Here's the new Stock OTA 2.04.605.2 710RD rooted ROM.
This does not have new radio or firmware.
Flash from recovery to install.
Devs can use also, just credit.
If wifi don't work, or won't boot, flash boot.img.
http://www.androidfilehost.com/?fid=9390288116658474610
Sent from my HTC6435LVW using xda app-developers app
Anyone tried this ?
I flash straight
Re: [ROM] Stock OTA 2.04.605.2 710RD rooted ROM
Downloading now, ill report back in an hour or so and fill you guys in on how it went.
Sent from my HTC6435LVW using xda premium
Thanks MicroMod get some sleep now my friend its been a long day for you and you deserve it.
You are the man. I finally gave up about 1 am. Daughter having wisdom teeth out today so i had to get some sleep. I'll be playing with this later. :victory:
Re: [ROM] Stock OTA 2.04.605.2 710RD rooted ROM
If we flash this straight from custom recovery will we still get new radio/boot loader?
Sent from my Galaxy Nexus using Tapatalk 2
Worked like a charm. I used Flash IMage GUI to flash boot image then wiped everything in recovery and flashed no problems. Where do i find new radio (sorry for stupid question)?
Re: [ROM] Stock OTA 2.04.605.2 710RD rooted ROM
Tybaltus Prime said:
If we flash this straight from custom recovery will we still get new radio/boot loader?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
No. That must be done in OTA install. Or a manual install of it.
Sent from my HTC Rezound...
Flyhalf205 said:
No. That must be done in OTA install. Or a manual install of it.
Sent from my HTC Rezound...
Click to expand...
Click to collapse
How do you manually install it? Will installing the new radio only conflict with the older firmware?
Re: [ROM] Stock OTA 2.04.605.2 710RD rooted ROM
Working good so far, I've noticed the end call beep isn't devistatingly loud anymore.
Sent from my HTC6435LVW using xda premium
Re: [ROM] Stock OTA 2.04.605.2 710RD rooted ROM
Sjflowerhorn said:
Working good so far, I've noticed the end call beep isn't devistatingly loud anymore.
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
What recovery did you flash it in ?
Sent from my HTC6435LVW using xda app-developers app
orangechoochoo said:
How do you manually install it? Will installing the new radio only conflict with the older firmware?
Click to expand...
Click to collapse
boot into bootloader and click on fastboot (it might even boot into fastboot not sure) If you see Fastboot USB you are good
Code:
fastboot flash radio radio.img
It shouldnt be affected by the older firmware. However because we do not have S-OFF it probably wont write the radio.img
Thanks Micro for the ROM
Damn it !!! I forgot to pull the system before I flashed your rooted ROM. Looks like I'm using your pull as a base cause I'm not doing it over LOL..
I see we have the flip clock now.. I know some people will be complaining about that..
zone23 said:
Damn it !!! I forgot to pull the system before I flashed your rooted ROM. Looks like I'm using your pull as a base cause I'm not doing it over LOL..
I see we have the flip clock now.. I know some people will be complaining about that..
Click to expand...
Click to collapse
is landscape present, im just curious because I saw some stuff that had to do with landscape
.torrented said:
is landscape present, im just curious because I saw some stuff that had to do with landscape
Click to expand...
Click to collapse
Nope no landscape would have been nice. Surprising how inconsistent HTC is with the software,
.torrented said:
boot into bootloader and click on fastboot (it might even boot into fastboot not sure) If you see Fastboot USB you are good
Code:
fastboot flash radio radio.img
It shouldnt be affected by the older firmware. However because we do not have S-OFF it probably wont write the radio.img
Thanks Micro for the ROM
Click to expand...
Click to collapse
So fastbooting the radio.img wont work.
orangechoochoo said:
So fastbooting the radio.img wont work.
Click to expand...
Click to collapse
that is weird... I am not knowledgeable about this type stuff but I wonder why we can fastboot flash recoveries and kernels, but not the radio..
so then is the only way to get the new radio to re-lock>> run the RUU>> unlock again>> flash custom recovery>> then preferred ROM?
My understanding is s-off prevents flashing radios, but we can still flash recoveries, kernels, and roms.
I just wanted to be clear about the ability to flash the radio.
orangechoochoo said:
My understanding is s-off prevents flashing radios, but we can still flash recoveries, kernels, and roms.
I just wanted to be clear about the ability to flash the radio.
Click to expand...
Click to collapse
maybe i misunderstood your post... were you stating a fact that you tried and flashing the radio doesn't work or asking?
Related
Disclaimer: Flash this ROM at your own risk. I am not responsible for what you do on your device. I left this stock to provide a base for anybody that wants to use it. Mod this rom how you want. Just please remember to give credit where credit is due.
This is a pure stock rom. I removed nothing. I only added system level tweaks. I.E. busybox, root, init.d support, and so forth. No apps were added or removed. Just something for people that like a stock looking rom with little to no changes.
Instructions:
Copy to SD.
Flash in recovery.
Download
Thanks
-------------------
First and foremost this wouldn't have been possible if it wasn't for erishasnobattery and adrynalyne. These 2 guys helped me so much with all my problems.
dsb9938 --- for bouncing issues back and forth and talking through issues
Team BAMF --- for all the work they have done and all assistance
Everybody from #Thunderbolt --- for answering my questions when the other guys were away
Fixed my mistake
jmztaylor said:
Fixed my mistake
Click to expand...
Click to collapse
Nice! good to see another View ROM in the forum. Let me know if you have any other plans/issues that you want help with.
jmztaylor said:
Disclaimer: Flash this ROM at your own risk. I am not responsible for what you do on your device. I left this stock to provide a base for anybody that wants to use it. Mod this rom how you want. Just please remember to give credit where credit is due.
Click to expand...
Click to collapse
Congrats on the ROM and thx for sharing
So with this we don't need to use the multi tool if we are running GB?
Does this give S-OFF with HC?
DssTrainer said:
So with this we don't need to use the multi tool if we are running GB?
Does this give S-OFF with HC?
Click to expand...
Click to collapse
No. You still have to be rooted and either HTC unlock or s-off.
Sent from my ADR6425LVW using XDA Premium App
Updated with actual RUU and not a system dump.
It's not doing the bootloader thing for me. Did your latest update remove the necessity of flashing the boot.img in fastboot? Also, do I need to manually create the init.c directory? because it's not present after the flash.
Bradart said:
It's not doing the bootloader thing for me. Did your latest update remove the necessity of flashing the boot.img in fastboot? Also, do I need to manually create the init.c directory? because it's not present after the flash.
Click to expand...
Click to collapse
No it is the same kernel and everything just used the official source. I packaged it this way to prepare for the HTC dumlock recovery hack. The only reason you would need to flash the kernel through hboot is if you are HTC unlocked. I am working on the recovery and integrating the dumlock so HTC unlock users can flash kernels in recovery
Sent from my PG41200 using XDA Premium App
I just download the rom, but a problem, i flash it but is not booting in hboot, and when i reboot just get stuck in HTC logo, i have gb rooted and revolutionary s/off, any suggestion
janocool said:
I just download the rom, but a problem, i flash it but is not booting in hboot, and when i reboot just get stuck in HTC logo, i have gb rooted and revolutionary s/off, any suggestion
Click to expand...
Click to collapse
On this device you are unable to go back and forth like you can on other devices. You need to upgrade hboot for one. There is an s-off upgrade thread by globatron here somewhere that will tell you how to do the upgrade while keeping s-off. Once you do that you can flash this without an issue
Sent from my PG41200 using XDA Premium App
new Kernel
Are you going to update this with your new kernel?
copperdawgnc said:
Are you going to update this with your new kernel?
Click to expand...
Click to collapse
No, as I wanted this to be a pure stock rooted rom. Nothing edited, removed, or replaced.
jmztaylor said:
On this device you are unable to go back and forth like you can on other devices. You need to upgrade hboot for one. There is an s-off upgrade thread by globatron here somewhere that will tell you how to do the upgrade while keeping s-off. Once you do that you can flash this without an issue
Sent from my PG41200 using XDA Premium App
Click to expand...
Click to collapse
Kevinrocksman has a Multi-Tool to upgrade/downgrade Hboots for HC or GB...
http://forum.xda-developers.com/showthread.php?p=20825037
Sent from my PG41200 using Tapatalk
New Kernel
jmztaylor said:
No, as I wanted this to be a pure stock rooted rom. Nothing edited, removed, or replaced.
Click to expand...
Click to collapse
Ok Thanks, I will have to learn how to flash a kernel, have not done it before.
copperdawgnc said:
Ok Thanks, I will have to learn how to flash a kernel, have not done it before.
Click to expand...
Click to collapse
It's exactly the same as flashing a Rom. Unless you are HTC unlocked
Sent from my HTC_A510c using xda premium
ROM showing up as temporarily unavailable on Mediafire. Will you re-up to a new location?
Updated OP with correct link
I get a bootloop on my htc view.. Can i flash this rom through fastboot mode??
Fastboot update <filename>
Or anyone can help me
arief347 said:
I get a bootloop on my htc view.. Can i flash this rom through fastboot mode??
Fastboot update <filename>
Or anyone can help me
Click to expand...
Click to collapse
put the rom in the same folder as fastboot.exe and type the following
fastboot oem rebootRUU
then
fastboot flash zip rom.zip
that should work
S-OFF DEVICES ONLY
I WILL ONLY SAY THIS ONCE, IF YOU HAVE DATA ISSUES FROM SWITCHING FIRMWARES YOU MUST FLASH THE STOCK RECOVERY AND PERFORM A FACTORY RESET IN HBOOT
DO NOT S-ON THE ENG OR JB HBOOT OR IT WILL BRICK YOUR DEVICE
ANYTHING DONE AT THIS POINT IS YOUR RESPONSIBILITY NOT MINE
So what is this?
Well ill answer that, these are Hboot/Radio/Firmware Combos
What do you do with these?
The purpose of these is avoid performing a full RUU if you would like to upgrade or downgrade firmwares/radios
So why do these include Hboot/radio/firmware files, cant we just flash the radios?
NO, mix and matching all of these has be known to cause data issues. Its best to flash the whole set to prevent data issues
How do you flash these?
Assuming you checked the MD5 sum, just rename these to PH98IMG.zip and place on the root of your external sdcard
New firmware patch huh?
This is simply for those upgrading to ICS firmware on a GB rom Or and ICS rom that had the gingerbread patch flashed over it
Whats the difference between the stock Hboots and the JB/ENG Hboots?
Simply, These Hboots have fastboot commands enabled WITHOUT unlocking the bootloader
I suggest if you use fastboot alot to use these hboots
Thanks to CharliesTheMan i now have a spot on AndroidFileHost
Heres how to tell which file you need
Each file will be named accordingly
[Firmware][Hboot version][JB or Stock hboot][Date of leak if applicable]
So an example would be [GB][2.11][JB]PH98IMG.zip
i suggest you check the MD5 and if you dont know what an MD5 is then you need to research what it is before flashing any of these
Here's the Link: http://www.androidfilehost.com/?a=show&w=files&flid=3054
Thanks to the JuopunutBear Team for getting us S-off, Jcase for the leaked Hboot
Very very nice. Thank you. Flash this and a GB rom, and it's on old firmware.
superchilpil said:
Since i didnt want to run the gingerbread ruu and mess with nandroiding back to get the eng hboot i made this
This is the eng hboot bundled up with the old firmware, you ust use the old firmware patch to run ics roms after flashing this
just place it on the root of your sd card, rename, and reboot to hboot
It will reboot once during the flash this is normal
DISCLAIMER: IT IS NOT MY FAULT IF YOU BRICK YOUR DEVICE DOING THIS, YOU MUST BE S-OFF AND AS ALWAYS CHECK THE MD5 SUM
DOWNLOAD:http://www.mediafire.com/?4i8sfbj74a9xqzb
MD5:10005eafcdc1e242d9d8ed91b7d68210
OLD FIRMWARE PATCH: http://www.mediafire.com/?8v3a2al9129gp9h
Credits go to Jcase for the hboot, and to whom ever made the old firmware patch
Click to expand...
Click to collapse
This is what I've been running by default after s-off. Has been rock solid. Don't think I'll change for now as many are having issues and/or experimenting. I'll just wait and see what people come up with. Great job in doing this...
Sent from my ADR6425LVW using Tapatalk
How's battery life ? Will flash later.
Sent from my ADR6425LVW using xda premium
jclendineng said:
How's battery life ? Will flash later.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
So far I'd have to say it's better, and it nay just be me but everything seems smother overall
Sent from my ADR6425LVW using Tapatalk 2
Thanks man! Set this up with Newts XxX rom and having no problems! I am pretty new to HTC phones coming from a DroidX. How do I know if the ENG installed correctly? I know the old firmware is loaded up right.
ih8mydroid said:
Thanks man! Set this up with Newts XxX rom and having no problems! I am pretty new to HTC phones coming from a DroidX. How do I know if the ENG installed correctly? I know the old firmware is loaded up right.
Click to expand...
Click to collapse
The hboot will say ENG S-OFF near the top.
con247 said:
The hboot will say ENG S-OFF near the top.
Click to expand...
Click to collapse
Con with the answers. Sweet! This works like a charm!
This works perfectly and i do think i notice a slight smoother response on most things then before plus the radios like me again. Awesome job
on a side note : con247 every time i see you post something i look at your speedtest sig and get so jealous and angry at the same time since i cant get anything over 8 mbit upload (and that's business class internet) where im at.... kudos to you and fml lol
jclendineng said:
How's battery life ? Will flash later.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Seems better....and I've been using the phone more lately on 4G....but who knows.
Sent from my ADR6425LVW using Tapatalk
dajmanjt said:
This works perfectly and i do think i notice a slight smoother response on most things then before plus the radios like me again. Awesome job
on a side note : con247 every time i see you post something i look at your speedtest sig and get so jealous and angry at the same time since i cant get anything over 8 mbit upload (and that's business class internet) where im at.... kudos to you and fml lol
Click to expand...
Click to collapse
Kudos to his University's internet connection? Show me what you have at home....
So if we are on ICS, we flash this to get back to GB?
Sent from my ADR6425LVW using XDA
i'm assuming since it's locked but with s-off we need to unlock the bootloader with htc again right? also the patch works but cache still doesnt mount right
retepdgp said:
So if we are on ICS, we flash this to get back to GB?
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
This will only downgrade your firmware. Your rom should be left intact. However you will need to flash the GB firmware patch over your rom immediately after doing this or you will have problems. If you want to downgrade android itself, flash a gb rom after doing this or just flash the whole gb ruu
retepdgp said:
So if we are on ICS, we flash this to get back to GB?
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
this is the hboot for gb or ics depending on which rom you are using or about to install. the firmware patch is to fix most mounts if using ics roms
Thanks guys. So IF I also run the Firmware patch (For ICS) would it still work for a GB ROM?
Sent from my ADR6425LVW using XDA
dyetheskin said:
this is the hboot for gb or ics depending on which rom you are using or about to install. the firmware patch is to fix most mounts if using ics roms
Click to expand...
Click to collapse
The firmware patch also fixes an audio lib that causes constant reboots.
I am on stock rooted 2.01 with all original firmware. If I use both of the files is the OP along with one of the ICS roms will everything work correctly? If not what would I need to do? I would prefer to stay on the GB firmware as I have been getting great service, 3g and 4G speeds.
dyetheskin said:
i'm assuming since it's locked but with s-off we need to unlock the bootloader with htc again right? also the patch works but cache still doesnt mount right
Click to expand...
Click to collapse
Seriously.... People when you S-OFF YOU DO NOT HAVE TO UNLOCK YOU BOOTLOADER!!!!! S-OFF = UNLOCKED IS THIS EVERYONE'S FIRST PHONE?!?!?!
Sent from my ADR6425LVW using XDA App
Clay333 said:
I am on stock rooted 2.01 with all original firmware. If I use both of the files is the OP along with one of the ICS roms will everything work correctly? If not what would I need to do? I would prefer to stay on the GB firmware as I have been getting great service, 3g and 4G speeds.
Click to expand...
Click to collapse
If your stock then you don't need to flash the hboot file unless you just want the eng hboot, you could just use cons for that
This is meant to downgrade those who upgraded their firmware to the new ics leak
But if you just want to run an ics Rom with the old firmware then just flash the patch in recovery and you should be good
Sent from my ADR6425LVW using Tapatalk 2
RUU is up on Android Police's site! Check it out!
http://www.androidpolice.com/2012/08/02/exclusive-download-htc-rezound-ice-cream-sandwich-ruu-for-final-ota-3-14-605-12/
08/12 was month not day
First
Sent from my ADR6425LVW using Tapatalk 2
izzaeroth said:
[ruu] 3.14.605.12 [08/12]
RUU is up on Android Police's site! Check it out!
http://www.androidpolice.com/2012/08/02/exclusive-download-htc-rezound-ice-cream-sandwich-ruu-for-final-ota-3-14-605-12/
Click to expand...
Click to collapse
From the future...
since you posted the OTA almost 3 weeks before the official one, can we expect the kernel source from you soon?
live2die said:
since you posted the OTA almost 3 weeks before the official one, can we expect the kernel source from you soon?
Click to expand...
Click to collapse
I am hoping, but you never know...
Does this have the same hboot as .10?
Any kernel changes?
Sent from my ADR6425LVW using xda premium
"This will not work if you used the HTC Bootloader unlock tool. Your device must be fully stock with a locked bootloader or you must have S-Off "
Is there anyone who as actually tried this official update w/just having S-Off? I'm not quite daring enough to hop out there and doing it without having someone have mentioned or tried it first. My phone is my business phone, so it will make things difficult having it down for any period of time.
shrike1978 said:
Does this have the same hboot as .10?
Click to expand...
Click to collapse
yes
I was going to ask is this is same version of the leaked we had a couple weeks ago? Or is it an updated version?
jmackin1016 said:
"This will not work if you used the HTC Bootloader unlock tool. Your device must be fully stock with a locked bootloader or you must have S-Off "
Is there anyone who as actually tried this official update w/just having S-Off? I'm not quite daring enough to hop out there and doing it without having someone have mentioned or tried it first. My phone is my business phone, so it will make things difficult having it down for any period of time.
Click to expand...
Click to collapse
What if you are both HTC unlocked and s-off ? Do you have to relock ?
Sent from my ADR6425LVW using xda premium
cbrown245 said:
What if you are both HTC unlocked and s-off ? Do you have to relock ?
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
not if ur s-off
izzaeroth said:
not if ur s-off
Click to expand...
Click to collapse
you will still retain unlocked, it will just chg ur hboot to stock and recovery, but just use firmware patch if need be and flash custom recovery
Has anyone flashed this ? How is battery life ? Any improvements with stock kernel?
Sent from my ADR6425LVW using xda premium
cbrown245 said:
Has anyone flashed this ? How is battery life ? Any improvements with stock kernel?
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
ive been running the rom'ed ver and battery life seems about the same. not sure about improvements to kernel. .10 and .12 have same
Any new radios with this RUU??
cowman4000 said:
Any new radios with this RUU??
Click to expand...
Click to collapse
sadly no there isnt
I'm wondering if with s-off and unlocked, but stock 2.11 GB if its possible to get the OTA and what happens if I do take it. I plan to run the RUU and unlock and root that again.
bond32 said:
I'm wondering if with s-off and unlocked, but stock 2.11 GB if its possible to get the OTA and what happens if I do take it. I plan to run the RUU and unlock and root that again.
Click to expand...
Click to collapse
if u run this ruu it will still be unlocked but it will update your firmware to ics and hboot, but just install a custom recovery and root and youre set. it will wipe your data so be sure to use TB
izzaeroth said:
if u run this ruu it will still be unlocked but it will update your firmware to ics and hboot, but just install a custom recovery and root and youre set. it will wipe your data so be sure to use TB
Click to expand...
Click to collapse
Is there any advantage to being on ICS hboot/firmware? I have been flashing roms but I went s-off last night to make the process easier. I suppose I don't mind flashing the GB patch. Thanks for the quick reply
UNOFFICIAL CM10.1 [JB-4.2.2] for HTC Rezound
Support thread for the community
Note: This is the official support thread for my ROM UNOFFICIAL CM10.1 [JB-4.2.2] for HTC Rezound. If you are having trouble and need a little help, this is the place to ask questions. DO NOT post your question in my ROM's thread in the development section. Post them here.
Please consider checking the Frequently Asked Questions section for my ROM first to see if there is an answer for your question. If there is not, then by all means feel free to post your question!
Click to expand...
Click to collapse
Thanks in advance to the users of my ROM who may also help out answering questions that get posted in this thread
Original question
K I'm thinking of updating radios and hboot now my radios are 1xxxxxxx and 1xxxxx my hboot though is 2.27 which if I'm not mistaken is the newest one? I know I have asked about this before but if I update will it brick if I am already on the newest hboot or will it not matter? I just want to make sure I know what I'm doing.
I understand that's how I do it but is it safe to if I'm already on 2.27 hboot. I'm sorry stang I'm just confused and is just something I remember being a problem from the incredible days.
Reply
I could be wrong but I believe the procedure involves downloading the RUU, opening the zip with an archive manager and just remove everything out of the RUU you do not want to update and then just close the zip, rename it and flash it in hboot. Don't try that until we can get a better answer though. Lets move this question over to the support thread.
Sent from my ADR6425LVW using xda app-developers app
zkrp5108 said:
K I'm thinking of updating radios and hboot now my radios are 1xxxxxxx and 1xxxxx my hboot though is 2.27 which if I'm not mistaken is the newest one? I know I have asked about this before but if I update will it brick if I am already on the newest hboot or will it not matter? I just want to make sure I know what I'm doing
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
darkghost568 said:
Yep. That's the newest HBOOT.
Click to expand...
Click to collapse
zkrp5108 said:
So how do I go about updating the baseband versions
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
wildstang83 said:
Q6
Click to expand...
Click to collapse
zkrp5108 said:
I understand that's how I do it but is it safe to if I'm already on 2.27 hboot. I'm sorry stang I'm just confused and is just something I remember being a problem from the incredible days.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Like I was saying, I could be wrong but I believe the procedure involves downloading the RUU, opening the zip with an archive manager and just remove everything out of the RUU you do not want to update and then just close the zip, rename it and flash it in hboot.
So if you download the RUU and open it up with an archive manger like 7Zip you can see a bunch of files:
adsp.img
android-info.txt
boot_signed.img
dzdata_16g.hdr
dzdata_16g.img
hboot_8x60-lte_2.27.0000_120803_MR2_signedbyaa.nb0
mdm9k.img
mdmrcdata_3.01_002.img
pg2fs_spcustom.img
radio.img
ramdisk.img
rcdata_1.16.002.img
recovery_signed.img
rpm.img
sbl1.img
sbl2.img
sbl3.img
splash1.nb0
system.img
tp_atmel224e_1101.img
tz.img
I think your supposed to remove everything but android-info.txt and radio.img and just close the zip, rename it to PH98IMG.zip and flash in HBOOT. I'd rather you not do this though until someone gives us a better answer as I rarely mess with radios and such. Things are quite a bit different than what they were on the Incredible.
Right on
Sent from my ADR6425LVW using xda app-developers app
I have installed a few different JB roms on my rezound and recently after installing this rom my notification drawer is not responding correctly. wWhen pulling down the drawer it stops at the date and the button for the quick settings and it just stays there and the hardware buttons are then unresponsive. Is this a known issue? I searched but didn't find any mention. It does this on any JB rom/kernel I have tried.
Thanks in advance for the help!
rghart09 said:
I have installed a few different JB roms on my rezound and recently after installing this rom my notification drawer is not responding correctly. wWhen pulling down the drawer it stops at the date and the button for the quick settings and it just stays there and the hardware buttons are then unresponsive. Is this a known issue? I searched but didn't find any mention. It does this on any JB rom/kernel I have tried.
Thanks in advance for the help!
Click to expand...
Click to collapse
Hmm, yea that is definitely not normal and isn't a known bug, with this Rom at least. I'm assuming your Rezound is on the very latest firmware and you have followed the install instructions perfectly right? Are you using other kernels with this rom and thats what causing the problem, or does it do it on the stock kernel as well?
EDIT: Also does the bug continue if a different launcher is used like Apex, Nova, Launcher Pro or ADW EX?
I am s-off I am going to do an ruu and see if it is fixed. I have tried multiple Roms including yours ,shrike's, and Neo's, each with the kernel the ROM comes with. I had shrike's pacman for a while and it never had this issue.
Hboot-2.27.00 I'm sorry but where do I find the firmware info? Or does the hboot suffice?
Settings / About phone / Baseband version. Also I asked about the launcher. Does using a different one fix the problem?
Sent from my SCH-I605 using Tapatalk 2
The baseband version is 2.22.10.0801r, 2.22.10.0803r
I installed apex and it acts the same.
Sent from my Nexus 7 using Tapatalk 2
The only other reports I can find related to your issue were caused by defected screens on certain devices. The cause is slight screen lift at the top. The effect would be the Status bar could not be dropped down, could only sometimes be dropped down, or could be dropped down most of the time with a minor issue getting the shade to pull down ever so often. I'd suggest RUUing back to stock and if the issue is still there, send the phone in for repair or replacement.
Stang did you ever get a response or more info on me updating the baseband
Sent from my ADR6425LVW using xda app-developers app
I'm upgrading my firmware and radios as I'm still on a 1.x radio for some reason, and I'm downloading the RUU, checking the MD5 both on my SDcard and it matches, rename it to " PH98IMG.zip", I boot into Hboot and it checks the file for 30-45 seconds, then never asks me to upgrade? Any ideas?
Currently on Hboot 2.21.000 and radio 1.22.10.0310r/1.22.10.0300r. I am S-on but unlocked. Waiting to do this RUU, then S-off, then flash this rom.
hollisjamison said:
I'm upgrading my firmware and radios as I'm still on a 1.x radio for some reason, and I'm downloading the RUU, checking the MD5 both on my SDcard and it matches, rename it to " PH98IMG.zip", I boot into Hboot and it checks the file for 30-45 seconds, then never asks me to upgrade? Any ideas?
Currently on Hboot 2.21.000 and radio 1.22.10.0310r/1.22.10.0300r. I am S-on but unlocked. Waiting to do this RUU, then S-off, then flash this rom.
Click to expand...
Click to collapse
Same thing is happening to me hollis, and I think it's because you're S-on. I saw a blurb somewhere that said to do the RUU you have to either be on the stock ROM or be S-off already.
I'm still S-on too. I looked into the JuopunutBear S-off procedure and it said a prerequisite was also that I be on the stock ROM 1st. So, do I have to somehow get my Rezound back to stock and off of the ViperRez ROM I'm on now, then do JuopunutBear, then do the RUU, then do a new recovery, then do CM10?
KnightDavid said:
Same thing is happening to me hollis, and I think it's because you're S-on. I saw a blurb somewhere that said to do the RUU you have to either be on the stock ROM or be S-off already.
I'm still S-on too. I looked into the JuopunutBear S-off procedure and it said a prerequisite was also that I be on the stock ROM 1st. So, do I have to somehow get my Rezound back to stock and off of the ViperRez ROM I'm on now, then do JuopunutBear, then do the RUU, then do a new recovery, then do CM10?
Click to expand...
Click to collapse
Figured it out, you have to relock your bootloader to install RUUs. Just installed the RUU... S-OFF next, then install CM 10.1
zkrp5108 said:
Stang did you ever get a response or more info on me updating the baseband
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Not yet. Hoping someone will know...
Sent from my SCH-I605 using Tapatalk 2
What are the benefits of the newer radios?
Battery life better signal strength global calling
Sent from my ADR6425LVW using xda app-developers app
Using the bootloader I ran the RUU. It fixed the problem with the notification drawer. I tried your ROM and Neo's and there doesn't seem to be any problems.
Thank you very much for having this thread!
Sent from my ADR6425LVW using Tapatalk 2
rghart09 said:
Using the bootloader I ran the RUU. It fixed the problem with the notification drawer. I tried your ROM and Neo's and there doesn't seem to be any problems.
Thank you very much for having this thread!
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Ah that is good to see. Very happy it worked for you
okay, i can't seem to get the RUU to actually update and install for some reason, i dloaded it, checked the MD5 and renamed it. all it will do is recognize it, check it. and then stops there anyone able to point me to an instruction set (already tried and Dloaded Wildstang's)
I have a HTC One Max it is s-off routed and unlocked
I'm using the viper 1.01 rom verizon 4.3
I would like to use the viper 2.0 rom
kitkat 4.42. Will it work properly as I don,t
have the kitkat 4.42 ota update? What do I have to do
to get the ota update and use the viper 2.0 rom?
Or is it inbedded in the viper 2.0 rom.
I did try flashing it however could not get wi-fi to work.
I did try reading for this in viper forms -but ???
Dayliter said:
I have a HTC One Max it is s-off routed and unlocked
I'm using the viper 1.01 rom verizon 4.3
I would like to use the viper 2.0 rom
kitkat 4.42. Will it work properly as I don,t
have the kitkat 4.42 ota update? What do I have to do
to get the ota update and use the viper 2.0 rom?
Or is it inbedded in the viper 2.0 rom.
I did try flashing it however could not get wi-fi to work.
I did try reading for this in viper forms -but ???
Click to expand...
Click to collapse
I am not exactly sure if you need to take an OTA to be able to flash ViperMax 2.0.0. However, OTA will certainly upgrade your phone's bootloader which is 2.49.0.000
You need to unroot your phone to be able to take OTA.
To unroot:
* Restore stock backup
* flash stock recovery
* Relock your bootloader.
* After all of this, boot into stock recovery and Factory Rest and finally boot into your phone.
Now you should be able to receive OTA.
Let me know if you would need to know something else.
Sent from my HTC One max using XDA Premium 4 mobile app
viper 2.0 rom? if i could find out if ota update inbedded in the viper 2.0 rom. or
farazhassankhan said:
I am not exactly sure if you need to take an OTA to be able to flash ViperMax 2.0.0. However, OTA will certainly upgrade your phone's bootloader which is 2.49.0.000
You need to unroot your phone to be able to take OTA.
To unroot:
* Restore stock backup
* flash stock recovery
* Relock your bootloader.
* After all of this, boot into stock recovery and Factory Rest and finally boot into your phone.
Now you should be able to receive OTA.
Let me know if you would need to know something else.
Sent from my HTC One max using XDA Premium 4 mobile app
Click to expand...
Click to collapse
viper 2.0 rom?
if i could find out if ota update is inbedded in the viper 2.0 rom. or do i need it to use the kk 4.42 custom ROMS-cause rooting ,unlocking was hard for me the 1st goround
Dayliter said:
viper 2.0 rom?
if i could find out if ota update is inbedded in the viper 2.0 rom. or do i need it to use the kk 4.42 custom ROMS-cause rooting ,unlocking was hard for me the 1st goround
Click to expand...
Click to collapse
I didn't understand what you said. Come again please. ?
Sent from my HTC One max using XDA Premium 4 mobile app
Dayliter said:
viper 2.0 rom?
if i could find out if ota update is inbedded in the viper 2.0 rom. or do i need it to use the kk 4.42 custom ROMS-cause rooting ,unlocking was hard for me the 1st goround
Click to expand...
Click to collapse
The 4.4.2 firmware isn't included in Viper 2.0 rom. It can be installed as stated in farazhassankhan post or fastboot installation.
back to stock
jerrycycle said:
The 4.4.2 firmware isn't included in Viper 2.0 rom. It can be installed as stated in farazhassankhan post or fastboot installation.
Click to expand...
Click to collapse
ok ill give the directions farazhassankhan a try this week end --PS- THANKS
Dayliter said:
ok ill give the directions farazhassankhan a try this week end --PS- THANKS
Click to expand...
Click to collapse
if your s-off you don't want to change you bootloader, just install 2.0 and wait(if someone makes one)for a flashable firmware for s-off users.with stock recovery and hboot removed,
from version 4.3 to4.4.2
Aldo101t said:
if your s-off you don't want to change you bootloader, just install 2.0 and wait(if someone makes one)for a flashable firmware for s-off users.with stock recovery and hboot removed,
Click to expand...
Click to collapse
so you are saying I can flash 4.4.2 roms even tho I am on 4.3 right now (viper 1.0.1) I had tried viper 2. but could not get wi fi to work ------
Do you know if their is some kind of fix for that Wi-Fi ? or mabe it was just me or a bad download I had flashed.
I thought I had to take the OTA update to use 4.4.2 roms --Thanks for yall"s time and efort
Dayliter said:
so you are saying I can flash 4.4.2 roms even tho I am on 4.3 right now (viper 1.0.1) I had tried viper 2. but could not get wi fi to work ------
Do you know if their is some kind of fix for that Wi-Fi ? or mabe it was just me or a bad download I had flashed.
I thought I had to take the OTA update to use 4.4.2 roms --Thanks for yall"s time and efort
Click to expand...
Click to collapse
yeah you can flash it, are you on twrp 2.6.3.0 or higher no problem i would flash viperone 2.. clean flash that is.
wipe:
dalvic
cache
data
system
not the internal(be careful here, you don't check it by mistake
boot to recovery, tap wipe>advanced wipe, then select the above
if wifi still doesn't work you may need to flash the radio from the update. i don't have this phone so, maybe someone here will make a flashable for just the radio are you s-off??
yes i am s-off and got TWRP 2.7(VERIZON HTC one max--- guess i ant in on big hurry i dont even no what atvanatages the ota have over what i already got
Dayliter said:
yes i am s-off and got TWRP 2.7(VERIZON HTC one max--- guess i ant in on big hurry i dont even no what atvanatages the ota have over what i already got
Click to expand...
Click to collapse
Just an updated radio and hboot are the only difference. Who is your provider so I can link you to the correct its firmware.
Sent from my HTC6600LVW using XDA Premium 4 mobile app
Verizon-htc one max
thayl0 said:
Just an updated radio and hboot are the only difference. Who is your provider so I can link you to the correct its firmware.
Sent from my HTC6600LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
VERIZON
Dayliter said:
VERIZON
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=51753483&postcount=129
Sent from my HTC6600LVW using XDA Premium 4 mobile app
boot.img
do i have to use a stock Rom or just go with the viper thats on my phone now)-----or will i have to unlock- root it again
how do i pull the boot.img from the ROM.zip that i am running --
(so please pull the boot.img from the ROM.zip that you're running, and put the boot.img ect.
dont see these answered in the forms tho i am still lookin (i want to get my Ducks in a Row Before i have a go at it)
Dayliter said:
do i have to use a stock Rom or just go with the viper thats on my phone now)-----or will i have to unlock- root it again
how do i pull the boot.img from the ROM.zip that i am running --
(so please pull the boot.img from the ROM.zip that you're running, and put the boot.img ect.
dont see these answered in the forms tho i am still lookin (i want to get my Ducks in a Row Before i have a go at it)
Click to expand...
Click to collapse
The boot.img is located in the vipe zip folder you download that has your rom.zip
Is that what you were asking?
It might just be easier for you to backup your data. And just flash either a stock rom or RUU and it will update itself.
i used RUU and got bootloop now i finaly got it to boot up in to bootloader but when i try to go to recovery it just bootloops Can anyone point me to
the rite direction(verizon htc one max) bootloader says unlocked -s-off -Hboot2.49 Radio 1.36.680122
restored
Dayliter said:
i used RUU and got bootloop now i finaly got it to boot up in to bootloader but when i try to go to recovery it just bootloops Can anyone point me to
the rite direction(verizon htc one max) bootloader says unlocked -s-off -Hboot2.49 Radio 1.36.680122
Click to expand...
Click to collapse
-------------------------------------------------------------------
Never mind i kelp tinkering till TWRP some how booted up and restored to a backup. Thank GOODNESS
Before i use verizon RU should i 1st flash( Stock_Rooted_VZW_2.16.605.2.zip) in place or my viper 1.0.1--
-I dont have my origanl stock or recovery---i am tryin to get the OTA 4.4.2 still-I had problems when i tryed with viper
also should my bootloader be locked or unlocked
Thanks