Hi, i am new to this forum and i have a problem with my galaxy s3 that i can´t solve. So I tried rooting my phone with Odin3 v3.07 yesterday and everything went just fine until it restarted. After i turn it on it immediately goes to a downloading screen that looks exactly like the one in download mode but without the text in the upper left corner. It is a standing android and the text under it says: Downloading... Do not turn of target !!
I have tried to take out sim and battery and to reboot and do a factory reset but nothing works! :/ Any help would be GREATLY appreciated!
I am absolutely no expert on rooting, this is my first time doing it so i am kind of a n00b
ps. I can still enter download and recovery mode!
Please help me
Thanks
I tried to root my Galaxy Note 10.1 2014 (SM-P600) and it failed in the middle of flashing. Now I cannot connect the device to Kies, nor can I even boot into recovery. I just get the Firmware upgrade encountered an issue screen. I can only get into download mode. Even so, I can't seem to flash anything. It keeps failing. I just want to get this thing working again. Help, please?
EDIT: Odin finally decided to work, my device works again. *sigh of relief* Can someone please delete this thread?
Hi! I need your help please! I was trying to downgrade my phone software, using odin, by installing a different kernel,
the problem is that it gave me an error, and now my phone doesnt work at all, it only turns on, and a big black screen,
so can someone help me in getting it back to normal, everytime that I tried now with odin to install a different kernel
to make it respond doesnt do anything, it starts the process, but an error 7 come up..:crying:
Please help me, dont know what else to do and I need my cellphone back.
Thanks in advance for your replieS!
Hi I really need some help unbricking my phone.
I have a doogee Mini F1 Turbo which was rooted. Today I did an OTA update (bad idea).
During the update the word ERROR appeared on the screen. When the phone rebooted it was stuck on the white boot logo screen.
I've downloaded the SP Flash tool and rom from the doogee website
When I try and re-flash I get the Message "Error initializing scatter file failed. Please check the name of scatter file you load is legal"
Hopefully some body can point me in the right direction and help me get my phone working again.
Thanks for your time,
Gavin
Hi Gavin,
I'd you get a solution to this? I'm facing the same issue.
Denclan
Soultion
Hi Denclan,
Sorry about the delay inb replying.
Yes I found a solution to my reflashing problem. What I had to do was move the contents of the ROM Download into to same folder as the Flashing program. This then worked.
I would be carefull with the R07 update.
After reflashing my phone I updated it before rooting. Then rooted it. Everything seemed fine but the battery drain was shocking so I've flashed it back to R05 and that works a treat.
Hope this helps you out.
Gavin
denclan said:
Hi Gavin,
I'd you get a solution to this? I'm facing the same issue.
Denclan
Click to expand...
Click to collapse
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Do you find the solution yet? Cause I face the same problem too..
Tzul please help.. :crying:
me too, please help
similar issue, cant power on, keep on vibrate loop interval, no display, not detected by pc
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
asdrubalsantander said:
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
Click to expand...
Click to collapse
THis might WOrk i ve havent tried yet ,tho i wanna flash it now
https://forum.xda-developers.com/android/development/tb3-710i-tb3-710f-rom-stock-rom-lenovo-t3437810
same problem faced,can any developer please help us