[Q] Serious problem with GalaxyS2 GT-I9100 SIM Card - Galaxy S II Q&A, Help & Troubleshooting

hi , im up awake for the last 48 hours searching for ways out of what im facing ! .. no use ! so i thought someone here would diffidently got a helpful answer for my problem ..
phone info :
GalaxySII GT-I9100
PDA: I9100JPKG2
CSC: I9100OJPKG1
NOT Rooted
problem description :
using it for 18 months for no problem , 48 ago and suddenly !! .. the phone can not detect or read SIM Card anymore !
ways i have tried :
read lots of threats in here and did lots of instructions but no way ..and after making sure the problem is not in the usb cable or the sim card or the PC , and i know as a fact its diffidently the phone ( hopefully software problem ) i did the next :
1- reset factory data + format ( no use )
2- tried to connect using usb to flash a new rom using odin ( usb not recognized )
3- tried different 3 cables ( the original one included ) and 2 different PCs .. ( still not recognized )
4- tried Samsung kies ( not connectable )
5- tried to install AirDroid ( still not connected ) checked another mobile with AirDroid connected to the same network , worked like a charm ! ..
so I HAVE NO WAY TO TRANSFER ANY DATA from or 2 my phone EXCEPT THE Micro SD ( external_sd )
6- i searched how to flash a rom using SD , and i got CWM.zip but it always gives me the error :
E:failed to verify whole-file signature
7- i tried another way for a non rooted devices like mine using a file called ( update.zip )
same error E:failed to verify whole-file signature
8- i searched again for how to root the mobile with SD but all links and videos refers me to using USB and Odin which is not working in my case
so im stuck and not sure if im on the right track or not !!
note: im a noob , i used to use Odin to do all these stuff ! now with the SD card ONLY way to fix my phone , i feel like i have no access over anything
could any one here advice me if the ( not reading the sim card problem ) would be fixed by flashing the rom and installing a new one ?
if yes ! how to do that using only the SD memory ! ...
Thanks

update : tried the CWM ( not touchable virsion ) still no use ..

Try inserting a different SIM card from the same carrier to se if your device is able to use that SIM card.
Edit: and get some sleep.
Sent from my digital submersible hovercraft.

thanks i did sleep 6 hours , sure i tried different sim from same and different carrier , no use ! .. all sims working fine on other phones , when i try them on my SGS2 never works like they never exists ..

Backup everything, use nuke and kernel cleaning scripts to erase the device, factory reset and flash stock ROM. If you'll see no improvement, take the phone to a service center.
Sent from my digital submersible hovercraft.

f-r said:
Backup everything, use nuke and kernel cleaning scripts to erase the device, factory reset and flash stock ROM. If you'll see no improvement, take the phone to a service center.
Sent from my digital submersible hovercraft.
Click to expand...
Click to collapse
Backup everything - Done using SD
use nuke and kernel cleaning scripts to erase the device - how to do that using SD ?
factory reset and flash stock ROM using android system recovery <3e> ? or a custome recovery system ?

dont know about ur sim but if u want to root without using a computer then check this thread http://forum.xda-developers.com/showthread.php?t=2050297
i guess if u want to root ur phone to try one of the rooted methods to solve ur problem
its basically an app that u install on your phone and it will root your phone
btw is ur imei intact?

ok now trying downloading the apk to my device , regarding my imei intact ! i dont know what that means ! how can i know ? if there's a secret code to dial to get these info for you that would be great ! .
will post the result after trying the apk

the app only roots ur phone.,it wont fix ur problem ....and u do lose ur warranty by rooting
check imei in settings under about or *#06#

The app is nit working ..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also the imei shows this ...
Doesnt look good ha ?
Sent from my GT-I9100 using xda app-developers app

ok it seems u have a software issue related to modem.....try getting a stock firmware from sammobile or samsung-updates.com and flash the stock firmware
did u try to manually install drivers for the phone
there is a windows app called 1click root ..try that ...i believe tht comes with the drivers.
also dd u exit kies when using odin. (exit as in kill all kies processes).

ammar1514 said:
ok it seems u have a software issue.....try getting a stock firmware from sammobile or samsung-updates.com and flash the stock firmware
did u try to manually install drivers for the phone
there is a windows app called 1click root ..try that ...i believe tht comes with the drivers.
also dd u exit kies when using odin. (exit as in kill all kies processes)
Click to expand...
Click to collapse
i have my original stock and kernel backed up on my PC and my External SD , but i can not install them cuz the usb is not working on any computer , i tried install and uninstall kies and the gt-i9100 drivers tons of times for no use ! thats why i think the only solution would come from the SD ...
anyway .. i'll try 1click and let u know , thanks for your following and fast responding ammar

no problem... ...glad to help...if u appreciate it just press the thanks button :thumbup:
if u can just get root then you should be able to flash a stock firmware from ur phone without needing a computer. (do still have warranty)?

stylishx said:
The app is nit working ..
View attachment 1734731
Also the imei shows this ...
View attachment 1734734
Doesnt look good ha ?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
and you're sayin all of these happened outta the blue?
How come you haven't rooted in the past 72 hours?
You're gonna need to.
Sent from the little guy

installed 1click to my pc .. but as expected , the usb still not recognized .. and i think the USB wont work until i flash the rom and kernel ! .. using the sd ! .. and i have no i dea how to that while the andrioid recovery <e3> is denying all my CWM installing trials ! ..

gastonw said:
and you're sayin all of these happened outta the blue?
How come you haven't rooted in the past 72 hours?
You're gonna need to.
Sent from the little guy
Click to expand...
Click to collapse
i tried my best ! do u have a way to root the device using the SD ?

you are using gingerbread? still...
check if you have an update available in settings

yeah it was very fine sense i got the sgs2 , and sure i can not do anyupdates sense this is not the original rom of the device , plus there's no sim card ! so when i click update , i get the no sim card error ...

do u still have warranty?
otherwise you will have to find a way to flash a temporary cwm.zip ...but ya i havent been able to get any of those to work so i cant advise on that.

No warrenty anymore .. Im on my own now .. And yeah thats what im.trying to do .. All jelp i need is how to do it using the sd card sense the recovery <3e> is denying all installations
Sent from my GT-I9100 using xda app-developers app

Related

[GUIDE] How to recover your phone via PC companion!

I see most of you dont know how to recover your phone using pc companion.. Alright, first you must have the latest Sony Ericsson PC companion which you can find here..
http://www.sonyericsson.com/cws/sup...ads/subject/pccompanion/xperiax10?cc=gb&lc=en
1. Backup all your data and apps! (to be safe)
2. Open up PC companion and click on support zone (do not connect your phone yet)
3. Click on the Phone Software Update
4. It will says could not find phone because you havent connect it yet! so, dont connect it and click on the repair phone like this picture ---->
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5.after you have click it.. it will show this.. just click continue and tick the box
6. Wait for it to prepare..
7. After it has been prepare, it will go to this section where you have to choose your phone.. so, go find your phone and select it
8. Follow the steps and procedure that is shown and you're done recovering your phone
connect your phone when you saw this pic.. do not connect until you see this pic.. otherwise, it will not work
Nice hr7.Im wondering if people are missing the bit where it says you must visit a website inorder to get the continue button activated.
I cant see how else the box with connect your phone isnt appearing.....
Sent from my X10 using XDA App
theunderling said:
Nice hr7.Im wondering if people are missing the bit where it says you must visit a website inorder to get the continue button activated.
I cant see how else the box with connect your phone isnt appearing.....
Sent from my X10 using XDA App
Click to expand...
Click to collapse
If you see those just go to the website and close it back and click continue.. so,far i've tried so many roms with so many problems.. so, i have to change to stock roms back.. this one never fail to help me..
just asking, whether i must unlock my bootloader, in case of this recovery. thanks XD sorry, just a noob
You dont need an unlocked bootloader to use PC companion
you dont need to unlock bootloader to use it.. just flash it like normal.. it will restore your phone to stock!
Need tool to access my phone via PC
I have accidentally installed a theme that is probably of higher resolution than my phone screen. Now in locked mode the unlocking option/pattern/graphics is not visible as it is 'spilling out of screen'. Android debugging is on in my device (thankfully). Please suggest me a tool/method using which i can control the phone using PC(or atleast unlock the phone). I (obviously) cannot install anything on my phone, i found some such apps that need installation on phone.
Last option is to flash my phone in recovery with a ROM, but i dont want to do that if other ways possible. my phone is on MIUI ROM developed on 26/9/12
I don't know why we need this
i want to reinstall everything on my phone and i can't do it it just close it self and get's me back to the main menu same if i do repair or upgrade please help
hi, let say the phone out of box is ICS and I updated to JB. If i use repair, it restore to ICS or JB?
ray_J13 said:
hi, let say the phone out of box is ICS and I updated to JB. If i use repair, it restore to ICS or JB?
Click to expand...
Click to collapse
If its a sony update; that is a stock rom update. Repair will restore it to stock firmware.
Question
hi, i have a question
Why i can't install PCC through my Xperia ? i choice mtp and install PCC but always showed "cannot install , please try again latter"
second
I install PCC download it from sony but all off the features show "this application could not be installed, please try again later"
anyone know?
What proxy did PCC use?
new software found error
during the repair there was following error:
new software found something like that..the process lasted for about 6 hrs
what to do?
Device Name XPERIA E dual 1605
firmware version 11.3.A.1.39
ROM: Stock ROM JB
Original Problem
device is on Rooted stock rom.
was trying to unlock bootloader..the process was successful and then I removed the usb and tried to switch on it only to realize that its in Bootloop
As stock ROM does not has recovery I dont know what to do now..Any idea?
Download "Sony Update Service" and restore your Sony Xperia E dual to original firmware again.
This will remove root access ( which you can apply again later).
For more detailed information you could ask for support in the Sony Xperia E forum as they'll have more information to provide than us in the Sony Ericsson XPERIA X10i forum
Sent from my LT26i using Tapatalk
I've been trying this method for hours on my Z1S and it won't work. Whenever I get to the steps where I power down, plug in, and hold volume down it says usb not recognized. I can't get anything to work. I installed every sony driver from the flashtool.exe and still nothing. Now the phone won't even power on . Using Windows 7 64bit by the way.
does anyone have a version of PCC that allows to repair phone? mine (latest one doesnt support that option)i don't see it at all and my phone got fkd up after flashing with(unmarked debugging)my bad V_V
guys i know what fkd my phone i didn't allow debugging via usb how to resurect my phone now please help im about to cry
x10
Well i have a problem i accidently when i was rooting my phone xperia x10 i do something wrong and my phinw wont turn on or turn off and when i try battery method it always turn on alone, i cant fix my phone but i bought it yday, i try to fix it with companion but problem is companion is asking to me to turn off the phone and press backward button etc etc but i cant do that phone automaticlly turn on when i put battery, what to do please help me ://
Tom
Dr Goodvibes said:
Download "Sony Update Service" and restore your Sony Xperia E dual to original firmware again.
This will remove root access ( which you can apply again later).
For more detailed information you could ask for support in the Sony Xperia E forum as they'll have more information to provide than us in the Sony Ericsson XPERIA X10i forum
Sent from my LT26i using Tapatalk
Click to expand...
Click to collapse
will it remove the root access while repairing via sony pc companion?
Hi peeps, new to Android and its mysteries...
Sorry to necro this, but reading this post:
azagen said:
If its a sony update; that is a stock rom update. Repair will restore it to stock firmware.
Click to expand...
Click to collapse
By all means, I'm dumb, so to get this clear, this means that, if he repairs his phone, the original firmware that came with the phone will be installed or it will just reinstall the newest update available?
Sorry... let's say I'm a bit frustrated with something dumb I did and I want to see if I can revert back XD...
THanks in advance guys
I'm quite sure that it installs the latest official Sony Ericsson firmware.
I've done it before, after softbricking my phone and it works perfectly. But after restoring you do need to unlock the bootloader again and root the phone before you can continue with installing a custom ROM.
With the flashtool provided, it is a piece of cake.

Firmare upgrade encountered an issue.Please select recovery mode...

Hi all ,
i had installed an official galaxy s2 4.1.2 rom ,and it worked perfectly. However ,all of a sudden ,it looked like it automatically updated ,and got stucked at "Optimizing app 2 of 9" or something like that . I waited for a while ,when nothing changed i have pulled out the battery and tried restarting it. So it just showed the samsung logo and didnt boot. When i tried entering the recovery mode ,it just stucked with the green JB icon..basically i could just login to download mode . I have tried flashing the rom again via odin ,but it got stucked at "factory.img" and eventually wrote "FAIL" in red . I have tried numerous roms ,stock roms but nothing seemed to work.(same problem). Now when i power up the device ,it says "Firware upgrade encountered an issue. Please select recovery mode in Kies and try again." I have tried flashing just the ClockworkMOD recovery ,but it also got stucked at "NAND Write Start!" and did nothing...
Another thing is ,that im afraid that i was running a really low space on my internal storage (16 gb) and im afraid that this is why nothing can be installed on my device..Could it be possible?
If so ,is there some way to access my storage somehow without booting up my device? Or in a worse case , how can i wipe my storage before the odin flashes?
Thanks in advance.
Listen to this guy right here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And this kid:
Feel free to try another usb socket as well.
Let us know what happens.
:laugh:
Thanks for the reply.
I have tried flashing Siyah via odin 1.85 ,but it got stucked at "NAND Write Start!!" ...
Any ideas?
Sipovka said:
:laugh:
Thanks for the reply.
I have tried flashing Siyah via odin 1.85 ,but it got stucked at "NAND Write Start!!" ...
Any ideas?
Click to expand...
Click to collapse
Try another odin version/usb cable/usb port/another pc/laptop.
I have tried different usb ports ,different computer and also different Odin version.
When i am trying to flash a complete rom ,it stucks at factoryfs.img,and if i am flashing just a kernel ,it stucks at "NAND Write Start" ...I have only one usb cable though , but it should be working fine because i was able to transfer files with it not long ago.
Could it be that lack of storage on my internal card is causing this kind of problem...?
Which sgs2 model do you have? (I9100, I9100G, I9100M, I9100P, I9100?, etc etc etc).
Which specific rom/files did you flash? (link)
These are the questions you should have answered in your first post prior to writing anything else. Without this info anything else you write is useless.
Can you provide screen shot of ODIN before clicking flash button.
Thanks for reply ,i will post soon the screenshot ,just need to gain one more post (10 or more
for posting screeshots.
I have a I9100 model and i tried a bunch of official roms for that model from different countries ,which did work for me in the past for sure ,because some of them i have kept on my hard drive.
Anyway ,here is the download link : http://www.sammobile.com/firmware/?page=3&model=GT-I9100&pcode=PTR&os=1&type=1#firmware
I am downloading the 4.03 version PDA I9100JHLPC CSC I9100PTRLPD
http://www.hotfile.com/dl/177046516/65bd55e/I9100JHLPC_I9100PTRLPD_PTR.zip.html - actual download link
This is the screenshot of my odin before the flash :
And this is the image after the flash ,where it gets stucked :
Sipovka said:
I have a I9100 model and i tried a bunch of official roms for that model from different countries ,which did work for me in the past for sure ,because some of them i have kept on my hard drive.
Anyway ,here is the download link : http://www.sammobile.com/firmware/?page=3&model=GT-I9100&pcode=PTR&os=1&type=1#firmware
I am downloading the 4.03 version PDA I9100JHLPC CSC I9100PTRLPD
http://www.hotfile.com/dl/177046516/65bd55e/I9100JHLPC_I9100PTRLPD_PTR.zip.html - actual download link
This is the screenshot of my odin before the flash :
And this is the image after the flash ,where it gets stucked :
Click to expand...
Click to collapse
Try flashing jb leak (phone, csc & modem, nothing else).
If that doesn't work, we could be talking nand corruption.
Thanks dude ,i will try it now.
What does it mean ,"nand corruption"?
Sipovka said:
Thanks dude ,i will try it now.
What does it mean ,"nand corruption"?
Click to expand...
Click to collapse
device's internal memory corrupted, can't write/read it.
That's what partitions (pit files) are for.
Well ,that didnt work as well...same scenario. I tried flashing just the rom via pda ,i tried all 4 files at the same time ,i tried just the pit...always got stucked.
I guess i will take it to my mobile service provider ,unless there is something else i could try?
P.S - If my internal card is corrupted , will they be able to see i flashed a custom rom and rooted the device?
Sipovka said:
Well ,that didnt work as well...same scenario. I tried flashing just the rom via pda ,i tried all 4 files at the same time ,i tried just the pit...always got stucked.
I guess i will take it to my mobile service provider ,unless there is something else i could try?
P.S - If my internal card is corrupted , will they be able to see i flashed a custom rom and rooted the device?
Click to expand...
Click to collapse
Lol, don't just flash pit files.
Read something about pit files first. There are a lot of threads regarding this topic.
Still stucked in boot right? no back up whatsoever?
Flash different siya's versions, see if you can get to recovery. When you do, try flashing a rom via CMW.

Samsung Galaxy S duos GT-S7562 Install stock rom

This tutorial shows you how to Flash stock Firmware using Odin on Galaxy S Dous [S7562]
Requirements :--->
1. Odin3.07
2. Samsung Usb Driver
3. Stock Firmware
4. Official USB cable
5. Ofcourse Galaxy S Dous Phone
note :-> click on above requirements to download them..
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Flashing Tutorial :-->
1. Install usb drivers on pc....
2. reboot ur pc
3. Download the ODIN 3.07 & save it in your PC and extract its content to Desktop.
4. Download the update firmware.zip && save it in your PC and extract the update file on your Desktop.
5. Now, turn off your Samsung Galaxy S duos device
6. Boot your S Duos device into the Download mode by pressing [ Volume down + Menu + power ] buttons on the same time.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. now ur phone will boot into download mode ........u will see a "WARNING" like following pic.....
8. now press "VOLUME UP" button to enter into download mode :--> like the following pic -->
9. Now open "ODIN 3.07.exe" on desktop & attach ur phone to ur pc using stock usb cable.
10. When the connection is established with odin , u will be notified with the “added” message that will be displayed on the Odin interface, the ID:COM section should be colored on yellow or blue.
11. click on PDA button && select the S7562XXXXXX_S7562XXXXXX_XXXHOME.tar u extracted on desktop [file name may differ ]
12. now click on "START" button & it will take some time to flash the firmware ....
Note:-> DON'T interrupt the flashing process, it may brick ur device [ soft or hard brick]
13. U will see a "PASS" & "RESET" on ODIN application...
http://forum.xda-developers.com/attachment.php?attachmentid=2052420&thumb=1&d=1371571545
14. Ur phone will reboot automatically & u should be booted successfully ....
15. enjoy [ u have flashed stock firmware successfully on ur device ].:highfive::good::fingers-crossed:
F.A.Q :->
1.) If the ODIN get stuck ?
ANS:->
Close the ODIN.
Disconnect your device from the PC by removing the USB cable.
again connect the device with pc.
again open Odin
Repeat the tutorial.
2.) If your device gets a Boot Loop [ boot animation agian & agian ] ?
ANS:->
Reboot device into the Recovery Mode [ VOLUME UP + DOWN + MENU + POWER ]
Perform a “wipe data factory reset” and after that “wipe cache partition”.
Then choose “reboot system now”
_______________________________________________________________________________________________________________________
Direct download links for latest firmwares of some countries :---------->
1. Latest INDIAN Firmware --> https://docs.google.com/file/d/0B4oKK_gDpwCYQ2E2eTdYN3ozZkE/edit?usp=sharing (google drive link)
2. old Pakistan Firmware :-> https://hotfile.com/dl/182607517/5c4a6e7/S7562XXALJ4_S7562OJVALJ1_PAK.zip.html
3. old Australia Firmware :-> https://hotfile.com/dl/182237627/6d44880/S7562XXALIC_S7562XSAALI4_XSA.zip.html
3. old Malaysia Firmware :-> https://hotfile.com/dl/181722186/1341499/S7562XXALJ4_S7562OLBALH5_XME.zip.html
3. old Sri Lanka Firmware :-> https://hotfile.com/dl/229450235/834a3ca/S7562XXBMF2_S7562ODDBMF1_SLK.zip.html
_______________________________________________________________________________________________________________________
I am Not Responsible For It
_______________________________________________________________________________________________________________________
regards,
Utkarsh Mahajan
www.568team.blogspot.com
a lifesaver
You just saved my day...Cheers,hope it will work
[REQ] Stock ROM Samsung S Duos 2 GT-S7582
Hi, everyone I just deleted some system apps which i should have deleted, so i think i will have to flash the stock rom again. Can anyone please provide me the stock rom,
rajnish357 said:
Hi, everyone I just deleted some system apps which i should have deleted, so i think i will have to flash the stock rom again. Can anyone please provide me the stock rom,
Click to expand...
Click to collapse
Just search 'Samsung galaxy S duos gt s-7562 Stock rom' in google and u will see a link from idroidspace.com, click on that and find your stock rom according to your country !
Sent from my GT-S7562 using XDA Premium 4 mobile app
I upgraded from a phone from China, I put it in German software and no signal. The Chinese software was. I live in Hungary, and T-Mobile's.
U must download the stock rom for that device and select china as country; then it will be ok !
Sent from my GT-S7562 using XDA Premium 4 mobile app
ajiththiruvatta said:
U must download the stock rom for that device and select china as country; then it will be ok !
Sent from my GT-S7562 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Either way I try, there is no signal. Any firmware do it does not change the baseband! S7562ZCMH1 only. Need help
Edit: Original rom: S7562ZCAMH1_S7562CHNAMH1_S7562ZCMH1_HOME.tar
Work phone signal, any sim card, but no Play Store and hungarian language...
Edit 2:The Play Store, I managed to do it, but not the Hungarian language
gt 7582
plz help me my galaxy s duos 2 is stocked i need rom
rajnish357 said:
Hi, everyone I just deleted some system apps which i should have deleted, so i think i will have to flash the stock rom again. Can anyone please provide me the stock rom,
Click to expand...
Click to collapse
http://terafile.co/1c4339953555/S7582XXUAMK3_S7582ODDAMK1_INU.zip
first signup then download
its indian INU Version rom, odin not included
shahrukh.sk said:
You just saved my day...Cheers,hope it will work
Click to expand...
Click to collapse
i cant open my galaxy s duo after partitioning it... what should i do?? i already tried using odin but it doesnt recognize my phone... pls help...
I Have problem
plz help me
moftah1 said:
I Have problem
plz help me
Click to expand...
Click to collapse
When did this shows ?? R u able to enter download mode ???
Sent from my GT-S7562 using XDA Premium 4 mobile app
How its possible
ajiththiruvatta said:
When did this shows ?? R u able to enter download mode ???
Sent from my GT-S7562 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have never experienced this problem
and i have wrote i am not responisible but i may help you search on internet
I'm having a problem: I need to flash a different baseband on my phone to be able to install a custom ROM (if I don't I won't be able to call and receive calls or use SMS), but whenever I flash a new ROM the baseband won't change. I heard in this thread http://forum.xda-developers.com/showthread.php?t=2625200 that I can flash only the baseband using the Fat.bin file inside the stock ROM, but I'm afraid this might brick my phone since the thread doesn't have much feedback. And before you ask, yes, I'm entering download mode by powering off then Vol down+Home+Power.
I used the ROM (PMP Ultra) for a little bit and I really loved it, but I can't use it if I'm unable to use SMS and call other people.
BigThing said:
http://terafile.co/1c4339953555/S7582XXUAMK3_S7582ODDAMK1_INU.zip
first signup then download
its indian INU Version rom, odin not included
Click to expand...
Click to collapse
don't need to sign up
try regular download
---------- Post added at 03:16 AM ---------- Previous post was at 03:09 AM ----------
Rockerbacon said:
I'm having a problem: I need to flash a different baseband on my phone to be able to install a custom ROM (if I don't I won't be able to call and receive calls or use SMS), but whenever I flash a new ROM the baseband won't change. I heard in this thread http://forum.xda-developers.com/showthread.php?t=2625200 that I can flash only the baseband using the Fat.bin file inside the stock ROM, but I'm afraid this might brick my phone since the thread doesn't have much feedback. And before you ask, yes, I'm entering download mode by powering off then Vol down+Home+Power.
I used the ROM (PMP Ultra) for a little bit and I really loved it, but I can't use it if I'm unable to use SMS and call other people.
Click to expand...
Click to collapse
don't afraid try it but take a back up of stock firmware before flashing
I tried to flash the fat.bin file, but it didn't work. Right before the phone restarted to complete the flashing I noticed an error message "secure check fail ID: 10 xc" or something similar. Anyone knows what it could mean?
jiegulo said:
i cant open my galaxy s duo after partitioning it... what should i do?? i already tried using odin but it doesnt recognize my phone... pls help...
Click to expand...
Click to collapse
Don't tell me you tried partitioning your internal storage did you?
---------- Post added at 12:50 AM ---------- Previous post was at 12:47 AM ----------
You have bricked your phone bro.Did you try entering Odin mode?
original firmware for all samsung devices
http://www.samfirmware.com/ here you can get all samsung mobile firmware
i am not responsible for happen anything for your phone
i am leaving the xda forums
Flash problem
After flash stock rom my lock screen & power menu not working:crying:. What I have to do now?
saiful725 said:
After flash stock rom my lock screen & power menu not working:crying:. What I have to do now?
Click to expand...
Click to collapse
just reflash

Hard bricked my phone

Hello guys! My coumputor died while I was flashing new ROM and now my hard bricked. I can try and flash again but it gives me enable dram failed 4032 error. Is there any fix for this or is my phone gone?
jagoda1 said:
Hello guys! My coumputor died while I was flashing new ROM and now my hard bricked. I can try and flash again but it gives me enable dram failed 4032 error. Is there any fix for this or is my phone gone?
Click to expand...
Click to collapse
Your phone is not hard bricked.
Hard brick means that your motherboard is faulty.
Your phone is soft bricked. You can try to reflash, the same procedure, but when you connect the phone press the small red button for 20 secconds.
If its not working, try to reinstall the drivers.
Try and see what is going on!
I have same problem ...i buy phone with this rom: https://www.dropbox.com/sc/22sicuooteaw2vq/AAA5zTMjCDKeVEDh3lqtjyEWa
Then i went to flash stock rom.. i download flash tool and installed all driveres ... i run flash tool and start to flashing rom. Rom file name is: p780_row_s124_140403_rooted_twrp_gapps
After flashing is finished ...my phone is stuck. No power, display is black(no light), no led blink when i connect to charger - nothing.
If i connect phone to pc, phone showing red led light and in device manager on pc it showin me phone like USB Serial device (com6) or MediaTek USB Port(com5) on windows7 ...no more mt6589.
What i do wrong?
Pictures:
https://www.dropbox.com/sc/q3k7ij409i3kcmf/AABYUeKPBGodcJq0cfrsc354a
Guy pls help! Sry for my english
Sent from 1+1
teXew said:
I have same problem ...i buy phone with this rom: https://www.dropbox.com/sc/22sicuooteaw2vq/AAA5zTMjCDKeVEDh3lqtjyEWa
Then i went to flash stock rom.. i download flash tool and installed all driveres ... i run flash tool and start to flashing rom. Rom file name is: p780_row_s124_140403_rooted_twrp_gapps
After flashing is finished ...my phone is stuck. No power, display is black(no light), no led blink when i connect to charger - nothing.
If i connect phone to pc, phone showing red led light and in device manager on pc it showin me phone like USB Serial device (com6) or MediaTek USB Port(com5) on windows7 ...no more mt6589.
What i do wrong?
Pictures:
https://www.dropbox.com/sc/q3k7ij409i3kcmf/AABYUeKPBGodcJq0cfrsc354a
Guy pls help! Sry for my english
Sent from 1+1
Click to expand...
Click to collapse
Hi. To do a good job you must tell us what firmware do you want to install: KitKat(Android 4.4.2) or JellyBean(Android 4.2.2).
After that you must know what kind of firmware Stock or Custom.
Or... do you want to start your phone again.
I need one picture of your phone box with stickers on it! There you will see when your phone is made.
This are 2 kinds of phones: made after 03.2014 or before 03.2014.
For those made after 03.2014 you must use a diferent preloader.
I think this is what happent to your phone.
Flash procedure is the same but you must change the preloader.
Here is a link with one preloader and one good firmware.
Link: https://drive.google.com/folderview...VQ3pJeG9vTlh4Y3pMUG9ES3FtX21ZdjlwVzY3VWc#list
This firmware is KitKat, based on CN firmware. It have GAPPS and is ROOTED.
Here is what i use: http://forum.xda-developers.com/lenovo-p780/development/miui-lenovo-p780-t2976347
Good firmware too. It have custom recovery TWRP and GAPPS. ROOTED too. It is KITKAT.
Hope this helps you.
Good Luck.
Tnx for fast respond ...here is pic:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone year is 2013 ... i thought that my phone is ROW so i flash ROW rom(from this thread link) ...maybe that cause phone brick?
Sent from 1+1
I could flash the LIFE ROM for Lenovo P780 (used the china version) but then my 2g signal. I fixed that by flashing new baseband. But now I have a new problem whenever i want to flash a new ROM it dosent work only LIFE ROM works (i have to reflash it everytime)
How did u flash baseband? I constantly receive the same error when i try flash ROM...no progress :/
jagoda1 said:
I could flash the LIFE ROM for Lenovo P780 (used the china version) but then my 2g signal. I fixed that by flashing new baseband. But now I have a new problem whenever i want to flash a new ROM it dosent work only LIFE ROM works (i have to reflash it everytime)
Click to expand...
Click to collapse
Use SP Flash v5 from this link.
---------- Post added at 06:37 PM ---------- Previous post was at 06:36 PM ----------
teXew said:
How did u flash baseband? I constantly receive the same error when i try flash ROM...no progress :/
Click to expand...
Click to collapse
Baseband must be flashed from custom recovery like TWRP or CWM.
For flashng firmware check the drivers... what windows do you use ?
My display not working, so flashing through rcvy is not an option for me :/
...I use w10 on my pc, and w7 on my laptop...
Sent from 1+1
teXew said:
My display not working, so flashing through rcvy is not an option for me :/
...I use w10 on my pc, and w7 on my laptop...
Sent from 1+1
Click to expand...
Click to collapse
So... your phone is sofbrick! You need to flash again one firmware.
On windows 7 you must install the drivers!
Good drivers are located here.
Link1: http://forum.xda-developers.com/attachment.php?attachmentid=2945473&d=1411323831
Link2: http://forum.xda-developers.com/attachment.php?attachmentid=2945474&d=1411323831
First try to install link 1.
If you want me to help you must pm me with an team viewer session!
@stympy who ever are you thank you for helping us. You're a great person.
jagoda1 said:
@stympy who ever are you thank you for helping us. You're a great person.
Click to expand...
Click to collapse
You are wellcome!
If you have problems do not hesitate to ask!
Good Luck.
stympy said:
So... your phone is sofbrick! You need to flash again one firmware.
On windows 7 you must install the drivers!
Good drivers are located here.
Link1: http://forum.xda-developers.com/attachment.php?attachmentid=2945473&d=1411323831
Link2: http://forum.xda-developers.com/attachment.php?attachmentid=2945474&d=1411323831
First try to install link 1.
If you want me to help you must pm me with an team viewer session!
Click to expand...
Click to collapse
Dosnt work : Today i fresh instal w7 and all drivers like u sad but no.
After i installed all drivers, device manager recognizes my phone like device MTK USB Port( no more like MT65.. - same problem).. btw phone reconnect every 15 seconds ...uh
teXew said:
Dosnt work : Today i fresh instal w7 and all drivers like u sad but no.
After i installed all drivers, device manager recognizes my phone like device MTK USB Port( no more like MT65.. - same problem).. btw phone reconnect every 15 seconds ...uh
Click to expand...
Click to collapse
So... I think your phone is in some kind of bootloop.
Try to change your phone for at least 3 hours. Try again after.
Sent from my P780 using XDA-Developers mobile app
@stympy, i read on some Chinese forum that after formatting device(using FlashT) is possible to flash preloader.. but it is risky ... What do u think?
Or what about this methode: https://youtu.be/A3TmXtOA0IA :/
EDIT: Nahh i can't format, same error -.-'
Sent from 1+1

HELP please! I wiped all data from my phone U20i and nothing have on my phone.

Hello all! I'm sorry for this thread but i wiped all data from my phone with CWM... and on my phone have nothing... What can i do? How to fix it? my computer can't recognize it flashtool too... only when i plug in the phone to comp flashtool says device connected flashmode. What can i do now? How to repair my phone? Sony Ericsson Xperia X10 Mini Pro U20i. Can someone have stock FTF rom? or what can i do now please? Thanks for your answer and time and patience! Help please
MadSalted said:
Hello all! I'm sorry for this thread but i wiped all data from my phone with CWM... and on my phone have nothing... What can i do? How to fix it? my computer can't recognize it flashtool too... only when i plug in the phone to comp flashtool says device connected flashmode. What can i do now? How to repair my phone? Sony Ericsson Xperia X10 Mini Pro U20i. Can someone have stock FTF rom? or what can i do now please? Thanks for your answer and time and patience! Help please
Click to expand...
Click to collapse
So i bricked my phone. What must i do please?
MadSalted said:
So i bricked my phone. What must i do please?
Click to expand...
Click to collapse
Grab stock ROM from my private stash here
https://www.mediafire.com/folder/rjdi2rg1baqb2/Stock+X10+mini+pro
Thank you very much! Can somebody help me a good program to access my phone storage ? i mean with rooted access ? MobileGo program dosen't work for me I mean Android Desktop manager all in one for x10 mini Pro Thank you again!
Somebody help please Which program can i use to access my phone SDcard? a tried a lot of but didn't work... I want to install custom rom, but i do not know how to put it on my phone storage . Thanks for your patience and your time
MadSalted said:
Somebody help please Which program can i use to access my phone SDcard? a tried a lot of but didn't work... I want to install custom rom, but i do not know how to put it on my phone storage . Thanks for your patience and your time
Click to expand...
Click to collapse
Do you know somebody who got a Micro SD Card adapter, to USB or normal SD Card if your PC got a SD Card reader, then try this.
Good luck
Emperor.dk said:
Do you know somebody who got a Micro SD Card adapter, to USB or normal SD Card if your PC got a SD Card reader, then try this.
Good luck
Click to expand...
Click to collapse
Well not my microSD card is the problem how to acess my phone storage please?
MadSalted said:
Well not my microSD card is the problem how to acess my phone storage please?
Click to expand...
Click to collapse
I can understand that you already wiped all data, so i'm guessing, that it is not really data on the phone you want, but you want to make it Work Again with fresh original firmware. From here you can decide if you want to flash a custom ROM.
Am I right?
Problem: Your computer can't recognize your X10 mini
Solution: Reinstall drivers. Open the folder where Flashtool is installed and locate a sub-folder called Drivers. If you can't find it, get it here.
If you are on Windows 8 or 10 you might have to disable driver signature verification (activate testmode). It's easy, read here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Next install the Xperia X10 Mini (bundled with Arc-Play etc. i think) + Fastmode + Fastboot drivers
Now your PC should be able to recognize your X10 mini, and Flashtool shuld also be able to flash the FTF above.
You may also want Minimal ADB and Fastboot from here. Easy to flash kernel in fastboot mode.
Tell us if you made it work.
no problem with drivers all works perfect, my stock firmware work fine too. i just want to install custom kernel to my phone So i need program to install CWM + Custom ROM. IDK how to do. SEUS dosen't work anymore and i do not know how to acess my phone storage via program. I'm using win10 and all drivers works fine. Can you give me a quick tutorial for custorm rom installation please? i need working rom with good kernel. Just need to access my phone storage not my micro SD card To install CWM need a flash file, and to install rom need to access my Phone Storage not my MicroSD card. Help please if you know what i mean Thank you very much!
MadSalted said:
no problem with drivers all works perfect, my stock firmware work fine too. i just want to install custom kernel to my phone So i need program to install CWM + Custom ROM. IDK how to do. SEUS dosen't work anymore and i do not know how to acess my phone storage via program. I'm using win10 and all drivers works fine. Can you give me a quick tutorial for custorm rom installation please? i need working rom with good kernel. Just need to access my phone storage not my micro SD card To install CWM need a flash file, and to install rom need to access my Phone Storage not my MicroSD card. Help please if you know what i mean Thank you very much!
Click to expand...
Click to collapse
I wrote this a 100 years ago, might help you
https://forum.xda-developers.com/showthread.php?t=1194499
Bypass the cwm install part and flash kernel with build-in cwm like this for Gingerbread.
Thank you Very MUCH!
Emperor.dk said:
Grab stock ROM from my private stash here
https://www.mediafire.com/folder/rjdi2rg1baqb2/Stock+X10+mini+pro
Click to expand...
Click to collapse
thank you man i have same problem with friend above!!! :good:

Categories

Resources