Hello forum,
I am interested in creating a recovery PDA file that I can flash for odin of my Samsung Galaxy Player 5. Could someone go about telling me how it could be done? Thanks in advance.
Jisrest said:
Hello forum,
I am interested in creating a recovery PDA file that I can flash for odin of my Samsung Galaxy Player 5. Could someone go about telling me how it could be done? Thanks in advance.
Click to expand...
Click to collapse
Your mean is you want to backup data in your device？
I think you can use an application named Titanium Backup.
I have no authority to send links.You can search it on the Internet.:silly:
Jisrest said:
Hello forum,
I am interested in creating a recovery PDA file that I can flash for odin of my Samsung Galaxy Player 5. Could someone go about telling me how it could be done? Thanks in advance.
Click to expand...
Click to collapse
On device as root
Code:
dd if=/dev/block/mmcblk0p13 of=/sdcard/factoryfs.rfs
dd if=/dev/block/mmcblk0p11 of=/sdcard/zImage
On pc, put those two files (from /sdcard) in a tar archive.
Would the terminal Emulator do this correctly?
Jisrest said:
Would the terminal Emulator do this correctly?
Click to expand...
Click to collapse
Yes, as long as you run su to give you root access.
Thanks! I will try in a few to see how this goes.
Would this save my account information, WiFi passwords, etc?
Jisrest said:
Thanks! I will try in a few to see how this goes.
Would this save my account information, WiFi passwords, etc?
Click to expand...
Click to collapse
No. That just saves your rom and kernel. For backup purposes, you will need mmcblk0p10 (efs - your wifi and bluetooth addresses), mmcblk0p14 (dbdata), and mmcblk0p16 (/data). mmcblk0p17 is your media/downloads/whatnot, but obviously you cannot copy it into itself. I just don't know the appropriate names for an Odin tar.
And in case you were wondering, partition 1 is an extended partition holding everything else, 2-4 are not used, 5-9 are for the bootloaders, 12 is a backup kernel, and 15 is cache.
You're really helpful and insightful, thank you for your time!
Last question, sorry for being a novice. But.. once I am done with the terminal Emulator, save it as a tar.md5 file and it'll be flashable on odin?
Jisrest said:
You're really helpful and insightful, thank you for your time!
Last question, sorry for being a novice. But.. once I am done with the terminal Emulator, save it as a tar.md5 file and it'll be flashable on odin?
Click to expand...
Click to collapse
No problem.
You will need to transfer the two files to your computer, and use a tool like 7-zip to add them to a tar archive. The tar file's name should not end in .md5, or Odin will expect it to have extra data that isn't there.
I get a failure whenever I attempt to flash with Odin.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factory.rfs
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Jisrest said:
I get a failure whenever I attempt to flash with Odin.
Click to expand...
Click to collapse
It should be factoryfs.rfs.
7-Zip is renaming it.
Tried for a third time, and got this error..
Code:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> factoryfs.rfs
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Maybe it's that I don't have PARAM, SBL, and BOOT?
Doing further testing I believe its my player acting up.
Jisrest said:
Tried for a third time, and got this error..
Code:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> factoryfs.rfs
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Maybe it's that I don't have PARAM, SBL, and BOOT?
Doing further testing I believe its my player acting up.
Click to expand...
Click to collapse
I'm not sure what your issue is -it seems right- but I hope you still get it to work.
Thank you.. but im giving up. I guess im not meant for this.
Related
iam tryin to load my stock rom bt i am not able to update it... i tried to root my phone .. when i tried to load the insecure kernal the yellow exclamation came up nd den it neva booted .. now i am tryin to load the stock rom bt it failed .. can any1 help me
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
rom : xwkf3
India
I think its because you did something with the PIT or the re-partiton section in Odin. Check if these areas are untouched. The box next to PIT should be left blank, and the re-partition checkbox should be left unchecked.
Of course, I may be wrong, I'm a newbie myself. :/
crobat said:
I think its because you did something with the PIT or the re-partiton section in Odin. Check if these areas are untouched. The box next to PIT should be left blank, and the re-partition checkbox should be left unchecked.
Of course, I may be wrong, I'm a newbie myself. :/
Click to expand...
Click to collapse
the pit and the repartition was untouched
Its common to see this if u tried to shift between a CM7 based ROM and the stock ROM. U will need to put your phone in download, add pit and other files, tick re-partition and flash the stock ROM. Then u will be able to boot normally.
I think there is a problem with the rom, maybe download problem, or it's not suitable for your mobile.
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
Same issue with me, have you got any solution to this? I have tried all resorts but getting stuck at below -
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i din get any solution
please close this thread
My phone has gone into emergency recover and I've tried to recover it by flashing it with both "Odin" and the samsung "SimpleUpgradeTool" but it has failed everytime I've tried it.
I have the SCH-530 from US Cellular and am unsure on what to try next.
Any and all help is greatly appreciated.
The following is the ouput message from Odin ---
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
mdahlke said:
My phone has gone into emergency recover and I've tried to recover it by flashing it with both "Odin" and the samsung "SimpleUpgradeTool" but it has failed everytime I've tried it.
I have the SCH-530 from US Cellular and am unsure on what to try next.
Any and all help is greatly appreciated.
The following is the ouput message from Odin ---
Code:
Odin v.3 engine (ID:3)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.img
NAND Write Start!!
cache.img
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
While flashing with odin make sure ur kies is completly closed or from kies tools, preferences, uncheck option open kies while phone connects restart and try should work
Sent from my GT-I9500 using xda premium
I have the SCH-530 from US Cellular and am unsure on what to try next. Wrong forum its not I9300 . Firmware / mods from here will brick your phone . jje
Hi,
I am trying to install a custom ROM on my phone. I have the i9300 version and I am following this guide:
http://forum.xda-developers.com/gal...covery-clockworkmod-touch-6-0-3-2-gt-t1719744
I am using the version attached, even though it looks a little old. I have done nothing to the phone before this so it is a stock OS.
I have booted in to download mode and flashed using odin, Odin says everything went ok and does a restart:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
<ID:0/009> Added!!
After this I try to boot in to recovery mode and it is not the version I see on the video and there is no touch. The Rom I choose will then not install correctly. I guess that its not the clockwork mod, any idea on what I am doing wrong?
Thanks
-Howard
In the end of the guide there is:
"Stock Recovery being reflashed after a reboot?..."
May be You have stock recovery after reboot?
And have You tried Samsung toolkit? http://forum.xda-developers.com/galaxy-s3/orig-development/samsung-galaxy-s3-unified-toolkit-v8-0-t1703488
Hi,
Just tried that, same issue. It's like it can't get root. No errors thrown and odin seems happy and reports it's "passed"
Hey everyone
Having read many threads on this issue I would appreciate help for my specific case. I got a defective device from a friend that wouldn't start anymore (introductory Samsung animation was playing repeatedly). I then tried to flash "GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9" to eventually install CM 10.1.3 and then factory reset to make sure the brick bug is not an issue. However, I was not able to flash CWM, because it gets stuck at "NAND Write Start" and eventually fails (see below). Interestingly, I flashed another i9100 flawlessly only a few days ago with the exact same setting. Nonetheless I tried different Odin versions as well as different usb ports and cables.
I have no idea what kind of kernel or android version was running on the device and I can now only get into download mode.
When reading this guide I came across two problems. First, flashing a kernel - some other thread recommended "Siyah-s2-v5.0.1" - was unsuccessful. Second, I wasn't sure if I should try to flash the ICS version mentioned in this thread.
Some mentioned falling back to flashing PIT-files, but because recovery mode is not available, I cannot use the "emmc partition scanner" to identify the correct PIT-file to flash.
I would really like to save this device, so someone else may enjoy using it again in the future. Thanks in advance for any help!
Cheers
sNiXx
ODIN 3.09
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ODIN 1.3
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Could anyone please help me out with this issue? I would appreciate it, if I could get the device running again.
Thanks in advance for help or tips!
Hi guys.
im trying to flash G530H with odin and i have this error mesage:
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
what can i do? i tried with an pit file, but its not works
Please check that repartition is not ticked in odin