I'm in Australia and have bought an XT910 from someone in America and it turned out to be Mexican (woo ebay).
Currently
System version: 651.73.250.XT910.AmericaMovil.en.01
Android version: 2.3.5
Baseband version: U_1C.76.03P
For that carrier 2.3.5 is still the newest update and what I want to do is flash it over to whatever would be best for Australia. (I use TPG which uses Optus) I want 4.anything
I've rooted the phone and I have an EuropeAustralia rom from sbf.droid-developers.org/umts_spyder/list.php if I chuck that into RSD Lite (5.6) I get an error:
Failed flashing process. Failed flashing process. 1/11 flash cdt.bin "cdt.bin_signed" -> Phone returned FAIL; phone connected
This doesn't brick my phone but it doesn't do anything else either.
I read somewhere that you can't flash to different baseband versions, but I'm not sure about that statement..
Thoughts? I'm relatively new to this so thanks for being patient
No matter where you live, you must flash a firmware for it's ORIGINAL region (functionality it's not different by region), in fact all regions of the XT910 have been in ICS for quite long, since you have a mexican XT910 then you can flash any LATAM and Canada firmware but I recommend you this one http://forum.xda-developers.com/showthread.php?t=1753383 first since it is bloatware free, after then you can research more and get more knowledge to mod it the way you like :good:
Edit:
In the post I linked download the one that says retail brasil
osval. said:
No matter where you live, you must flash a firmware for it's ORIGINAL region (functionality it's not different by region), in fact all regions of the XT910 have been in ICS for quite long, since you have a mexican XT910 then you can flash any LATAM and Canada firmware but I recommend you this one http://forum.xda-developers.com/showthread.php?t=1753383 first since it is bloatware free, after then you can research more and get more knowledge to mod it the way you like :good:
Edit:
In the post I linked download the one that says retail brasil
Click to expand...
Click to collapse
Thanks, worked a charm. Thought it would be something like that, I was sure everything else was fine.
Also, you can try this:
http://forum.xda-developers.com/showthread.php?t=2078021
Its the JB leak.
Don't worry ; you aren't going to brick ur phone.
Just follow all steps and everything is going to be fine
If everything goes wrong...you can flash GB on your phone (just download fastboot gingerbread rom) and flash it with rsd lite ; then update again to ICS.
Welll, its pretty easy
If you need anything else just ask
after you flash ICS there's no way back to gingerbread, you don't have to flash gingerbread before flashing ICS, unnecessary
Enviado desde mi XT910 usando Tapatalk 2
pablobhz said:
Also, you can try this:
http://forum.xda-developers.com/showthread.php?t=2078021
Its the JB leak.
Don't worry ; you aren't going to brick ur phone.
Just follow all steps and everything is going to be fine
If everything goes wrong...you can flash GB on your phone (just download fastboot gingerbread rom) and flash it with rsd lite ; then update again to ICS.
Welll, its pretty easy
If you need anything else just ask
Click to expand...
Click to collapse
No offence bro, but that's the worst advice I've heard yet..
First up you can't follow the guide to JB path if you're on GB ( bmm is ics and up only )
so then if you do upgrade to ICS and then follow the path to JB there is no way you can down grade to GB
My advice use ics and enjoy ...easy
Sent from my XT910 using xda app-developers app
Related
I have tried CM9 on my Razr for a while but not quite happy with it but I can not flash it back to stock ROM. Does anyone know where to look for the solutions? I have read many topics but not make it through. It keeps saying Installation abort.
Thank you in advance.
use RSD Lite to flash stock ROM Gingerbread
What he said.....make sure you download the correct fast boot files which correspond with your phone....then just use RSS lite to flash to phone. This is simple and works well
Or use the RAZR utility which is a one stop shop
Sent from my XT910 using XDA
md07 said:
use RSD Lite to flash stock ROM Gingerbread
Click to expand...
Click to collapse
This. I just did this last week (reverting from leaked ICS back to stock GB). Works fine. Just RSD to stock GB and let your phone update all the way to the latest OTA.
which version of ics are you running? 84 or 83?
ddfuji said:
which version of ics are you running? 84 or 83?
Click to expand...
Click to collapse
i used matts droid razr utility,the full version,it installs the fastboot files for you and worked great for me,was able to get back to 171 then ota to 181 root,install safestrap and voodoo all with the dru,just look it up in the forum
I am running the leaked canadian rogers ics firmware on my gsm razr xt910
I would like to revert back to gingerbread 2.3.6
I have the gingerbread stock firmware with the .xml files and everything, so if i flash them with rsdlite , will i be back on gingerbread or will that just brick my phone?I need to know because Ive been told the cdi.bin files are totally different, but since im flashing a fresh firmware signed and using rsdlite there shouldnt be a problem? Thanks
Can't go back to GB after upgrading to ICS... Bootloader is different. You will brick Sorry...
Thank the locked bootloader...
Can anyone assist me to know if there is any ICS Stock/Leaked Rom availabe for Motorola Razr Middle East Users?
What's your current System Version? Asia Retail or EU?
Sent from my XT910
I am currently on
Model:XT910
Android Version:2.3.5
System Version:65.1.21.xt910.meretail.en.06
Baseband version:U_03.iC.85p
build# 6.5.1_73-SPd-IRD-21
http://forum.xda-developers.com/showthread.php?p=31476707
Here're all current XT910 Leaks listed, that we got right now. But unfortunately there's no ME Retail. I'm not sure, if you can use the Asian or EU Retail. Sorry, i guess you'll have to wait for official release. Maybe another ME Retail user can confirm, that you can use one of this Leaks. I won't brick your Phone
Sent from my XT910
masaud said:
I am currently on
Model:XT910
Android Version:2.3.5
System Version:65.1.21.xt910.meretail.en.06
Baseband version:U_03.iC.85p
build# 6.5.1_73-SPd-IRD-21
Click to expand...
Click to collapse
I also using ME version 2.3.5. But now i updated to 4.0.4 EU version Leaked Rom. It is working perfectly and great.
If u want to install EU version, u can download xml file and flash with RSD lite on Fastboot mod.
Don't forget to press Thanks Button
ICS for ME Retail - Official
Hi Masaud,
Go to this link and download the version 673.94.324.XT910.MERetail.en.06
http://www.droidevelopers.com/downloads.php?do=file&id=1408
Flash it using RSD and following the necessary procedures involved, you will have ICS on your RAZR. Once flashed, go to About Phone and check for system updates and you will get an update notification which will take it to 673.94.328
Enjoy your RAZR with ICS!
Thanks.Finally i managed to get ICS on my Razr.But after installing I tried to update it and it says there is no update availabe.I am now on
673.94.324.Xt910.MERetail.en.06
masaud said:
Thanks.Finally i managed to get ICS on my Razr.But after installing I tried to update it and it says there is no update availabe.I am now on
673.94.324.Xt910.MERetail.en.06
Click to expand...
Click to collapse
Is it good and stable? I have a Middle East Razr Maxx and about to try this out.
Yes, it is stable and I am getting a good battery life as well.
Do anyone know from where to download Blur_Version.673.94.328.XT910.MERetail.en.06?
I am very sorry people but I have no idea what to do.
I have a Motorola RAZR XT910 with the 651.167.21.XT910.Retail.en.EU firmware. When I hit system-update the phone tells me that there is no update available. As far as I can tell my phone is unbranded. My carrier is from germany is called Simyo and runs on the german E-Plus network.
I have read that the updates to ICS should be rolling out sometime this month.
But I was wondering if I could update to ICS without waiting? There are so many ROMS and Fastboot and stuff flying around that I have no idea what to take and to flash. What I know is I have to flash the following version of exact my ROM, right? So maybe it isnt even possible?
Answer would be appreciated.
Cheers
why dont u flash an ICS stock ROM then?
mine have the same version with urs, and then i flash an ICS stock ROM as soon it's available here
Sent from Motorola Razr XT910 With beatsaudio™ on ICS 4.0.4
Can I flash any ICS stock ROM? I am unsure because I read that you can only flash ROMs that work with the right build.
So I will just take a ROM from the Project Eternity thread that is ICS and flash it, right?
yes u can. before that, just make sure that the ROM is for XT910. Not for XT910S or else
Sent from Motorola Razr XT910 With beatsaudio™ on ICS 4.0.4
I have an DROID RAZR XT910 GSM/CDMA with the following stock ICS: 673.94.328.XT910.Optus.en.AU, Version 4.0.4, Build 6.7.3-94_SPI-328 and while looking at all the mods and roms out there I'm not confident in flashing this device because the version numbers are different and I don't wanna brick my phone (at close to AUD$800 I think you can understand why) so need help with getting JB onto it (impatient here in OZ, last round from GB to ICS took 6 months from advertised to actually going OTA here). Phone is rooted, have Titanium Backup and SuperSU installed but:
1: don't know how to back up the whole stock in case of failure and need to reinstall
2: not sure that any ROMs are safe to use in my phone (differing stock numbers etc)
3: what other software needed to make this happen
Can anyone please help!?! (where's that old interrobang when you need it)
SimonTWolf said:
I have an DROID RAZR XT910 GSM/CDMA with the following stock ICS: 673.94.328.XT910.Optus.en.AU, Version 4.0.4, Build 6.7.3-94_SPI-328 and while looking at all the mods and roms out there I'm not confident in flashing this device because the version numbers are different and I don't wanna brick my phone (at close to AUD$800 I think you can understand why) so need help with getting JB onto it (impatient here in OZ, last round from GB to ICS took 6 months from advertised to actually going OTA here). Phone is rooted, have Titanium Backup and SuperSU installed but:
1: don't know how to back up the whole stock in case of failure and need to reinstall
2: not sure that any ROMs are safe to use in my phone (differing stock numbers etc)
3: what other software needed to make this happen
Can anyone please help!?! (where's that old interrobang when you need it)
Click to expand...
Click to collapse
Hi!
I'm an Aussie user but bought mine through Kogan (so it's a German phone). If you've already rooted the phone and have Stock ICS I'd recommend installing SS3.11 or BMM and running another JB ROM rather than try to flash stock.
There's heaps of threads with great ROMs on here and the Development thread:
http://forum.xda-developers.com/showthread.php?t=2162827
http://forum.xda-developers.com/showthread.php?t=2028020
Personally I use SS3.11 with CM10.1 as my daily and it's fine. I can also recommend AOKP4.22 which is now officially supported on XT910.
Benefit of this setup is that I can also boot back to stock whenever I want.
Cheers and happy flashing!
:victory:
Big UPS
philharmonick said:
Hi!
I'm an Aussie user but bought mine through Kogan (so it's a German phone). If you've already rooted the phone and have Stock ICS I'd recommend installing SS3.11 or BMM and running another JB ROM rather than try to flash stock.
There's heaps of threads with great ROMs on here and the Development thread:
http://forum.xda-developers.com/showthread.php?t=2162827
http://forum.xda-developers.com/showthread.php?t=2028020
Personally I use SS3.11 with CM10.1 as my daily and it's fine. I can also recommend AOKP4.22 which is now officially supported on XT910.
Benefit of this setup is that I can also boot back to stock whenever I want.
Cheers and happy flashing!
:victory:
Click to expand...
Click to collapse
many thanks, as I don't want to touch the stock at all I'm using this method (ss3 and aokp/cm10.1 tri-boot {keeping the stock I'll have three systems})
SimonTWolf said:
many thanks, as I don't want to touch the stock at all I'm using this method (ss3 and aokp/cm10.1 tri-boot {keeping the stock I'll have three systems})
Click to expand...
Click to collapse
This is a bit late to see this thread, but there is a thread for the retail.au 4.1.2 official. If you do a search of the forum with "retail" and "au" you'll find it. Stock rom that needs to flash a kernel first.
First be sure to root if you're still on ICS. There's a one-click root tool in the development section.
Requires BMM 0.3.4, from there you can install the recovery and reboot into it. It allows you to do a nandroid backup.
dabanhfreak said:
This is a bit late to see this thread, but there is a thread for the retail.au 4.1.2 official. If you do a search of the forum with "retail" and "au" you'll find it. Stock rom that needs to flash a kernel first.
First be sure to root if you're still on ICS. There's a one-click root tool in the development section.
Requires BMM 0.3.4, from there you can install the recovery and reboot into it. It allows you to do a nandroid backup.
Click to expand...
Click to collapse
thx mate, not impressed with AOKP or CM10 so hopefully the 4.1.2 official will keep me happy