Have same problem after flashing KP8 rom... I believe it installed new bootloaders and it won't flash the older ones again.
Went through about 5 or 6 stock roms, some booted but had problems with google and the phone apks . Reloaded kp8 and it works perfectly... Don't have time to play around, working.... Something to do later...
CyanogenMod7
To start off a clean slate :
1. Flash XWKK5 ( Frankenstein build ) from intratech's thread via Odin
2. Flash CF-Root for XWKK5
3. Boot into CWM
4. Wipe data
5. Wipe cache
6. Advanced -> Wipe dalvik cache
7. Install zip from sdcard -> CyanogenModxxx.zip (xxx=version)
8. AGAIN Install zip from sdcard -> CyanogenModxxx.zip
9. Reboot phone
10. If your still getting a bootloop but your keys are backlit , turn off phone , remove and reinsert battery, turn it on
CyanogenMod9
You need to flash the new bootloader too ( read instructions on the CM9 thread)
MIUI
Same as CM7 , except you don't need to flash it twice
Hope i helped
EDIT : Going back from CM9 -> You CANT flash CM7 , you have to flash stock first then CM7 , also you need the old bootloader
gr4ndm4st3r_bl4ck said:
CyanogenMod7
To start off a clean slate :
1. Flash XWKK5 ( Frankenstein build ) from intratech's thread via Odin
2. Flash CF-Root for XWKK5
3. Boot into CWM
4. Wipe data
5. Wipe cache
6. Advanced -> Wipe dalvik cache
7. Install zip from sdcard -> CyanogenModxxx.zip (xxx=version)
8. AGAIN Install zip from sdcard -> CyanogenModxxx.zip
9. Reboot phone
10. If your still getting a bootloop but your keys are backlit , turn off phone , remove and reinsert battery, turn it on
CyanogenMod9
You need to flash the new bootloader too ( read instructions on the CM9 thread)
MIUI
Same as CM7 , except you don't need to flash it twice
Hope i helped
EDIT : Going back from CM9 -> You CANT flash CM7 , you have to flash stock first then CM7 , also you need the old bootloader
Click to expand...
Click to collapse
did exactly like you said, it doesent work
vladtdr said:
did exactly like you said, it doesent work
Click to expand...
Click to collapse
How is your data and/or internet connection? Have you checked the md5 sums of any of the cm7 DL's?
data and internet are fine on other roms, the downloads are good i have downloaded from official site several times
So why do you see a need to have three seperate threads on the one topic
Sent from my ThinkPad Tablet using XDA App
If u have searched u must have find the answer.
Whenever you are flashing any Samsung custom rom and stuck on boot screen, just flash any CFROOT kernel via odin it will boot.
and for CM7 & MIUI just flash Siyah 2.1 or Speedmod 13...it should boot.
This problem was faced by me and I did found the above solutions.
@MODERATORS kindly delete the duplicate posts....
zking said:
If u have searched u must have find the answer.
Whenever you are flashing any Samsung custom rom and stuck on boot screen, just flash any CFROOT kernel via odin it will boot.
and for CM7 & MIUI just flash Siyah 2.1 or Speedmod 13...it should boot.
This problem was faced by me and I did found the above solutions.
@MODERATORS kindly delete the duplicate posts....
Click to expand...
Click to collapse
Not true, Mine goes into boot loop constantly... If it does boot then I get error about google and phone apks and can't get past the "touch the android" page....
I believe their is a minority of sgsII's tha have this problem, might be something to do with the new bootloaders not being completely wiped but it doesn't matter how many times I install a stock rom I get problems... And yes, I always flash the cfroot kernels after... Doesn't help....
Hi.
Having come from the HTC HD2,I am a complete noob when it comes to galaxy s2 and flashing Roms etc;
I know I had problems.....until I discovered that unlike the HD2,placing a rom on the sd card means placing it into the internal memory of the phone and not the sd card you have inserted.
Hope this helps!
---------- Post added at 10:46 AM ---------- Previous post was at 10:42 AM ----------
rustyshack said:
Hi.
Having come from the HTC HD2,I am a complete noob when it comes to galaxy s2 and flashing Roms etc;
I know I had problems.....until I discovered that unlike the HD2,placing a rom on the sd card means placing it into the internal memory of the phone and not the sd card you have inserted.
Hope this helps!
Click to expand...
Click to collapse
What I meant was:
SD card = internal memory of phone i.e. 16Gb
External SD card = the micro SD card you physically insert into the phone
I have been trying to flash Slim ICS on my SGS2 for over an hour without success.
What happens is that when i choose the base zip it always says no zImage found and simply stops trying.
I've followed the instructions carefully.
Phone is rooted, CWM installed properly, Wipe/Format prior to flashing, files placed in external SD root, downloaded the correct files from Slim ICS website.
After the first failed attempt, i googled and searched all over XDA Forums but nothing worked.
I've tried flashing directly from the CWM Recovery Menu and the APP itself (Flash Kernel).
What i am doing wrong?
Currently my phone has the LPG firmware from the official firmwares thread.
XDA-Noobie said:
I have been trying to flash Slim ICS on my SGS2 for over an hour without success.
What happens is that when i choose the base zip it always says no zImage found and simply stops trying.
I've followed the instructions carefully.
Phone is rooted, CWM installed properly, Wipe/Format prior to flashing, files placed in external SD root, downloaded the correct files from Slim ICS website.
After the first failed attempt, i googled and searched all over XDA Forums but nothing worked.
I've tried flashing directly from the CWM Recovery Menu and the APP itself (Flash Kernel).
What i am doing wrong?
Currently my phone has the LPG firmware from the official firmwares thread.
Click to expand...
Click to collapse
hey dude try placing the Slim ICs zip file on ur internal sdcard then reboot 2 recovery and from there choose install zip from internal sdcard and flash and see
where're u coming from?
I've done successful for my just first ROM flashing experience when upgrading SGS2 from GB 2.3.3 to Official ICS DXLP7 with Odin 1.85 & now i've Slim it by Krarvind Rom..
I dunno if ur phone is coming from GB or ICS
If from GB better flash it w/ Odin 1.85 first w/ official ICS ROM (get it from Sammobile.com), wipe all data (cache, dalvik,factory & battery stat) - format system - then just can flash from CWM w/ Slim ICS
#don't forget2press thanks#
XDA-Noobie said:
I have been trying to flash Slim ICS on my SGS2 for over an hour without success.
What happens is that when i choose the base zip it always says no zImage found and simply stops trying.
I've followed the instructions carefully.
Phone is rooted, CWM installed properly, Wipe/Format prior to flashing, files placed in external SD root, downloaded the correct files from Slim ICS website.
After the first failed attempt, i googled and searched all over XDA Forums but nothing worked.
I've tried flashing directly from the CWM Recovery Menu and the APP itself (Flash Kernel).
What i am doing wrong?
Currently my phone has the LPG firmware from the official firmwares thread.
Click to expand...
Click to collapse
As already stated try placing the base on your internal SD as I don't know what version of CWM you have but some have issues with flashing from the external. You can't use the CWM app to flash the ROM as a kernel as it is not the same and there is no zimage included as AOSP ROM's are different and use boot.img for the kernel.
Once you have the base, I9100 essentials and Slim Gapps on your internal SD, boot into CWM and do the following:
1. Wipe data/factory reset
2. In mounts and storage - format /system
3. In advanced menu - Wipe dalvik
4. Find your base.zip on your internal SD and flash that
5. Repeat step 4 again as it doesn't flash first time
6. Flash essentials.zip
7. Flash Slim Gapps.zip if you want all the important Google apps
8. Reboot to system
That should be it and you shouldn't have any issues. If you do have issues then it may be bootloader related as newer ICS bootloaders sometimes have issues flashing CM9/AOSP ROM's. Hopefully you don't have that issue though.
AvRS said:
As already stated try placing the base on your internal SD as I don't know what version of CWM you have but some have issues with flashing from the external. You can't use the CWM app to flash the ROM as a kernel as it is not the same and there is no zimage included as AOSP ROM's are different and use boot.img for the kernel.
Once you have the base, I9100 essentials and Slim Gapps on your internal SD, boot into CWM and do the following:
1. Wipe data/factory reset
2. In mounts and storage - format /system
3. In advanced menu - Wipe dalvik
4. Find your base.zip on your internal SD and flash that
5. Repeat step 4 again as it doesn't flash first time
6. Flash essentials.zip
7. Flash Slim Gapps.zip if you want all the important Google apps
8. Reboot to system
That should be it and you shouldn't have any issues. If you do have issues then it may be bootloader related as newer ICS bootloaders sometimes have issues flashing CM9/AOSP ROM's. Hopefully you don't have that issue though.
Click to expand...
Click to collapse
Finally a proper guide for newbies.
Ill try it and report back!
Thanks Man!
XDA-Noobie said:
Finally a proper guide for newbies.
Ill try it and report back!
Thanks Man!
Click to expand...
Click to collapse
No worries just happens that I'm the S2 beta tester for Slim ICS hopefully all will go well for you. When you're all set up don't forget to check out the feature guide which gives you an overview of the main features of the current and next version coming soon (link in post 2 of the thread or my sig).
AvRS said:
No worries just happens that I'm the S2 beta tester for Slim ICS hopefully all will go well for you. When you're all set up don't forget to check out the feature guide which gives you an overview of the main features of the current and next version coming soon (link in post 2 of the thread or my sig).
Click to expand...
Click to collapse
Double thanks!
It worked!
XDA-Noobie said:
Double thanks!
It worked!
Click to expand...
Click to collapse
Glad to hear it, you're now ready to flash 4.0 released this morning
hi guys, first post
ive had my rooted galaxy s2 with the latest siyah kernel 3.3.2, i had cwm recover 5 and rom manager
i tried to flash cyanogen mod through rom manager, following the steps it gave me, i downloaded the files through rom manager and went through all the prompts till i clicked agee to go into recovery mode.
once it did that the phone shut off but would not turn on again so i went to turn on manually, it loads the samsung galaxy screen with the yellow triangle but goes straight into a white flashing screen.
Ive tried taking the battery out, leaving it and putting it back in again, still a flashing screen,
check what i9100 you have and download correct cm9.
using cwm format data system cacha sdcard dalvik
flash cm9 using cwm
rommanager doesnt work on GS2
atifsh said:
check what i9100 you have and download correct cm9.
using cwm format data system cacha sdcard dalvik
flash cm9 using cwm
rommanager doesnt work on GS2
Click to expand...
Click to collapse
i have the international 19100T
ahh rats i should have known rom manager does not work, , im just stuck in a white flash screen on boot up, cant get to cwm, although i can get into odin
would reflashing my kernel on odin get me through? everything is back up onto my sd card.
Try flashing a kernel first, and if that doesn't work, flash a rom in Odin, re-root your phone & restore your backup. But yeah, don't use Rom Manager with a kernel that has CWRecovery. One or the other. Rom Manager has a habit of doing stuff like what's happened to you on SGS2's which also have CWRecovery installed.
MistahBungle said:
Try flashing a kernel first, and if that doesn't work, flash a rom in Odin, re-root your phone & restore your backup. But yeah, don't use Rom Manager with a kernel that has CWRecovery. One or the other. Rom Manager has a habit of doing stuff like what's happened to you on SGS2's which also have CWRecovery installed.
Click to expand...
Click to collapse
awesome, I tried flashing the latest siyah kernel, the one that i already had on my phone before the problems, that didn't do anything to get me through, any suggestions on which kernel/rom to flash?
because you are on siyah and im not comfortable with that, please flash a stock kernel or cfroot kernel and format system data partitions after that.
now flash any official stock ICS or GB rom using Odin.
atifsh said:
because you are on siyah and im not comfortable with that, please flash a stock kernel or cfroot kernel and format system data partitions after that.
now flash any official stock ICS or GB rom using Odin.
Click to expand...
Click to collapse
ohh sweet baby jesus im i flashed a cf kernel and now im into cwm on 4.0.1.5, can i just normal reboot my phone now?
No need to format anything. Given you want to use CM9, I'd recommend you flash CM9 Resurrection Edition in Odin, put the latest CM9 nightly & Gapps on your internal/external SD card then flash that nightly & Gapps in CWM (read the first page of the CM9 discussion thread thoroughly & follow the instructions to the letter. From there you can stick with the CM9 stock kernel or flash whatever other kernel you want to use (provided it's CM9 compatible).
From then on, if you want to flash CM9 nightlies, do it via CWM/CWRecovery, just don't use Rom Manager this time I use CM9 as well & I have it frozen because I use Siyah (which has CWM).
MistahBungle said:
No need to format anything. Given you want to use CM9, I'd recommend you flash CM9 Resurrection Edition in Odin, put the latest CM9 nightly & Gapps on your internal/external SD card then flash that nightly & Gapps in CWM (read the first page of the CM9 discussion thread thoroughly & follow the instructions to the letter. From there you can stick with the CM9 stock kernel or flash whatever other kernel you want to use (provided it's CM9 compatible).
Click to expand...
Click to collapse
alrighty! thanks for the info, is cf kernel compatible with cm9? i want to just have one kernel that'll handle most roms, any suggestions?
ive reloaded my old stable phone version, the version i saved before trying to flash cyanogen mod with rom manager, this version has siyah and stock rom, back to square one *phew*
i still say wipe first, cm9 will come with its own latest cwm that can be used to flash any custom roms after.
flashing via odin version is easy and fool proof as it has everything bundled for correct working of cm9.
If you flash CM9 the CM9 kernel will overwrite/replace your CFRoot kernel, which is fine. As I said in my previous post you can stick with that if you're happy with it, or you can flash any other kernel that's CM9 compatible.
No suggestions/recommendations. Because your experience will not be the same as someone else's using a given rom or kernel. If you want to go down that path, try some kernels to find one you like. To see if a kernel is compatible with CM9, read the the dev thread devoted to the kernel in question.
OK. Given you're back @ square one, Atifsh is right when he says flashing the Resurrection version (Odin version) then flashing Gapps/nightly from there is probably a good way to go for you. Once you've done that, you'll be able to flash CM9 nightlies via CWRecovery. As said previously, read that first page of the CM9 discussion thread/instructions thoroughly before you do anything.
keegan25 said:
alrighty! thanks for the info, is cf kernel compatible with cm9? i want to just have one kernel that'll handle most roms, any suggestions?
ive reloaded my old stable phone version, the version i saved before trying to flash cyanogen mod with rom manager, this version has siyah and stock rom, back to square one *phew*
Click to expand...
Click to collapse
Something similar happened to me too. I flashed stock XWLPG, then siyah 3.3.2 and did a factory reset. After that, got stuck in a flashing white screen after the yellow triangle.
What I did: boot on download mode, flash XWLPG over PC Odin once more, did a full wipe BEFORE flashing siyah and then siyah. Everything went ok this time, but eventually I found out that every time I do a factory reset after siyah that problem would occur.
Regards,
Sent from my GT-I9100 using XDA
keegan25 said:
i have the international 19100T
ahh rats i should have known rom manager does not work, , im just stuck in a white flash screen on boot up, cant get to cwm, although i can get into odin
would reflashing my kernel on odin get me through? everything is back up onto my sd card.
Click to expand...
Click to collapse
exact same problem, except i can't put it into download mode?
i know it's powerbutton vol down but it's not working? any ideas?
acbutcher91 said:
exact same problem, except i can't put it into download mode?
i know it's powerbutton vol down but it's not working? any ideas?
Click to expand...
Click to collapse
Power + vol down + home key?
[Solved]
I am unable to flash any roms through cwm, and can only do it through odin. Flashing through cwm results in the phone not loading past the boot logo.
I formatted sd card in cwm, thinking it would only restore to factory settings, not knowing it would completely wipe everything.
From then i was unable to even see the boot logo or recovery mode, but luckily download mode still worked.
So i flashed the stock rom through odin, but it still plays up. Now the battery doesn't last more than 1 day, and constantly freezes.
Now whenever i install anything in cwm, as soon as i reboot, it goes to the bootscreen and freezes. I have tried at least 5 different roms and the same story each time, So each time i have to reflash stock rom with odin.
So any ideas to why this is? any help is appreciated. I have tried ultimate kernel wipe cleaner , or whatever it is called as well.
[Solved]
I just reflashed stock ICS in odin, and ticked the 're-partition' box. the repartition file is called " u1_02_20110310_emmc_EXT4.pit ". Now it works good as new and I'm currently running PACman rom on 4.3. gg guys.
Just to check, but you have factory reset after flashing the new ROM from CWM right?
Try these steps :
1. Flash ROMNuke script by hawkerpaul. (it's a ROM nuke, not just a kernel nuke)
2. Flash ROM in CWM.
3. Boot.
I know it sounds simple, but that's got me out of a few odd bootloop /failed flash situations. Give it a go.
Then, if that doesn't work, re-download the ROM which you're attempting to flash & try again.
One more thing, what kernel are you trying to flash the ROM from in CWM? Try a different one, say siyah. I've sometimes seen where a particular kernel won't flash but another will for no apparent reason.
Sent from a galaxy far, far away
Hopper8 said:
Just to check, but you have factory reset after flashing the new ROM from CWM right?
Try these steps :
1. Flash ROMNuke script by hawkerpaul. (it's a ROM nuke, not just a kernel nuke)
2. Flash ROM in CWM.
3. Boot.
I know it sounds simple, but that's got me out of a few odd bootloop /failed flash situations. Give it a go.
Then, if that doesn't work, re-download the ROM which you're attempting to flash & try again.
One more thing, what kernel are you trying to flash the ROM from in CWM? Try a different one, say siyah. I've sometimes seen where a particular kernel won't flash but another will for no apparent reason.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
it was stock ics cwm i think?, also another thing when I install a new rom, when it shows the progress bar, it goes up to 3 quarters then it skips the rest and says update completed (I just tried Romnuke and same story). I have also tried siyah kernel and it just freezes at the siyah kernel instead. Im currently stuck on stock ICS 4.0.2
Not sure what you mean by 'stock ICS CWM'?
And just to make sure, you definitely have an i9100 right? Not a variant, i9100g etc? Just asking as 4.0.2 was never released for i9100, only 4.0.3 and 4.0.4 (stay away from that one)
So now, re-download the ROM which you're attempting to flash, and try again after the ROMNuke script. Does the script run successfully? Or does it have errors /messages which indicate it didn't run successfully?
Sent from a galaxy far, far away
Hopper8 said:
Not sure what you mean by 'stock ICS CWM'?
And just to make sure, you definitely have an i9100 right? Not a variant, i9100g etc? Just asking as 4.0.2 was never released for i9100, only 4.0.3 and 4.0.4 (stay away from that one)
So now, re-download the ROM which you're attempting to flash, and try again after the ROMNuke script. Does the script run successfully? Or does it have errors /messages which indicate it didn't run successfully?
Sent from a galaxy far, far away
Click to expand...
Click to collapse
my bad it is 4.0.3, it is definitely only gt-i9100, and in recover mode it says CWM-based Recover v5.0.2.7
kobe24lebron23jordan said:
my bad it is 4.0.3, it is definitely only gt-i9100, and in recover mode it says CWM-based Recover v5.0.2.7
Click to expand...
Click to collapse
All good. And also good that you have an i9100.
Ok, so have you tried the things I said?
1. Try flashing from a different kernel (your choice, try one other than Siyah)
2. Re-download the ROM & reflash with Nuke script then ROM.
[Solved]
5 months later I found the answer when messing with odin. What you do is tick the 're-partition' box, and then in the 'pit' sections you need the partition file i guess, for the i9100 its called u1_02_20110310_emmc_EXT4.pit . hope this helps anyone else who may have this problem
Hi everyone.
i rooted my phone with this guide which installed a based CWM recovery on my phone with Siyah-s2-v6.0b4.tar using Odin.
Now i want to run a touch CWM recovery but no matter how i tried- no way worked and i always get the based CWM recovery again.
I tried ROM manager and RECOVERY tools but none of these actually worked (although i got success messages).
I also tried to download the recovery file from the official site of CWM, but when i tried to copy it to my sd card an error message popped out saying copy can't be done and the device is not connected or working or something.. i can copy other zip files without any problem.
can anyone help?
thanks.
1) Do not use Rom Manager with the SGS2. It will break recovery and/or cause bootloops eventually. It may even brick your phone. You don't need it.
2) Any recovery flashed independently of the kernel on the SGS2 will only persist until the next reboot, which is why what you're trying isn't working. If you want a touch version of CWM, flash/run a kernel which has this. Which kernels ? Read the kernel threads in the development section (I don't use PhilZ on my SGS2, but his comes to mind as I use it on my I9505).
heywebi
MistahBungle said:
1) Do not use Rom Manager with the SGS2. It will break recovery and/or cause bootloops eventually. It may even brick your phone. You don't need it.
2) Any recovery flashed independently of the kernel on the SGS2 will only persist until the next reboot, which is why what you're trying isn't working. If you want a touch version of CWM, flash/run a kernel which has this. Which kernels ? Read the kernel threads in the development section (I don't use PhilZ on my SGS2, but his comes to mind as I use it on my I9505).
Click to expand...
Click to collapse
thank you very much! i'm relieved i didn't brick my phone, that could have been a mess..
flashing kernels is like regular flashing? just installing the zip file? do i need to wipe any data or cache or something?
thanks for your response.
Follow the flashing instructions for the kernel in question to the letter (always on the first page of the kernel thread, always very clear/precise/easy to follow).
MistahBungle said:
.... I use it on my I9505).
Click to expand...
Click to collapse
In that case, great to still see you in the s2 forums
Sent from a galaxy far, far away