I am new in case of Windows Phone flashing and all ...
Basically i want custom windows phone 7.8 on my phone (like this one - http://forum.xda-developers.com/show...0352&nocache=1 ) and i don't know the procedure to do the same. I read all the forums on XDA Developers but i seriously got confused about what to actually do with my phone...
I would be really thankful if anybody guides me through all the steps involved in flashing custom ROM by some RSPL/HSPL method ... Also do I need to downgrade anything ??? If yes HOW??/
I have given all the information about my current state of phone
PLEASE HELP !!!! PLEASE HELP!!!!! PLEASE HELP!!!!!!
PHONE INFORMATION :
Name: HTC 7 Mozart T8698
Model: HTC 7 Mozart T8698
Software: Windows Phone 7.5
Total Storage: 7.20 GB
Available Storage: 1.67 GB
OS Version: 7.10.8773.98
Firmware revision number: 2250.21.51205.707
Hardware revision number: 0004
Radio software version: 5.69.09.05a_22.50.50.21U
Radio hardware version: A.102.0.D4
Bootloader version: 5.12.2250.5(139188)
Chip SOC version: 2.2.5.0
MAC address: F8-DB-7F-86-89-79
SIM ID: 89910704910009427355
INFORMATION DISPLAYED when switching on the phone with volume down button :
IN RED _________
PD67100 SS-BC (4K)
SPL-5.12.2250.5(139188) MNG
MicroP(LED) 0*07
TOUCH C1(v69)
IN GREEN_________
SD SANDISK 7580MB
Partition Info-v211v413
IN BLUE______________
IN WHITE_____________
Serial
General INFORMATION:
COUNTRY: INDIA ( So i guess my phone is not SIM locked i think it is called unbranded )
Hi i was new to all this and installed dynamics v2.0 fully unlocked rom the other day and this is how i went about it
download this
http://mediafire.com/?3p9p97ta84bjym2
password - verynuclear
this is a load your phone back to 1.24
to install it i did this
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial but maybe it will need to install some drivers cant remember 100%
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that then you will have your phone back to 1.24
next you can follow this post here and download the attachment at the bottom named DFT_XSPL_WP7FG1.rar this what u need for this step
http://forum.xda-developers.com/showthread.php?t=1195647
basically this is the install procedure u may need to install active sync (XP) or windows mobile device center (vista and 7) but i did not have to my phone automatically did this
DFT_RSPL_WP7FG1_LAUNCH allows you to load RSPL on the device:
1. Extract ALL files from RAR archive.
2. Run DFT_RSPL_WP7FG1_LAUNCH (with administrative rights to access USB)
3. Mindfully reads information text. Press “Next” button.
4. Reset your device and hold “Volume Down” button during reset to enter OSPL mode.
5. Connect your device to PC via USB cable.
6. Now you may need to install proper USB drivers. They come with Active Sync / Windows Mobile Device Center.
7. Install drivers if required.
8. Make sure device show “USB” at the bottom instead of “Serial”.
9. Press “Next” button in the wizard. It should detect your phone.
10. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
11. After successful connection it should show device codename and allows to choose installed OSPL version.
12. You should look at the screen and select OSPL version in drop down list box. You need do this because it’s not possible to detect installed version via USB.
If your current SPL version doesn't present in the list, you can choose nearest version,
BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
13. Press “Next”. Wait until comes final page.
14. Read and close window
15. Look at the device – it must reboot to RSPL.
16. If you see RSPLX.Y.Z and “CotullaRSPL” on the screen – the task done! Otherwise, please report in this thread about your problems.
17. Put some feedback in this thread for community and developers.
Installing HSPL
DFT_HSPL_WP7FG1_INSTALL allows you to install HSPL on the device:
1. Launch RSPL on the device like described above.
2. Be sure that you close RSPL wizard window.
3. Run DFT_HSPL_WP7FG1_INSTALL.exe (with administrative rights to access USB)
4. Mindfully reads information text. Press “Next” button.
5. Proper drivers already must be installed in RSPL step.
6. Press “Next” button in the wizard. It should detect your phone.
7. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
8. After successful connection it should show device codename and allows to choose HSPL or OSPL version to install. OSPL means you install stock SPL back.
9. Check device codename, if something wrong turn off computer and run to the nearest forest. Grab some water with yourself.
10. Press “Next”. Wait until comes final page.
11. Device will reboot and start to boot OS.
12. Reset it and enter SPL mode again. Be sure there HSPLX.Y.Z and “CotullaHSPL” appear.
13. Put some feedback in this thread for community and developers.
Now u are ready
you can find what custom rom you want i used dynamics v2.0 which can be found here and its fully unlocked aswell so all i all im pleased with it
http://forum.xda-developers.com/showthread.php?t=1520352
download it and install the same way we installed the 1.24 rom in the begining of this post
i hope this helps i just answered here coz no1 else has and i did the same a few days ago all on my own after much much reading haha
good luck report back
beany2009 said:
Hi i was new to all this and installed dynamics v2.0 fully unlocked rom the other day and this is how i went about it
Click to expand...
Click to collapse
Great guide, dude - this was exactly how I did mine too.:good::good:
Base on his firmware .707 he won't be able to use ansar orange Rom to downgrade his bootloader, has to use the Y cable to downgrade.
are you sure mate from looking at his OS version and firmware he has been updating in zune obviously and looks upto date the same as what i did and worked ok for me
i didnt check my firmware before hand tho just went about it and installed everythign
---------- Post added at 10:33 AM ---------- Previous post was at 10:20 AM ----------
Girthmeister said:
Great guide, dude - this was exactly how I did mine too.:good::good:
Click to expand...
Click to collapse
cheers pal
ah never mind lol i have .401
Mirror broken
beany2009 said:
download this
<LINK>
Click to expand...
Click to collapse
Do you have another mirror? This one has been exceeded its download count because of encryption.
Give me 30 mins ill upload it to zippyshare
---------- Post added at 03:05 PM ---------- Previous post was at 02:22 PM ----------
you can follow the new tutorial here good luck
http://forum.xda-developers.com/showthread.php?t=2200702
Please Help me to install RSPL/HSPL on my htc 7 mozart
I am not able to install Rspl to my phone.
After follow all steps in ( DFT_RSPL_WP7FG1_LAUNCH ) it says successfully change Spl to Rspl but there's all same.
and not change to Rspl.
Please Guide my.
PHONE INFORMATION :
Name: HTC 7 Mozart
Model: HTC 7 Mozart
Software: Windows Phone 7
Total Storage: 7.20 GB
Available Storage: 5.58 GB
OS Version: 7.0.7004.0
Firmware revision number: 2250.09.12210.061
Hardware revision number: 0004
Radio software version: 5.50.09.18_22.24.50.09U
Radio hardware version: A.102.0.D4
Bootloader version:1.22.2250.10(110809)40
Chip SOC version: 2.2.5.0
MAC address: F8-DB-7F-86-89-79
SIM ID: 89910704910009427355
INFORMATION DISPLAYED when switching on the phone with volume down button :
IN RED _________
PD67*** MFG SS-BC (4K)
SPL-1.22.2250.10(110809)
MicroP(LED) 0X07
TOUCH C1(v69)
IN GREEN_________
SD SANDISK 7580MB CLASS0
Partition Info-v211v413
IN BLUE______________
IN WHITE_____________
Serial
Related
I have a HTC HERM200, I did a hard reset, the problem is that no radio version and no protocol version displayed device information in parameters and of course impossible to operate my pocket pc as a phone and call using it !
I tried the hard spl 7.
for the 'info 7', this is the result :
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.10.Olipro
Built at: Apr 22 2007 13:32:26
Copyright (c) 1998-2007 Modified By Olipro - Hard-SPL
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
(in windows, my version of herm is 200, here with the info_7 command it is herm100 !)
when typing 'rtask a', the answer is always command error !!!
how can I install the radio and is there a good version of WM6 compatible with my reference ?? if you can help me this will great for me
thanks !!!
Try reinstalling the shipped rom. You can also try a radio only rom but if neither of these 2 things work, you have a brick on your hands...
Sorry...
reinstalling shipped rom
thanks ultramag69 for your reply,
where can I download a good functional and compatible version for the shipped rom to my herm200 and how to proceed. I tried different version with unsuccess.
I tryed the 'HERM_Radinly_1.56.70.11_CustomRUU' using my sdcard proceeding with renaming the file .nbh to HERMIMG.nbh, the setup stopped at about 10%, and still there for more then 2 hours !!
installing with the usb cable stop always with error#262!
I wish I have a brick on your hands, this means that there is a way to recover the phone operational state !!
"Shipped ROM" means the rom that came on your Hermes. Generally a carrier has its own rom (you should be able to find on the carriers website).
Since you have Hard SPL on your Hermes use the sd card method.
1. format sd card fat32, copy .nbh file onto it & rename to "hermimg.nbh". Put back in Hermes.
2. Reset into bootloader - hold power,, ok button above flywheel and reset with stylus. hold in until tri-colour screen comes up.
3. If you did 1st 2 steps properly then follow the prompts.
This may take a while for the radio to install so give about 20-30 mins. Make sure you do this with a charged battery.
If this doesn't work then I'm sorry, but you have a brick...
You can still install an OS only rom but you won't have phone functionality again...
You can also try a radio only rom.. Above conditions apply...
Good Luck.
Hello,
I have a big problem with my german HTC Mozart ( T-Mobile version ).
2 weeks ago I flashed a RUU Rom to unbrand my mobile.
With this Software version my mobile is still branded and don´t work correct.
I would write more about the problems whith my mobile and this firmware, but my English is to bad….
After that I can´t flash any other Rom.
I tested to Install many other Roms, but the RUU installer every time says “Wrong Model ID”.
Then I looked my Phone Informations and see:
OS Version: 7.0.7004.0
Firmware revision number:2250.09.12803.111
Hardware revision number: NA
radio software version: 5.52.09.16_22.33a50.10U
radio hardware version: 0.0.0.0
Bootloader Version: 1.28.2250.3(113810)
Chip-SOC: 2.2.5.0
With the Rom, I flashed should be something wrong…
The Information on my Boot Mode Screen ( Rainbow) should be wrong, too
MOZA100 SS-BC (4K)
SPL-1.28.2250.3(113810)
MicroP (LED) 0x07
Touch C1(v69)
SD SANDISK 15193MB Class0
Partition Info-v211v413
In a german forum I found the same problem , but there are no solution.
Also I tested, to flash with a Goldcard.
I read all instructions to create a Goldcard an how to use it in this forum.
I think my created Goldcards are all OK but the USB HOST Screen every time says:
1. Loading
2. Checking…
3. And 3 second Later Serial on the bottom of the Display, but nothing else is happens..
Any Ideas?
so you have this problem for two weeks now?
what rom did you flash?
check the mozart forums:
http://forum.xda-developers.com/forumdisplay.php?f=779
and maybe this will help you:
http://forum.xda-developers.com/showpost.php?p=12120618&postcount=6
Yes, i have this problen for 2 weeks now.
It was a unbranded T-Mobile 1.28 rom.
Thanks, i have found someone else, with the same Problem, but no Answers.
see here
I have my Goldcards created with Ubuntu and Windows... Ubunto to find the CID and Windows, to create it...
And it seems to work, because the mobile is loading and checking the rom of the goldcard, but 3 seconds after checking... is the serial messeage in the bottom of the display and checking.. on the top, but nothing happens...
I had the same problem with my HTC 7 Trophy, flashing a new ROM did not work, and it changed the Model ID of the Phone. Once that has happened there is no way to flash a different ROM.
I tried various tools to try and get the Model ID changed back, if you use MTTY you can read the Model ID, but I don't think you can change it with that tool.
In the end I had to send mine to back to HTC to get the mainboard replaced.
hm sounds very bad..
but i think i saw the awnser somewhere...
try checking other wp7 devices forums,
hd2 people are very active..
hd7 people too...
somewhere ive read about some "force rom download mode" by pressing camera button on boot too, dont know if there was truth in it...
you say you had the t mobile 1.28 installed or you did try to install it?
it is not "unbranded" if its from tmobile (or do i get the term unbranded wrong?)
i belive there are 3 different t-mobile roms: TMO-DE, TMO-CZ, TMO-AT
these are all branded roms,
if you want unbranded you get: HTC-EU or HTC-Generic
ive used this method to unbrand my mozart from tmode 1.25 to tmode 109 to HTCEU 1.28
if you come from TMODE (as a german you should) you may want to try the 109 rom (works without goldcard)
so that i understand right, you can use the OS but you cannot make calls because of the cooked radio?
Hi, I have a German rom 1.28 installed, because i only can choose German or English language, but I do not remember which version it was. I think I previously had to install a 1.09.
However, there is something not been in order.
I think that the "force download mode" for this time is just for Zune, but I try to search for more information.
If I could flash any firmware I would do, but there is the problem with my "Model ID".
I think, the goldcard method is the right way, but it don´t works.
To eliminate errors about my hardware ( selfmade y-cable and hama 19in1 usb-cardreader ) I have ordered a delock y cable and a single usb-sd reader to try it on weekend again, but I think, the hardware is not my problem.
But i can test it not before weekend, because I´m a truck driver and only on the weekend at home.
Phone calls can I do with this firmware.
My display is out, if I choose a phone number. This time I only can hang up with the headset or by take out the battery
It works again until the other person accepts the call or the mobile hangs up automatically after 8 or 10 rings.
The volume of the headset ( earphones and micro), with this firmware is to quiet, too.
There are many problems….
somebody else with 1.28 and problems?
you dont need goldcard to flash back to stock rom
you should be able to flash any stock tmode rom without goldcard.
try to flash 109 without goldcard.
I´ve tried to install the
“RUU_Mozart_TMO_DE_1.09.001.16_5.50.09.15_22.23.50U_Signed_by_ansar”,
but after 1% my mobile reboots and the RUU Installer says:
244 wrong “MODEL ID”
are you sure it is a german Mozart?
this rom you flashed is made for unbranding.
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=817691
just saying....
that suxx have you tried this?
Zetabit said:
Problem Solved!
Here are the steps I took to resolve the issue I was having, with the Mozart stuck at bootloader, "Enter USB Host...".
First I formatted the SD-card, then used my brothers Android phone with ASTRO File Manager to extract the CID code from the SD card.
1. Insert the SD card into the Android phone
2. Start the ASTRO File Manager
3. Navigate to sys/class/mmc_host/mmc1/mmc1:aaaa (instead of aaaa there could be something else as well)
4. Long press on the 'cid'-file
5. First select Open as, then Text
6. Then select File-Editor
7. Write down the number 1 to 1 onto your PC/Mac
Once I had the CID code, I used http://psas.revskills.de/?q=goldcard to generate & email me the goldcard image file.
I formatted the SD card at this point, FAT32, 4096 sector size.
I then used HxD Hex Editor and Disk Editor to copy the goldcard.img into the first sector the SD card.
Heres how:
1. Run HxD as Adminstrator
2. Open the SD card by going to Extras > Open Disk > Physical Disks (important) > Removable Drive. Make sure Open as Read only is unchecked.
3. Open the goldcard.img by going to Extras > Open Disk Image.
4. From the goldcard.img, Select All and Copy all bytes.
5. Paste into the first 384 bytes of the SD card - offset(h) 0x0 - 0x170.
Next I copied a European ROM on the the SD card (in explorer as you would with any file) and rename it to MOZAIMG.nbh
With the Y-cable I booted the phone and to my disbelief it started and successfully reflashed the phone.
http://www.youtube.com/watch?v=0t_xNdf9DeQ&feature=player_embedded
Hope this helps!
Click to expand...
Click to collapse
there has to be a way to fix it.. or maybe not
the other guy said he got his mainboard changed, maybe you broke it.. damn...
@pik.
I have tested to flash the "RUU_Mozart_TMO_DE_1.25.111.05_5.50.09.18_22.24.50_RELEASE", but after 1% the same problem "Invalid Model ID"
@webwalk®
I have created the gold card according to these instructions.
I have no Android phone, so I have the part to find out the cid solved with an Ubuntu Live CD and my built-in Cardreader.
The goldcard seems to work, since it goes from loading in checking..., then it is always the same on serial
Edit: Yes, I´m sure, that it is a German HTC Mozart.
i've the same problem with 1.28
can someone help us?
i have the same question
my hardware version is also NA
dsmps said:
Hello,
I have a big problem with my german HTC Mozart ( T-Mobile version ).
2 weeks ago I flashed a RUU Rom to unbrand my mobile.
With this Software version my mobile is still branded and don´t work correct.
I would write more about the problems whith my mobile and this firmware, but my English is to bad….
After that I can´t flash any other Rom.
I tested to Install many other Roms, but the RUU installer every time says “Wrong Model ID”.
Then I looked my Phone Informations and see:
OS Version: 7.0.7004.0
Firmware revision number:2250.09.12803.111
Hardware revision number: NA
radio software version: 5.52.09.16_22.33a50.10U
radio hardware version: 0.0.0.0
Bootloader Version: 1.28.2250.3(113810)
Chip-SOC: 2.2.5.0
With the Rom, I flashed should be something wrong…
The Information on my Boot Mode Screen ( Rainbow) should be wrong, too
MOZA100 SS-BC (4K)
SPL-1.28.2250.3(113810)
MicroP (LED) 0x07
Touch C1(v69)
SD SANDISK 15193MB Class0
Partition Info-v211v413
In a german forum I found the same problem , but there are no solution.
Also I tested, to flash with a Goldcard.
I read all instructions to create a Goldcard an how to use it in this forum.
I think my created Goldcards are all OK but the USB HOST Screen every time says:
1. Loading
2. Checking…
3. And 3 second Later Serial on the bottom of the Display, but nothing else is happens..
Any Ideas?
Click to expand...
Click to collapse
i also have this problem,somebody say that use the "JTAG"can fix it.
does anybodu solve this problem on mozart?
regards
please help if you can i cant flash any rom and i want to go to dft
please help i cant flash anything please any solution
my problem is very similar to yours. i have tmob de mozart too and this vender id error after flashing an official europe rom....
i ordered goldcard tools from amazon but they arent here maybe in three days. but i think it would be the same problem as yours.
->
i had at first the dynamics7 1.00 mango rom installed on my htc mozart.
after that i made rspl to 1.28.
after that i tried to install RUU_Mozart_S_HTC_Europe_5.12.401.02_5.71.09.02a_22 .51.50_RELEASE. the flashing started. than the phone restartet and installed spl 5.12 but the flashing doesent went to finish because of vendor id error.
now i cannot flash any stock tmob de or htc europe rom because of vendor id error. (clear because of spl 5.12) but the slspl rom doesent work, too. every flashing stops at 1%....
PD 67100 SS-BC (4K)
SPL-5.12.2250.2 ( 135167) MNG
os 7.10.8107.79
firmware 2250.21.51301.401
hardware 0004
radio 5.71.09.02a_22.51.50.21U
radiohardware A.102.0.D4
bootloader 5.12.2250.2 (135167)
any solution for me? is it maybe possible to send lower spl via cabsender?
Don't use wrong ver
aggelosss5 said:
please help if you can i cant flash any rom and i want to go to dft
Click to expand...
Click to collapse
Be carefull with DFT i halfbricked my bootloader, now I cant flash any rom, can't use the phone.
I am looking for new method maybe JTAG is the only way out of this.
Thank if helpful:good:
[DFT Freedom ROM] Mondrian mango 7720 V2 version
Updates:
20 Langs in one rom USA_ENG_FRA_ITA_GER_ESN_NLD_DAN_FIN_NOR_SVE_PTB_ PTG_RUS_ELL_HUN_CSY_PLK_JPN_KOR
Replace RUU_Mondrian_S_Cingular_US_4.03.502.00_5.69.09.05a_22.50.50_RELEASE new driver
Replace some of the new HTC XAP (from Titan ROM or Radar ROM or Market )
Open Internet sharing
Fully unlock with IE download XAP , can be immediately downloaded and install it , see picture under
XAP unlimited installation, dozens of XAP than can be installed, I installed more than 30 XAP which download from the market, fixed market XAP update/install issue from DFT Freedom 7720 version.
ROM built-in HTC Deck , Tango, TouchXplorer, Registry Editor, in the pass XAP only can be installed via computer, DFT developed DFTInstall.exe so now all the XAP can be build-into custom ROM , of course need to see will be over the size of 512, this tool is strictly prohibited any theft, unauthorized use exception.
Important Note
1. Before doing anything, make sure you have more than 50% battery!
2. You must have RSPL / HSPL installed on your device, download RSPL / HSPL see this http://www.darkforcesteam.com.cn ... & extra = page% 3D1
3. Supported Operating Systems: Windows XP, Windows Vista, Windows 7.
Disclaimer
This product is free of charge, at your own risk. We do not have any conflict, fault, or damage caused by the process of responsibility. Implied or otherwise, if you agree that any use of the product warranty. Did not find the problem, several different devices simultaneously to test this product, your experience may vary.
Products used for commercial purposes is strictly prohibited, and prohibited xda.cn & wpxap forum and reproduced with the use of intellectual ROM
For the protection of the DFT our official website and XDA - developers.com, it is not allowed within 5 days reproduced in this ROM, the column name well-known owners of this forum the forum three days after the group can reproduced without the application after five days free reproduced, reprinted, be sure to indicate the DFT produced the original post and add links
# Strongly prohibit any use made of the DFT ROM resources,
20 language versions download here
Code:
Password: 11/08/2011 @ DFT
Dark Forces Team Special thanks to TouchXplorer & Registry Editor author Julien Schapman allows us to these two software built into ROM.
Official DFT site (Chinese)
DarkForcesTeam Nov,2011
http://www.youtube.com/watch?v=KyTniK4AXUE&feature=channel_video_title
invalid password
Thanks a lot. I'll test.
@agushaha: have a space before 11/08/2011 @ DFT.
my current OS version is 7.10.7720.68
my device is an at&t surround
can I install this on my device? i have not yet installed hspl / rspl.
i cant open the file....
do you lnow why?????
nacho685 said:
i cant open the file....
do you lnow why?????
Click to expand...
Click to collapse
Chances are that you put the password in incorrectly
Thank's it's work
bmamo said:
my current OS version is 7.10.7720.68
my device is an at&t surround
can I install this on my device? i have not yet installed hspl / rspl.
Click to expand...
Click to collapse
I also would like to try this. Is there a tutorial on how to get this installed??. Got the same OS version.
Thxs
hi guys,
I can't unzip. I have the latest winrar. I tried the password with and without the first space...
space before but no space between then.
perfect!
password is:
" 11/08/[email protected]" (without the ")
thanks
Advanced Config Not Working
Not sure if its a bug but it appears advanced config does not work with this rom.
I miss my custom grey theme already
NVM Reboot fixed it
My attempt at a tutorial
jesusodin said:
I also would like to try this. Is there a tutorial on how to get this installed??. Got the same OS version.
Thxs
Click to expand...
Click to collapse
Here is my attempt at a tutorial
Step 1: take anything important off your phone (Pictures Videos Music Etc) Because installing all this stuff will erase your phone completely
Step 2: Go and read the first post in this thread
http://forum.xda-developers.com/showthread.php?t=1195647
Once you have read it, READ IT AGAIN!, because if you flash that to your phone and its not compatible you will BRICK YOUR PHONE.
Once you are sure that your phone is compatible with the RSPL/HSPL download it and use the included tools to flash it to your phone. You will need to put your phone in bootloader mode to install that. To do this you will turn the phone off completely then press power + the volume down button to get to your boot loader screen it will be red green blue and white.
Connect your phone start the RSPL app and follow the steps to the letter, once this is down download the rom posted in this thread.
Step 3: Flash the rom posted in this thread by using the same steps. Power off the phone, then press power + volume down button when you see the bootloader start the flashing process. You will get a progress bar let it go through until the phone reboots.
Step 4: Enjoy a truly amazing rom on your Surrond, thank you so much DFT.
HTC update?
Got this "update" last night, does anybody know what it does???
Don't update. Your phone will become a brick if you update.
I tested. There are a few minor bugs eg: Errors column waves 3G,misspelled in the About
Model: HTC Mondrian
Carrier: HTC Sunnound T8788
Thank so much.
hello
When you unzip the file gives error unknown format or damaged
regards
rob243 said:
Here is my attempt at a tutorial
Step 1: take anything important off your phone (Pictures Videos Music Etc) Because installing all this stuff will erase your phone completely
Step 2: Go and read the first post in this thread
http://forum.xda-developers.com/showthread.php?t=1195647
Once you have read it, READ IT AGAIN!, because if you flash that to your phone and its not compatible you will BRICK YOUR PHONE.
Once you are sure that your phone is compatible with the RSPL/HSPL download it and use the included tools to flash it to your phone. You will need to put your phone in bootloader mode to install that. To do this you will turn the phone off completely then press power + the volume down button to get to your boot loader screen it will be red green blue and white.
Connect your phone start the RSPL app and follow the steps to the letter, once this is down download the rom posted in this thread.
Step 3: Flash the rom posted in this thread by using the same steps. Power off the phone, then press power + volume down button when you see the bootloader start the flashing process. You will get a progress bar let it go through until the phone reboots.
Step 4: Enjoy a truly amazing rom on your Surrond, thank you so much DFT.
Click to expand...
Click to collapse
that thread says this:
WARNING TO ALL:
Do NOT use RSPL / HSPL with Mozart 4.XX and other RUU ROMS with MANGO.
All WP7F devices affected: MOZART, GOLD, SCHUBERT, MONDRIAN, SPARK!
It will damage your device. Not a joke.
MORE INFORMATION HERE
--------
I have mango. therefore i understand i cannot change the rom am i right?
on the 3 colour screen i get the following:
PD26100 SS-BC (4K)
SPL-4.3.2250.0(128976) MNG
MicroP(LED) 0x09
TOUCH C1(v69)
Am I stuck on Mango?
Downgrade????
this is correct do not use the rspl/hspl if the numbers for the versions do not match
I had originally installed mango using the disconnect trick what I needed to do to install this was use the stock rom for my phone/provider to downgrade first for me it was Telus my provider, I found the rom here to put me back to pre-nodo like the phone was fresh out of the box.
THEN I was able to do the rspl/hspl then the DFT rom.
Also check under your battery for the model ID and verify its compatible with those posted in the RSPL/HSPL thread the model ID on my phone is PD26110 I can confirm with a pre-nodo rom and that model ID the rspl/hspl and the dft rom work perfectly
hello
someone upload the rom to another server and that gives me this error or damaged
regards
Hi XDA-Devs, i have here a german T-Mobile HTC Mozart and want to flash it with an newer Rom. I can connect the Phone with Zune on my Win7 PC, but the Windows Mobile Device Center can not find my Mozart.
I have download this Rom > http://forum.xda-developers.com/showthread.php?t=1359397 and extract it with 7zip to my desk.
Than ill tryed to boot the phone with Powerbutton+VolumeDown to the Bootloader Mode "Serial" than i connect the Phone via USB-Cable to PC, "Serial" switched to "USB". In the first Steps, the RomUpdateUtility don not display me information about the current image, in the next step i can click "Update", on the next page i also can not see information about the current version. After this i started the RomUpdateUtility, i see a ProcessBar on PC and Phone, but all the time on 0% of process , after a few minutes i become the following error: "Error 262 The Update Utility has encountered communication errors during the update process"
What is the problem?
Hi friend.. can you post here the info about your phone?? You can found in Settings->Information.
Example..
O.S Version:
Firmware:
Radio:
ecc.ecc.
And... Have you Mango??
OS: 7.0.7392.0
FirmWare: 2250.21.13301.111
HW: 0004
Bootloader: 1.33.2250.1(123643)
ChipSoc: 2.2.5.0
??
metatrixter said:
Hi XDA-Devs, i have here a german T-Mobile HTC Mozart and want to flash it with an newer Rom. I can connect the Phone with Zune on my Win7 PC, but the Windows Mobile Device Center can not find my Mozart.
I have download this Rom > http://forum.xda-developers.com/showthread.php?t=1359397 and extract it with 7zip to my desk.
Than ill tryed to boot the phone with Powerbutton+VolumeDown to the Bootloader Mode "Serial" than i connect the Phone via USB-Cable to PC, "Serial" switched to "USB". In the first Steps, the RomUpdateUtility don not display me information about the current image, in the next step i can click "Update", on the next page i also can not see information about the current version. After this i started the RomUpdateUtility, i see a ProcessBar on PC and Phone, but all the time on 0% of process , after a few minutes i become the following error: "Error 262 The Update Utility has encountered communication errors during the update process"
What is the problem?
Click to expand...
Click to collapse
is 1st time you try to install a Custom Rom?have you installed Rspl/Hspl ??
yeah first time, and whats Rspl/Hspl? Where i become this?
Always Read first some guides before you do anything ...
metatrixter said:
yeah first time, and whats Rspl/Hspl? Where i become this?
Click to expand...
Click to collapse
This is Usually things to do for Flash Custom Rom. For make your phone "flashable" with custom roms(no official roms) you need to install RSPL/HSPL.
1. If you have MANGO with SPL 4.xx or 5.xx in your device, flash a NODO Rom first to downgrade SPL otherwise you´ll brick it.
2. You must have RSPL/HSPL installed in your device , download RSPL/HSPL see this thread HERE.
3. Before doing any operations be sure you have battery level more than 50%!
4. Now flash Custom Rom you download and extract before.
Warranty Issues
Be warned, using RSPL may void your warranty.
If you need to send your device to a Repair Centre, make sure that it looks like stock! Install stock official ROM before go to Repair Centre.
And Please.. Read Always Full guides before do anything.... It prevent to brick your phone
problem solved, the missing RSPL/HSPL, thanks a lot
Hi guys,
I'm new here and sorry by mistakes.... I would like to know how can i jailbreak my HTC MOZART, step by step.
OS version: 7.10.8773.98
Firmware revision number: 2250.21.51205.707
Hardware revision number: 0004
Radio software version: 5.69.09.05a_22.50.50.21U
Radion hardware version: A.102.0.D4
Bootloader version: 5.12.2250.5 (139188)
Chip SOC version: 2.2.5.0
Thanks a lot =D
Hi++
First of all : please use search before making a new thread (There is so many thread for windows phone / htc mozart unlocking )
--All the informations in this post belongs to this thread++
++HERE ARE THE STEPS TO UNLOCKING YOUR MOZART SO YOU CAN FLASH ANY CUSTOM ROM!
Step 1 - Know your region!
You can check check your region by going to:
Settings > about > click More Info button > Firmware revision number
e.g. Firmware revision number: 2250.09.16101.707
Your region is: 707
and your phone ROM version is: 1.61.707.01
So you belong in HTC_ASIA
refer here: http://forum.xda-developers.com/showthread.php?t=915827
Step 2 - Download your official ROM
So after confirming you're that for example you have HTC_ASIA, you can download your ROM here
http://forum.xda-developers.com/show...0.09U_by_ansar
2.1 - Extract the compressed file
2.2 - Make a copy of RUU_Signed.nbh and rename it to MOZAIMG.nbh
Step 3 - Make your own Y-CABLE
It's extremely easy to make one. If you have already created or bought one then
Step 4 - Get a 1GB MicroSD Card
Guys, don't be hard headed, just get a 1GB MicroSD card if you want to have a flawless unlocking your phone.
4.1 - Reformat it with FAT32 File System and use "Default Allocation Table"
4.1 - Copy the MOZAIMG.nbh file to the root of your MicroSD Card.
Step 5 - Patch it with GoldCard tool
Make sure that you copied MOZAIMG.nbh
5.1 - Run GoldCardTool.exe
5.2 - Make sure the select HTC MMC is your newly reformatted MicroSD Card.
5.2 - Load GoldCard.img (the file is included in GoldCardTool_0.0.5.7z)
5.3 - If the patching was a success, then you're now safe for Step 6
Step 6 - Get everything setup and prepare your:
PC - Reboot! So to make sure everything is refreshed.
Phone - Take off the battery, put it back, turn in on while pressing VOL_DOWN_KEY + CAMERA_BUTTON until the screen said "USB HOST MODE"
Card Reader and MicroSD Card - Am pretty sure you know what to do
Y-CABLE - Connect your Phone and Card Reader and connect the male usb to one of the USB ports at the back of your PC (laptop? then just connect it)
Step 7 - Kiss your phone because the downgrading process will begin
Don't worry if after connecting, and still said "USB HOST MODE" because it will take about 3 - 5 minutes before the flashing begins. If it didn't start after like, give it a 7minutes grace period, then remove the Card Reader and put it back again. Still didn't work? Go get a new card reader
The downgrading process will reboot your phone once after it said
RADIO: OK then after it reboots, it will go back to "USB HOST MODE" and will say "Loading ..." immediately, if you didn't saw that, remove the Card Reader and insert again .. but again, the flashing will restart so it will go back to flashing the Radio again.
If everything went well, and you saw the "SUCCESS" message, you can reboot your phone and go to bootloader to check the SPL version. If the SPL version was successfully downgraded to 1.## then it's you lucky day! You can now move on to Step 8
Step 8 - DFT's RSPL and HSPL
Download those and refer to their manual http://forum.xda-developers.com/show....php?t=1195647 . If those didn't go well, then make sure you read everything it saids on their manual.
If that goes well, confirm it by rebooting and going to the bootloader, and you'll see the "HSPL" instead of "SPL" then the version.
If you saw the "HSPL" then you're safe to flashing your first
CUSTOM MOZART ROM!
If everything went well, you can have your Mozart unlocked with less than 30minutes
Disclaimer:
All of those steps were tested and proven. If something went wrong and your phone was bricked, then I don't take any responsibility of your actions. so make sure to read, read, read, and read!
Goodluck !!
SPIDER-7 said:
Hi++
First of all : please use search before making a new thread (There is so many thread for windows phone / htc mozart unlocking )
--All the informations in this post belongs to this thread++
++HERE ARE THE STEPS TO UNLOCKING YOUR MOZART SO YOU CAN FLASH ANY CUSTOM ROM!
Step 1 - Know your region!
You can check check your region by going to:
Settings > about > click More Info button > Firmware revision number
e.g. Firmware revision number: 2250.09.16101.707
Your region is: 707
and your phone ROM version is: 1.61.707.01
So you belong in HTC_ASIA
refer here: http://forum.xda-developers.com/showthread.php?t=915827
Step 2 - Download your official ROM
So after confirming you're that for example you have HTC_ASIA, you can download your ROM here
http://forum.xda-developers.com/show...0.09U_by_ansar
2.1 - Extract the compressed file
2.2 - Make a copy of RUU_Signed.nbh and rename it to MOZAIMG.nbh
Step 3 - Make your own Y-CABLE
It's extremely easy to make one. If you have already created or bought one then
Step 4 - Get a 1GB MicroSD Card
Guys, don't be hard headed, just get a 1GB MicroSD card if you want to have a flawless unlocking your phone.
4.1 - Reformat it with FAT32 File System and use "Default Allocation Table"
4.1 - Copy the MOZAIMG.nbh file to the root of your MicroSD Card.
Step 5 - Patch it with GoldCard tool
Make sure that you copied MOZAIMG.nbh
5.1 - Run GoldCardTool.exe
5.2 - Make sure the select HTC MMC is your newly reformatted MicroSD Card.
5.2 - Load GoldCard.img (the file is included in GoldCardTool_0.0.5.7z)
5.3 - If the patching was a success, then you're now safe for Step 6
Step 6 - Get everything setup and prepare your:
PC - Reboot! So to make sure everything is refreshed.
Phone - Take off the battery, put it back, turn in on while pressing VOL_DOWN_KEY + CAMERA_BUTTON until the screen said "USB HOST MODE"
Card Reader and MicroSD Card - Am pretty sure you know what to do
Y-CABLE - Connect your Phone and Card Reader and connect the male usb to one of the USB ports at the back of your PC (laptop? then just connect it)
Step 7 - Kiss your phone because the downgrading process will begin
Don't worry if after connecting, and still said "USB HOST MODE" because it will take about 3 - 5 minutes before the flashing begins. If it didn't start after like, give it a 7minutes grace period, then remove the Card Reader and put it back again. Still didn't work? Go get a new card reader
The downgrading process will reboot your phone once after it said
RADIO: OK then after it reboots, it will go back to "USB HOST MODE" and will say "Loading ..." immediately, if you didn't saw that, remove the Card Reader and insert again .. but again, the flashing will restart so it will go back to flashing the Radio again.
If everything went well, and you saw the "SUCCESS" message, you can reboot your phone and go to bootloader to check the SPL version. If the SPL version was successfully downgraded to 1.## then it's you lucky day! You can now move on to Step 8
Step 8 - DFT's RSPL and HSPL
Download those and refer to their manual http://forum.xda-developers.com/show....php?t=1195647 . If those didn't go well, then make sure you read everything it saids on their manual.
If that goes well, confirm it by rebooting and going to the bootloader, and you'll see the "HSPL" instead of "SPL" then the version.
If you saw the "HSPL" then you're safe to flashing your first
CUSTOM MOZART ROM!
If everything went well, you can have your Mozart unlocked with less than 30minutes
Disclaimer:
All of those steps were tested and proven. If something went wrong and your phone was bricked, then I don't take any responsibility of your actions. so make sure to read, read, read, and read!
Goodluck !!
Click to expand...
Click to collapse
worked for me thanks you so much !!!
Hi guys,
I'm new here and sorry by mistakes.... I would like to know how can i jailbreak my HTC MOZART, step by step.
OS version: 7.10.8773.98
Firmware revision number: 2250.21.51201.206
Hardware revision number: 0004
Radio software version: 5.71.09.02a_22.51.5021U
Radion hardware version: A.102.0.D4
Bootloader version: 5.12.2250.1 (134400)
Chip SOC version: 2.2.5.0
Thanks a lot =D[/QUOTE]
sir_erick said:
Hi guys,
I'm new here and sorry by mistakes.... I would like to know how can i jailbreak my HTC MOZART, step by step.
OS version: 7.10.8773.98
Firmware revision number: 2250.21.51201.206
Hardware revision number: 0004
Radio software version: 5.71.09.02a_22.51.5021U
Radion hardware version: A.102.0.D4
Bootloader version: 5.12.2250.1 (134400)
Chip SOC version: 2.2.5.0
Thanks a lot =D
Click to expand...
Click to collapse
[/QUOTE]
It's already posted above, STEP by STEP.. unlocking is almost similar to jailbreaking.. if you already have a fully unlocked rom/firmware running on your device, it would be capable of installing and running apps outside the marketplace.
It's already posted above, STEP by STEP.. unlocking is almost similar to jailbreaking.. if you already have a fully unlocked rom/firmware running on your device, it would be capable of installing and running apps outside the marketplace.[/QUOTE]
step 2 official rom
404 Page Not Found
The page you requested was not found.
DELETED
I have dont
Tkank