Hello
I have a RAZR XT910.
Well, i tried flashing this rom today:
[ROM][RazrCDMA/GSM][4.1.2][2-4] Jellywiz RLS5 -- Redefining Performance and Stability
http://forum.xda-developers.com/showthread.php?t=2133763&page=4
Followed all steps, installed SafeStrap, etc...
but now, i got two issues:
1) My phone signal is being unstable a lot. I applied GSM's patches, but it dididn't helped much.
2) With this rom, installed on rom slot 2 , my phone reboots every 10 minutes . Yeap, 10 minutes and it reboots...
On my stock slot, i have Verizon JB leak installed and fully-working, But i really would like to give a chance to this rom , and some others i've saw around XDA.
What should i do in that case, since i followed all the steps ?
Thanks in advance.
The reboots can be caused by the ROM itself, or the slot being corrupted. Try erasing and re creating the slot.
The signal issues may be related to radio; are you using JB radio? If so, you may need to change it back to any ICS one...
im gonna try it right now
instead of erasing the slot ill create a new one
thx in advance
Sent from my MOTOROLA RAZR using xda app-developers app
Mm I'm not sure, but most ROMs require to use only slot2
You can also try BMM, for me it's better than Safestrap.
blackhawk_LA said:
Mm I'm not sure, but most ROMs require to use only slot2
You can also try BMM, for me it's better than Safestrap.
Click to expand...
Click to collapse
I had BMM before.
I was having some trouble with it, then i removed. I find safestrap better/easier to do stuff.
Oh well, the problem continues. Rom still rebooting.
And now, after i applied the gsm patch specified to this rom, i can't use it anymore.
Everytime a process ".com.android.phone"(something like that) crashes.
I'll try again to wipe rom slot 2, clean all cache's / data, and reinstall it.
the verizon leak (official) works without problems on stock slot.
Related
pastebin<dot>com/KSv3Wn7v any one have any clue what i did here? because short of sayng the roms bad (doubt it, afaik there are other people running it.) im out of ideas. during all of this the phone is doing its best impression of a brick.
sorry for the URL hinky-ness, long time lurker, first time poster.
keastes said:
pastebin<dot>com/KSv3Wn7v any one have any clue what i did here? because short of sayng the roms bad (doubt it, afaik there are other people running it.) im out of ideas. during all of this the phone is doing its best impression of a brick.
sorry for the URL hinky-ness, long time lurker, first time poster.
Click to expand...
Click to collapse
Flash only to rom-slot 1... anything else will cause el-bricko
asuhoops8628 said:
Flash only to rom-slot 1... anything else will cause el-bricko
Click to expand...
Click to collapse
it is in slot one, http://forum.xda-developers.com/showthread.php?t=2028020 followed all the instructions, installed safestrap, verified MD5 of the rom, etc.
if you are on ICS, make sure you are downloading and flashing ICS Kernel only one. if not use the other?
I had to delete and re-create the Rom Slot, then it was ok. I skipped installing GApps for the 1st boot, then went back to do them.
Ok sorry its taken so long for me to reply, turns out i needed the ICS kernel. Wow i feel like an idiot.
Sent from my DROID RAZR using xda app-developers app
You can't go back to the ICS kernel, right? And by installing the leaked VZW OTA JB that puts me permanently on the JB kernel?
MyNameIsJeff said:
You can't go back to the ICS kernel, right? And by installing the leaked VZW OTA JB that puts me permanently on the JB kernel?
Click to expand...
Click to collapse
i never left the ICS kernal, because of how this rom gets installed (check the thread i linked) i have the stock verizon ICS installed, and cyanogenmod 10.1 (android 4.2 jelly bean) i can freely switch back and forth.
to answer your second question, as far as i know, no one has yet found a fastboot image for the stock ICS or gingerbread, so you are SOL with returning.
I just installed the build for the JB kernel posted today; http://goo.im/devs/Hashcode/spyder/cm10.1
It seems so smooth! But the camera still FCs, and gallery complains that there's no external storage attached. I should add that after restarting, it took a moment for it so see that I indeed had a sim card installed.
I installed the latest JB kernel release, and the camera is still force closing, citing "Gallery has stopped." So while the camera and gallery don't work, I can still use "QuickPic" to look at gallery itesm like my pictures.. and uh.. porn. (Yes yo do!)
I'm having the same issues. Installed CM10.1 nightly today, with up todate gapps, install went smoothly as did setup. However, now that I'm trying to set up the phone (i.e. restoring apps from titanium) it shows that ext sd is not mounted. Same issues of gallery saying "No external storage available" and camera FCing due to gallery stopping.
I feel theres something I should be doing to my SD but not sure what.
Also, I'm running Jellywiz on another slot, as my daily driver before I can set thsi up, but am worried if i start messing with the SD, it might affect that ROM.
Has anyone found a way to resolve the ext SD issue?
I have had many phones and never had as much trouble than this phone is giving me. Every rom that does work when I flash them don't have any wifi or service. Even when I install gapps it is like it skips the setup and goes straight to the home screen.
I just came from a bionic and didn't think it would be much of a change to make this phone run like my bionic did. I have tried recreating rom slots with fresh installs and wipes on several roms, most of them cm10 based and even liquid smooth wont even install which is the rom I love the most. I have looked for several fixes but nothing seems to be working.
Is there something I am missing? Do you have to unlock the bootloader on this thing or something? Any help would be appreciated.
Rmbloungeact said:
I have had many phones and never had as much trouble than this phone is giving me. Every rom that does work when I flash them don't have any wifi or service. Even when I install gapps it is like it skips the setup and goes straight to the home screen.
I just came from a bionic and didn't think it would be much of a change to make this phone run like my bionic did. I have tried recreating rom slots with fresh installs and wipes on several roms, most of them cm10 based and even liquid smooth wont even install which is the rom I love the most. I have looked for several fixes but nothing seems to be working.
Is there something I am missing? Do you have to unlock the bootloader on this thing or something? Any help would be appreciated.
Click to expand...
Click to collapse
Wifi usually fixes itself after reboot, but for no-service I dont know.. Are you flashing correct version for your Razr (xt910/xt912), or flashing GSM patch if you have xt912 on GSM network?
Not to be redundant, but how ARE you flashing the ROMs? I've never had issues with connections (so long as I am using the applicable google apps, I have had to revert to a release or two earlier for proper operation in the past). I wouldn't recommend flashing ROMs via RSDlite, if that's the route you're taking. BMM and Safestrap (The latter can be achieved with Matt's Utility, it's what I use) are better options. Using a different partition on the internal storage, and retaining Stock rom. I never had any issues with Avatar (CM10.1 based). I'm about to try out AOKP. Good luck.
LuckiestNut419 said:
Not to be redundant, but how ARE you flashing the ROMs? I've never had issues with connections (so long as I am using the applicable google apps, I have had to revert to a release or two earlier for proper operation in the past). I wouldn't recommend flashing ROMs via RSDlite, if that's the route you're taking. BMM and Safestrap (The latter can be achieved with Matt's Utility, it's what I use) are better options. Using a different partition on the internal storage, and retaining Stock rom. I never had any issues with Avatar (CM10.1 based). I'm about to try out AOKP. Good luck.
Click to expand...
Click to collapse
Well I have been using safestrap since I used it on my Bionic and I am already familiar with it. The one that is bugging me the most is not being able to flash LiquidSmooth 2.9. (I am on SS 3.53 btw) Also I am using the XT912 and already researched the difference between 910 ROMS before flashing.
When I try to install it the error comes up saying:
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Warning: no file_contexts
set_perm: some changes found
E: error executing updater binary in zip '/sdcard-ext/Liquid-JB-v2.9-OFFICIAL-spyder.zip
Error flashing zip
I just wonder, if that thing is saying that the zip is meant to be an update for an existing version of LiquidSmooth. But on goo.im there is only 2.7, 2.8 and 2.9.
I've never seen that error (but I've been wanting to try LiquidSmooth, maybe I can duplicate the problem). I know with AOKP, I have to install on romslot2. For whatever reason. Have you tried any other slots besides 1?
EDIT
http://forum.xda-developers.com/showthread.php?t=2222535
The installation instruction for LiquidSmooth 2.9 say to install on RomSlot3, and only RomSlot3. I'll give it a whirl on 1 and see if the error is duplicated, but it shouldn't effect the install, regardless of the slot #.
http://goo.im/devs/liquidsmooth/spyder/Liquid-JB-v2.9-OFFICIAL-spyder.zip
This is the mirror I used to get the ROM.
Installed on Slot 1 without errors. Flashed gapps, wiped cache, restarted- wouldn't boot.
Wiped and deleted Slot 1
Installed on Slot 3 without errors. Flashed gapps, wiped cache, restarted- Success!
I never could duplicate the error you had, using the JB Liquid Smooth I got from goo.im
Also, for what it's worth, in the "Issues" category on the LS link from above, it said there was an autofix that would correct the wifi connectivity problem. Mine would never fully turn on wifi on first boot. Rebooted, worked perfectly. And the CM style setup went off without a hitch.
I also used goo.im to get mine. I tried all three versions of it but no success; all three got the same error code. I am wondering if the version of safestrap I am using is causing the error.
Rmbloungeact said:
I also used goo.im to get mine. I tried all three versions of it but no success; all three got the same error code. I am wondering if the version of safestrap I am using is causing the error.
Click to expand...
Click to collapse
Just threw out the version 3.5x of SS I was using. Going to try 3.11 and see how it goes. Man, I hope this works, I just came back from using an iPhone for the last two months after letting my brother have my Bionic because they couldn't flash the iPhone on his service provider. I guess if it doesn't work I will be happy having android back nonetheless. Just want something other than motoblur.
Rmbloungeact said:
Just threw out the version 3.5x of SS I was using. Going to try 3.11 and see how it goes. Man, I hope this works, I just came back from using an iPhone for the last two months after letting my brother have my Bionic because they couldn't flash the iPhone on his service provider. I guess if it doesn't work I will be happy having android back nonetheless. Just want something other than motoblur.
Click to expand...
Click to collapse
So I scrapped 3.5x for 3.11 and the install went perfectly normal. Accidentally installed the wrong gapps package and had a force close assault from hell. Redid it with the right gapps and everything is up and running now. I am so glad to have it running and ready to set up now. Thanks for your help guys!
Current setup is running eclipse on the stock slot. I created a new slot in the slot 1 location. I tried flashing a new rom in that location and it says the flashing process was successful. A thing to note though is that after trying to do a factory reset in slot 1 before flashing nothing happens like it normally would. The screen just goes black until I turn it back on.
The problem arises after rebooting to the new rom. Instead of booting into the new rom I just flashed It reboots into my current eclipse rom that I'm running in the stock slot except I also no longer have any data connection.
If I reboot back to safestrap and activate the stock slot then it reboots to eclipse with a data connection.
What the heck could the problem be?
The problem is that rom slots aren't working on Safestrap yet.
Surge1223 said:
The problem is that rom slots aren't working on Safestrap yet.
Click to expand...
Click to collapse
Ah ok. I thought I read that somewhere but couldn't find it again. That brings up another question.
Should restores be working properly? I tried restoring a backup but it failed. Then when I rebooted the phone it booted into the rom the backup was made from but the data wasn't there. So I resetup everything from scratch. Now I get force stop errors all the time. Did I do something wrong when trying to restore do you think?
First, hello, It's my first post on this forums, although I've been reading for quite a while, and I've learned A LOT, so thank you for creating such an amazing site. That being said, here's my problem:
I had CM11 installed on Stock Slot on Safestrap 3.75, JBX Kernel; I bought a Lapdock 100 and found out that the screen shows up with black bars on top and bottom, and the cellphone resolution stretched on the lapdock big screen. So I wnated to downgrade to Jellybean Stock, preferable a custom one, and I found theese two:
http://forum.xda-developers.com/showthread.php?t=2396234&page=17
http://forum.xda-developers.com/showthread.php?t=2260951
I tried both on Slot 1 and both worked fine, so I proceeded to wipe CM11 completely and installed ARTMOD; it said "successful" so I wiped cache and dalvik cache and hit reboot; SS asked me if I wanted to root my rom, I hit "yes" and then a black screen. Bricked phone. I got it running again with Retail Brasil trough RSD. I tried to install Improved Light and it didn't really install it, even though it said "successful" and everything. I have slot 2 with Improved light that survived two firmware flashes and the Stock Slot with Retail brasil, wich I find has some issues. Does anyone know WHY I can't install this ROMs? or how do I do it? or is it that I just can't install them on Slot Stock and i should find another ROM? wich one do you recomend with webtop or full HDMI compatibility?
Thanks in advance.
F.E.P.S. said:
First, hello, It's my first post on this forums, although I've been reading for quite a while, and I've learned A LOT, so thank you for creating such an amazing site. That being said, here's my problem:
I had CM11 installed on Stock Slot on Safestrap 3.75, JBX Kernel; I bought a Lapdock 100 and found out that the screen shows up with black bars on top and bottom, and the cellphone resolution stretched on the lapdock big screen. So I wnated to downgrade to Jellybean Stock, preferable a custom one, and I found theese two:
http://forum.xda-developers.com/showthread.php?t=2396234&page=17
http://forum.xda-developers.com/showthread.php?t=2260951
I tried both on Slot 1 and both worked fine, so I proceeded to wipe CM11 completely and installed ARTMOD; it said "successful" so I wiped cache and dalvik cache and hit reboot; SS asked me if I wanted to root my rom, I hit "yes" and then a black screen. Bricked phone. I got it running again with Retail Brasil trough RSD. I tried to install Improved Light and it didn't really install it, even though it said "successful" and everything. I have slot 2 with Improved light that survived two firmware flashes and the Stock Slot with Retail brasil, wich I find has some issues. Does anyone know WHY I can't install this ROMs? or how do I do it? or is it that I just can't install them on Slot Stock and i should find another ROM? wich one do you recomend with webtop or full HDMI compatibility?
Thanks in advance.
Click to expand...
Click to collapse
You need older version of Safestrap to be able to flash older roms like those.
Sent from my Razr XT910
welder73 said:
You need older version of Safestrap to be able to flash older roms like those.
Sent from my Razr XT910
Click to expand...
Click to collapse
Wich one would you recomend? Also, if after instaling I re-install 3.75, everything would still work?
Besides, I could install this ROMS in Slot 2 and Slot 1. So I can't put it on Slot Stock because SS 3.75 won't work for it?
Anyone?
I do apologize for creating a new post for an older phone. A few months ago I purchased my phone used. I rooted it and installed SS 3.75 with no problem. Tried a few roms and settled on a KitKat rom from cyanogenmod, specifically cm-11-20140104-SNAPSHOT-M2. It was the best for me for the camera working and for battery life. Using the cm updater I tried a couple of the newer releases, but the camera wouldn't work for any of them, but reflashing Slot 1 to 4.4.2, the camera would work without fail.
The problem started when I decided to flash it to the stock slot. It flashed with no issues, however the camera would always force close on start. I reactivated Slot 1 which has the same rom on it and the camera force closed there as well. Using the Droid Razr Utility, flashed the phone back to stock and rooted it again. After installing the rom back on slot 1, the camera still isn't working. It does, however, work on stock.
I'd wiped dalvik/cache several times since the camera quit working on the custom rom side, but other than that I'm at a loss. Even though the camera does work on the stock side, is it possible it could be a hardware problem?
Any help would be appreciated.
bethas321 said:
I do apologize for creating a new post for an older phone. A few months ago I purchased my phone used. I rooted it and installed SS 3.75 with no problem. Tried a few roms and settled on a KitKat rom from cyanogenmod, specifically cm-11-20140104-SNAPSHOT-M2. It was the best for me for the camera working and for battery life. Using the cm updater I tried a couple of the newer releases, but the camera wouldn't work for any of them, but reflashing Slot 1 to 4.4.2, the camera would work without fail.
The problem started when I decided to flash it to the stock slot. It flashed with no issues, however the camera would always force close on start. I reactivated Slot 1 which has the same rom on it and the camera force closed there as well. Using the Droid Razr Utility, flashed the phone back to stock and rooted it again. After installing the rom back on slot 1, the camera still isn't working. It does, however, work on stock.
I'd wiped dalvik/cache several times since the camera quit working on the custom rom side, but other than that I'm at a loss. Even though the camera does work on the stock side, is it possible it could be a hardware problem?
Any help would be appreciated.
Click to expand...
Click to collapse
camera should work on every Rom and every slot
which stock system version?
could try flashing stock with RSD Lite.
Sent from my KFFOWI using Tapatalk
bethas321 said:
I do apologize for creating a new post for an older phone. A few months ago I purchased my phone used. I rooted it and installed SS 3.75 with no problem. Tried a few roms and settled on a KitKat rom from cyanogenmod, specifically cm-11-20140104-SNAPSHOT-M2. It was the best for me for the camera working and for battery life. Using the cm updater I tried a couple of the newer releases, but the camera wouldn't work for any of them, but reflashing Slot 1 to 4.4.2, the camera would work without fail.
The problem started when I decided to flash it to the stock slot. It flashed with no issues, however the camera would always force close on start. I reactivated Slot 1 which has the same rom on it and the camera force closed there as well. Using the Droid Razr Utility, flashed the phone back to stock and rooted it again. After installing the rom back on slot 1, the camera still isn't working. It does, however, work on stock.
I'd wiped dalvik/cache several times since the camera quit working on the custom rom side, but other than that I'm at a loss. Even though the camera does work on the stock side, is it possible it could be a hardware problem?
Any help would be appreciated.
Click to expand...
Click to collapse
Have you tried some different camera app?
Sent from my Razr XT910
sd_shadow said:
camera should work on every Rom and every slot
which stock system version?
could try flashing stock with RSD Lite.
Sent from my KFFOWI using Tapatalk
Click to expand...
Click to collapse
The stock version is JB 4.1.2 98.72.16.XT912.Verizon.en.US.
The fact that the camera only worked with one custom rom and stock is why I'm wondering if it's a hardware issue.
Thanks for taking your time to help me with this.
welder73 said:
Have you tried some different camera app?
Sent from my Razr XT910
Click to expand...
Click to collapse
Hi welder73, yes I did try some other apps. I kept getting the message that the apps could not connect to the camera for all except Google Camera. That one would open take a couple of pictures and then fc everytime I used it. If I tried to open it again I would get the same message as the other camera apps. The only way to get Google Camera to work again would be to restart the phone. The camera cyanogenmod camera app would still fc everytime I opened.
bethas321 said:
Hi welder73, yes I did try some other apps. I kept getting the message that the apps could not connect to the camera for all except Google Camera. That one would open take a couple of pictures and then fc everytime I used it. If I tried to open it again I would get the same message as the other camera apps. The only way to get Google Camera to work again would be to restart the phone. The camera cyanogenmod camera app would still fc everytime I opened.
Click to expand...
Click to collapse
Hmmmm,strange but since your camera works with stock rom it can't be hardware issue.
Try Snap Camera,I use it for years
Sent from my Razr XT910
Thank you both sd_shadow and welder73 for trying to help. A couple of days ago I screwed something up and couldn't get stock to boot, so I reflashed the stock image again and set up cm 11 on slot 1 again. For whatever reason the camera is now working on slot 1. I don't know why it's working now, but it is. Again thank you both so much.