I am having a challenge.
I rooted, unlocked using odin. I installed Beans v6 and everything works fine. I then tried to install Beans v7 and could not. I tied to install Eclipse 1.1 and could not. Everything goes fine, says successful, when I reboot it just hangs on the "Samsung Galaxy Note II" screen.
I have verified the MD5 before attempting to flash.
I have tried TWRP 2.3.3.2 and CWM and neither work.
I have flashed both radios I605VRALL4 and I605VRALJB
I have wiped everything, before flashing using TWRP, CWM and SuperWipe. After flashing I have cleared cache and dalvik.
I have also tried dirty flashing.
In all attempts it hangs perpetually. I have let it hang for over half hour. I have gone back into TWRP and again cleared the cache and dalvik.
My phone did that very same thing. It was suggested to me to use a different browser to download the roms. So I started using firefox, and chrome. Havent had any problem since.
Sent from my SCH-I605 using xda app-developers app
MHatter469 said:
I am having a challenge.
I rooted, unlocked using odin. I installed Beans v6 and everything works fine. I then tried to install Beans v7 and could not. I tied to install Eclipse 1.1 and could not. Everything goes fine, says successful, when I reboot it just hangs on the "Samsung Galaxy Note II" screen.
I have verified the MD5 before attempting to flash.
I have tried TWRP 2.3.3.2 and CWM and neither work.
I have flashed both radios I605VRALL4 and I605VRALJB
I have wiped everything, before flashing using TWRP, CWM and SuperWipe. After flashing I have cleared cache and dalvik.
I have also tried dirty flashing.
In all attempts it hangs perpetually. I have let it hang for over half hour. I have gone back into TWRP and again cleared the cache and dalvik.
Click to expand...
Click to collapse
Try flashing the most recent TWRP. I think it's 2.4.1.
Good luck
Jeff Zaugg said:
My phone did that very same thing. It was suggested to me to use a different browser to download the roms. So I started using firefox, and chrome. Havent had any problem since.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Will try this, I use Chrome, but will try Firefox. Thanks for the suggestion, I will let you know.
Geezer Squid said:
Try flashing the most recent TWRP. I think it's 2.4.1.
Good luck
Click to expand...
Click to collapse
Updated to TWRP 2.4.1...
Thanks for the suggestions.
I am now on TWRP 2.4.1 and downloaded another fresh copy using Firefox...
Progress? Dunno, it now bootloops, after the second time it loads TWRP.
I did a factory reset and wiped the cache and dalvik. Rebooted again and still double bootloop into TWRP.
So still looking for help if anyone has any other suggestions.
Have you tried flashing any kernels? usually if a phone won't boot that early on the kernel is to blame.
Wow your still having the same problems that's crazy. You should just go back to stock. Then root unlock again with the new casual. I wish I could see your phone and what's going on.
Sent from my SCH-I605 using Tapatalk 2
:highfive:
broprah said:
Have you tried flashing any kernels? usually if a phone won't boot that early on the kernel is to blame.
Click to expand...
Click to collapse
I have tried Beans and Perseus kernels.
shawnx1 said:
Wow your still having the same problems that's crazy. You should just go back to stock. Then root unlock again with the new casual. I wish I could see your phone and what's going on.
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
I wish someone could see this too. I have been flashing ROMs for a decade, starting with WinMo and through several Droids, I have never encountered anything like this.
I think I will try the stock and unlock again at this point. Let you know what happens.
Still having trouble. I follow the directions on http://forum.xda-developers.com/showthread.php?t=2024207 part 1b.
I have downloaded CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 several times, from different mirrors, using different browsers. (IE, Chrome, Firefox)
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is invalid.
<OSM> End...
Any suggestions?
Wow damn what luck lol. Is your PC on a wireless network? If you can plug it directly into the router then go download beans 7 again Let's get you fixed up ill be monitoring this post all day
Sent from my SCH-I605 using Tapatalk 2
shawnx1 said:
Wow damn what luck lol. Is your PC on a wireless network? If you can plug it directly into the router then go download beans 7 again Let's get you fixed up ill be monitoring this post all day
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for helping. I was on a wifi, now plugged into the router. Downloading new copy of Beans 7 now.
MHatter469 said:
Thanks for helping. I was on a wifi, now plugged into the router. Downloading new copy of Beans 7 now.
Click to expand...
Click to collapse
Ok cool try to flash beans 7 again you know the drill lol factory reset wipe davlik cache and cache and good to go. your on beans 6 atm right? also what kernel are you running atm on your note 2?
shawnx1 said:
Ok cool try to flash beans 7 again you know the drill lol factory reset wipe davlik cache and cache and good to go. your on beans 6 atm right? also what kernel are you running atm on your note 2?
Click to expand...
Click to collapse
I am on Beans 6, I run Beans kernel, and been running L4 radio.
Okay cool. I'm just thinking your phone is fine and your wireless network is screwing up your downloads because if you can boot b6 then why not b7 it makes no sense. Do you a md5 checker on your PC? If not get one just so we can check the md5. If the md5 is correct you may want to use your Samsung USB cable and a different USB port on your PC of your not using the samsung one already.
Sent from my SCH-I605 using Tapatalk 2
shawnx1 said:
Okay cool. I'm just thinking your phone is fine and your wireless network is screwing up your downloads because if you can boot b6 then why not b7 it makes no sense. Do you a md5 checker on your PC? If not get one just so we can check the md5. If the md5 is correct you may want to use your Samsung USB cable and a different USB port on your PC of your not using the samsung one already.
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Yes, I check the MD5 and they match. confirmed the MD5 on the device. So the file made it through to the Note 2 ok.
Ok, so factory reset, wipe dalvik and cache. Complete, Install v7. Any options in particular I should check or uncheck?
Okay cool let me know if you get the new copy of b7 to install and boot. I have a few more ideas of it doesn't. Also can you make sure super user is still on your phone and it runs.
Sent from my SCH-I605 using Tapatalk 2
---------- Post added at 02:04 PM ---------- Previous post was at 02:03 PM ----------
MHatter469 said:
Ok, so factory reset, wipe dalvik and cache. Complete, Install v7. Any options in particular I should check or uncheck?
Click to expand...
Click to collapse
Just do your normal install no sd swap though for now
Sent from my SCH-I605 using Tapatalk 2
shawnx1 said:
Okay cool let me know if you get the new copy of b7 to install and boot. I have a few more ideas of it doesn't. Also can you make sure super user is still on your phone and it runs.
Sent from my SCH-I605 using Tapatalk 2
---------- Post added at 02:04 PM ---------- Previous post was at 02:03 PM ----------
Just do your normal install no sd swap though for now
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Ok, I do not do SD swap, so doing my normal apps, installing now...
Related
I tired installing Jetpack ROM on my phone, but my idiot self forgot to wipe factory data and clear the cache, Now when it turns on it goes to the vibrant screen but then a voice says "convert data partition..not enough space on partition". And then a rainbow of colors flash and it goes back to the vibrant screen doing the same thing over and over. When i plug it into the computer via usb, and open up odin the id shows up for about 2 seconds and then disappears. Please can someone help?
You got bootloop probably from ext4 problem.
Try to get in recovery with keys Then flash rom again if its still there and SD didnt wipe
Otherwise you need to be in download mode for Odin and flash stock
Sent from my SGH-T959 using XDA App
HI ho, Hi ho, off to odin we go....whistle, whistle, whistle,
If he's got rainbows then he won't be able to see recovery, have to odin
Sent from my SGH-T959 using XDA App
Recovery mode isn't working, I was able to connect to odin, but not in download mode, my screen in completely blacked. I put in the pit file and tar file and hit start and this what happened in odin.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
So right now its stuck on the last step "setupconnection". Do I just leave it alone, its been like this for the past 20 minutes.
Odin not gonna do anything w/o download mode.
Sent from my SGH-T959 using XDA App
So what am I suppose to do? Can I do anything else?
If you get boot loop when you turn it on you should be able to get to download mode fine. Are you sure you are doing key combo right? Did you flash GB boot loader?
Sent from my SGH-T959 using XDA App
trailblazerz11 said:
If you get boot loop when you turn it on you should be able to get to download mode fine. Are you sure you are doing key combo right? Did you flash GB boot loader?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I pressed the volume up and down button along with the power button. Isn't that the proper way to try to get it download mode? Also I have to idea what you mean by "flashing the GB boot loader".
You were suppose to flash GB boot loaders for GB rooms to get rid of rainbows in recovery..
Go to Q&A stickie noob guide and link to "go back to JFD stock" guide.
Should really research and know what you are doing before flashing roms.
Sent from my SGH-T959 using XDA App
Thanks trailblazer11, I've gotten back to factory setting, and thank you everyone else in this thread for helping out.
Hey guys I had just started to think that I had seen it all but it turns out that I havnt. So let me start off by saying I've tried following this guide here: http://forum.xda-developers.com/showthread.php?t=1026746
To get back to stock but when I boot I get to the lock screen and all is fine but when I go to unlock the phone and get to the os around 5 different things force close ranging from touch wiz to settings and to google app packages and I also get a system UID inconstant error and asks if im feeling lucky (but it does matter because I cant get to the home screen seeing as that touch wiz is force closeting constantly) . So... (Deep Breath) I have tryed wiping (factory data reset), wiping cashe partition and dalvik also formating everything I can in the advanced tab in CWM. So please give me and hand with my issue and if you have a file i need to download please post a link with it.
Thanks
riom4 said:
Hey guys I had just started to think that I had seen it all but it turns out that I havnt. So let me start off by saying I've tried following this guide here: http://forum.xda-developers.com/showthread.php?t=1026746
To get back to stock but when I boot I get to the lock screen and all is fine but when I go to unlock the phone and get to the os around 5 different things force close ranging from touch wiz to settings and to google app packages and I also get a system UID inconstant error and asks if im feeling lucky (but it does matter because I cant get to the home screen seeing as that touch wiz is force closeting constantly) . So... (Deep Breath) I have tryed wiping (factory data reset), wiping cashe partition and dalvik also formating everything I can in the advanced tab in CWM. So please give me and hand with my issue and if you have a file i need to download please post a link with it.
Thanks
Click to expand...
Click to collapse
I'll say just use ODIN. Download the program, EH03 (if you're Verizon), and PIT v2.2. If you need additional help use this link.
http://forum.xda-developers.com/showthread.php?t=1026746
AdelosMeansUnknown said:
I'll say just use ODIN. Download the program, EH03 (if you're Verizon), and PIT v2.2. If you need additional help use this link.
http://forum.xda-developers.com/showthread.php?t=1026746
Click to expand...
Click to collapse
I've already tryed odin and uing the pit it boots but has tons of fcs and errors
If you can find the stock eclair ROM (2.1) it might be worth flashing. It has a 2.1 pit that seems to format more completely and works better for me, then I odin GB with 2.2 pit. I seem to have trouble reformatting with 2.2 .pit and 2.1 .pit works every time. 2.1 pit file is also the only one that will correctly fix ext formatting such as voodoo lagfix. I'm on us cellular so my files won't help.
Sent from my SCH-I500 using xda premium
mezster said:
If you can find the stock eclair ROM (2.1) it might be worth flashing. It has a 2.1 pit that seems to format more completely and works better for me, then I odin GB with 2.2 pit. I seem to have trouble reformatting with 2.2 .pit and 2.1 .pit works every time. 2.1 pit file is also the only one that will correctly fix ext formatting such as voodoo lagfix. I'm on us cellular so my files won't help.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
hey if you dont mind later could you link me to the 2.1 pit i think that i can find it but just in case. thanks for the advice i will post with results
You should definitely take a look at DROIDSTYLES GUIDE. Its in the General section.
Sent from my GT-I9300 using xda app-developers app
Dl01 2.1 eclair file is here, I would download all those fassy stock ROMs for future needs:
http://forum.xda-developers.com/showthread.php?t=1526488
The pit he has linked is 2.2.2. If that doesn't work I have 2.2.1 here:
http://db.tt/KfdoMJo9
Report back please. Hope this helps.
Sent from my SCH-I500 using xda premium
mezster said:
Dl01 2.1 eclair file is here, I would download all those fassy stock ROMs for future needs:
http://forum.xda-developers.com/showthread.php?t=1526488
The pit he has linked is 2.2.2. If that doesn't work I have 2.2.1 here:
http://db.tt/KfdoMJo9
Report back please. Hope this helps.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Ok im pushing now using your 2.2.1 pit i guess if this doesn't work i could try heimdall but i have never used it before and am skeptical to so wish my luck if this doesn't work ill report back
I didn't see you mention it in your earlier posts but are you making sure re-partition is checked in odin when flashing stock ROM with pit file? If not, do it. If so, disregard.
Sent from my SCH-I500 using xda premium
mezster said:
I didn't see you mention it in your earlier posts but are you making sure re-partition is checked in odin when flashing stock ROM with pit file? If not, do it. If so, disregard.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Yup its selected just and update i tryed the 2.2.1 pit with 2.1 and odin stopped working each time i tryed it and then i tryed 2.2.2 pit and it would "boot" but the screen wouldn't turn on im trying 2.2 pit now
Never mind I read your post wrong.
Sent from my SCH-I500 using xda premium
riom4 said:
Yup its selected just and update i tryed the 2.2.1 pit with 2.1 and odin stopped working each time i tryed it and then i tryed 2.2.2 pit and it would "boot" but the screen wouldn't turn on im trying 2.2 pit now
Click to expand...
Click to collapse
just an update i tryed the 2.2 2.2.1 and 2.2.2 pits and none of them worked I also tryed without the pit and got the same result so now im going to try with gingerbread
wish me luck
riom4 said:
just an update i tryed the 2.2 2.2.1 and 2.2.2 pits and none of them worked I also tryed without the pit and got the same result so now im going to try with gingerbread
wish me luck
Click to expand...
Click to collapse
Fingers crossed
Sent from my SCH-I500 using xda premium
mezster said:
Fingers crossed
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
nope nothing worked trying to wipe everything but i went to wipe /system but it said I couldn't because it wasn't able to unmount it so im going to wipe every thing and do an old nan-droid and see if i can get it to work. otherwise any ideas???
Heimdall? People have reported success with it when Odin fails. Never used it myself.
Sent from my SCH-I500 using xda premium
mezster said:
Heimdall? People have reported success with it when Odin fails. Never used it myself.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
ill give it a shot later to tired to think now so yea.... stay tuned for an adventure
ok so I made some progress I got cm 7.1 to boot up okay but in settings>storage and under internal storage it says total space 0.00b and available space 0.00b so what do i do?
Can you tell us exactly what steps you're using when you use Odin? I noticed the guide you linked to in the OP was a really old sticky. Droidstyle's Guide is the only one that is currently up to date. It doesn't mean you've done anything wrong with Odin, I just want to make sure you have the files in all the right places and the correct check boxes checked.
Please post questions in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
My phone doesn't start..
"Samsung Galaxy Note II" logo is looping.
Volume Up + Home + Power doesn't lead me Recovery mode.
Volume Down + Home + Power does get me to download mode though.
I used Odin3 to install stock JB (along with .pit file) but it's still looping...
Help me... PLEASE..?
wjdzm said:
My phone doesn't start..
"Samsung Galaxy Note II" logo is looping.
Volume Up + Home + Power doesn't lead me Recovery mode.
Volume Down + Home + Power does get me to download mode though.
I used Odin3 to install stock JB (along with .pit file) but it's still looping...
Help me... PLEASE..?
Click to expand...
Click to collapse
I think your best bet is going to be a USB Jig.
http://www.ebay.com/sch/i.html?_odkw=USB+JIG&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313&_nkw=USB+JIG+Note+2&_sacat=0
wjdzm said:
My phone doesn't start..
"Samsung Galaxy Note II" logo is looping.
Volume Up + Home + Power doesn't lead me Recovery mode.
Volume Down + Home + Power does get me to download mode though.
I used Odin3 to install stock JB (along with .pit file) but it's still looping...
Help me... PLEASE..?
Click to expand...
Click to collapse
What did you flash to start this?
Sent from my SCH-I605 using Tapatalk 2
---------- Post added at 04:47 AM ---------- Previous post was at 04:47 AM ----------
Lightyear25 said:
I think your best bet is going to be a USB Jig.
http://www.ebay.com/sch/i.html?_odk...45573.m570.l1313&_nkw=USB+JIG+Note+2&_sacat=0
Click to expand...
Click to collapse
That just fixed download mode which he can already get into
Sent from my SCH-I605 using Tapatalk 2
Did you possibly flash the International Note 2 kernel or worse, a different phone's kernel by mistake?
Sent From My Galaxy Note 2
kintwofan said:
What did you flash to start this?
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
I tried installing "Whompasaurus" ROM from VanillaRootBox.
If I remember correctly, I wiped/factory reset and system vanillaRB then installed Mod version of Whompasaurus ROM.
After than I installed Full version of Whompasaurus ROM w/o wiping any chache, data, system, etc.
And now here I am, "Samsung Galaxy Note II" logo turning on and off not allowing me to enter recovery mode.
FYI, a glimpse of TWRP Recovery image showed for a short period before bootloop when I did Up + Home + Power.
Now I flashed stock ROM using Odin but nothing's happening...
DroidOnRoids said:
Did you possibly flash the International Note 2 kernel or worse, a different phone's kernel by mistake?
Sent From My Galaxy Note 2
Click to expand...
Click to collapse
Well I tried to install perseus kernel which was one of the options of Whompasaurus ROM
Which files did you try with odin? They were successful but still looped?
Sent from my SCH-I605 using Tapatalk 2
wjdzm said:
I tried installing "Whompasaurus" ROM from VanillaRootBox.
If I remember correctly, I wiped/factory reset and system vanillaRB then installed Mod version of Whompasaurus ROM.
After than I installed Full version of Whompasaurus ROM w/o wiping any chache, data, system, etc.
And now here I am, "Samsung Galaxy Note II" logo turning on and off not allowing me to enter recovery mode.
FYI, a glimpse of TWRP Recovery image showed for a short period before bootloop when I did Up + Home + Power.
Now I flashed stock ROM using Odin but nothing's happening...
Click to expand...
Click to collapse
You are not supposed to flash mod before the full install. Ugh no wonder you jacked up your phone :banghead:
Sent from my SCH-I605 using Tapatalk 2
bond32 said:
Which files did you try with odin? They were successful but still looped?
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
I used Odin after loop started.
Odin did "Pass" and installed the stock ROM.
hopesrequiem said:
You are not supposed to flash mod before the full install. Ugh no wonder you jacked up your phone :banghead:
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Yikes. Does that mean there's no fix to this?
wjdzm said:
Yikes. Does that mean there's no fix to this?
Click to expand...
Click to collapse
two things. First I think you had to flash the sd card fix before downgrading. At last that's what the op says for root box. Second what Odin file are you using? For you I would use the full stock jg image. Also pull sd card and sim before Odin and leave out to see if it works
Sent from my SCH-I605 using Tapatalk 2
wjdzm said:
I used Odin after loop started.
Odin did "Pass" and installed the stock ROM.
Click to expand...
Click to collapse
I mean the exact name of what you tried to use.
Sent from my SCH-I605 using Tapatalk 2
bond32 said:
I mean the exact name of what you tried to use.
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
This right here. It makes a huge difference.
Sent from my SCH-I605 using Tapatalk 2
Since he can get to download mode, I feel like he's just using the incorrect file. First I would try route66, and if no go still use imnuts'
Sent from my SCH-I605 using Tapatalk 2
bond32 said:
Since he can get to download mode, I feel like he's just using the incorrect file. First I would try route66, and if no go still use imnuts'
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
I tried both route66 and imnuts'...
I also tried installing stock ROM which I got from samsung-updates.com.
Does it matter "how" I flash these files with Odin?
http://forum.xda-developers.com/showpost.php?p=38130862&postcount=16
I think this is exactly what happened.
So using the full stock restore completes without error? Try the alternate restore too.
http://forum.xda-developers.com/showthread.php?p=35265728
Sent from my SCH-I605 using Tapatalk 2
bond32 said:
So using the full stock restore completes without error? Try the alternate restore too.
http://forum.xda-developers.com/showthread.php?p=35265728
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
I tried the alternate version... not working... oh god im scared.
It's weird because I can't seem to flash the same ROM file with Odin after I flash it once. I get the following log when trying to flash the same stock ROM:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605_VRALJB_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
i actually did the same thing and has the same issue i has to flash completely stock through odin about 30 times with the pit and use the wipe nand option and it eventually came back took me about 6 hours to get it back but it does work keep trying over and over itll come back
CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar
sch-i605-16gb.pit
those are the two files i used and after i had to do that after update version of casual
My phone froze on me earlier and threw me into bootloops. Recovery didn't work, so I flashed it again. Then I did a factory reset and flashed my rom again and I have no service at all and the play store doesn't work.
How do I get my baseband back?
For some reason the phone can't find the internal storage. I don't know how to fix this.
Sent from my SCH-I605 using Tapatalk 4 Beta
benwalburn said:
My phone froze on me earlier and threw me into bootloops. Recovery didn't work, so I flashed it again. Then I did a factory reset and flashed my rom again and I have no service at all and the play store doesn't work.
How do I get my baseband back?
For some reason the phone can't find the internal storage. I don't know how to fix this.
Click to expand...
Click to collapse
If your phone can see the external card you could download a baseband from xda, copy it the card then flash the baseband from there.
Ridin' a Note 2 blast
universexda said:
If your phone can see the external card you could download a baseband from xda, copy it the card then flash the baseband from there.
Ridin' a Note 2 blast
Click to expand...
Click to collapse
I tried two different ones from here, but it still says baseband unknown.
On another note, fixing permissions fails completely. It seems I'm completely borked
Sent from my SCH-I605 using Tapatalk 4 Beta
It might be best to restore to stock and start over. DL alternate restore and flash that from Odin. If that doesn't work then root66.
Ridin' a Note 2 blast
Considering all the issues I'm having, root66 looks like the best way to go. Thank you.
Sent from my SCH-I605 using Tapatalk 4 Beta
benwalburn said:
Considering all the issues I'm having, root66 looks like the best way to go. Thank you.
Sent from my SCH-I605 using Tapatalk 4 Beta
Click to expand...
Click to collapse
If you use Root66 it doesn't completely wipe your phone like VRALJB or VRALL4 so you need to check the NAND Erase box in Odin before starting the flash.
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
If you use Root66 it doesn't completely wipe your phone like VRALJB or VRALL4 so you need to check the NAND Erase box in Odin before starting the flash.
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
I flashed root66 and it's stuck on the splash screen. Does it take a while to boot after that? I did factory reset and I had to format /data because TWRP thought I had encrypted data.
Update: flashed JellyBeans but it has no storage available (negative value on internal storage). Still no service. Flashing any of the modems that Scottsroms has does not update it. Maybe I can get it through odin. I heard that it takes a few minutes to flash a new modem, but it only takes a few seconds on my phone and does nothing
Successfully flashing a modem via TWRP only took a few seconds for me.
Ridin' a Note 2 blast
---------- Post added at 03:17 PM ---------- Previous post was at 03:07 PM ----------
If you haven't already you may want to reformat internal storage and or flash root66 with the pit file or after that with both of those and Nand erase selected in Odin.
Ridin' a Note 2 blast
universexda said:
Successfully flashing a modem via TWRP only took a few seconds for me.
Ridin' a Note 2 blast
---------- Post added at 03:17 PM ---------- Previous post was at 03:07 PM ----------
If you haven't already you may want to reformat internal storage and or flash root66 with the pit file or after that with both of those and Nand erase selected in Odin.
Ridin' a Note 2 blast
Click to expand...
Click to collapse
I flashed the full stock and it fixed my phone. Apparently, root66 doesn't update everything.
How do you Flash the Full Stock?
benwalburn said:
I flashed the full stock and it fixed my phone. Apparently, root66 doesn't update everything.
Click to expand...
Click to collapse
I am having the same baseband unknown problem. What do I do?
benwalburn said:
I flashed the full stock and it fixed my phone. Apparently, root66 doesn't update everything.
Click to expand...
Click to collapse
That's why I and other users recommended you select NAND erase in Odin when using Root66, it isn't that it doesn't update everything it just doesn't completely wipe everything.
Sent from my SCH-I605 using XDA Premium HD app
---------- Post added at 03:40 PM ---------- Previous post was at 03:40 PM ----------
darcy6901 said:
I am having the same baseband unknown problem. What do I do?
Click to expand...
Click to collapse
Flash roo66 in Odin with NAND Erase checked.
Sent from my SCH-I605 using XDA Premium HD app
NOTE II Baseband
benwalburn said:
I flashed the full stock and it fixed my phone. Apparently, root66 doesn't update everything.
Click to expand...
Click to collapse
It sounds like you were able to fix your problem. I think I am having the same problem as you. Could you please tell me in detail what you did? I have been rooting phones for almost 5 years now but this Note 2 is an entirely different beast.
darcy6901 said:
It sounds like you were able to fix your problem. I think I am having the same problem as you. Could you please tell me in detail what you did? I have been rooting phones for almost 5 years now but this Note 2 is an entirely different beast.
Click to expand...
Click to collapse
Ever fix it?
I recently flashed the latest Hyperdrive ROM onto my Samsung Galaxy S4 Device. Everything was perfectly fine until I started getting weird unmounting errors from my SD card. I thought nothing of it as my camera still had access to files on the SD card. But tonight after eating dinner I came up to find my phone on the Samsung Custom screen with the lock icon as if it were booting up. I learned that this was a boot loop. So I instantly tried to do a factory reset and the problem arose when I couldn't access recovery. It would show the text in the top left corner then it would disappear and reboot and get stuck in the same loop. When I plug in the charger it gets stuck on this battery icon but it is frozen.
After hours of searching I downloaded the original verizon rom from stockroms.net. After having trouble with it saying PIT not found I realized that it was the USB port. It successfully flashed the original firmware. It then went back into the boot loop. The video I was watching to do this said this could happen so I tried once again to go into recovery. This time I knew the recovery was even back to default (I was using goo manager) as the text at the top left changed. But it once again rebooted and got stuck in the boot loop not letting me into recovery.
If anyone has anything I can do to fix this, I am all ears. Sorry if this has been answered previously but I have found nothing. Trust me. I have searched.
EDIT: I was able to get into ODIN nothing else. I flashed with ODIN.
Were you flashing the stock rom through recovery? If you werent grab the odin flashable images from the dev section and flash that. Should get you running again.
Sent from my SCH-I545 using Tapatalk 2
hexitnow said:
Were you flashing the stock rom through recovery? If you werent grab the odin flashable images from the dev section and flash that. Should get you running again.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
I flashed with Odin if that is what you mean. I can't get into recovery but I used Odin to flash the original firmware.
nickcode122 said:
I flashed with Odin if that is what you mean. I can't get into recovery but I used Odin to flash the original firmware.
Click to expand...
Click to collapse
After you said u grabbed the stock firmware from stockroms you didnt specify your flashing method I wasnt sure how you were doin it. Your download might be corrupted so I would delete it, redownload it, then verify the md5 is correct, and then try again. Your flashing under pda and not phone right?
Sent from my SCH-I545 using Tapatalk 2
hexitnow said:
After you said u grabbed the stock firmware from stockroms you didnt specify your flashing method I wasnt sure how you were doin it. Your download might be corrupted so I would delete it, redownload it, then verify the md5 is correct, and then try again.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
How do I verify the md5 is correct? Also, I'm wondering if the problem lies with it being a nowipe version of the rom. Is there anyway to find a rom that WILL wipe? I can't find any around the forum nor on google.
Google md5 checker or md5 verifier. I checked the link but sadly there wasnt an md5 posted for the file. I would still download a verifier tho they come in handy. There is wipe versions in the dev section. I decided to be nice and I grabbed the link for you. Also your flashing under pda and not phone right?
http://forum.xda-developers.com/showthread.php?t=2289325
Sent from my SCH-I545 using Tapatalk 2
hexitnow said:
Google md5 checker or md5 verifier. I checked the link but sadly there wasnt an md5 posted for the file. I would still download a verifier tho they come in handy. There is wipe versions in the dev section. I decided to be nice and I grabbed the link for you. Also your flashing under pda and not phone right?
http://forum.xda-developers.com/showthread.php?t=2289325
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I will try and download this. And yes, I'm using the PDA section.
nickcode122 said:
Thanks, I will try and download this. And yes, I'm using the PDA section.
Click to expand...
Click to collapse
Ok just checkin. Hope it works out for ya :thumbup:
Sent from my SCH-I545 using Tapatalk 2
hexitnow said:
Ok just checkin. Hope it works out for ya :thumbup:
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
This rom worked! Thank you so much! Any idea what happened so I can prevent it from happening again?
I would assume it was probably just a bad download. Glad to hear you got 'er up and running.
Sent from my SCH-I545 using Tapatalk 2