Hey Guys,
I soft bricked my phone before but had my EFS backed up, restored it and now it works again. (I wiped everything off my phone I think)
I installed liquidsmooths 4.2.2 rom and when I uninstall apps now, this error message always pops up although the app still gets uninstalled.
cannot read /data/xposed/modules.whitelist
What does it mean?
Also now some of the codes such as *#1234# to see the phones details do not work as well as the code *#7284# to access PhoneUtil to name a few.
The code to view my IMEI no. works though.
Another question I have is that my phone use to register I think 13.6GB or 14.9GB (something like this, but it was 100% more than 11GB) before I soft bricked it. But now it says I only have 11GB to use. Is there a problem with my PIT file or something?
Do I need to install the stock jellybean firmware (I believe it came from Hong Kong, 4.1.1) first or something? Not too sure why these changes occurred.
Any help is appreciated!
Did a bit of reading, and came across a similar post that maybe there's 2 partitions? (in regards to the storage being 11GB now)
Any input guys?
Same problem, i uninstalled f-secure ( just tried it) and after then i got that error message and phone freezed, rebooted uninstalled different app and same message but no freezing. I'm running jellybam 6.30 android 4.2.2.
i had this error too on rootbox, and i solved it by installing xposed framework from the rom's settings.
No error now
oh ok, do you know what the error actually means though? My phone doesn't freeze and operates fine but that error pops up whenever I uninstall something and not knowing what it means is annoying me haha
Do the s3 codes still work for you guys?
I have exactely the same problem. Did anyone find a solution?
If you try to install the app you uninstalled before, does it install? It doesn't install on my phone!
kofe said:
i had this error too on rootbox, and i solved it by installing xposed framework from the rom's settings.
No error now
Click to expand...
Click to collapse
This is the answer right here. Go to Settings, Interface, Install Xposed DPI Installer. That is all. Kofe answered, some people don't read. As for what it is? Something to do with DPI? lol.
aztr0 said:
This is the answer right here. Go to Settings, Interface, Install Xposed DPI Installer. That is all. Kofe answered, some people don't read. As for what it is? Something to do with DPI? lol.
Click to expand...
Click to collapse
Thanks that solved it for me
yeah thanks for that, forgot to say thanks
aztr0 said:
This is the answer right here. Go to Settings, Interface, Install Xposed DPI Installer. That is all. Kofe answered, some people don't read. As for what it is? Something to do with DPI? lol.
Click to expand...
Click to collapse
The bigger issue is that the message should not flash onto the screen and disappear so quickly you can barely read it and also should indicate how to cure it.
aztr0 said:
This is the answer right here. Go to Settings, Interface, Install Xposed DPI Installer. That is all. Kofe answered, some people don't read. As for what it is? Something to do with DPI? lol.
Click to expand...
Click to collapse
pl guys...i dont understand a single thing.....which settings are you refering???
---------- Post added at 10:19 PM ---------- Previous post was at 10:02 PM ----------
aztr0 said:
This is the answer right here. Go to Settings, Interface, Install Xposed DPI Installer. That is all. Kofe answered, some people don't read. As for what it is? Something to do with DPI? lol.
Click to expand...
Click to collapse
pl help....dont understand a thing...installed samHD v3.2 custom rom on my canvas hd. the apps which needed root access are not running along with dis msg. pl help me out...
Don't understand your post .
JJEgan said:
Don't understand your post .
Click to expand...
Click to collapse
today i installed the samHD v3.2 custom rom on my canvas HD. all went well.
but now cannot use any of my apps that need root access. i installed superuser from CWM recovery but nothing happened with cannot read whitelist message. please help me out.
What is a canvas HD ???
Its not a Samsung I9300/5 so you are in the wrong forum .
Its a clone / fake SGS3 type MTK MT6589
Firmware or mods from here may brick your non I9300 .
You need to find a fake phone forum .
jje
JJEgan said:
What is a canvas HD ???
Its not a Samsung I9300/5 so you are in the wrong forum .
Its a clone / fake SGS3 type MTK MT6589
Firmware or mods from here may brick your non I9300 .
You need to find a fake phone forum .
jje
Click to expand...
Click to collapse
canvas HD is a product from a indian company Micromax. samHD is custom rom based on samsung galaxy s4. after installing this rom i was facing this whitelist error. i googled it and found this forum. pl do something...pl
samikdada said:
pl guys...i dont understand a single thing.....which settings are you refering???
---------- Post added at 10:19 PM ---------- Previous post was at 10:02 PM ----------
pl help....dont understand a thing...installed samHD v3.2 custom rom on my canvas hd. the apps which needed root access are not running along with dis msg. pl help me out...
Click to expand...
Click to collapse
To fix the : <b>cannot read /data/xposed/modules.whitelist </b> problem as indicated in the title, it means that you have a rom that utilizes the Xposed DPI application. the error means that the application is residing on your phone but is not installed. That is why you have to go to your phone Settings, Interface, Install Xposed DPI Installer and click on install.
That will remove your cannot read /data/xposed/modules.whitelist error when removing apps from your phone.
Cheers
error
aztr0 said:
This is the answer right here. Go to Settings, Interface, Install Xposed DPI Installer. That is all. Kofe answered, some people don't read. As for what it is? Something to do with DPI? lol.
Click to expand...
Click to collapse
I have a tablet with android 4.0 ice cream sandwich but nose where are these settings and options .... I do not find I stay I have this same error adjustments
---------- Post added at 03:50 PM ---------- Previous post was at 03:46 PM ----------
I have a tablet with android 4.0 ice cream sandwich I get this error can not read / data / xposed / modules.whitelist
when I enter the installer xposed I can not download anything from google play and I can not download sd data I would like to help me fix this problem lei out there who need to access settings or something but I fail partecido solve
adrian uruguayo said:
I have a tablet with android 4.0 ice cream sandwich but nose where are these settings and options .... I do not find I stay I have this same error adjustments
---------- Post added at 03:50 PM ---------- Previous post was at 03:46 PM ----------
I have a tablet with android 4.0 ice cream sandwich I get this error can not read / data / xposed / modules.whitelist
when I enter the installer xposed I can not download anything from google play and I can not download sd data I would like to help me fix this problem lei out there who need to access settings or something but I fail partecido solve
Click to expand...
Click to collapse
This is the galaxy s3 i9300 forum
sorry
slaphead20 said:
This is the galaxy s3 i9300 forum
Click to expand...
Click to collapse
sorry could not understand much spend the community link or acer tablet iconia a100
Deathsting_50cal said:
To fix the : <b>cannot read /data/xposed/modules.whitelist </b> problem as indicated in the title, it means that you have a rom that utilizes the Xposed DPI application. the error means that the application is residing on your phone but is not installed. That is why you have to go to your phone Settings, Interface, Install Xposed DPI Installer and click on install.
That will remove your cannot read /data/xposed/modules.whitelist error when removing apps from your phone.
Cheers
Click to expand...
Click to collapse
i can't find Install Xposed DPI Installer in Settings > Interface.
i'm using CM 10.2 (Android 4.3)
Related
Hi, there..
i just installing Font Installer *Root* when i change the font, and a prompt window asked to reboot the phone, after that my phone just restarting reboot.
Is anyone have experiencing the same problem with me?
UPDATE: Already solved by reflashing, before changes any fonts make sure you have back-up your fonts or your ROM first.
drafha said:
Hi, there..
i just installing Font Installer *Root* when i change the font, and a prompt window asked to reboot the phone, after that my phone just restarting reboot.
Is anyone have experiencing the same problem with me?
Click to expand...
Click to collapse
You mean a boot loop?
I use Font Changer, no problems using it.
What ROM do you have?
i use Font Changer too.
No problem for me.
Reflash your phone.
I'm using Font Installer root. It's working fine.
Sent from my MT11i using XDA App
Hello guys.
I'm using font installer *root* too, but it's not working fine.
The names under the icons appear like this: Inter.XX instead of Internet, or You.XX instead of Youtube. This only happens for icons with big names, f.e. "Google" file name or "Viber" is OK. When the name has 7 letters and above, the problem appears.
Any ideas why or how to try fixing it?
Thanks.
I tried to change font via Rom Toolbox and i had the same situation with you. My phone couldn't reboot and updating with WotanServer was the last chance. It costs 1.99 euro I wont change fonts anymore
drafha said:
Hi, there..
i just installing Font Installer *Root* when i change the font, and a prompt window asked to reboot the phone, after that my phone just restarting reboot.
Is anyone have experiencing the same problem with me?
Click to expand...
Click to collapse
Oh come on ... it's not font installers fault ...it's yours..totally and no excuses.
DID YOU MADE A NANDROID BACKUP BEFORE YOU MESS WITH SYSTEM FILES ???
I guess not that's why you even posted a Q & A here !!!
You didn't even bother reading for a solution to your problem.
Changing fonts does not damage your phone as long as you keep 3 simple rules
Always choose only TTF fonts
Always make sure the font you choose is compatible with your language settings
Always make a backup before changing.
Now just flash a new rom ,custom or Sony's, to get passed that bootloop error you got or search this forum for pandemic's settings and somewhere in his post he gives a CWM zip with Sony Sketch font which will recover your phone without installing new rom.
This will have to be moved to Q & A section by a moderator also.
same here..flash the .ftf is my solution:crying:
Re: [Q] [APP] Font Installer Cause my Phone Can't Reboot
He has given sony sketch font in go settings mod
Sent from my MT11i using Tapatalk 2
Find Stock(.587, or the version you're using) kernel .ftf file and just flash it using flashtool, should fix you problem with no data lost
This is my old thread, my problem already solved by reflashing XD
But, hope this thread can help anyone who also got this problem
Re: [Q] [APP] Font Installer Cause my Phone Can't Reboot
drafha said:
This is my old thread, my problem already solved by reflashing XD
But, hope this thread can help anyone who also got this problem
Click to expand...
Click to collapse
Always when you find solutions
Mention it in OP n write in title Solved!
That would help newer members having. Similar problems!
Also people should look at thread date before giving away valuable suggestions (sarcasm intended) !
Sent from my MT11i using xda premium
Can any1 plz help me out with my
problem, I have an iball Andi 4.5z
jelly bean
4.2.2 OS with root access but my
phone is not rebooting after
installing font installer. I even can't
remount system directory to read/
write in command prompt. I've
browsed many forums for the
solution but can't find any and the
ADB command line given in other
forums is not working so plz help. I dn't have a CWM backup. I cn't find firmware
for my device so a link for my device firmware and the steps to flash my device will be very helpful. Solutions needed urgently. Thank
you
Supong1991 said:
Can any1 plz help me out with my
problem, I have an iball Andi 4.5z
jelly bean
4.2.2 OS with root access but my
phone is not rebooting after
installing font installer. I even can't
remount system directory to read/
write in command prompt. I've
browsed many forums for the
solution but can't find any and the
ADB command line given in other
forums is not working so plz help. I dn't have a CWM backup. I cn't find firmware
for my device so a link for my device firmware and the steps to flash my device will be very helpful. Solutions needed urgently. Thank
you
Click to expand...
Click to collapse
First of all this is Neo V forum. Link to stock firmware might exist on your device forum. U need to reflash it to boot ur device. Ask in appropriate forum to gain proper help and solution to ur help. Thanks
Sent from my Xperia Neo V using Tapatalk
My i ball andi 4.5z mobile
Can't root give an idea to use root file plz.....................
Sent from my Andi 4.5z using XDA Free mobile app
Download 'framaroot' from playstore and after installing, run the app and select 'Boromir' exploit. 101% guaranteed since i rooted my Iball Andi 4.5z with framaroot.
---------- Post added at 08:09 PM ---------- Previous post was at 08:03 PM ----------
Download 'framaroot' from playstore
and after installing, run the app and
select 'Boromir' exploit. 101%
guaranteed since i rooted my Iball
Andi 4.5z with framaroot.
hi
i have recently upgrade my SGS2 GT9100I device to ics 4.0.4 official
kernel version 3.0.15 i9100xwlpt-cl941023 [email protected]#3
build number iMM76d.xwlpt
my device does not have root /cwm/su
i would like to root my device.
i have searched the web and also hare, i sow that the solution if to false cf-root.
but i cant find cf root that match my kernel.
can any one help me please, by link to cf root for this kernel. or other way to root my device??
Thanks in advance
tipsy pumpkin
Don't bother with CF-Root and use method 1 from guide in my signature.
Odoslané z GT-I9100 cez Tapatalk 2
Stileth said:
Don't bother with CF-Root and use method 1 from guide in my signature.
Odoslané z GT-I9100 cez Tapatalk 2
Click to expand...
Click to collapse
hi tnx a lot on answer
i have a problem, i followed your guide it is look like i have su and root on my device .
i also downloaded the "root check basic " from the play store and it wrote that my device is rooted.
i am treeing to use apex lancer but when i treeing to use one of the weights i get this massage
" due to limitations of the androind framework you cannot add widgets from the drawer without root access.
if super user is available on your device , please enable root helper from advanced settings and try again. you may also remove the widgets tab from drawer settings"
the root checker mark my device as rooted device . but the lancer dose not work. did i do something wrong?
what souled i do ??
please help me .......
Then flash Siyah/Dorimanx/Fluxi/Dream [...] kernel.
przemcio510 said:
Then flash Siyah/Dorimanx/Fluxi/Dream [...] kernel.
Click to expand...
Click to collapse
He's not using standard i9100. It will brick his phone!
@OP go to apex settings-advanced-root helper.
You're welcome.
Sent from my Galaxy S2 GT i9100
boki9999 said:
He's not using standard i9100. It will brick his phone!
Click to expand...
Click to collapse
He has normal i9100.
"kernel version: i9100xwlpt[...]"
---------- Post added at 05:56 PM ---------- Previous post was at 05:54 PM ----------
If you don't know, versions of S2 are:
international i9100
G, M, P, T.
"I" version does not exist.
tipsypumpkin said:
hi tnx a lot on answer
i have a problem, i followed your guide it is look like i have su and root on my device .
i also downloaded the "root check basic " from the play store and it wrote that my device is rooted.
i am treeing to use apex lancer but when i treeing to use one of the weights i get this massage
" due to limitations of the androind framework you cannot add widgets from the drawer without root access.
if super user is available on your device , please enable root helper from advanced settings and try again. you may also remove the widgets tab from drawer settings"
the root checker mark my device as rooted device . but the lancer dose not work. did i do something wrong?
what souled i do ??
please help me .......
Click to expand...
Click to collapse
Have you tried pushing it to "system/app" with permissions "rw--r--r" (octal 0664)?
Hello people,
I bought Lenovo s850, rooted, few days ago and now I have a problem. I had uninstalled some programs that comes with system that were irritating and now after I rebooted the phone there is a message SECURITY PROBLEM. What should I do to solve that?? Its a KitKat 4.4.2, VIBEUI 2.0.
THANK YOU
@neznalica
I have the same phone got it 2 days ago, but you mentioned that your phone is rooted, could you please post the link for rooting the Lenovo s850?
Once I can root it I will try to port CM to it, but I need to root it first.
Thanks.
supersonictt said:
@neznalica
I have the same phone got it 2 days ago, but you mentioned that your phone is rooted, could you please post the link for rooting the Lenovo s850?
Once I can root it I will try to port CM to it, but I need to root it first.
Thanks.
Click to expand...
Click to collapse
I got it rooted, so I dont have any links and any programs for rooting. If you found out something please post here how to solve the problem.
neznalica said:
I got it rooted, so I dont have any links and any programs for rooting. If you found out something please post here how to solve the problem.
Click to expand...
Click to collapse
i try to root ...until now still cant {in hand 2 week } ...what software u use to root ..
and ,r u sure ready root ??? cos , mine1 also got root apk inside phone , but nothing to do
Mine came pre rooted too. I have same problem after uninstalling a few system apps.
---------- Post added at 07:10 PM ---------- Previous post was at 06:23 PM ----------
There are 2 roms on needrom.com but the older one just causes a constant boot loop. The other one needs installing via cwm but I cant find any info on installing it. Anyone else seen any info?
Can anyone who has the s850 from china do a rom dump to needrom? My original rom was vibeui_v9.5_9422_3_st_s850 but now I have wrong version from lenovo forums.ru which removed imei's and messed with partitions and radios.
Solution for Lenovo S850 Security Problem
download & install
Code:
tinyurl.com/l7m9nhn
- it is working for me
not active link
Hello!
If anybody has that stuff what helped (in the link above), could you please post it again, with a working link. I have the same problem, but the link doesn't work.
Thank you
Solution to "security problem" watermark on screen with android logo on superior corner.
I have a s60w and deleted secureit app
For remove message you must to edit /system/build.prop and add the one line
ro.lenovo.check_safeapp=0
There is oen app in play store to edit that file, phone must be rooted
it works!
serpega said:
Solution to "security problem" watermark on screen with android logo on superior corner.
I have a s60w and deleted secureit app
For remove message you must to edit /system/build.prop and add the one line
ro.lenovo.check_safeapp=0
There is oen app in play store to edit that file, phone must be rooted
Click to expand...
Click to collapse
This really work to remove the watermark on my phone. Kudos! :good:
yazriff said:
This really work to remove the watermark on my phone. Kudos! :good:
How you do that..can you explained because I got same problem in my phone. I have try to edit build prop but it doesn't work..
Click to expand...
Click to collapse
matyiee said:
yazriff said:
This really work to remove the watermark on my phone. Kudos! :good:
How you do that..can you explained because I got same problem in my phone. I have try to edit build prop but it doesn't work..
Click to expand...
Click to collapse
You just need to copy and paste below line into the build prop
ro.lenovo.check_safeapp=0
After this, save build prop and reboot your phone.
Click to expand...
Click to collapse
i have follow the guideline you given but when i try to save it shows "error to save build prop"...why it be like that..?
matyiee said:
i have follow the guideline you given but when i try to save it shows "error to save build prop"...why it be like that..?
Click to expand...
Click to collapse
Have you rooted your device?
I edited build prop via es file explorer. My es file explorer have root access enabled.
serpega said:
Solution to "security problem" watermark on screen with android logo on superior corner.
I have a s60w and deleted secureit app
For remove message you must to edit /system/build.prop and add the one line
ro.lenovo.check_safeapp=0
There is oen app in play store to edit that file, phone must be rooted
Click to expand...
Click to collapse
Hi, would you mind telling me how exactly to do that? I have just downloaded Build prop editor but I have never used it before and I am a little bit scared that I'll make everything even worse.
Concretely - should I just copy this line wherever in column of /system/build.prop? Doesn't matter where?
Your answer would help me so much.
Lenovo s60-w
serpega said:
Solution to "security problem" watermark on screen with android logo on superior corner.
I have a s60w and deleted secureit app
For remove message you must to edit /system/build.prop and add the one line
ro.lenovo.check_safeapp=0
There is oen app in play store to edit that file, phone must be rooted
Click to expand...
Click to collapse
Didn't work .What can I do?
Can i use this method on lenovo s90 sisley?
Q&A for Lolipop 5.0 | Rooting | Recoveries | Micromax Unite 2 [Stock Rom]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Lolipop 5.0 | Rooting | Recoveries | Micromax Unite 2 [Stock Rom]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Dpi changer links not working bro
Thanks and Kudos, it works perfect on my device.
Right now I have Philz recovery installed, But I am used to TWRP, how can I change to that??
And is there any way to change stock icons to Original Lollipop??
---------- Post added at 07:35 AM ---------- Previous post was at 07:14 AM ----------
On clicking Reboot in Power options just shut downs phone, and I need to manually switch it on again. Please help me fix it...
DPI changer!
Sorry bro but the links for the dpi changer is not working. Please fix!
Not only Dpi changer, Real Lollipop Bootlogo, Bootanimation & Bootsound link also not working. Please update link bro.
And that flashing "SD card write enabler" didn't work too.
Apps are still installed in internal memory!
pragmatiste said:
Dpi changer links not working bro
Click to expand...
Click to collapse
Anurag_K said:
Sorry bro but the links for the dpi changer is not working. Please fix!
Click to expand...
Click to collapse
Harikrish44 said:
Not only Dpi changer, Real Lollipop Bootlogo, Bootanimation & Bootsound link also not working. Please update link bro.
Click to expand...
Click to collapse
Anurag_K said:
And that flashing "SD card write enabler" didn't work too.
Apps are still installed in internal memory!
Click to expand...
Click to collapse
I will take a look.
Sent from my Micromax A106 using XDA Premium 4 mobile app
---------- Post added at 05:13 PM ---------- Previous post was at 05:12 PM ----------
Harikrish44 said:
Thanks and Kudos, it works perfect on my device.
Right now I have Philz recovery installed, But I am used to TWRP, how can I change to that??
And is there any way to change stock icons to Original Lollipop??
---------- Post added at 07:35 AM ---------- Previous post was at 07:14 AM ----------
On clicking Reboot in Power options just shut downs phone, and I need to manually switch it on again. Please help me fix it...
Click to expand...
Click to collapse
I will try to find a way to change the icons. And the "reboot" option doesn't works. Its a bug. Forgot to mention.
Sent from my Micromax A106 using XDA Premium 4 mobile app
Ya apps will install in internal but when we download anything from browser it download's in external sd card.
help me if you can. thanks in advance
Hi there.
I am a newbie here. So I am sorry for posting like this. Can somebody please tell me how to root my new phone 'Micromax Canvas Fire 4'. Exact details and rooting file links will be good. My Emil address is now '[email protected]'
Thanks in advance.
Sorry For being Noob, But why do we need to unlock boot loader?? What does it serve?
And One more thing, to flash Lollipop Boot (Logo + Animation + Sound) , we just need to flash it through custom recovery after rooting or any other way???
Please help, And Please find a way to remove that reboot bug also. Thank you again
My sim can use internet but cant recieve call or sms but my network coverage is full then also no sms no call cumin so i m not able to log in whatsapp hike etc due to verification code not cumin
More Bugs
1) Contacts crashes, and force stops.
2) At times, the recent apps loops, so while in an app and going back takes to last app and pressing back again brings the first app again and so on, like in a loop.
3) I already mentioned about Reboot.
Please find a solution bro.
plzzz help meee
when i update the auto-rotate not working any more
help plz :/ sorry for my bad englich
Need help....
Thanks . But need help ... when i connect my phone to pc it connected as MTP device and when m trying to delete some file from card with pc it showing error (the device has either stopped responding or has been disconnected.) Please give me solution.
is it possible without stockrom
Bro is it possible to flash this firmware update with any other eom EU ning 5.0 ??
I can't recognize my unite 2 in sp flash tool
I Did what instructed in video but sp flash tools doesn't detect my device , can u fix this
Damodhar Bandla said:
I Did what instructed in video but sp flash tools doesn't detect my device , can u fix this
Click to expand...
Click to collapse
There's one way. Google the way to install preloader driver for mtk devices. Hope this will solve your problem. It worked in my case. :thumbup:
If using a custom rom (Dark L v1.6 by Umang Leekha), with repartitioned memory, is it possible to flash Lollipop directly using SP flash tools?
If not, then what to do?
androidghoul said:
If using a custom rom (Dark L v1.6 by Umang Leekha), with repartitioned memory, is it possible to flash Lollipop directly using SP flash tools?
If not, then what to do?
Click to expand...
Click to collapse
Yes it is possible. Just flash and enjoy!
Hi XDA's
I got a new Set top Box model EC6108V8 and I'm trying to Root this device to install GAPPS. Searching for solution bring me nowhere because this STB ROM is already updated by Vendor of TM UniFi.
Today, I found this recovery img inside /system folder and I wonder if anyone can port this recovery img to CWM @twrp or maybe can add the "INSTALL UPDATE" menu back into it, as it was removed by TM in last update. To flash this img is by using "write_raw" command.
I'm not really sure if this img is port-able. However, it is worth a try by Pro Porter out there. :highfive:
Appreciated any feedback and help
I know this is another question, but are you able to root your STB? I failed to root mine using King Root.
chanhensem
360root can root
---------- Post added at 07:38 AM ---------- Previous post was at 07:35 AM ----------
chanhensem said:
I know this is another question, but are you able to root your STB? I failed to root mine using King Root.
Click to expand...
Click to collapse
360root can root
chanhensem said:
I know this is another question, but are you able to root your STB? I failed to root mine using King Root.
Click to expand...
Click to collapse
Hi,
No I am not.
But fortunately, there was some other tricks to install APK files like Youtube, Chrome etc. But I just get struggled to include GAPPS core apps into this STB. Installing Play Services Apk & Play Store manually seems incompleted
teck7677 said:
360root can root
---------- Post added at 07:38 AM ---------- Previous post was at 07:35 AM ----------
360root can root
Click to expand...
Click to collapse
360root?? never heard that rooting app before, instead, I know about 360security LOL
RidzVarn said:
Hi,
No I am not.
But fortunately, there was some other tricks to install APK files like Youtube, Chrome etc. But I just get struggled to include GAPPS core apps into this STB. Installing Play Services Apk & Play Store manually seems incompleted
Click to expand...
Click to collapse
Pls guide other tricks to install apk on the latest updated version of hypptv app... Tried so many times and stuck with unknown source locked...
Boteboyz said:
Pls guide other tricks to install apk on the latest updated version of hypptv app... Tried so many times and stuck with unknown source locked...
Click to expand...
Click to collapse
Hi ..
I dont know which version of android ur STB currently using, and I also in doubt for the tricks, maybe its not working for latest udpated version due to security reason.
And also, since there are lots of AndroidBox Tv in market, people are not looking for 'STB hack' anymore