Hi I think I noobed up my phone and could really use some guidance...
Coming from CM9.1 to Stock based ROM.
I flashed global stock kernel .54 using flashtool...powered up my phone by mistake CM9 boot logo comes up, optimizes applications (only 6), then I get Message "unfortunately, the process com.android.phone has stopped." and the only thing I can do is hard reset and go through same process..CWM is gone..can't enter fast/flash boot mode...Only thing I can think of is to wait for power to die and try to enter fastboot...but not sure if it's good to try with dead battery...
What should I do
Well managed to get into flashmode just by timing the hard reset and connecting phone with volume down at correct time^^
Dude, if you come from CM to stock and you flashed stock you shouldnt have cwm and CM logo...
Put 54 stock rom in Flashtool/firmwares
Go to Flashtool, select the Tunder Icon and select flashmode, when prompted connect your Switched Off phone with vol up button and thats it.
CM and CWM will be gone.
I want to ask if one is coming frm cm9 to stock v only hv to flash the stock ftf!!
What about the kernel???
I m confused plzz help!!
Sent from my MT27i using xda premium
Not a n00b!! said:
I want to ask if one is coming frm cm9 to stock v only hv to flash the stock ftf!!
What about the kernel???
I m confused plzz help!!
Sent from my MT27i using xda premium
Click to expand...
Click to collapse
Stock kernel is included in stock rom, so its enough to flash rom via flashtool.
Related
Hello, i'm trying install custom roms MiniCM7-2.2.0 but when i install it, the phone reboot and only show sony ericsson and doesn't boot. I cant access to xrecovery. Whats wrong?
tomaskun said:
Hello, i'm trying install custom roms MiniCM7-2.2.0 but when i install it, the phone reboot and only show sony ericsson and doesn't boot. I cant access to xrecovery. Whats wrong?
Click to expand...
Click to collapse
You don't using nAa kernel right? To use Mini-cm7 2.2.0 you must use naa kernel
Sent from my U20i using xda premium
Like Elwino2.3 said you need to flash the nAa kernel using flashtool.
But before that you need to unlock your bootloader than flash the kernel.
Please re-read the thread carefully where you got the MiniCm7-2.2.0 ROM.
All necessary details are provided.
Don't worry it also happened to me. I got too confident coz i had flashed many other ROM's and so i just flashed the ROM without reading the instruction.
You either use Sony Ericsson Update Service to reset your phone back to the stock sony ericsson rom or you can try to directly flash the kernel.
As for myself i used the Update Service coz i thought that it was more safe.
tomaskun said:
Hello, i'm trying install custom roms MiniCM7-2.2.0 but when i install it, the phone reboot and only show sony ericsson and doesn't boot. I cant access to xrecovery. Whats wrong?
Click to expand...
Click to collapse
follow this http://forum.xda-developers.com/showthread.php?t=981935
after that, flash the kernel.. install rom via cwm
Your device is brick, you dont use the kernel try to unbrick the device and install the right kernel with the CWM recovery
Sent from my E10i using xda premium
Im using custom rom miui v4 in expeacer.. what should I do now? should I flash directly in flashtool now? or should I get back to .62 ftf? help me please
Well I'm not an expert or anything but I think that u can flash the ftf file whatever the Rom that u have. Anyone can second that?
The ftf contains the system+kernel. I think that it will work if u flash from custom rom
Sent from my SK17i using xda premium
i just flash now but I get "error flashing" make sure to turn on the usb debugging.. i already turn on my usb debugging and my driver is installed properly ..now my phone got stuck in sony logo...
hi friends.My NEO V is on 2.3.4 with software version 4.0.2.A.0.62.I unlocked bootloader and rooted my mobile successfully.I tried to flash an ics rom(xperia ultimate HD).I did flash it using aroma.When i tried to reboot phone it got struck at sony logo.I'm not able to enter recovery to restore my backup.Do i need to update my firmware version to .587 before flashing ics rom.If so how to do it?please help me..
dileepm29 said:
hi friends.My NEO V is on 2.3.4 with software version 4.0.2.A.0.62.I unlocked bootloader and rooted my mobile successfully.I tried to flash an ics rom(xperia ultimate HD).I did flash it using aroma.When i tried to reboot phone it got struck at sony logo.I'm not able to enter recovery to restore my backup.Do i need to update my firmware version to .587 before flashing ics rom.If so how to do it?please help me..
Click to expand...
Click to collapse
Mate
You should have flashed an Ics fw atleast
Before flashing an Ics Rom
Anyways flash. 587 fw using flashtool
Then root it using doomLord's kit
Refer to Madfysh's thread
Also then before installing Rom
Flash a custom kernel
As in that you get cwm in built
Then do all wipes
Format system format data
Is also needed
Then install Rom
Follow instructions in Aroma!
Done
Sent from my MT11i using xda premium
dileepm29 said:
hi friends.My NEO V is on 2.3.4 with software version 4.0.2.A.0.62.I unlocked bootloader and rooted my mobile successfully.I tried to flash an ics rom(xperia ultimate HD).I did flash it using aroma.When i tried to reboot phone it got struck at sony logo.I'm not able to enter recovery to restore my backup.Do i need to update my firmware version to .587 before flashing ics rom.If so how to do it?please help me..
Click to expand...
Click to collapse
You need an ics kernel. You were on gb and with your new rom you are on ics.
Your bootloader is unlocked so flash a ics kernel. There a plenty to choose from. For example stock, advanced stock, suave or night elf.
Flash the kernel and your phone will boot. Look if it functions well, otherwise install the Rom again.
Send from my Neo V via Jelly Sandwich 7.4 and night elf 1.5 using Tapatalk 2
motorazrv3 said:
You need an ics kernel. You were on gb and with your new rom you are on ics.
Your bootloader is unlocked so flash a ics kernel. There a plenty to choose from. For example stock, advanced stock, suave or night elf.
Flash the kernel and your phone will boot. Look if it functions well, otherwise install the Rom again.
Send from my Neo V via Jelly Sandwich 7.4 and night elf 1.5 using Tapatalk 2
Click to expand...
Click to collapse
I cannot boot into recovery by pressing volume down button repeatedly.How to flash kernel?
dileepm29 said:
I cannot boot into recovery by pressing volume down button repeatedly.How to flash kernel?
Click to expand...
Click to collapse
Flash kernel through fastboot mode
There's a thread in sticky section
Have a read before flashing!
Also read thread of kernel you've chosen to flash!
And to enter into fastboot mode
You've to press menu button at right side beside home key and plug usb into pc holding that button
Sent from my MT11i using xda premium
Ghostfreak NB said:
Flash kernel through fastboot mode
There's a thread in sticky section
Have a read before flashing!
Also read thread of kernel you've chosen to flash!
And to enter into fastboot mode
You've to press menu button at right side beside home key and plug usb into pc holding that button
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
I flashed ics kernel and then i'm able to boot into recovery.i flashed rom again and it worked thank a lot
Hello guys.
I am new here.
So i have Sony Xperia Neo V and i tried to flash some roms from here.
I did unlock bootloader officially. The easy way.
After that, i managed to flash a kernel via flashtool. Root and CWM installed as well.
I downloaded and flashed a miui rom for neo v, followed instructions (full wipe,cache,dalvik). The result: got stucked on the Sony logo screen.
I waited for like 15 minutes but nothing happened. Then i tried to boot on cwm in order to flash again or flash some other roms but i couldn't. I tried all the combination keys but i was unable to boot on cwm.
After official unlocking BL, seus won't let me update to factory settings.
So i tried to flash other files(custom and official kernels sony provided) with no success. It got stuck on flashtool at ~8% the first time.
After that nothing. Literally. No sony logo, no boot.
I can connect on flash mode (green led) but i can't do anything else.
I strongly believe that my phone is bricked now.
Is there any way to do something to unbrick?
P.S. 1 I tried FOTA unbrick tool but nothing.
P.S. 2 Sorry for my bad grammar.
Thanks in advance
Try to flash the stock ftf using flashtool!
Or else use SEUS!
That can UNbrick your phone!
Or
Flash custom kernel like
Suave, alliance,super stock,etc
Flash kernel like these via fastboot mode, not via flashtool flashmode!
That has cwm inbuilt ....and you can access recovery mode by pressing vol down button repeatedly!
Sent from my MT11i using xda premium
Which miui rom did you choose?
Was it a miui rom that works with stock kernel or a rom that requires a custom kernel?
My mistake was that i was trying on flashmode not fastboot.
So now I flashed Suave kernel and GB rom. It finally booted ))
Now i'm going to be more carefull.
Thanks to you guys.
maldino said:
My mistake was that i was trying on flashmode not fastboot.
So now I flashed Suave kernel and GB rom. It finally booted ))
Now i'm going to be more carefull.
Thanks to you guys.
Click to expand...
Click to collapse
Btw you made a mistake!
Suave is an Ics kernel
So use that kernel along with Ics Rom not GB good luck!
Sent from my MT11i using xda premium
Ghostfreak NB said:
Btw you made a mistake!
Suave is an Ics kernel
So use that kernel along with Ics Rom not GB good luck!
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
I'm going to flash other roms. The point is that phone works now.
maldino said:
I'm going to flash other roms. The point is that phone works now.
Click to expand...
Click to collapse
Then it's fine!
Just gave my 2 cents!
GB kernel --GB Rom
And likewise!
Sent from my MT11i using xda premium
i have tried to flash several roms. i unlocked the bootloader with flashtool and installed bussybox and root. but when i try to flash a rom and install it i get stock at the loading screen. i installed Naa kernel. so i really dont now what to do now.
dgaa1991 said:
i have tried to flash several roms. i unlocked the bootloader with flashtool and installed bussybox and root. but when i try to flash a rom and install it i get stock at the loading screen. i installed Naa kernel. so i really dont now what to do now.
Click to expand...
Click to collapse
seems u didnt flashed the kernel properly
and which kernel u flashed ?
p.s.
u posted in wrong section
Sent from my U20i using Tapatalk 2
i did use U20_nAa-jb-03_2.6.29.6-nAa-jb-03
dgaa1991 said:
i did use U20_nAa-jb-03_2.6.29.6-nAa-jb-03
Click to expand...
Click to collapse
did u tried repairing it back via sony companion ?
and which rom did u used ?
Sent from my U20i using Tapatalk 2
AW: Cant start my phone after flashing....
Have u wipe data and cache? If not, Boot into recovery and Marke the wipes. than restart again.
Sent from my U20i using xda app-developers app
Brother, you flashed a jelly bean kernel so you can just run CyanogenMod10 based roms(android 4.1.2 roms)
If you're going to flash a gingerbread rom(CyanogenMod7) (android 2,3) you must use a gingerbread kernel like : "nAa 14 gingerbread for x10mini"
Good Luck
sent via ULTIMATE GB beta