Related
Hello Everyone,
I badly need help on my Huawei Honor U8860 phone. I have recently updated it from 2.3.6 to 4.03 over WIFI and the update went smoothly. So now here is what my phone have:
Kernel Version: 3.0.8-perf-00059-g3a757a2 [email protected] #1
Build Number: U8860IV100R001C00B923SP01
I have not rooted the phone at this time. It was working fine until 2 days ago when I started getting messages on the screen like:
"Unfortunately, 2D Home has stopped"
"Unfortunately, Google Play has stopped"
"Unfortunately, Contacts has stopped"
"Unfortunately, Settings has stopped"
"Unfortunately, Google Play Music has stopped"
"Unfortunately, Browser has stopped"
And so on, and so forth. It seems that all apps and processes have stopped when I try to use them so I literally can't use the phone. I went through several threads here just trying to restore my phone back to a
working state. I tried to do the following in order but without success:
1.) Factory data reset / erase everything - the phone boots to the recovery menu then it formats the /Data, /Cache and /HWUserData then it reboots. After reboot, the phone is back to where it was before the factory data reset with everything in it including downloaded apps.
2.) Manually uninstalled all downloaded apps. Removed screen lock (just to see if phone behavior changes). Then rebooted the phone but after reboot, all the apps are still installed and the screen lock is back as well.
3.) I tried to Force Update with the following official ROMs: B886, B919 and B923 but I always get the message "Update failed" during the update process.
4.) I downloaded the file "recovery-u8860-en.img" so I can replace the "recovery.img" file . Rebooted the phone w/ the pink screen and connected it to my PC but there is no USB mass storage device mounted.
5.) Finally, I tried to root the phone. I enabled USB debugging. I installed the ADB drivers then I downloaded the U8860 root tools and rootexplorer.apk. When I ran the "root-me.cmd", it tried to copy some files to the phone but it failed. The error was "read-only file system".
So it seems that the problem is because of the "read-only filesystem". I does not permit/allow any changes made to the phone. Can you help me restore my phone?
Please.. Can somebody help me on this?
Thanks, clint2rose
clint2rose said:
Please.. Can somebody help me on this?
Thanks, clint2rose
Click to expand...
Click to collapse
I still did not find any solution for my problem. I read from this thread that all ICS versions can be downgraded.
http://forum.xda-developers.com/showthread.php?t=1552038&page=232
Is there a way to downgrade from B923 to B919? I think this will solve the problem I'm facing.
clint2rose said:
I still did not find any solution for my problem. I read from this thread that all ICS versions can be downgraded.
http://forum.xda-developers.com/showthread.php?t=1552038&page=232
Is there a way to downgrade from B923 to B919? I think this will solve the problem I'm facing.
Click to expand...
Click to collapse
try to back-up some of the data form the partitions that are full on your phone and delete them, maybe afterwards the stock-rom-flashing procedure will work again.
kaefert said:
try to back-up some of the data form the partitions that are full on your phone and delete them, maybe afterwards the stock-rom-flashing procedure will work again.
Click to expand...
Click to collapse
thanks for the reply. it did not work. I even formatted the internal SD. Re-run the firmware update but it failed. when i boot the phone, all the contents of the internal SD remains intact. any other suggestion?
I can remember there was some talk of "downgrade patches" to flash before official ROMs if downgrades failed
http://forum.xda-developers.com/showpost.php?p=36819830&postcount=2312
http://forum.xda-developers.com/showpost.php?p=36117718&postcount=2228
http://forum.xda-developers.com/showpost.php?p=35376103&postcount=2104
http://forum.xda-developers.com/showpost.php?p=34105274&postcount=1865
http://forum.xda-developers.com/showthread.php?p=32996711&highlight=patch#post32996711
working download linka (just tested them) -->
https://docs.google.com/file/d/0B4MkDBK_iI-gWEoyaWpEekRXT00/edit
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE5Nzg=
kaefert said:
I can remember there was some talk of "downgrade patches" to flash before official ROMs if downgrades failed
http://forum.xda-developers.com/showpost.php?p=36819830&postcount=2312
http://forum.xda-developers.com/showpost.php?p=36117718&postcount=2228
http://forum.xda-developers.com/showpost.php?p=35376103&postcount=2104
http://forum.xda-developers.com/showpost.php?p=34105274&postcount=1865
http://forum.xda-developers.com/showthread.php?p=32996711&highlight=patch#post32996711
working download linka (just tested them) -->
https://docs.google.com/file/d/0B4MkDBK_iI-gWEoyaWpEekRXT00/edit
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE5Nzg=
Click to expand...
Click to collapse
I downloaded the files from both links. Can you tell me how to flash my current ROM? Because when I tried to use the file like a regular ROM (I created dload folder then put UPDATE.APP in the folder, then ran firmware update.. the update failed)..
clint2rose said:
I downloaded the files from both links. Can you tell me how to flash my current ROM? Because when I tried to use the file like a regular ROM (I created dload folder then put UPDATE.APP in the folder, then ran firmware update.. the update failed)..
Click to expand...
Click to collapse
what do you mean by flashing your current ROM? Just like any other stock ROM put the dload folder on the sd-card and start the update procedure either from the settings menu or via the boot-key-combination.
Yes the way you discribed is the correct one for flashing those patches, If those patches also don't work, I'm out of ideas, sorry.
kaefert said:
what do you mean by flashing your current ROM? Just like any other stock ROM put the dload folder on the sd-card and start the update procedure either from the settings menu or via the boot-key-combination.
Yes the way you discribed is the correct one for flashing those patches, If those patches also don't work, I'm out of ideas, sorry.
Click to expand...
Click to collapse
Thank you once more for your time. Most of the thread I read regarding these patches often used the phrase" you have to flash the current version of your ROM using the patch"...
And yes I created dload folder, place the UPDATE.APP and put it on the sdcard. I turned off the phone and removed the battery. Then I pressed vol+ vol- and power on/off button. The firmware update went to about 70% installing before displaying update failed.
I guess I will have to bring my phone to a repair center. My only problem is that there is no Huawei service center at my place (I reside here in Saudi Arabia). I got the phone as a free device on a broadband package and the warranty is already expired. I'm a little worried to take the phone to the small mobile repair shops as they might screw up the phone even more. Huawei is not a popular device here unlike iPhone, HTC and Samsung Galaxy.
As I understood that your device is rooted, you should get some custom ROM and try to install it.
okty2k said:
As I understood that your device is rooted, you should get some custom ROM and try to install it.
Click to expand...
Click to collapse
No, my device is not rooted. I tried to root it but I get the message "failed to copy file: Read-only file system".
clint2rose said:
No, my device is not rooted. I tried to root it but I get the message "failed to copy file: Read-only file system".
Click to expand...
Click to collapse
you don't need to be rooted, you only need to have a custom recovery deployed (which you can either do with root permissions, or by using the pink screen method, but some newer stock roms (you said your on 932 or something? last non-locked working is b919) this has been locked and the device will not boot if the kernel or the recovery image has been manipulated.
I think you will have to find some (huawei-certified!) repair-center, small do-it-all phone-shops probably won't be able to take care of this problem for you.. I'm sorry but I don't see any other solution
kaefert said:
you don't need to be rooted, you only need to have a custom recovery deployed (which you can either do with root permissions, or by using the pink screen method, but some newer stock roms (you said your on 932 or something? last non-locked working is b919) this has been locked and the device will not boot if the kernel or the recovery image has been manipulated.
I think you will have to find some (huawei-certified!) repair-center, small do-it-all phone-shops probably won't be able to take care of this problem for you.. I'm sorry but I don't see any other solution
Click to expand...
Click to collapse
Ok. I will try to find a repair-center experienced in Huawei devices. I have one last question if you don't mind. Is it possible to erase everything on the phone? As in completely erase or reformat after which there will not be an operating system on the phone. I read in some threads that this is possible w/ custom recovery but I want to know if it is also possible for phones without the custom recovery. I'm hoping there might be some tool or something..
U8860 not responding
clint2rose said:
Ok. I will try to find a repair-center experienced in Huawei devices. I have one last question if you don't mind. Is it possible to erase everything on the phone? As in completely erase or reformat after which there will not be an operating system on the phone. I read in some threads that this is possible w/ custom recovery but I want to know if it is also possible for phones without the custom recovery. I'm hoping there might be some tool or something..
Click to expand...
Click to collapse
Have you find the solution yet? I have the same problem. Somehow my phone system is "locked". I can't install or uninstall app. Some google apps keep showing not responding. Everything changes i made, keep showing up after the phone rebooted.
This was happen a few days after I upgrade to ICS B932SP01 and rooted my phone (to remove original chinese apps).
Luckily i have friend in huawei indonesia. He gave my u8860 to the technical support. But the result was no good.
They try everything, even install my phone with the original GB and always failed.
The last suggestion is change the phone machine, which is as same as buy a new phone.
I really appreciate is someone can help me here...
Thanks
Apologies but i am out of my depth and need some support. I have a Galaxy S3 and decided to root it as I can't resist looking for useful tweaks. I rooted it fine but only then realised that our good friends at Sky had barred me from using Sky Go. This was more important to me than the tweaks so I followed some web instructions on unrooting. Again, this seems to have been successful as tests and trying to use root apps fail. If I try to re-unroot, I am told that I am not rooted but here's the rub, Sky still says I am rooted!. As a last resort, I decided to do a factory re-set and before loading anything else, load Sky Go to see if the problem was solved.
As the restore began, I noticed a screen that I think was something to do with TWRP - I noticed that the words WIN.... were in the title and here was a recovery message. The screen was made up of blue graphics. The reset continued but without anything else loaded, Sky Go still said I was rooted. I can only assume that at some point during the root and un-root, the ROM was flashed with this other tool and it is this that is being detected by Sky Go. Am I right?
So, I would really appreciate some assistance as to how to get back to un-rooted stock ROM with no extras!
Any help gratefully received!
Thanks
Maybe just use something like this:
https://play.google.com/store/apps/details?id=com.marutian.quickunroot
that's probably the solution for an app that doesn't work on a rooted device (I have the same issue with a local dutch tv provider app, solved with the mentioned app)
The other option (since removing SU from your current rom kinda failed) is flashing a new ROM with TWRP, just find a zip file for a ROM without SU/root
prulleman said:
Maybe just use something like this:
https://play.google.com/store/apps/details?id=com.marutian.quickunroot
that's probably the solution for an app that doesn't work on a rooted device (I have the same issue with a local dutch tv provider app, solved with the mentioned app)
The other option (since removing SU from your current rom kinda failed) is flashing a new ROM with TWRP, just find a zip file for a ROM without SU/root
Click to expand...
Click to collapse
Thanks - The Quick Unroot option doesn't work as it can't find an SU binary file - 'spose it's because it's not rooted!
I flashed a new ROM (using ODIN) but I think that the recovery screen mentioned before and which appears at the strt of the re-set has also been added to the ROM and is the only thing I can think of that's causing this.
More suggestions please!
Hi,
Try as I may. I cant unlock my Tablet Z LTE (SGP321) bootloader.
Im using FlashTool 0.9.18.4 and am currently on stock KK 4.4.4. firmware (SGP321_10.5.1.A.0.283_CE.ftf)
Everytime I try to ulock the bootloader it fails with FlashTool message that drivers need to installed
I've trird installing the drivers via the \FlashTool\Drivers directory.......but always get the following message "DPInst.exe doe not execute on your current operating system" - I'm running Windows 7 Ultimate 64bit
Any and all help would be greatly appreciated as I'm desperate to install CM KK 4.4.4 and get rid of the Sony stuff.
Thanks in advance
_____________________________
Sony Xperia Tablet Z LTE/WIFI SGP321
vybztymz said:
Hi,
Try as I may. I cant unlock my Tablet Z LTE (SGP321) bootloader.
Im using FlashTool 0.9.18.4 and am currently on stock KK 4.4.4. firmware (SGP321_10.5.1.A.0.283_CE.ftf)
Everytime I try to ulock the bootloader it fails with FlashTool message that drivers need to installed
I've trird installing the drivers via the \FlashTool\Drivers directory.......but always get the following message "DPInst.exe doe not execute on your current operating system" - I'm running Windows 7 Ultimate 64bit
Any and all help would be greatly appreciated as I'm desperate to install CM KK 4.4.4 and get rid of the Sony stuff.
Thanks in advance
_____________________________
Sony Xperia Tablet Z LTE/WIFI SGP321
Click to expand...
Click to collapse
don't use flashtool for unblocking BL (cause you can use instruction from Sony's site), or install drivers properly: look for dpinst.exe in your temp folder and set compability mode with WinVista in it's properties and it will install properly.
Rootk1t said:
don't use flashtool for unblocking BL (cause you can use instruction from Sony's site), or install drivers properly: look for dpinst.exe in your temp folder and set compability mode with WinVista in it's properties and it will install properly.
Click to expand...
Click to collapse
Thanks for your reply/suggestion. Unfortunately I do not have the "set compatibility" option in DPInst.exe properties. I have found 2 x dpinst.exe and 2 x dpinst64.exe files on my system.
I've tried using the Sony site instructions but
1. When i attch the tablet to my laptop in Fastboot mode (Vol up), and type "fastboot devices" at the cmd prompt, i dont get any indication that my tablet has been/is recognised (see scrrenshot 1)
2. When I run the unlock command using the unlock code obtained from Sony, command line sticks at "waiting for device" (screenshot 2)
i'm at a loss as to whats wrong \ what Im doing wrong
All / any suggestions welcomed as am desperate to install CM11/12.
Thanks in advance
Vybz
vybztymz said:
Thanks for your reply/suggestion. Unfortunately I do not have the "set compatibility" option in DPInst.exe properties. I have found 2 x dpinst.exe and 2 x dpinst64.exe files on my system.
I've tried using the Sony site instructions but
1. When i attch the tablet to my laptop in Fastboot mode (Vol up), and type "fastboot devices" at the cmd prompt, i dont get any indication that my tablet has been/is recognised (see scrrenshot 1)
2. When I run the unlock command using the unlock code obtained from Sony, command line sticks at "waiting for device" (screenshot 2)
i'm at a loss as to whats wrong \ what Im doing wrong
All / any suggestions welcomed as am desperate to install CM11/12.
Thanks in advance
Vybz
Click to expand...
Click to collapse
Check that your tablet's fastboot drivers are installed correctly in device manager on windows. I haven't done this on the tablet z (yet), but if you do not have the drivers installed on a nexus you wont see any device in the fastboot devices option.
So i would suggest you download the correct drivers (preferably from sony, but google drivers might also work), and check that the device manager dont have any unknown devices (tablet z) and if you do not try reinstalling the driver by uninstalling the current one and getting the correct one from sony or the google drivers.
marcusorwen said:
Check that your tablet's fastboot drivers are installed correctly in device manager on windows. I haven't done this on the tablet z (yet), but if you do not have the drivers installed on a nexus you wont see any device in the fastboot devices option.
So i would suggest you download the correct drivers (preferably from sony, but google drivers might also work), and check that the device manager dont have any unknown devices (tablet z) and if you do not try reinstalling the driver by uninstalling the current one and getting the correct one from sony or the google drivers.
Click to expand...
Click to collapse
Thanks - you were right, it was drivers. Finally managed (I think) to unlock bootloader.........but am now stuck in a bootloop .
Any suggestions welcomesed
Use flashtool and simply flash any stock version on top.
Alternatively, you can use some non stock ROM, but for that your first need to install the custom recovery via fastboot.
vybztymz said:
Any suggestions welcomesed
Click to expand...
Click to collapse
Have a look at this guide for installing a CM ROM
vybztymz said:
Thanks - you were right, it was drivers. Finally managed (I think) to unlock bootloader.........but am now stuck in a bootloop .
Any suggestions welcomesed
Click to expand...
Click to collapse
If your stuck in a bootloop i would suggest trying and flash recovery through flashtools and see if you can clear dalvik cache in the custom recovery.
it might help.
but otherwise do as the others say and flash a custom rom (CM preferably).
Lost Root after installing CN12 Nightly (Lollipop 5.0x)
marcusorwen said:
If your stuck in a bootloop i would suggest trying and flash recovery through flashtools and see if you can clear dalvik cache in the custom recovery.
it might help.
but otherwise do as the others say and flash a custom rom (CM preferably).
Click to expand...
Click to collapse
hanks for you help.
I have rooted and unlocked the boot loader of my SGP321 (WiFi/LTE).
But every time I install CM12 (flashed zip via TWRP), I lose Root......and as far as I can see, there's no way back from that, bar a complete re-install of stock (KK444)
Really frustrated as have wanted to flash CM and get rid of the Sonly bloatware (example: of 2gb internal memory, the stock firmware leaves only c.500mb free....thats just plain ridiculous. Compared to CM12 which leaves 1.7 GIGS free.
any suggestions.......?
vybztymz said:
hanks for you help.
I have rooted and unlocked the boot loader of my SGP321 (WiFi/LTE).
But every time I install CM12 (flashed zip via TWRP), I lose Root......and as far as I can see, there's no way back from that, bar a complete re-install of stock (KK444)
Really frustrated as have wanted to flash CM and get rid of the Sonly bloatware (example: of 2gb internal memory, the stock firmware leaves only c.500mb free....thats just plain ridiculous. Compared to CM12 which leaves 1.7 GIGS free.
any suggestions.......?
Click to expand...
Click to collapse
CM12 should have root built in, check developer options for it on your device.
If not then just flash SuperSU.zip from chainfire (i prefer chainfire's version of super user).
Chainfire's SuperSU is here: http://forum.xda-developers.com/showthread.php?t=1538053
please note that i have not tested this on a Tab Z but it should work.
marcusorwen said:
CM12 should have root built in, check developer options for it on your device.
If not then just flash SuperSU.zip from chainfire (i prefer chainfire's version of super user).
Chainfire's SuperSU is here: http://forum.xda-developers.com/showthread.php?t=1538053
please note that i have not tested this on a Tab Z but it should work.
Click to expand...
Click to collapse
Thanks for the speedy reply. Really appreciated. I've gone intp developer options.....but what am i looking for?
[EDIT] In Developer Options, and under "Root Access" it says "Disabled"
[EDIT 2] Downloaded a RootChecker and it tells me I'm not rooted
I'm totally frustrated.....have been trying to install CM12 for the last 6 hours!!!!
NUT (duallockedrecovery) has done a fantastic job developing the xzdr.........but i have to say that, in common with a lot of devs.... not very good at writing nstructions.
I'm an IT manager and often train staff in systems etc, including writing user guides. When writing guides/instructions, I ALWAYS assume that the end user KNOWS NOTHING......and so the guides/etc are very detailed. Yes, it takes a while to write them, but feedback shows its the right track to take.
Almost all the articles on flashing CM12/using Fastboot etc lack small, but important, details......!!! I'm still not really sure if i should be using TabZ-lockeddualrecovery or XZ-lockeddualrecovery..........!!!!!!
i've got as far as I have by pulling together numerous XDA posts in order to get a (full'ish) picture of what to do. Devs, pls make your instructions clearer for people who aren't devs. Rant over
My current position is that my Xperia Tablet Z is
1. On KitKat 444 (Firmware ver. 283)
2. Rooted
3. Bootloader unlocked
4. SuperSU & SuperSu Pro installed
How do i get from this position to a successful CM12 install?
I have CM12 Nightly (7th May), GApps 5.0x Minimal ready and waiting....
I'm not a stupid person, but trying to do this has made me feel like a complete idiot.....help!!!
vybztymz said:
Thanks for the speedy reply. Really appreciated. I've gone intp developer options.....but what am i looking for?
I'm totally frustrated.....have been trying to install CM12 for the last 6 hours!!!!
NUT (duallockedrecovery) has done a fantastic job developing the xzdr.........but i have to say that, in common with a lot of devs.... not very good at writing nstructions.
I'm an IT manager and often train staff in systems etc, including writing user guides. When writing guides/instructions, I ALWAYS assume that the end user KNOWS NOTHING......and so the guides/etc are very detailed. Yes, it takes a while to write them, but feedback shows its the right track to take.
Almost all the articles on flashing CM12/using Fastboot etc lack small, but important, details......!!! I'm still not really sure if i should be using TabZ-lockeddualrecovery or XZ-lockeddualrecovery..........!!!!!!
i've got as far as I have by pulling together numerous XDA posts in order to get a (full'ish) picture of what to do. Devs, pls make your instructions clearer for people who aren't devs. Rant over
My current position is that my Xperia Tablet Z is
1. On KitKat 444 (Firmware ver. 283)
2. Rooted
3. Bootloader unlocked
4. SuperSU & SuperSu Pro installed
How do i get from this position to a successful CM12 install?
I have CM12 Nightly (7th May), GApps 5.0x Minimal ready and waiting....
I'm not a stupid person, but trying to do this has made me feel like a complete idiot.....help!!!
Click to expand...
Click to collapse
Yea i know what you mean by guides not being written to include alot of details and missing out on small stuff that might be important, but anyway.
In the Developer Options there should be a box called Root Access, and it should be defaulted to Disabled ones you have installed CM12 for the first time, its just a matter of enabling this.
Im guessing you already know how to enable Developer Options, but if you dont here is how:
Go to About Device (or Phone/Tablet) and click on Build number a bunch of times (i think its 5-6 times), and the developer options should be visible in the settings.
If that dosent work you might want to try and flash the SuperSU binary through recovery, the zip to use is the one found in chainfires xda-thread here: http://forum.xda-developers.com/showthread.php?t=1538053
But here is the direct link for the zip https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Just put that on your device internal memory (or SD-Card) and flash it in your recovery of choice, it should work in CWM, TWRP and Odin (but you dont have a samsung so the last one dosent matter).
This should install the SuperSU app, and its basic su binary onto your CM12 rom.
In both cases i would recommend you install root checker (https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck) and see if root is available to you.
Also to note is that the Root Access option built into CM12 isnt that customizable and i would still recomend you install SuperSU, but if the Root Access option is working you can just download the SuperSU application from the play store and let it install SU binary and then you can disable CM12's built in root option ones you make sure the SuperSU was installed correctly.
Thanks so much for your help/patience......but i'm afraid im giving up (for now).
Will try again in a few days......so its back to rooted stock 444
By the way, why have CM decided to go with their own (as good as useless) recovery????
I forgot to say that you've helped fill in a few more gaps for me in respect of this i.e. flashing SU; changing Root Access in Dev. Options etc.
These are the things that all the articles ive read FAILED to mention.
Thanks so much
vybztymz said:
I forgot to say that you've helped fill in a few more gaps for me in respect of this i.e. flashing SU; changing Root Access in Dev. Options etc.
These are the things that all the articles ive read FAILED to mention.
Thanks so much
Click to expand...
Click to collapse
No problem, if you have any other questions just tell me and i might be able to help you
I have also been in the dark about this stuff before, and im still not used to other manufacturers style of rooting and unlocking the bootloader (sony is the next best after Nexus) since samsung and the others usually you have a harder time unlocking and rooting.
But good luck if you try it again :victory:
Hi all!
I'm new here, so please instruct me if I'm doing anything wrong.
I have a Coolpad Y82-820. It's a Chinese phone, I think.
I'm in the process of getting it rooted. ---- Was rooted before, but an update on their side (to CoolUI V24. [phone model#]. 160407) removed the root and now makes it a bit difficult to root at the moment, though I'm sure it will be done eventually. For those who have this phone, I'd suggest not to update, as this update deletes any rooting applications installed on reboot/restart.
Once rooted, I don't really mind waiting, I would like to put a Custom Rom on this phone, but not sure what options are available. I see posts about the Coolpad Note/Dazen/Shine/Rogues etc. Though nothing about this one, though spec wise it's not too far off from the others.
I'd be grateful if anyone could help with confirmations, information, on how to select a correct custom rom for this device and the steps to do. Also if there's any info on how to root this current version, even better.
Thanks!
Some details of the phone below:
Model Number
Coolpad Y82-820
CPU
Qualcomm Technologies, Inc MSM8916 Quad-core 1.2 GHz
RAM
2G
Internal memory
Total 8G
Resolution
960 * 540
Android version
4.4.4
Kernel version
3.10.28
[email protected] #1
Thu Apr 7 17:01:56 CST 2016
Build number
4.4.005.150730.Y82_820
Any help possible?
Rooting maybe? Even possibly downgrading would be an option.
Johny2k9 said:
Any help possible?
Rooting maybe? Even possibly downgrading would be an option.
Click to expand...
Click to collapse
Did you try towelroot?It's best for rooting Kitkat.https://towelroot.com/
Røbin said:
Did you try towelroot?It's best for rooting Kitkat.https://towelroot.com/
Click to expand...
Click to collapse
Gave it a shot. Failed, as well. I've tried most of the popular rooting apps. King Root, Kingo, One click, and so on as well as a few Chinese rooting apps, as well. They've all failed.
The previous version was rooted with King Root though.
Johny2k9 said:
Gave it a shot. Failed, as well. I've tried most of the popular rooting apps. King Root, Kingo, One click, and so on as well as a few Chinese rooting apps, as well. They've all failed.
The previous version was rooted with King Root though.
Click to expand...
Click to collapse
In that case you have to root your phone manually by unlocking bootloader.But as a Chinese phone don't need to unlock bootloader.But you need to have a recovery that can install flashable zip.Most of this phone have built in recovery.You can go to recovery by turning off your phone and press power+volume down button.Then see if there's any option to install zip.
Røbin said:
In that case you have to root your phone manually by unlocking bootloader.But as a Chinese phone don't need to unlock bootloader.But you need to have a recovery that can install flashable zip.Most of this phone have built in recovery.You can go to recovery by turning off your phone and press power+volume down button.Then see if there's any option to install zip.
Click to expand...
Click to collapse
There is an option there to install zip files. Though I do not know the process well of doing so. Most zips I have tried have failed. I did install GMS several days ago using the install zip method. Not certain if that was a good idea though...
If I can find a flashable zip then I wouldn't mind giving it a try. I've restored this phone countless times hoping to go back to factory firmware, but that doesn't seem to be the case. It seems to go back to the most recent updated OTA which makes it unable to root with regular apps at the moment.
Not sure what the closest phone model for this phone would be. If you have ideas I'm willing to give them a shot an report back in with any findings.
Johny2k9 said:
There is an option there to install zip files. Though I do not know the process well of doing so. Most zips I have tried have failed. I did install GMS several days ago using the install zip method. Not certain if that was a good idea though...
If I can find a flashable zip then I wouldn't mind giving it a try. I've restored this phone countless times hoping to go back to factory firmware, but that doesn't seem to be the case. It seems to go back to the most recent updated OTA which makes it unable to root with regular apps at the moment.
Not sure what the closest phone model for this phone would be. If you have ideas I'm willing to give them a shot an report back in with any findings.
Click to expand...
Click to collapse
https://download.chainfire.eu/696/supersu/ go to this link,download UPDATE-SuperSU-v2.46.zip and install it.This is the way to have root manually.
Røbin said:
https://download.chainfire.eu/696/supersu/ go to this link,download UPDATE-SuperSU-v2.46.zip and install it.This is the way to have root manually.
Click to expand...
Click to collapse
I got an error:
正在查找更新包
正在打开更新包
正在验证更新包
E : failed to verify whole-file signature
E : signature verification failed 安装失败
我会汉语一点儿，所以这个汉字我都明白了，如果你有问题我可以试一试告诉你。 My Chinese isn't too bad, so if there's something you don't understand let me know.
Letting you know the steps I did, just in case I did it wrong.
- Downloaded the UPDATE-SuperSU-v2.46.zip
- Placed it on the phone internal memory (recovery only recognizes internal)
- Powered off
- Went into recovery mode
- Then tried installing the file.
Then the mentioned error.
Should I have restored the phone to the most recent OTA, cleared cache, data, first etc?
Johny2k9 said:
I got an error:
正在查找更新包
正在打开更新包
正在验证更新包
E : failed to verify whole-file signature
E : signature verification failed 安装失败
我会汉语一点儿，所以这个汉字我都明白了，如果你有问题我可以试一试告诉你。 My Chinese isn't too bad, so if there's something you don't understand let me know.
Letting you know the steps I did, just in case I did it wrong.
- Downloaded the UPDATE-SuperSU-v2.46.zip
- Placed it on the phone internal memory (recovery only recognizes internal)
- Powered off
- Went into recovery mode
- Then tried installing the file.
Then the mentioned error.
Should I have restored the phone to the most recent OTA, cleared cache, data, first etc?
Click to expand...
Click to collapse
Ok i'll give you a last solution to root your device.
first go to this linkhttp://www.file-upload.net/download-7267586/usb_driver.rar.html and download the driver file and extract the file.Now first enable developer options in your phone to enable usb debug and connect your phone to pc.In your pc right click on Computer/My PC icon and go to manager.click device manager and you will see your connected device.Now click on your device and find install driver,go and find the extracted file to install driver.After installing driver download root genius from this linkhttps://mega.nz/#!G4US0aTA!rfkmf4GSUJ75FSpq3_OBzKw58WLlExImjzlHVti5rbM,Install it and open the app.Your device will automaticlly connect to root genius.Now the final step is to click root word,click the green box,wait for 10 minute to complete the rooting process.your phone will reboot.all done.now check your device if its rooted or not by installing root checker app via google play store.
Røbin said:
Ok i'll give you a last solution to root your device.
first go to this linkhttp://www.file-upload.net/download-7267586/usb_driver.rar.html and download the driver file and extract the file.Now first enable developer options in your phone to enable usb debug and connect your phone to pc.In your pc right click on Computer/My PC icon and go to manager.click device manager and you will see your connected device.Now click on your device and find install driver,go and find the extracted file to install driver.After installing driver download root genius from this linkhttps://mega.nz/#!G4US0aTA!rfkmf4GSUJ75FSpq3_OBzKw58WLlExImjzlHVti5rbM,Install it and open the app.Your device will automaticlly connect to root genius.Now the final step is to click root word,click the green box,wait for 10 minute to complete the rooting process.your phone will reboot.all done.now check your device if its rooted or not by installing root checker app via google play store.
Click to expand...
Click to collapse
Also failed.
I guess it's too difficult to root this new version/update. If only I could downgrade then it might be possible to root.
Johny2k9 said:
Also failed.
I guess it's too difficult to root this new version/update. If only I could downgrade then it might be possible to root.
Click to expand...
Click to collapse
There's no available firmware to downgrade. Bad luck for you.
Røbin said:
There's no available firmware to downgrade. Bad luck for you.
Click to expand...
Click to collapse
Is upgrade impossible without rooting?
Johny2k9 said:
Is upgrade impossible without rooting?
Click to expand...
Click to collapse
You can upgrade or downgrade your android version without rooting but it has to be official firmware. If you want to flash custom rom you'll need custom recovery installed and unlocked bootloader.
Røbin said:
You can upgrade or downgrade your android version without rooting but it has to be official firmware. If you want to flash custom rom you'll need custom recovery installed and unlocked bootloader.
Click to expand...
Click to collapse
I wouldn't mind upgrading. Though what would be the process to get the official firmware?
Johny2k9 said:
I wouldn't mind upgrading. Though what would be the process to get the official firmware?
Click to expand...
Click to collapse
I think you didn't get what I said.You are already using updated android version. You can't update more if your service provider don't give anymore updates.And I also searched very hard to find official firmware for your device but unluckily your phone have very less information in web.So there's no one haven't uploaded any firmware or no discussion available for your device.You can though upgrade your device using custom rom but you need to have root and custom recovery .without root you can't install custom recovery.
Røbin said:
I think you didn't get what I said.You are already using updated android version. You can't update more if your service provider don't give anymore updates.And I also searched very hard to find official firmware for your device but unluckily your phone have very less information in web.So there's no one haven't uploaded any firmware or no discussion available for your device.You can though upgrade your device using custom rom but you need to have root and custom recovery .without root you can't install custom recovery.
Click to expand...
Click to collapse
Hahh... So after combing through various Chinese sites and using my limited knowledge of Chinese, I've got a ROM (previous version before there update), got the appropriate flashing software (CoolPad Download Assistant) and have successfully flashed it after disassembling the phone to get into fastboot.
Good news:
I am Rooted... again. With KingRoot.
Bad news:
The CoolPad has there update in the background. Found where it's stored and deleted. The Phone re-downloads the update.
A restart will probably update this phone making it un-rootable again.
Edit: Deleting the update file before immediately restarting gives an error in the update on restart, so I guess that's a good thing.
For now, I will just operate for now without turning the phone off. Though I do have the necessary files if I have to flash it again.
Rooting is the first requirement you mentioned... what do I need to do next? Download what? Compatible ROM's etc?
Johny2k9 said:
Hahh... So after combing through various Chinese sites and using my limited knowledge of Chinese, I've got a ROM (previous version before there update), got the appropriate flashing software (CoolPad Download Assistant) and have successfully flashed it after disassembling the phone to get into fastboot.
Good news:
I am Rooted... again. With KingRoot.
Bad news:
The CoolPad has there update in the background. Found where it's stored and deleted. The Phone re-downloads the update.
A restart will probably update this phone making it un-rootable again.
Edit: Deleting the update file before immediately restarting gives an error in the update on restart, so I guess that's a good thing.
For now, I will just operate for now without turning the phone off. Though I do have the necessary files if I have to flash it again.
Rooting is the first requirement you mentioned... what do I need to do next? Download what? Compatible ROM's etc?
Click to expand...
Click to collapse
If you have no interest in custom rom and now you can root your device then you don't need to do anything right now.And you are saying new update automatically downloading,just in download setting select "do not auto download"or"update via wifi only"this will prevent from auto downloading update.
Røbin said:
If you have no interest in custom rom and now you can root your device then you don't need to do anything right now.And you are saying new update automatically downloading,just in download setting select "do not auto download"or"update via wifi only"this will prevent from auto downloading update.
Click to expand...
Click to collapse
I disabled the update part, thank you.
I would prefer a custom rom, what options would I have?
Johny2k9 said:
I disabled the update part, thank you.
I would prefer a custom rom, what options would I have?
Click to expand...
Click to collapse
Not sure if there's any custom rom available for your phone You can somehow install custom twrp recovery but the main problem is custom rom availability.But I would suggest you to use xposed instead installing custom ROM.You can customize and control your device using xposed installer.
Røbin said:
Not sure if there's any custom rom available for your phone You can somehow install custom twrp recovery but the main problem is custom rom availability.But I would suggest you to use xposed instead installing custom ROM.You can customize and control your device using xposed installer.
Click to expand...
Click to collapse
Installed Xposed Installer, but the Download section is empty.
I am in China currently, so a lot of things may be blocked. A VPN should fix this, I believe.
What things I should install. Xposed Installer is new to me.
Dear All , this method maybe already here somewhere ,
i have tried to root this specific device and i ran into many issues !
but successfully i have done it .
i'll upload the patched file here and i'll mention what method i have done ! ..
unlock boot loader is a must . ( Please read about it in google , All Samsung devices is the same method )
u might repeat the process to times until it successfully unlocked and greyed-out !
Next download this firmware only to be able to run the patched AP .
un-tick Auto-reboot before flashing .
once flash done , power + Volume down to restart , then volume up with power until u boot into the recovery
wipe data . restart . done
to make sure u have done every thing correctly u'll see RED massage once u boot you're device
Firmware ( This is UAE Firmware " T725XXS1ATC5_T725OJM1ASJ3_XSG " ) All Languages included . Link
Patched AP File Link
Please Note that i'm not responsible if u break your Tablet ! .
Proof ( IMG )
GD day :angel:
after rooting is it possible to update firmware to a new one?
moresat said:
after rooting is it possible to update firmware to a new one?
Click to expand...
Click to collapse
No ! ..
Hi
Do I just need to use odin to flash the Firmware you mentioned then use ODIN again to flash the patched ap
I can just add that with this specific fw version and patched ap everything worked on LTE version but I might add my little deviations ...
1st original firmware flash (BL,AP,CP,CSC-non-home one) instantly followed by wipe data in recovery mode.
2nd After the initial setup + wifi connection I installed and updated magisk.
3rd "adb restart bootloader" (here i am not sure if it mattered but anyway) and flush again with the provided Patched AP File (BL,the_patched_AP,CSC - the home one this time ... using CP failed with modem err with me so I just skipped it here)
4th get trough the init setup again with wifi on and open magisk which will install more stuff.
The prerequisites still apply oem unlocked bootloader before you start and keep your battery at least 60-70% since the process drained mine a lot.
You know you are on the right track when you have warning with tablet bootloader is unlocked (at startup yellow) and tablet not running Samsung's official software (red after the first one)
Ive just bought this SM-T725 model android 11. There is no sign of OEM Unlock Bootloader under development. Does anyone know how I can unlock this.
chadandchew said:
Ive just bought this SM-T725 model android 11. There is no sign of OEM Unlock Bootloader under development. Does anyone know how I can unlock this.
Click to expand...
Click to collapse
The option only shows up when you are connected to the internet.
Thanks for reply mate, I got it figured. I also manage to get root and twrp recovery but not both at the same time. After flashing and using twrp recovery I then lose root after reboot and have to flash a patched magisk bundle over odin again. Bit inconvenient but I only intend using twrp now and then for backup/recovery.
Can you recommend a stable rom for this device - far too much google bloat on it for my liking. I tried latest lineage but found it unstable.
chadandchew said:
Thanks for reply mate, I got it figured. I also manage to get root and twrp recovery but not both at the same time. After flashing and using twrp recovery I then lose root after reboot and have to flash a patched magisk bundle over odin again. Bit inconvenient but I only intend using twrp now and then for backup/recovery.
Can you recommend a stable rom for this device - far too much google bloat on it for my liking. I tried latest lineage but found it unstable.
Click to expand...
Click to collapse
Just install LineageOS. Clean, no Bloat, everything smooth and you can have TWRP and Root/Magisk at the same time.
Depending on how much Google you want to have on your device, you might rather choose LOS+MG ( https://lineage.microg.org/) I can highly recommend it. You get rid of Google which debloats it even more and is a plus for your privacy but almost everything works (at leat for me. But migh depend on your needs)
If you like Google, just use normal LineageOS (https://lineageos.org) + GAPPS
Thanks for reply. Will try the LOS ROM later. Wish Google crap would disappear totally. I hate it enormously.
By the way which folder am I looking for on that LOS ROM download page
Ah gts4lv I presume
chadandchew said:
Wish Google crap would disappear totally. I hate it enormously.
Click to expand...
Click to collapse
then go for LOS+MG: https://download.lineage.microg.org/gts4lv/
topaza said:
then go for LOS+MG: https://download.lineage.microg.org/gts4lv/
Click to expand...
Click to collapse
Recently switched to using MicroG Lineage. Timely enough, MicroG passes the SafetyNet now as per the instructions mentioned below and indicated in the attached screenshot. For the fingerprint, I had selected the T720 from the list.
https://www.reddit.com/r/MicroG/comments/shmpng
Along with Aurora store installed as a service, I think you don't need Google anymore.
topaza said:
Just install LineageOS. Clean, no Bloat, everything smooth and you can have TWRP and Root/Magisk at the same time.
Depending on how much Google you want to have on your device, you might rather choose LOS+MG ( https://lineage.microg.org/) I can highly recommend it. You get rid of Google which debloats it even more and is a plus for your privacy but almost everything works (at leat for me. But migh depend on your needs)
If you like Google, just use normal LineageOS (https://lineageos.org) + GAPPS
Click to expand...
Click to collapse
I'm having some problem here:
I can install LineageOS, I can root/Magisk, I can have TWRP, but not all together at once.
Can you help me on how to do this?
Working on a SM-T725 of course, actually rooted, lineage and TWRP installed, but my Magisk can't install modules, it seems it doens't have root privileges.
Thanks in advance for your answer
anybody have an updated one, the file has been archived on the said link... thanks in advance