Related
Can anyone please help me with this? I have HTC Sensation with CM10. This tablet without root is uselles...
Anyone?
How did you put CM10 on it without root?
post-mortem said:
How did you put CM10 on it without root?
Click to expand...
Click to collapse
Read carefully what I wrote.
I have HTC Sensation with cm10. Its my dailly driver.
Goclever R75 i bought becouse it was cheap But what is android without root? And I cant get any information about that on this tablet...
No one know how to do that?
Okay
I have root
First U must turn on debuging mode and unknown sources.
then connect tablet to PC and install drivers from package in atachments.
Then double click on "ICS_Root_Unlocker.bat" and follow instructions!
is it function? no problems?
Yes this works. Ive done this 2 times
Hi! Can you please tell me how to instal drivers from that package?
If u dont know how 2 do that... Please do not root your device!
devgron said:
If u dont know how 2 do that... Please do not root your device!
Click to expand...
Click to collapse
Hi again, thanks for your concern but it's not my first time when a try to root a device. I have a sony x8 rooted and a rom on it but never needed to instal something like that to root so can you please tell me how do i get over that spep? Sorry for my english.
devgron said:
Okay
I have root
First U must turn on debuging mode and unknown sources.
then connect tablet to PC and install drivers from package in atachments.
Then double click on "ICS_Root_Unlocker.bat" and follow instructions!
Click to expand...
Click to collapse
I just hoped I haven't bricked my R75
It all went as it should until I ran ICS_Root_Unlocker.bat. It kept reporting device not found and than tablet rebooted itself. Logo of ICS appeared but after that it went totally blank. I could still use ADB to access tablet. All adb options that I tried worked - get state, etc. So I tried adb reboot bootloader and after ICS logo I got red triangle with exclamation mark. As I don't have volume up/down as physical buttons I am stuck - I can not access Android system recovery menu. Hardware usb keyboard works - I can reboot with tablet with it, for example. If I connect tablet to PC it is not recognized anymore. Any idea on what to do?
Kurjak78 said:
I just hoped I haven't bricked my R75
It all went as it should until I ran ICS_Root_Unlocker.bat. It kept reporting device not found and than tablet rebooted itself. Logo of ICS appeared but after that it went totally blank. I could still use ADB to access tablet. All adb options that I tried worked - get state, etc. So I tried adb reboot bootloader and after ICS logo I got red triangle with exclamation mark. As I don't have volume up/down as physical buttons I am stuck - I can not access Android system recovery menu. Hardware usb keyboard works - I can reboot with tablet with it, for example. If I connect tablet to PC it is not recognized anymore. Any idea on what to do?
Click to expand...
Click to collapse
Hi, I have same problem. Did you get fix for this??
zefer79 said:
Hi, I have same problem. Did you get fix for this??
Click to expand...
Click to collapse
No. Fortunately I was able to exchange it for the new one.
Kurjak78 said:
No. Fortunately I was able to exchange it for the new one.
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Bye.
orlairet conde
I have R75. It would be great if you could upload rooted version to sendspace. Thank you.
bugxyz said:
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Bye.
Click to expand...
Click to collapse
Kurjak78 said:
I have R75. It would be great if you could upload rooted version to sendspace. Thank you.
Click to expand...
Click to collapse
Hello!
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
WIFI not working and sensor keys bad workimg
bugxyz said:
Hello!
This is the link for R75 rooted firmware.
xxxx
I hope it helps you.
Bye.
Click to expand...
Click to collapse
:/ after install to "bricked" goclever tab r75 android from link xxx provided by bugxyz android run. .. wifi not working and senzor keys are shifted please help me :/ sorry for my bad english i am czech and the screen is shifted
Hello.
If you have those problems it means that you have an goclever tab 7500 and not an R 75. I saw that some contries 7500 was sold as R 75.
I had the same problem as you when I have flashed my R 75 with 7500 firmware.
I will upload also the 7500's firmware and provide the link when it is uploaded.
I hope this will help you.
Ps: 7500 firmware is unrooted.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
Sent from my LG-P990 using Tapatalk
thx
Thank you very much, it helped. how should I do to make me root it got broken again
declara kvide
bugxyz said:
Hello!
This is the link for R75 rooted firmware.
I hope it helps you.
Bye.
Click to expand...
Click to collapse
Bugxyz, you are a savior. Thank you.
Samsung S7262 Brick
How To Unbrick Samsung S7262
Information Required
uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
Hey can you provide some information that how did it get bricked?
I will try to help you out because have have the same phone!
uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
soft or hard brick ....is it booting in download mode??
S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.
Here for Help!
uniontelecom said:
S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.
Click to expand...
Click to collapse
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:
@ wahab96
Need Spered 6820i Fdl Files.
Thank You
uniontelecom said:
@ wahab96
Need Spered 6820i Fdl Files.
Thank You
Click to expand...
Click to collapse
Hey
have tried the All FDL files provided in attachments?
try them all!
wahab96 said:
Hey
have tried the All FDL files provided in attachments?
try them all!
Click to expand...
Click to collapse
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.
uniontelecom said:
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.
Click to expand...
Click to collapse
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.
that bad... but there is a way!
uniontelecom said:
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.
Click to expand...
Click to collapse
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!
wahab96 said:
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!
Click to expand...
Click to collapse
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You
uniontelecom said:
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You
Click to expand...
Click to collapse
what's your FDL always stack on broadband checking what i must chose and what i must to do exactly
good but the needed its a reasearchdownload .pac file backup
wahab96 said:
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:
Click to expand...
Click to collapse
good but the needed its a reasearchdownload .pac file backup maked from a working phone
i have flashed a .pac file from another device
now the device vibrates at startup :cyclops: and can be detected as adb but stay offline and if i try to enter in odin mode and the smart is detected as fastboot device but nothing can be flashed by the fastboot flash option and the fastboot oem unlock make anything hapen :crying:
i realy need a backup in .pac for this device. please if you can provide me,i really gonna like this :good: :fingers-crossed: ,but i don't have another one as the same to make this :crying:
and the only thing of i can make is get from anyone in the internet
but if you anyone like to try the files i wanna put the links here to this feedback :good:
download the rom file:http://www.needrom.com/download/lenovo-a376-sc8825/
and download the file in this tutorial https://www.youtube.com/watch?v=xQS3o7zwOG0
and them with the gpg dragon opened select spreadtrum(spd) tab them select the com port of the device conection the mine is (COM3)
them select sc8825 and flash_write and in the (...) button at the boton of the window select the .pac file and conect the smart and them click on START the file gonna be processed and the program gonna ask you to comfirm and press OK button wait the flash and now you already now what happen with you phone.
its a short tutorial
if i have broked any rule : I'M SORRY,I'M NEWER IN XDA DEVELOPERS
so, did anyone maneged to repair this set ?
wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
This worked for me to get into download mode.
Thank! for a second there I thought I bricked a stranger guy's phone
Hi I have a sumsung gt-s7262.I rooted my phone and did a few changes to the stock rom and soft bricked it . I managed to install cwm and it seems all data on the phone has been deleted. Is it okay for me to flash another rom or should i do something else first ? An answer will be greately appreciated.
GT-S7262
Hard bricked and not detecting device too..
Plzzz help me..
Seems Like HArd Bricked<Plz help>
Hi,
Let me first state the story behind the issue. Two days ago my Samsung S7262 got restart issue as it was not booting and was stucking in the first screen.The Phone was getting heated....Later,I tried to hard reset which did not work,so I went on flushing the ROM.Now, I am very new to this and did not have any prior expertise in it. I used Odin v3 and go Flash File from a site for India(I live in India) and tried to flash the ROM. It got completed but I still faced the issue. Then again I flashed once again which Pass ed too,but again the boot loop issue persist.Now, this time I picked another flash file from another site which was relatively larger and it was too for India. This time I tried to flash...after Pass the phone got hanged and I mistakenly removed the USB and then no display was there and it was looking like a brick!!! Later I researchd and now I repent had I went to service centre instead of applying my wicked engineering mind .Now, after much research, I found that now the phone is detected by PC's device manager but no display and still have that looping issue(I know this bcoz I am able to hear booting sound)...Plz help!!!
I had got my samsung galaxy star pro soft bricked and started to reserch about unbrick
But afraid of going ahead without true guide .
Any one plese help me.
I need complete guide with every single step.
?????.................
Hi,
I just tried the rooting method using Kingroot, but the phone got soft-bricked and stays in endless loop after the vodafone logo.
I already booted into stock recovery and did a factory reset, but the problem subsists, so i am desperate for a STOCK rom (kingroot must have messed up some files ... )
I have a V895N-2GVDPT1 (Vodafone Portugal)
-- EDIT --
I have found the KERNEL SOURCE under the "Open Source Code" here: http://www.vodafone.com/content/index/about/what/devices/smartprime6.html !!!
Thanks in advance!
Hi,
How You use that source code for reinstall the system?
I bricked the phone...
Can you boot to fastboot/download mode?
Try to use ADB to restore the stock ROM files, unfortunately I don't know where to find the stock ROM files
Sent from my VF-895N using XDA Free mobile app
Please help
trentinmarco said:
Hi,
How You use that source code for reinstall the system?
I bricked the phone...
Click to expand...
Click to collapse
i bricked my smart prime 6 aswell do you know how to use the sorce code?
Num3 said:
Hi,
I just tried the rooting method using Kingroot, but the phone got soft-bricked and stays in endless loop after the vodafone logo.
I already booted into stock recovery and did a factory reset, but the problem subsists, so i am desperate for a STOCK rom (kingroot must have messed up some files ... )
I have a V895N-2GVDPT1 (Vodafone Portugal)
-- EDIT --
Thanks in advance!
Click to expand...
Click to collapse
Hi,
sorry to read that, actually I got this phone from a friend who lost mine (here in Czech Republic) and I did root it, but I saw that many people had problem after rooting so I un-rooted and at the moment it's working properly... I think there is also this "Purify" maybe it did mess with the rom uninstalling things or who knows what...
I hope you find the way to restore the software...
Hi guys i m looking for rom for this phone as well i have 2 phone after i update phone phone stuck now can some one give me firmware for this phone plz
Hey, I bricked this phone as well
any stock rom to download and flash in recovery?
please, thanks a lot
Hi, i am looking for the stock rom for this phone.
Please share link.
Thanks
dragontass said:
Hi, i am looking for the stock rom for this phone.
Please share link.
Thanks
Click to expand...
Click to collapse
I need too
Plus88 said:
I need too
Click to expand...
Click to collapse
Try this htcmania.com/showthread.php?p=20641051
I do this and working ! Cheers !!
Plus88 said:
Try this htcmania.com/showthread.php?p=20641051
I do this and working ! Cheers !!
Click to expand...
Click to collapse
Many thanks - it worked perfectly! :good:
Useful information for anyone that cant get the phone to go to QDL mode
I tried the unbrck method above and could not get it to work as windows did not detect any com port.
after some mucking around i found if you cant get into QDL mode as needed you have to:
Open your phone. (have to unscrew phone)
Remove battery.
Connect usb cable.
Short the test point next to the sim card holder to ground.
Insert battery.
Windows detects phone.
Remove short from test point.
Proceed with unbrick
Hope this helps
Chris
could you explain in more detail how you shorted the phone please iv bricked my v895n
alverchristopher said:
Useful information for anyone that cant get the phone to go to QDL mode
I tried the unbrck method above and could not get it to work as windows did not detect any com port.
after some mucking around i found if you cant get into QDL mode as needed you have to:
Open your phone. (have to unscrew phone)
Remove battery.
Connect usb cable.
Short the test point next to the sim card holder to ground.
Insert battery.
Windows detects phone.
Remove short from test point.
Proceed with unbrick
Hope this helps
Chris
Click to expand...
Click to collapse
peraoterangi said:
Click to expand...
Click to collapse
Hi,
What exactly is:
"Short the test point next to the sim card holder to ground"
dragontass said:
Many thanks - it worked perfectly! :good:
Click to expand...
Click to collapse
Can someone help I went on the link provided htcmedia and download the unbrick zip when I used suger flash tool it got stuck at 2 percent does anyone have password or can post steps on how you got to work thanks guys u da best
Should I put my phone in download mode when connected to sugar qct-sp when I press upgrade because I get to 2percent even after 15 mins didn't budge I hope someone can help
If you try to root with KingRoot, works. But follow the next steps:
-reboot your phone into recovery mod using POWER BUTTON + VOLUME UP BUTTON
-next select english using POWER BUTTON
-next select "WRITE PROTECT SWICH" and select "set write protect off"
-now reboot your phone and start the KingRoot and Root.
-Now your device is rooted.
I need a stock ROM so badly. I removed some system apps I don't use but now I can't update.
Here's the log:
nstalling zip file '@/cache/recovery/block.map'
Installing zip file '@/cache/recovery/block.map'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
sysutil: mmapped 19 ranges
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
sysutil: mmapped 19 ranges
Verifying current system...
failed to stat "/system/app/Calendar/Calendar.apk": No such file or directory
file "/system/app/Calendar/Calendar.apk" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: "/system/app/Calendar/Calendar.apk" has unexpected contents.
"/system/app/Calendar/Calendar.apk" has unexpected contents.
Updater process ended with ERROR: 7
I:Legacy property environment disabled.
Error installing zip file '@/cache/recovery/block.map'
alverchristopher said:
Useful information for anyone that cant get the phone to go to QDL mode
I tried the unbrck method above and could not get it to work as windows did not detect any com port.
after some mucking around i found if you cant get into QDL mode as needed you have to:
Open your phone. (have to unscrew phone)
Remove battery.
Connect usb cable.
Short the test point next to the sim card holder to ground.
Insert battery.
Windows detects phone.
Remove short from test point.
Proceed with unbrick
Hope this helps
Chris
Click to expand...
Click to collapse
What you mean "Short the test point next to the sim card holder to ground." Sorry, I not understand! Can you show a picture please!?
1st custom ROM for VF-895N: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/
Hi Guys
Sorry For My English ...
my phone hard bricked and it's not open
i follow one of threads here .. and i download the debrick.img for i9205 because i cannot make it
and flashed it in micro sd and my phone open samsung galaxy mega logo with green writing top left Set Warranty Bit : kernel
and 2 lines red and restart, only doing this
and i can access download mode but i cannot accses recovery mode
I tried reflashing stock rom with ODIN, I got the PASSED green message , but the phone still stuck on boot loop.
and i install twrp and cwm recovery but my recovery doesn't open
and when i remove the micro sd my phone it's not open .. and when i put it my phone open
Please help I can't use the phone at all.
debrick.img
Hi man, I have the same exact problem. Except, I didn't have access to the debrick.img yet. Can you share it with me? Thanks in advance!
saddah said:
Hi Guys
i follow one of threads here .. and i downloaded the debrick.img for i9205 because i cannot make it
(
Click to expand...
Click to collapse
debrick.img
JoooostB said:
Hi man, I have the same exact problem. Except, I didn't have access to the debrick.img yet. Can you share it with me? Thanks in advance!
Click to expand...
Click to collapse
the debrick.img here
http://www.mediafire.com/download/32x34l6secb6zc2/debrick.img
and follow the steps here
http://forum.xda-developers.com/showthread.php?t=2591176
Hello.
I was trying to install a treble rom on my p20 lite and suddenly after flashing i needed to flash stock recovery to make the stock wipes.
I did.
The rom started but with no keyboard. I couldnt pass google part to get to the rom menu.
Ok.
I decided to flash it again.
I did. But this time, the rom never started and i was with stock erecovery, so couldnt flash again.
I went to flash twrp but FRP is LOCKed. Bootloader unlocked, obviously. And bc of that i cant flash ANYTHING.
Tried to flash system, twrp, anything. I cant. Says FRP lock.
Tried to lock bootloader and relock again: I cant. It says it needs to unlock FRP before.
Tried DC PHOENIX, didn't work on my p20.
Scrolled all google and xda for help, nothing.
Tried erecovery stock rom installation. It downloads the files but never installs, i've spent 5 hours waiting for it to go off the 0%. Nothing happens.
Already made erecovery wipe data/cache. Nothing.
Can someone please help me?
Hi there
Can you tell what's your build number if you already knew before this happened?
Also, right now your only hope is your Stock Recovery so let's focus on that:
Please try to download and install the official ROM via the eRecovery a couple of times and connect it to the best Wifi you have.
Do you have bootloader "unlocked" or "locked" right now?
FRP is locked so no changes possible yup.
If you have your bootloader "locked" not "relocked" you have warranty and you can send it to a customer repair center and they can solve it for you.
With the methods we know it's pretty much impossible, altough try this via fastboot command line:
fastboot erase config
then
fastboot reboot
If this does not do it then try with DC-Unlocker software via this link https://www.dc-unlocker.com/huawei-android-phone-frp-unlock
Sorry for insisting,
Best of hopes,
AS
ars_chelsea said:
Hi there
Can you tell what's your build number if you already knew before this happened?
Also, right now your only hope is your Stock Recovery so let's focus on that:
Please try to download and install the official ROM via the eRecovery a couple of times and connect it to the best Wifi you have.
Do you have bootloader "unlocked" or "locked" right now?
FRP is locked so no changes possible yup.
If you have your bootloader "locked" not "relocked" you have warranty and you can send it to a customer repair center and they can solve it for you.
With the methods we know it's pretty much impossible, altough try this via fastboot command line:
fastboot erase config
then
fastboot reboot
If this does not do it then try with DC-Unlocker software via this link https://www.dc-unlocker.com/huawei-android-phone-frp-unlock
Sorry for insisting,
Best of hopes,
AS
Click to expand...
Click to collapse
Hey, thanks for the answer.
My build number (ane-lx3 c605 b149)
I tried for like 10 times already to install the firmware from erecovery but it refuses to leave the 0% when installing... Ive waited more than 5 hours already.
When trying these fastboot command lines, i got this: https://imgur.com/a/hrSB8iK
Dc also didnt worked for me, i think it doesnt support my phone model?
Bc i can't find it in the list of phone model in the software also tried with similar and doesnt work.
My bootloader is unlocked, i guess warranty wont solve my problem bc of that :crying:
Thanks again for tryna help!
you need sd card
download this file: https://androidhost.ru/cBe
unzip this file, inside software folder are dload folder, coppy that to sd card
put sd card in phone
pres vol+ and vol- and power button (need atlest 50% batery)
give a try.
Arnys said:
you need sd card
download this file: https://androidhost.ru/cBe
unzip this file, inside software folder are dload folder, coppy that to sd card
put sd card in phone
pres vol+ and vol- and power button (need atlest 50% batery)
give a try.
Click to expand...
Click to collapse
He/She does need a micro sd card adapter for that to connect to the pc or use it on another phone and then copy the files.
Yeah I forgot about that I guess XD
Cheers,
AS
ars_chelsea said:
He/She does need a micro sd card adapter for that to connect to the pc or use it on another phone and then copy the files.
Yeah I forgot about that I guess XD
Cheers,
AS
Click to expand...
Click to collapse
Arnys said:
you need sd card
download this file: https://androidhost.ru/cBe
unzip this file, inside software folder are dload folder, coppy that to sd card
put sd card in phone
pres vol+ and vol- and power button (need atlest 50% batery)
give a try.
Click to expand...
Click to collapse
Thank you, guys.
I tried this method just now but after a time with EMUI logo in the screen it said software install failed!
I guess im really lost. :crying:
fcknumb said:
Thank you, guys.
I tried this method just now but after a time with EMUI logo in the screen it said software install failed!
I guess im really lost. :crying:
Click to expand...
Click to collapse
Hey
Did you try the official guide of @Merlin_99?
If not check his thread here: https://forum.xda-developers.com/huawei-p20-lite/how-to/root-how-to-install-update-t3841557
That's the official way to do it
Cheers,
AS
ars_chelsea said:
Hey
Did you try the official guide of @Merlin_99?
If not check his thread here: https://forum.xda-developers.com/huawei-p20-lite/how-to/root-how-to-install-update-t3841557
That's the official way to do it
Cheers,
AS
Click to expand...
Click to collapse
Thanks for your reply and still tryna help me.
As i see, the only thing i didnt do from the official guide is this part:
"Finally, enter to the project menu from dialer typing *#*#2846579#*#* ==> Software Upgrade ==> SdCard Upgrade."
That i cant do cause my phone is systemless and i cant turn it on to use dialer :crying:
fcknumb said:
Thanks for your reply and still tryna help me.
As i see, the only thing i didnt do from the official guide is this part:
"Finally, enter to the project menu from dialer typing *#*#2846579#*#* ==> Software Upgrade ==> SdCard Upgrade."
That i cant do cause my phone is systemless and i cant turn it on to use dialer :crying:
Click to expand...
Click to collapse
Okay then.
It should work though did you put the dload folder into the root your sd card and then power on button + Volume buttons at the same time while powering on?
Cheers,
AS
ars_chelsea said:
Okay then.
It should work though did you put the dload folder into the root your sd card and then power on button + Volume buttons at the same time while powering on?
Cheers,
AS
Click to expand...
Click to collapse
Right bae, its like that into my sdcard: 1. http://prntscr.com/lx74xt 2. http://prntscr.com/lx7im7
And yes, i did pressed power and + - volume buttons at same time!
Thank you for not giving up.
fcknumb said:
Right bae, its like that into my sdcard: 1. http://prntscr.com/lx74xt 2. http://prntscr.com/lx7im7
And yes, i did pressed power and + - volume buttons at same time!
Thank you for not giving up.
Click to expand...
Click to collapse
Hi again
This is really weird... This one should work... Did you download the right version of your build? example: 8.0.0.162(C432)
And try to find the latest version of your build and via your model example: ANE-LX1 which is on the back of the phone with small letters or on the box
Cheers,
AS
ars_chelsea said:
Hi again
This is really weird... This one should work... Did you download the right version of your build? example: 8.0.0.162(C432)
And try to find the latest version of your build and via your model example: ANE-LX1 which is on the back of the phone with small letters or on the box
Cheers,
AS
Click to expand...
Click to collapse
Yeah, i did it all right.
So sad...
fcknumb said:
Yeah, i did it all right.
So sad...
Click to expand...
Click to collapse
Remote instructions are not the best for these problems, so try to get a person on your country which knows some stuff and can help you out there