Hi Guys i am new to Droid...
I am from india bought a Verizon Droid Razr maxx with .211 version.
I flashed jellybean official update.
I tried to go back to ICS
but phone got bricked in beween flashing with Moto RSD lite( "Cant flash boot.img").
Please i need your help ..
Expecting soltuions from Valuable XDA members...
You can't go back I think.
I'm not too familiar with the GSM Maxx, so I may be wrong.
-Sent from Marino's Razr Maxx-
From JB to ICS back and forth
anuglx said:
Hi Guys i am new to Droid...
I am from india bought a Verizon Droid Razr maxx with .211 version.
I flashed jellybean official update.
I tried to go back to ICS
but phone got bricked in beween flashing with Moto RSD lite( "Cant flash boot.img").
Please i need your help ..
Expecting soltuions from Valuable XDA members...
Click to expand...
Click to collapse
I have an EU Droid Razr Maxx, originally was ICS 4.0.4 then I erased my CID and installed Verizon JB Leak, erased it and installed China JB sbf using RSD Lite re-flashed my CID and flashed my EU ICS again.
please read Droid Razr Development section in XDAdevelopers you'll understand what to do, don't worry it's solved.
Please help
kkhadr said:
I have an EU Droid Razr Maxx, originally was ICS 4.0.4 then I erased my CID and installed Verizon JB Leak, erased it and installed China JB sbf using RSD Lite re-flashed my CID and flashed my EU ICS again.
Invalid Flash Mode Boot Failure
0A.74
Device is Locked, Status Code: 0
Battery Low
Cannot Program
Transfer Mode:
USB Connected
Invalid CC OTV CG: Webtop Invalid SP DATA
Invalid CG HAB CG: Webtop, status 0X004E
Invalid CG OTV CG: system
What to do Now? How can i Charge? I tried to plug in for omre than 3 hours.
Please i dont want to open the seal .. is there is another solution?
Click to expand...
Click to collapse
Seems like your webtop partition is gone. If you want to go back to ICS you need to download a GB firmware, extract the webtop_signed and flash with this:
http://www.mediafire.com/download.php?qibcf1inyb7ao8y
Then flash a FULL ICS firmware using RSD.
Flashing an ICS Kernel from RSD Lite is your best bet.
And in the future, don't update to JB if you continue to want to mess with ROMS and rooting. If you want to continue this, don't update to JB.
Related
Hi,
i have Fido Motorola Razr Droid.
i have installed root and Clockwork on it and works fine,
how can i dientify which fastboot file i have to flash to unlock my bootloader? where is the fast boot version marked? under about?
my plan is to get the retail EU version then upgrade to the european ICS.
can anyone advise what is the procedure to take change my phone firmware from Fido to the Retail EN version then upgrade to ICS?
Thanks
1. there is no unlocked bootloaders for the razr... so you cant flash anything to get it -_-
2. i believe w.e u do the EU version doesnt flash on any of the canadian razr because of the signature checks... for now we wait until a custom arctic comes out
i was impatient and flashed the brazilian retail fasboot flash from the ethernity project , it flashed , when i tried to flash the europe retail it did not,
why brazil it accept while not european one?
So as you are telling me there is no way for u s Canadian to get the Retail european version?
the Brazilian retial Flash Worked on Fido Razr Xt910.
Thanks.
according to what ive tried ya... euro doesnt seem to work... the only one we can use is the brazilian... i just installed Arctic rom over that which helps make the phone a lot more stabler
Here is my Experience,
i installed Asia Rom on my Fido and it worked fine and for my languages and in the about screen it has all Asian Rom Stuff,
the way i did it via Clockwork recovery,
someone on the net put the asian Backup recovery ,
i download it and boot it in CWM and Voila i got it working, without using RSD, now if i brick it i know that i have to use RSD Lite and restore brazilian then do whatever i want.
Hey Guys I have A Droid Razr with Following
System Version :672.1880.352.xt910.rogers.en.ca
Revision Number :02
model xt910
android version 4.0.4
But I am using this phone in Asia (pakistan) , And dont want roggers stuff in my phone..plus my phone battery doesn't even last a day :silly:
Should i upgrade to an Asian build of the stock ROM ? leaked jelly beans? i cant seem to understand this droid stuff though im familiar with flashing on other devices plx guide ..thank you
fast boot enabled ? i don't want to brick my device ...i thought it was better to ask then try :angel:
max414 said:
Hey Guys I have A Droid Razr with Following
System Version :672.1880.352.xt910.rogers.en.ca
Revision Number :02
model xt910
android version 4.0.4
But I am using this phone in Asia (pakistan) , And dont want roggers stuff in my phone..plus my phone battery doesn't even last a day :silly:
Should i upgrade to an Asian build of the stock ROM ? leaked jelly beans? i cant seem to understand this droid stuff though im familiar with flashing on other devices plx guide ..thank you
fast boot enabled ? i don't want to brick my device ...i thought it was better to ask then try :angel:
Click to expand...
Click to collapse
As ya saying ya razr system version is from Canada (rogers.en.cn) , most probably ya can't flash Asian version fastboot on it unless ya don't erase ya cid .
Motorola had locked the bootloader to downgrade or flashing different region fastboot .
Ya can even use rogers.cn fastboot files in Pakistan without any issues .
Just look out for the appropriate fastboot files and flash in forum , remember once ya upgrade there is no way to go back yo ics.
Hit the thx button if i helped ya in anyways
max414 said:
Hey Guys I have A Droid Razr with Following
System Version :672.1880.352.xt910.rogers.en.ca
Revision Number :02
model xt910
android version 4.0.4
But I am using this phone in Asia (pakistan) , And dont want roggers stuff in my phone..plus my phone battery doesn't even last a day :silly:
Should i upgrade to an Asian build of the stock ROM ? leaked jelly beans? i cant seem to understand this droid stuff though im familiar with flashing on other devices plx guide ..thank you
fast boot enabled ? i don't want to brick my device ...i thought it was better to ask then try :angel:
Click to expand...
Click to collapse
the only firmwares that will work on that phones are Rogers and LATAM (Latin America) fastboot files. can't use asian, EU, or american (they're not even GSM).
if you simply want to get rid of Rogers stuff, you can:
1. root, install Titanium Backup, remove the bloatware, change the boot animation.
2. flash LATAM generic firmware. find them in RAZR development forums.
just remember, once you go JB, you can't go back to ICS.
R3dbeaver said:
the only firmwares that will work on that phones are Rogers and LATAM (Latin America) fastboot files. can't use asian, EU, or american (they're not even GSM).
if you simply want to get rid of Rogers stuff, you can:
1. root, install Titanium Backup, remove the bloatware, change the boot animation.
2. flash LATAM generic firmware. find them in RAZR development forums.
just remember, once you go JB, you can't go back to ICS.
Click to expand...
Click to collapse
Only Latam ? where do i find this latam firmware , i don't wish to upgrade to JB , ics is ok for me..i just need the max battery :cyclops:
and brief description or any guide that i can follow?
is root now available on jb ?
latam includes rogers or fido?
there is no generic firmware for xt910?
max414 said:
Only Latam ? where do i find this latam firmware , i don't wish to upgrade to JB , ics is ok for me..i just need the max battery :cyclops:
and brief description or any guide that i can follow?
is root now available on jb ?
latam includes rogers or fido?
there is no generic firmware for xt910?
Click to expand...
Click to collapse
yes, only LATAM as far as i know. u can try different ones, like EU or Asia, but u gotta tweak the file abit (stuff about changing CID or something).
XT910's firmwares: http://sbf.droid-developers.org/umts_spyder/list.php
but again, check out RAZR"s development forum (this is RAZR QA forum) for updated list.
find LATAM Retail and they're mostly ICS (if not all). the JB ones are posted in the sticky in the RAZR Dev forum.
guide: google "RAZR xt910 fastboot". super easy. use RSD Lite.
Root on JB: yes, but through Linux only.
LATAM is LATAM. Rogers is Rogers. Fido is Fido. wth is your question supposed to mean? LOL - if you flash your Rogers phone with LATAM, it will be identical as if you buy that phone in, say, Argentina....
there's no "generic". there is a DEV firmware out there, but its untested for XT910 and not recommended. LATAM retail is as generic as you can get.
also, my Rogers JB now has better battery than Rogers ICS or CM10.1. only D-Trail's D-Wiz ICS can beat it. it just takes a while in JB for the phone to recognize your usage.
http://forum.xda-developers.com/showthread.php?t=1835775
Look out into this thread it is super thread of ics firmwares .i hope it would work on ya
Thx
Hit the thx button if i helped ya in anyways
okay , so as far i get it its like ...on my rogers latam phone
1.I erase my cid
2.flash Fast Boot of Any retail Ics eg retail uk ics
3. root ics using easy root ics
4.preserve root via voodo root keeper
5.temporary loose root and update to jb via ota
6. restore root via voodo root keeper??
7. restore my cid back
thats it ????
max414 said:
okay , so as far i get it its like ...on my rogers latam phone
1.I erase my cid
2.flash Fast Boot of Any retail Ics eg retail uk ics
3. root ics using easy root ics
4.preserve root via voodo root keeper
5.temporary loose root and update to jb via ota
6. restore root via voodo root keeper??
7. restore my cid back
thats it ????
Click to expand...
Click to collapse
Lolz !!! Ya still in ballin
Ok ya on Rogers latam then download Rogers latam fastboot( i believe that is first fastboot) from the link i attached on my last post. Just flash that using rsd lite . Ya do not have to through all the long way and all the update craps .
Root using this link
http://forum.xda-developers.com/showthread.php?t=2257137
Note : fastboots are OEM and full too.!!
Edit : Do not need of erasing CID.
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
My device - xt910 umts spyder
A few days back i flashed .au firmware on my mobile to get android 4.1.2 earlier i was on asiaretail android 4.0.4
but not i get many problems with it due, sometimes imei gets missing n **** .
i want to get back into my orignal firmware
Upon trying to flash back asiaretail i get signature error" failed flashing process.6/19 flash cdt.bin_signed phone returned fail"
which i think is because of either 2 reasons
1)my mobile is spyder_umts and firmware i m getting online r only spyder
2)I m trying to flast 4.0.4 on 4.1.2
kindly help me what to do ..
hey i am sorry for being noob, i messed my xt910
now i can only flash via RSDLIGHT, i dont have anything on my razr , its empty now
but i cant find ROM that can be flashed , as i understand i need stock ROM, previously there was a jelly bean, i have tried several versions, but i get an error in rsd-light
plz help me to find a stock rom that can be flashed, no one in Israel supports anymore motorola razr
i have xt910 european version, i have bought in Israel
talboris said:
hey i am sorry for being noob, i messed my xt910
now i can only flash via RSDLIGHT, i dont have anything on my razr , its empty now
but i cant find ROM that can be flashed , as i understand i need stock ROM, previously there was a jelly bean, i have tried several versions, but i get an error in rsd-light
plz help me to find a stock rom that can be flashed, no one in Israel supports anymore motorola razr
i have xt910 european version, i have bought in Israel
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3023837
Sent from my Razr XT910
I everyone.. ! First Sorry about my Eng.
- I have a phone motorola XT910.. after rooted (android 4.1.x) and try to update android Lippo CM13, I have a problem with boot..
My phone can't completed boot, Die android allway show after Motorola loading.. How I can reinstall my phone, I have spend more time to research google, but any room 4.0.4 link download is DIED. my fastboot ver 0A.6C
Thank's any tip...
thien321901 said:
I everyone.. ! First Sorry about my Eng.
- I have a phone motorola XT910.. after rooted (android 4.1.x) and try to update android Lippo CM13, I have a problem with boot..
My phone can't completed boot, Die android allway show after Motorola loading.. How I can reinstall my phone, I have spend more time to research google, but any room 4.0.4 link download is DIED. my fastboot ver 0A.6C
Thank's any tip...
Click to expand...
Click to collapse
use RSD Lite to flash stock firmware
you need a firmware file that matches your carrier and region
firmware 's bootloader /ap fastboot version must be same or newer than version currently on the phone
links to firmware in the index
http://forum.xda-developers.com/showthread.php?t=3023837
[INDEX] Motorola Droid Razr Development (2015)
Sent from my Motorola XT1060 using XDA Labs