I downloaded and installed the JB leak and I cleared my cache, I factory reset from system recovery. Now I can't get into my phone. When I turn it on I get the M logo then a black screen. I have tried Matt's ICS razr utility same deal and I tried he's unbrick jelly bean tool. Nothing is working. When I plug the phone into my pc it does ask me if I want to install motocast but I think that is it just reading the drive. does anyone have an idea? Razr maxx Verizon US. TY HELP HELP HELP.
brokentoy1970 said:
I downloaded and installed the JB leak and I cleared my cache, I factory reset from system recovery. Now I can't get into my phone. When I turn it on I get the M logo then a black screen. I have tried Matt's ICS razr utility same deal and I tried he's unbrick jelly bean tool. Nothing is working. When I plug the phone into my pc it does ask me if I want to install motocast but I think that is it just reading the drive. does anyone have an idea? Razr maxx Verizon US. TY HELP HELP HELP.
Click to expand...
Click to collapse
ICS Razr Utility should have worked... not too sure what the problem is. Maybe RSD Lite?
Check your download, then when booting holding volume up and down when in ap got to recovery clear cache and everything and try again. You were on 211 before you started correct? Will not work on .215 or any of the leaks after 211
Related
I tried loading ICS to my Droid Razr using Droid Razr Utility 1.7. It failed with a Status 7 error and now my phone is stuck in 3G only. It wont connect to LTE. Can someone please help me out?????
So you're still on .181?
I have written a guide (posted under development forums by user streetmedic) to manually update to the 4.0.4 ICS OTA which should help you out,
The side load 7 error is usually caused by either the need to wipe data/cache or the 1.7 utility did not successfully flash the ICS recovery.
When you boot into recovery, is it a picture of an android laying down, with a red exclamation triangle over it, or a different image? The image described indicates you are definitely using the ICS recovery which the 1.7 utility installs. If it's different, try the utility again.
If that's not the issue, while in recovery do a wipe data/factory reset AND wipe cache. After completing both of these, turn the phone off, reboot back into recovery, and install the update. Any further issues can be resolved in the development thread. This should however, fix your problem and get you on the OTA.
That was the guide I used and yes I'm still on .181 with ICS recovery. I'll give a shot again and let you know the results. Thanks
If it still gives you any issues you can use matts 1.6 utility to fastboot a fresh 181 system, then restart my guide. Best of luck
Worked like a charm!! Thanks!!!!
Sent from my DROID RAZR using xda app-developers app
Can someone help me get me out of recovery?? was running 4.04 ICS Razr Maxx.. rooted..flashed.. eclipse rom 1.3.. patched with gsm even though Im cdma.. thought i had to do it.. flashed but then text messege stopping pop ups..no 4g cant get into phone wont go through google just keeps going back to start screen english etc...tried fast boot file fails right away and my rsd lite and phone.. not connecting errors..start smartphone over or retry.. put 611.211 on flash drive put it on memory card and fails when flashing through recovery mode.. weird thing backup is there but its like empty.. thinking if i had restore i might be able to.. but i go to backup and 8152012 is there but when you press it its empty doesnt do nething..im at my wits end.. ive fixed past phones before but getting frusterated..please help
PAZZ632 said:
Can someone help me get me out of recovery?? was running 4.04 ICS Razr Maxx.. rooted..flashed.. eclipse rom 1.3.. patched with gsm even though Im cdma.. thought i had to do it.. flashed but then text messege stopping pop ups..no 4g cant get into phone wont go through google just keeps going back to start screen english etc...tried fast boot file fails right away and my rsd lite and phone.. not connecting errors..start smartphone over or retry.. put 611.211 on flash drive put it on memory card and fails when flashing through recovery mode.. weird thing backup is there but its like empty.. thinking if i had restore i might be able to.. but i go to backup and 8152012 is there but when you press it its empty doesnt do nething..im at my wits end.. ive fixed past phones before but getting frusterated..please help
Click to expand...
Click to collapse
Ate you using Safestrap? If so just bout into recovery and disable safe system yuen your stock. Or just flash eclipse again without the patch.
Sent from my DROID RAZR using xda app-developers app
PAZZ632 said:
Can someone help me get me out of recovery?? was running 4.04 ICS Razr Maxx.. rooted..flashed.. eclipse rom 1.3.. patched with gsm even though Im cdma.. thought i had to do it.. flashed but then text messege stopping pop ups..no 4g cant get into phone wont go through google just keeps going back to start screen english etc...tried fast boot file fails right away and my rsd lite and phone.. not connecting errors..start smartphone over or retry.. put 611.211 on flash drive put it on memory card and fails when flashing through recovery mode.. weird thing backup is there but its like empty.. thinking if i had restore i might be able to.. but i go to backup and 8152012 is there but when you press it its empty doesnt do nething..im at my wits end.. ive fixed past phones before but getting frusterated..please help
Click to expand...
Click to collapse
Droid RAZR utility 1.8.1 use option 1
Sent from my DROID RAZR using xda premium
Afternoon,
Well today i got a coworkers phone that he will be switching to when his new card comes in so i tried using RSDLite to flash back to .211 stock ICS (phone was on ICS but had old bootloader and such from previous owner) I had files from RSD and such from when i did this to my phone so that way i could jump to JB [had no issues] I ran RSD and said 100% complete PASS etc but it still wont leave boot loop? cant figure out why i would boot loop from rsd.
Did step by step...
reboot phone into Fast boot,
Run RSD,
Load zip file, decompress and flash
100% it auto reboots phone than wont boot past animation.
model: XT912
On RSDlite 5.7
Filename: VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml <- file i use to flash
Creation Date: 06/14/2012 21:10:20
File size: 1818
Sofware Version: 6.7.2-180_DHD-16_M4-31
For Phone Model: SPYDER
I have searched numerous posts and couldn't find an answer in which relates, besides make sure for CDMA instead of GSM,
If someone could point me in the right direction i would greatly appreciate it.
TRY WIPE THE DATA AND CACHE IN RECOVERY.
Sent from my XT910 using xda app-developers app
dxl880517 said:
TRY WIPE THE DATA AND CACHE IN RECOVERY.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Dumb phone wouldnt get into recovery with the list the first time i went in there, retried and got in, working.. do greatly appreciate it! just now to get it to JB rom'd before his SIM card gets in, greatly appreciate it.
once i look into if a new JB release is out etc, got the originaly leak from just before christmas.
Blur_Version.6.16.211.XT912.Verizon.en.US <- is what file i have if its most current, got it last month sometime
(AP Fastboot Flash Boot (s) (recipe failure)) So I pulled a nooby move and tried to flash back to ICS from the official Jelly Bean. I then again pulled a stupider move and used RSD to flash gingerbread. The one thing that is confusing me though is the fact that my AP fastboot menu doesn't read flash failure, but recipe failure. I have attempted the jellybean unbricker from matigrof and then went so far as to boot into recovery, wipe the cache, wipe the data, and to install the jellybean leak. I am getting frustrated, and a tip in the right direction would be help.
Since you've moved to JB there's no way back to Ics or Gb.
You have to flash a JB firmware to ur device. Is it a Droid Razr Maxx from verizon or what?
Sent from my XT910 using xda premium
Its a Verizon Razr Maxx (912).
Does someone have the sbf?
I am in the same situation - did you figure it out?
Hi All,
I have a Droid Razr Maxx (Verizon) which was on 4.1.2 OTA update. I tried to edit the build.prop and messed up. The phone turns on to the Red Moto logo, later goes into the typical Droid Razr graphics and is stuck there for ever (Stuck on Booting?). I am able to enter into recovery, thankfully.
Now can anyone suggest a way to flash only the build.prop to restore it?
Else, can you point me to stock XT912M 4.1.2 so that I can flash getting into recovery?
Or is there is a better way that I could get out of this mess?
Many thanks in advance.
Regards,
Sid
I found this, but it is for Sony.
http://forum.xda-developers.com/showthread.php?t=2212168
Something similar to this would be very helpful !
Regards,
Sid
sidswami said:
Hi All,
I have a Droid Razr Maxx (Verizon) which was on 4.1.2 OTA update. I tried to edit the build.prop and messed up. The phone turns on to the Red Moto logo, later goes into the typical Droid Razr graphics and is stuck there for ever (Stuck on Booting?). I am able to enter into recovery, thankfully.
Now can anyone suggest a way to flash only the build.prop to restore it?
Else, can you point me to stock XT912M 4.1.2 so that I can flash getting into recovery?
Or is there is a better way that I could get out of this mess?
Many thanks in advance.
Regards,
Sid
Click to expand...
Click to collapse
you might want to try using rsd to fully restore the phone. That would also fix your issue. I have done this lots of times. Before you start make sure your phone is charged. Or you will have to buy a USB cable that allows the phone to work with the computer with out charging.
Sent from my XT912 using Tapatalk
In order to flash only build.prop you need to be able to start an adb session and then push the file, or use aroma which executes after boot menu manager so it is not a choice since you can't pass from red logo.
Easier way is rsd flashing a service rom so it will not delete so many files.
Sent from my XT910 using xda app-developers app
Resolved.
tydiamond11 said:
you might want to try using rsd to fully restore the phone. That would also fix your issue. I have done this lots of times. Before you start make sure your phone is charged. Or you will have to buy a USB cable that allows the phone to work with the computer with out charging.
Sent from my XT912 using Tapatalk
Click to expand...
Click to collapse
angrist said:
In order to flash only build.prop you need to be able to start an adb session and then push the file, or use aroma which executes after boot menu manager so it is not a choice since you can't pass from red logo.
Easier way is rsd flashing a service rom so it will not delete so many files.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Used RSD and flashed stock ROM 4.1.2.
Worked perfectly! Thanks all. :victory:
I got the stock ROM from here.
http://sbf.droid-developers.org/
It has links for all Motorola devices and for all versions. Hope it will be helpful.
sidswami said:
Used RSD and flashed stock ROM 4.1.2.
Worked perfectly! Thanks all. :victory:
I got the stock ROM from here.
http://sbf.droid-developers.org/
It has links for all Motorola devices and for all versions. Hope it will be helpful.
Click to expand...
Click to collapse
Great! Glad you did it . Have a great time working with your phone now that it is fixed.