Hey guys,
i have an issue with my wifi connection, but only in one specific place.
Here goes: I can connect and use wifi everywhere(without any problem), but not at my friends house. Wifi connects without a problem, but after that i cannot use it (can't download from market, can't surf, etc.). It says there is an internet connection failure, altough i'm still connected.
I know for sure there isn't a problem with routers, modems, networks, etc. coz i setup his network myself (exactly the same as al the other networks i use) So in this there cannot be a problem. My friend can connect his iphone4, my wife can with S+, even a guy with an ACE can connect and use, except for me and my ACE.
Already reset router, modem and phone (even other firmware), but still nothing!
Hope somebody can help with this, coz i'm really bugged out on this one.
Cheers.
Check if u have a WPA protection.. My ACE doesnt work with Wifi with WPA pwd..
or
Try this:
Go to Wifi Settings, select the hotspot you are connecting to, forget the connection, restart ACE, connect to the hotspot again by entering the password
Hope this helps..
While on the topic of not being able to surf, I can never download anything from mediafire.
consegregate said:
While on the topic of not being able to surf, I can never download anything from mediafire.
Click to expand...
Click to collapse
Hold the link , then open the link in a new tab
Sent from my Ultima Weapon© using XDA App
EmoBoiix3 said:
Hold the link , then open the link in a new tab
Sent from my Ultima Weapon© using XDA App
Click to expand...
Click to collapse
No, i'll download htm files of a few kilobytes always. It's weird.
consegregate said:
No, i'll download htm files of a few kilobytes always. It's weird.
Click to expand...
Click to collapse
It's problem with MediaFire
Sent from my Ultima Weapon© using XDA App
tvigyan said:
Check if u have a WPA protection.. My ACE doesnt work with Wifi with WPA pwd..
or
Try this:
Go to Wifi Settings, select the hotspot you are connecting to, forget the connection, restart ACE, connect to the hotspot again by entering the password
Hope this helps..
Click to expand...
Click to collapse
Hey,
thnx, but tried both already and it didn't work.
Cheers
consegregate said:
While on the topic of not being able to surf, I can never download anything from mediafire.
Click to expand...
Click to collapse
Hmm, strange i can't download either. Nothing, not even textdocuments always get message "download failed".
Try to find out from this other Ace which modem he has installed. Check yours as well. If they are different, it can be a clue...
Sent from my GT-I9000B using Tapatalk
consegregate said:
No, i'll download htm files of a few kilobytes always. It's weird.
Click to expand...
Click to collapse
I had this problem i found to get around it i started using Skyfire worked 8/10 times..
Lior Messer said:
Try to find out from this other Ace which modem he has installed. Check yours as well. If they are different, it can be a clue...
Sent from my GT-I9000B using Tapatalk
Click to expand...
Click to collapse
Hey,
thnx, but already tried this too. The other ACE has Froyo.
I already tried Froyo, GB kph and GB kpn, but evrytime the same result.
Cheers
aronfeerick said:
I had this problem i found to get around it i started using Skyfire worked 8/10 times..
Click to expand...
Click to collapse
Hey, thnx.
This is a browser, right?
Will try it, but that doesn't solve the problem that i can't use whattsapp, market, etc.
The strange thing is i can reciev whattsapp messages, but cannot send them.
Cheers
Sgace said:
Hey, thnx.
This is a browser, right?
Will try it, but that doesn't solve the problem that i can't use whattsapp, market, etc.
The strange thing is i can reciev whattsapp messages, but cannot send them.
Cheers
Click to expand...
Click to collapse
APN settings malfunction ? Or EiFi malfunction ?
Sent from my Ultima Weapon© using XDA App
Might be the password u applied is wrong. Forget the network and rejoin it with correct password.. Hope it works..
Sent from my GT-S5830 using XDA Premium App
EmoBoiix3 said:
APN settings malfunction ? Or EiFi malfunction ?
Sent from my Ultima Weapon© using XDA App
Click to expand...
Click to collapse
No, everything is working fine with other networks.
GambiTx said:
Might be the password u applied is wrong. Forget the network and rejoin it with correct password.. Hope it works..
Sent from my GT-S5830 using XDA Premium App
Click to expand...
Click to collapse
Nope, already tried this like 100 times, but thnx.
Gonna try a diffrent way now. Trying it with some tweaks in build.prop, a tweakscript, implemend a dns-server file and gonna mess around with wep/wpa again.
Hope this will workout.
Will report back in a day or 2.
Thnx and cheers.
weirdo wifi
Check on router setting the ip address your phone is using is not bind to another device,s mac address this is on the router settings something like ip & Mab binding.
It could be the ip you are trying to use alocated for use by another device only.
However u will be able to connect to the router it will show in the router you phone is connected and alsoshow in wifi on the phone you are connected but you will NOT be able to connect to the internet.
durbancurry said:
Check on router setting the ip address your phone is using is not bind to another device,s mac address this is on the router settings something like ip & Mab binding.
It could be the ip you are trying to use alocated for use by another device only.
However u will be able to connect to the router it will show in the router you phone is connected and alsoshow in wifi on the phone you are connected but you will NOT be able to connect to the internet.
Click to expand...
Click to collapse
Hey,
Thnx, will try this ASAP. This might be it.
Question: If my phones ip-adress is indeed the problem, is it possible to change it without any problem? Or should i delete the binded ip at the router?
Cheers.
ip no problem
You can set another ip address manually for phone first find out what routers ip address is
normally 192.168.1.1 is default for lots of routers then see router has DHCP
enabled this means router issues ips to devices. if it is enabled the leave your phone as is and check on the router under ip & Mac binding see if it is enabled UNanble u can always put it back
even better see on router what ip your phone is using then checxk in ip & mac binding that it is not assigned to another device for use. if it is u can delete that binding.
binding means you give a certain device's mac address a certain ip so only that device can you that ip
for example say your phones mac adress is 12:34:56:78:90:00 and you assign or give it ip adress 192.168.1 10 then in theory only your phone can use this ip. THIS not always the case depends on what make router. Whilst we are at that what is your router model.
Look in these places on roter
DHCP settings
IP & Mac Binding.
IP address filtering ( perhaps the ip your phone is using is blocked from internet, it will still be connected but cant access the internet) shout if you need more info
sorry got carried away yes delete bind ip you can always rebind. this below / following is from my router most routers are similar.
IP & MAC Binding Help
To manage the computers well in the LAN, you could control access among computers by ARP Binding.
MAC Address - The MAC address of the controlled computer in the LAN.
IP Address - The assigned IP address of the controlled computer in the LAN.
Bind - Whether or not enable the arp binding.
Modify - Edit or delete item.
Link - Turn to IP & MAC Binding Setting page.
Example: If you want assign 192.168.1.4 to PC A (MAC: 00-E0-4C-00-07-BE), and any other PCs could not use this IP,you should first enable "ARP Binding", and add a new item as below.
ID MAC Addrss IP Address Bind Modify
1 00-E0-4C-00-07-BE 192.168.1.4
DHCP ip Address Reservation Help
When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to servers that require permanent IP settings.
MAC Address - The MAC Address of the PC that you want to reserve IP address for.
Reserved IP Address - The IP address of the router reserved.
To Reserve IP Addresses:
Enter the MAC Address (The format for the MAC Address is XX-XX-XX-XX-XX-XX.) and the IP address in dotted-decimal notation of the computer you wish to add.
Click the Save button when finished.
To modify a Reserved IP Address:
Select the reserved address entry as you desire, modify it. If you wish to delete the entry, make all of the entry fields blank.
Click the Save button.
shout if you need more help
durbancurry said:
You can set another ip address manually for phone first find out what routers ip address is
normally 192.168.1.1 is default for lots of routers then see router has DHCP
enabled this means router issues ips to devices. if it is enabled the leave your phone as is and check on the router under ip & Mac binding see if it is enabled UNanble u can always put it back
even better see on router what ip your phone is using then checxk in ip & mac binding that it is not assigned to another device for use. if it is u can delete that binding.
binding means you give a certain device's mac address a certain ip so only that device can you that ip
for example say your phones mac adress is 12:34:56:78:90:00 and you assign or give it ip adress 192.168.1 10 then in theory only your phone can use this ip. THIS not always the case depends on what make router. Whilst we are at that what is your router model.
Look in these places on roter
DHCP settings
IP & Mac Binding.
IP address filtering ( perhaps the ip your phone is using is blocked from internet, it will still be connected but cant access the internet) shout if you need more info
Click to expand...
Click to collapse
durbancurry said:
sorry got carried away yes delete bind ip you can always rebind. this below / following is from my router most routers are similar.
IP & MAC Binding Help
To manage the computers well in the LAN, you could control access among computers by ARP Binding.
MAC Address - The MAC address of the controlled computer in the LAN.
IP Address - The assigned IP address of the controlled computer in the LAN.
Bind - Whether or not enable the arp binding.
Modify - Edit or delete item.
Link - Turn to IP & MAC Binding Setting page.
Example: If you want assign 192.168.1.4 to PC A (MAC: 00-E0-4C-00-07-BE), and any other PCs could not use this IP,you should first enable "ARP Binding", and add a new item as below.
ID MAC Addrss IP Address Bind Modify
1 00-E0-4C-00-07-BE 192.168.1.4
DHCP ip Address Reservation Help
When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to servers that require permanent IP settings.
MAC Address - The MAC Address of the PC that you want to reserve IP address for.
Reserved IP Address - The IP address of the router reserved.
To Reserve IP Addresses:
Enter the MAC Address (The format for the MAC Address is XX-XX-XX-XX-XX-XX.) and the IP address in dotted-decimal notation of the computer you wish to add.
Click the Save button when finished.
To modify a Reserved IP Address:
Select the reserved address entry as you desire, modify it. If you wish to delete the entry, make all of the entry fields blank.
Click the Save button.
shout if you need more help
Click to expand...
Click to collapse
Wohw, wohw, that's alot of stuff to think about. Will try it ASAP.
Thank you very much for sharing your knowledge!
Cheers
hi,
i've found an utility that gives me the wan ip but i need my personnal (internal to my network) ip, any clue ?
subsidiary : any method to configure wifi ? (ex: ip fixing or adhoc mode, etc.)
thanks !!
There's an app in the webos catalog called what is my IP
if you can open up a terminal command line from preware, just type ifconfig -a
you can also look on your router to see what was assigned or go under wifi settings and set a static ip. i prefer a static ip anyways just so i know what it's on for connection purposes.
thanks both!
what's the app for terminal ?
fbp2k said:
thanks both!
what's the app for terminal ?
Click to expand...
Click to collapse
there's an xterm app in preware. it's kind of annoying to use, but it will work fine for what you need.
If its the only device on the network look in the WiFi router admin panel
Sent from my HTC Sensation Z710e using XDA App
fbp2k said:
hi,
i've found an utility that gives me the wan ip but i need my personnal (internal to my network) ip, any clue ?
subsidiary : any method to configure wifi ? (ex: ip fixing or adhoc mode, etc.)
thanks !!
Click to expand...
Click to collapse
on the touchpad, have you tried settings->wifi-> press on name of network you are connected to?
don't think you need to install anything.
I have a Mac mini running OS X 10.8.2 with the OS X Server 2.2.1 from the app store, and I have set up the VPN using L2TP in the Server.app interface. I have tested this VPN connection using a Macbook, which works, but I can't figure out how to get Android's built-in VPN to work.
Current set-up:
I have opened ports 500, 1701, 1723, and 4500 on my router.
I am using a dynamic DNS from no-ip.com, we'll say hostname.no-ip.org
I have set a "Shared Secret", we'll say 1234567890
I have set up an account for my android phone on the server, let's say the user name is "nexus" and the password is "google"
On the Macbook, I simply use the DNS, the secret, and credentials that I have set up on the server, and it connects.
On my Android device (Nexus 4 4.2.2) I am using the following settings:
Name: Mac Server
Type: L2TP/IPSec PSK
Server address: hostname.no-ip.org
LT2TP secret: (not used)
IPSec identifier: (not used)
IPSec pre-shared key: 1234567890
When I try to connect using these settings, it prompts for the username and password, so I enter "nexus" and "google". It sits there saying "Connecting..." for maybe 30 seconds and then it just goes back to "Disconnected" with no error or other message. I have also tried putting the "Shared Secret" in the L2TP secret field, but with the same result.
Is the built-in Android VPN simply incompatible with OS X Server's VPN? Or have I misconfigured something?
Note: I would strongly prefer to continue using L2TP, and not the less-secure PPTP VPN
Ok, so I have managed to connect to the VPN when doing it INSIDE the network to the IP of the server (lets say 192.168.1.2). If I change the address to hostname.no-ip.org it won't connect, although it is working for everything else (such as web, etc).
I have tried on my iPad and I can connect just fine either from inside the network or over 3G connection.
On the Nexus I have tried to change the hostname.no-ip.org to my public IP address but it will not work either.
The funny thing is that when I try to make it work outside the server, the mac server log will show nothing, while every other test I run it logs it perfectly.
I think something is very broken in the way VPN is implemented in Android. Am I the only one finding himself in this situation?
....your missing a very large part.....
FORWARD YOUR PORTS ON YOUR ROUTER
Also in your router look for anything relating to VPN.
Also some routers will not alow you to conect from the external ip internally. I hate routers like that..
and why run osx server on a macbook?
if you want a secure home vpn, go find a old windows computer any p4 will do and install linux and install vpn services on it.