Related
how's it going guys.
My Fascinate sometimes pops up with a blue/red screen saying that an update is available. Every time when I confirm it, it reboots but says it can't be completed because of an error or something. I rooted the phone, installed ClockworkMod and that's it. Erased all the unnecessary stock apps that comes with the phone. What's the problem?
You erased all the stock apps.
You have CWM.
Sent from my SCH-I500 using XDA App
Kevin Gossett said:
You erased all the stock apps.
You have CWM.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
ah! ok ok. now will this be a problem still if I decide to update the firmware manually?
you can update to froyo with cwm by flashing a rom
Sent from my SCH-I500 using XDA Premium App
akanightmare said:
ah! ok ok. now will this be a problem still if I decide to update the firmware manually?
Click to expand...
Click to collapse
yes I believe if you are running a rooted rom you cannot receive OTA updates.. however you can still do what was mentioned in the last post and use odin to put froyo on yourself, there's even debloated/deodexed packages so you don't have to do much work removing anything, but of course most of them will root your phone so still no OTA updates
tapatalked from my GINGERBANGED Fascinate
Hey guys today i flshed the jellybean alpha with jellybean gapps now i wanted to install apps,but everytime when the app is going to be installed there comes a message: cant install on sd Card
Did anyone face the same problem?and how to fix that?
Sent from my mango using xda app-developers app
KhemaraS. said:
Hey guys today i flshed the jellybean alpha with jellybean gapps now i wanted to install apps,but everytime when the app is going to be installed there comes a message: cant install on sd Card
Did anyone face the same problem?and how to fix that?
Sent from my mango using xda app-developers app
Click to expand...
Click to collapse
I just installed gapps on the JB beta 1 by kamarush and everything went smooth.Google now is awesome!
http://d-h.st/ylq
Try flashing this gapps right after you flash the ROM. (don't boot after flashing the ROM. Just flash gapps after it says installation complete.)
Kushsolitary said:
I just installed gapps on the JB beta 1 by kamarush and everything went smooth.Google now is awesome!
http://d-h.st/ylq
Try flashing this gapps right after you flash the ROM. (don't boot after flashing the ROM. Just flash gapps after it says installation complete.)
Click to expand...
Click to collapse
Sorry it doesnt worked for me still the same error
Sent from my SK17i using xda app-developers app
Hi!!
I'm new to this world of roms and roots, and after installing Crdroid v12.0 a week ago, the new version 13.0 has just been released.
I just wanted to update the Crdroid ROM from v12.0 to v13.0. Could anyone help me do this? How do I need to do this? What are the neccessary steps, and does it mean i will lose all the data on my phone?
Thank you!!
Just flash it over your the older version. No need to do data wipe.
Isn't there a section in the Crdroid rom thread that tells these things?
Sent from my GT-I9300 using xda premium
UrbanDrawer said:
Just flash it over your the older version. No need to do data wipe.
Isn't there a section in the Crdroid rom thread that tells these things?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks!! and yeah, I read over 100 pages but it was mostly bugs and stuff to do with the rom....couldn't find anything, and, if you don't mind me asking, how do you flash it? :/ i know im being a noob,
thanks again!!
renikum said:
How do you flash it? :/
Click to expand...
Click to collapse
You boot into Clockworkmod and choose install zip from sd-card. A directory opens, choose the rom to flash.
Now, because the rom has aroma options, you have to choose the things you want and don't want to install.
Btw there's a Thanks button.
Sent from my GT-I9300 using xda premium
UrbanDrawer said:
You boot into Clockworkmod and choose install zip from sd-card. A directory opens, choose the rom to flash.
Now, because the rom has aroma options, you have to choose the things you want and don't want to install.
Btw there's a Thanks button.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
THANKS! hahaha (i've also thanked you the other way! )
Hi guys
I've tried installing many version of Gapps on my S3 inc. minimal version.
I clear the 3 catchs each time, but the Gapps dont appear.
I've tried on slimbean, PAC and PA roms but the same happens on each one
Its driving me crazy as this is a new phone and want to start using it
What am I doing wrong?
cramhead said:
Hi guys
I've tried installing many version of Gapps on my S3 inc. minimal version.
I clear the 3 catchs each time, but the Gapps dont appear.
I've tried on slimbean, PAC and PA roms but the same happens on each one
Its driving me crazy as this is a new phone and want to start using it
What am I doing wrong?
Click to expand...
Click to collapse
Are u sure you are using the right provided gaaps?
Whats your phone model exactly?
Sent from my GT-I9300 using xda premium
Its a GT-I9300
and for example I use http://forum.xda-developers.com/showthread.php?t=1933804 for the rom and gapps
Ver3go said:
Are u sure you are using the right provided gaaps?
Whats your phone model exactly?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
and what is this S3 inc. minimal version you are using? is it a stock rom or a custom rom?
Sent from my GT-I9300 using xda app-developers app
cramhead said:
Its a GT-I9300
and for example I use http://forum.xda-developers.com/showthread.php?t=1933804 for the rom and gapps
Click to expand...
Click to collapse
That's an HTC Desire ROM!!!
Yeah I noticed that RASH error as well. That was just a quick google search I used for an example.
I'm not that stupid
krs360 said:
That's an HTC Desire ROM!!!
Click to expand...
Click to collapse
custom rom
just now I tried to flash
with gapps-jb-20130301-signed.zip
cleared catchs. Nothing
what rom are you currently using? based on CM? do you have CWM recovery pre-installed??
Sent from my GT-I9300 using xda app-developers app
My BB is i9300XXEMC2
I'm trying to get PACman rom to work and flashing with CMW
currently downloading cyanogenmod to see if that works
sriram231092 said:
what rom are you currently using? based on CM? do you have CWM recovery pre-installed??
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
boot into CWM recovery. wipe data, cache and dalvik cache. apply zip from sdcard. choose zip and installing..then again choose zip from sdcard and select gapps.zip. is this the procedure you are following? I do the same everytime and faced no problems till now. you ahould have the gapps.zip of the respective rom you flash prior to it.
Sent from my GT-I9300 using xda app-developers app
what recovery?
Thats exactly what I've been doing!
I've just tried cm-10.1-20130522-NIGHTLY-i9300.zip
with CM 10.1 Gapps
booted into CWR
cleared the 3 catches
installed CM10.1
install Gapps
cleared 3 catchs again
....zero Gapps
sriram231092 said:
boot into CWM recovery. wipe data, cache and dalvik cache. apply zip from sdcard. choose zip and installing..then again choose zip from sdcard and select gapps.zip. is this the procedure you are following? I do the same everytime and faced no problems till now. you ahould have the gapps.zip of the respective rom you flash prior to it.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
after flashing rom, just flash gapps and there's no need to wipe anything before or after flashing gapps. just reboot.
Sent from my GT-I9300 using xda app-developers app
I always try both....I'm that desperate now
CMW is 5.5.0.4
Just tried RC1 and install fails
going to try a nightly
sriram231092 said:
after flashing rom, just flash gapps and there's no need to wipe anything before or after flashing gapps. just reboot.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
flash the latest touch version of CWM and you should be good to go.
Sent from my GT-I9300 using xda app-developers app
Thanks. I'm booting into cwr and installing cwm-touch-6.0.3.1-d2tmo.zip
I then go to advance and reboot recovery but im still on 5.5
sorry for the n00b like manor
that is a .tar file buddy. You can't flash it thriugh recovery. you have to put your mobile into download mode , connect to pc via uab. start desktop odin, select pda and then CWMtouch.tar file and hit start. then once you see the pass, it is done.
Sent from my GT-I9300 using xda app-developers app
you sure you got the recovery for the i9300?
found this
will give it a shot
Glebun said:
you sure you got the recovery for the i9300?
Click to expand...
Click to collapse
yes. flashing the wrong recovery kills the phone
I have taken the e975 international Optimus G official rom by avatar and ported it to our AT&T E970 until they make an official build for us. this rom is pretty bad. the theme options are much like Miui and they have many great features built into it.
Go to their website for the full low down on the rom and to request new features and themes and if you are a themer please make some of your themes available on their format.
Avatar Rom
I'll add the full details later tonight i'm in a rush for a BBQ and cold beer this afternoon but saw the avatar admin said i could post this port up and wanted to get it out to you all
I used our CM10.1 as a base so its using the cm10.1 kernel and any other kernel that ran on it should run on this but i have not tested it yet so beware and make backups
I used BANKS Gapps and have had no problem yet.
*****Known Issues****
- jb calling bug
- on initial install the external SD isn't recognized (I used the SD card fix from when codefire and others didn;t see the sd either. the link is below and i'm working on a permanent fix this week
-a few of the about phone/rom info is wrong. i'm also fixing this later this week
**Install Instructions**
1) Download the rom, gapps, and SD card fix from below and place them at the root of your SD card
2) Boot into CW and make a nandroid. i also recomened using Titanium to backup your apps
3) Wipe dalvik cache, system and do a full data wipe as well
4) Select Install zip and choose the rom file
5) Install Gapps if you wish
6) Install the SD card fix
7) Reboot into the ROM and let it boot up
8) boot into CW and restore your data if you so desire.
-------Downloads----------
Avatar 2.12b
Banks GAPPS
SD Card Fix - thanks HMkX2
Thanks for the effort, brother! Much appreciated. Have a few cold ones for me at the bbq! :beer::thumbup:
Sent from my Optimus G using xda app-developers app
Thanks for keeping the O.G. OG ROM scene kicking!
I'm about due to try another ROM this week....
Awesome! Gonna try now!
Sent from my LG-E970 using xda premium
looks unique to me! I'll be trying this out over the next few days. Will report back with battery life and so forth. Anyone able to try out our kernels to see if any of them are compatible?
OMG I've Been Waiting For This ROM Ever Since I Stumbled Upon On The e975 Forums. Thanks!!
OK which file do u flash to fix ext SD card there are like 5 files on that Link... All or a certain one..... Thanks in advance
Sent from my LG-E970 using xda app-developers app
Google restore
After flashing this it doesn't give me the option to restore from Google during the setup wizard. All the other ROMs do.
86nymets said:
After flashing this it doesn't give me the option to restore from Google during the setup wizard. All the other ROMs do.
Click to expand...
Click to collapse
Did u install gapps?
Sent from my Optimus G using xda app-developers app
Couldn't get exsd to show up installed fix....?
Sent from my LG-E970 using xda app-developers app
86nymets said:
After flashing this it doesn't give me the option to restore from Google during the setup wizard. All the other ROMs do.
Click to expand...
Click to collapse
I've seen this happen on ROMs before. Don't remember which one, but I have seen it. May be from my n4 conversion days...
Sent from my Nexus G using Tapatalk 2
Do you need to have the ota jb update to flash this ROM?
gerg6986 said:
Do you need to have the ota jb update to flash this ROM?
Click to expand...
Click to collapse
yes
icytrey said:
Did u install gapps?
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
Yes I did.
I can't seem to get SD to work . . . ? Anyone have any directions on how to do this? There are different files and methods it seems
I ditto the fellow above me here. I have tried to follow that guide and I can see my SD card in file manager. But in system > storage there is only internal recognised. No option for SD/external/added memory. Kinda want to see my giant gallery from my 64gb/32gb cards.
Sent from my LG-E970 using xda app-developers app
This sounds wonderful, will try this weekend
Sent from my LG-E970 using xda premium
what happened? Anything new on this rom? Really liked a lot of the features, but need the bugs ironed out. Not upset, just checking in is all
Just messed around with this rom on my Galaxy S 2 and I gotta say . . . I would LOVE to get this up an running. Here's hoping you keep up the fixes.
Any plans on updating to newest version of the rom? Or is this one dead?
Sent from my Galaxy Nexus using xda premium