Hey there
its my first post in xda
sorry my english is bad
intructions
1.download the g-apps
2.download CWM (search in forum)
3.place to /sdcard
4.reboot recovery
5.wipe data and cache
6.reboot to cwm
7.flash the g-apps
8.done
if the g-apps not instaled
1.flash your phone with stock rom
2.install your rom via recovery (after the rom installed don`t reboot your phone)
3.go to cwm
4.flash the g-apps
5.done
Tested and work on my galaxy y using JellyblastV3
Credits:
Ganesh A for G-apps
Me for Instuction
Good...
And credits...
Ganesh A said:
Good...
And credits...
Click to expand...
Click to collapse
ok sorry
Related
My phone is Live With Walkman, Carbon rom, 4.4.2
I flashed a gapps, but it doesn't work correctly,
I want to flash another gapps on my rom.
What I have to do?
how can i flash another gapps on this gapps?
mzandi17 said:
My phone is Live With Walkman, Carbon rom, 4.4.2
I flashed a gapps, but it doesn't work correctly,
I want to flash another gapps on my rom.
What I have to do?
how can i flash another gapps on this gapps?
Click to expand...
Click to collapse
hi, you can flash these: http://goo.im/devs/BaNkS/GApps/4.4.2 choose the minimal package. (the normal just include g+ & gmail, which u can install from playstore)
but maybe you need to make a clean install (da a wipe data/factory reset) ; flash ROM + gapps, done.
but 1st just installl gapps from link abobe & see if all is fine may
bejunk said:
hi, you can flash these: http://goo.im/devs/BaNkS/GApps/4.4.2 choose the minimal package. (the normal just include g+ & gmail, which u can install from playstore)
but maybe you need to make a clean install (da a wipe data/factory reset) ; flash ROM + gapps, done.
but 1st just installl gapps from link abobe & see if all is fine may
Click to expand...
Click to collapse
Thanks,
If i want to flash the new Gapps on existing rom, and existing Gapps, do i have to wipe data/factory reset, after flashing?
mzandi17 said:
Thanks,
If i want to flash the new Gapps on existing rom, and existing Gapps, do i have to wipe data/factory reset, after flashing?
Click to expand...
Click to collapse
no , do this:
1 flash the gapps package i gave you link. (no wipes need just falsh)
-->if all worked then its fine.:highfive: (done)
-->if not worked: the go CWM, do wipe data/factory reset (deletes all user data..)NOW FLASH GAPPS. boot
bejunk said:
no , do this:
1 flash the gapps package i gave you link. (no wipes need just falsh)
-->if all worked then its fine.:highfive: (done)
-->if not worked: the go CWM, do wipe data/factory reset (deletes all user data..)NOW FLASH GAPPS. boot
Click to expand...
Click to collapse
thank you very much, it worked without wiping,
i have another question,
if i want to flash a new kernel on existing kernel and existing rom, what i have to do?
sorry about my low level questions.
mzandi17 said:
thank you very much, it worked without wiping,
i have another question,
if i want to flash a new kernel on existing kernel and existing rom, what i have to do?
sorry about my low level questions.
Click to expand...
Click to collapse
1. make sure kernel is compatible with ur current ROM (very important)
2. do a backup.
3. connect the phone via fastboot & flash the desired kernel as allways
4. boot right into CWM , wipe dalvik-cache & chache
5. boot. done
bejunk said:
1. make sure kernel is compatible with ur current ROM (very important)
2. do a backup.
3. connect the phone via fastboot & flash the desired kernel as allways
4. boot right into CWM , wipe dalvik-cache & chache
5. boot. done
Click to expand...
Click to collapse
thans alot :good:
Gt-n7000 custom rom cm 12.1 androİd 5.1.1 thanks (bauner) this rom is safe!!!
THİS ROM FULL WORKİNG..
NOT WORKİNG:
1.BOOT ANİMATİONS...
lİnk
ROM
1 :https://www.androidfilehost.com/?fid=23991606952592204
2 :http://speedy.sh/VZ5uW/CM.12.1-DR-MALI-PRE-ALPHA.zip
KERNEL:http://ge.tt/8d1ohVD2/v/1
BOOTANİMATİONS:https://drive.google.com/file/d/0B7kgi1V4KPS2aVU0d3Y2OFdUczQ/view?usp=sharing
GAPPS:http://forum.xda-developers.com/showpost.php?p=59691711&postcount=5
1. Copy Rom + Google Apps to your device.
2. Boot into recovery
3a. Factory Reset (Recommended to avoid any FC or bootloops) (Updates from older NightOwl Betas should work without Factory reset)
3b. Wipe the dalvik-cache in recovery after updating from an older beta!!!
4. Flash the Rom and Gapps.
5.Flash stock boot animations.
6. Reboot
7.enjoy..
Hi guys,
I successfully followed the advice on this thread (http://forum.xda-developers.com/galaxy-s2/help/to-mod-s2-t3189884) and I have installed CM12.1 's nightly from 29/8.
I boot in once, no problem. But on the second boot the phone bricks. The only way I can get into the system again is to load Philz kernel again and reinstall. But after the second boot the phone bricks again.
Any ideas? It may be the nightly, but even updating to the latest (31/8) didn't fix this.
I can get the CM10.1 stable to work fine, but that drain my battery faster than I can charge it.
I'd like to use 12.1, though: am I just doing something wrong that causes the bricking?
thanks,
blahsum said:
Hi guys,
I successfully followed the advice on this thread (http://forum.xda-developers.com/galaxy-s2/help/to-mod-s2-t3189884) and I have installed CM12.1 's nightly from 29/8.
I boot in once, no problem. But on the second boot the phone bricks. The only way I can get into the system again is to load Philz kernel again and reinstall. But after the second boot the phone bricks again.
Any ideas? It may be the nightly, but even updating to the latest (31/8) didn't fix this.
I can get the CM10.1 stable to work fine, but that drain my battery faster than I can charge it.
I'd like to use 12.1, though: am I just doing something wrong that causes the bricking?
thanks,
Click to expand...
Click to collapse
Clean install the rom!!
1.At first Flash stock rom
2.flash philz kernel
3.Reboot to recovery
4.Wipe Cache Partition and Dalvik/ART Cache
5.Now click on Clean to Install New ROM
6.Install the rom
7.Reboot system
Don't forget to hit the thanks button
Sureshtuty said:
Clean install the rom!!
1.At first Flash stock rom
2.flash philz kernel
3.Reboot to recovery
4.Wipe Cache Partition and Dalvik/ART Cache
5.Now click on Clean to Install New ROM
6.Install the rom
7.Reboot system
Don't forget to hit the thanks button
Click to expand...
Click to collapse
When you say I should flash the rom, do you mean I should unzip the stock and push it with Heimdall/Odin?
blahsum said:
When you say I should flash the rom, do you mean I should unzip the stock and push it with Heimdall/Odin?
Click to expand...
Click to collapse
I mean before flashing any custom rom flash stock rom then flash that rom which u want.
1.download stock firmware flash it with odin
2.then flash philz kernel
3.Reboot to recovery
4.Wipe Cache Partition and Dalvik/ART Cache
5.Now click on Clean to Install New ROM
6.Install the rom
7.Reboot system
Don't forget to hit the thanks button
Excellent, thank you!
A few tips to anyone looking this up:
First, I used Heimdall - but apparently Odin is quite similar.
I had to unpack the stock rom and then individually flash the factoryfs and zimage files.
I then unpacked the Phils mod and flashed the zimage again.
That was all in download mode
After that I flashed CM12 in recovery mode.
Hi all!
I'm a new user of i9100
I already rooted my phone and got cwm 3.75 (with touch)
now I want to install CM13
I ready losts of post about upgrade and I generate few steps for this
1. backup
2. install recovery for kk
3. install kernel for kk
4. re-partition
5. flash CM13
6. flash gapps v.6
7. flash TWRP for CM13
is this way correct?
ps. my english isn't good, sorry
Hi
Best way is to stick to the thread by @gsstudios : " (Guide) ( Noobfriendly) Want to update to Cm 13? Read this first!
Many new users made 2 mistakes you should avoid:
1) they did not increase the System space to at least 1GB System and 4 GB Date - so they could not install any Gapps
2) they did not install the isorec-Revovery TWRP by @arnab - so they had no useful Revovery (but only the useless CM - recovery)
Which worked for me on 3 Devices:
1) Backup
2) flash pitfile 1GB System 4 GB data and the gustavo kernel (which includes CWM Recovery)
3) Do not forget to format in CWM recovery
4) Then make a clean flash and install CM 13 and the Gapps (open gapps pico) AND the isorec-recovery TWRP [email protected] ALL IN ONE GO - TO NOT REBOOT IN BETWEEN-
5) Reboot system and enjoy
hi all OxygenOS-v9.0.11-OP6t-sGSI-beryllium
https://androidfilehost.com/?fid=11410963190603914330
How to Install for twrp plz
Is this work withoug bugs?
monzer said:
hi all OxygenOS-v9.0.11-OP6t-sGSI-beryllium
https://androidfilehost.com/?fid=11410963190603914330
How to Install for twrp plz
Click to expand...
Click to collapse
Bro U have to follow these steps:
1.Download the ROM of your choice.
2.Flash latest PIE Firmware and Vendor.
3.Make a full wipe (system, data, cache, dalvik).
3.Do factory reset.(Optional : But this is recommended to avoid any issues)
4.Flash Rom.(Gapps are included).
5.Flash vendor patch(Flash this everytime you change vendor).
6.Flash IR Face Unlock(Optional).
Original thread link: https://forum.xda-developers.com/po...i-oxygen-os-v9-0-3-v9-0-11-beryllium-t3896547
Good luck ?
Supriyo 77492 said:
Bro U have to follow these steps:
1.Download the ROM of your choice.
2.Flash latest PIE Firmware and Vendor.
3.Make a full wipe (system, data, cache, dalvik).
3.Do factory reset.(Optional : But this is recommended to avoid any issues)
4.Flash Rom.(Gapps are included).
5.Flash vendor patch(Flash this everytime you change vendor).
6.Flash IR Face Unlock(Optional).
Original thread link: https://forum.xda-developers.com/po...i-oxygen-os-v9-0-3-v9-0-11-beryllium-t3896547
Good luck ?
Click to expand...
Click to collapse
thanks man