i flashed a wrong kernel and now my device doesn't start the led is red if i kept pressing power button and volume up it vibrates 3 times and i can connect in flashmode or fastboot what can i do please??
Since red led us present. Charge ur pobe. And flash with a stock kernel. Den if successful flash again the stock rom
Why u didnt mentioned the model??
If different kernel was of a novathor device... It wont hard brick (i xperienced that myself after flashing xp kernel on my xu)
Read this
http://forum.xda-developers.com/showthread.php?t=2023135
Plz PLZ PLZ DUN FLASH THE WRONG FTF OR U MAY LOOSE TOUCHSCREEN SENSITIVITY ENTIRELY
Flash only the ftf which is for ur phone
drsanket_xperia_u said:
Why u didnt mentioned the model??
If different kernel was of a novathor device... It wont hard brick (i xperienced that myself after flashing xp kernel on my xu)
Read this
http://forum.xda-developers.com/showthread.php?t=2023135
Plz PLZ PLZ DUN FLASH THE WRONG FTF OR U MAY LOOSE TOUCHSCREEN SENSITIVITY ENTIRELY
Flash only the ftf which is for ur phone
Click to expand...
Click to collapse
It happened to me today, I flashed SlimCM to see if it works with Sola(after some modifications)...it booted but no touch! Flashed CM9 - no touch. Flashed stock ICS- no touch. Fortunatelly, Gingerbread saved me once again
too late flashed wrong ftf my touch screen now doesn't work i'll try to flash gb i hope it works and i have unlocked boot loader so i will have to pay for repair
Try it, fixed my Sola.
Sent from my Xperia Sola using Tapatalk 2
ammarooooo said:
too late flashed wrong ftf my touch screen now doesn't work i'll try to flash gb i hope it works and i have unlocked boot loader so i will have to pay for repair
Click to expand...
Click to collapse
Did it work for you?
wrong ftf plss help
tadeas482 said:
Did it work for you?
Click to expand...
Click to collapse
hey guys i flashed st25's ftf instead of st27i's ftf now my phone won turn on plss help
no it didn't i took it to an expert and i'll tomorrow he will give me an answer
ammarooooo said:
too late flashed wrong ftf my touch screen now doesn't work i'll try to flash gb i hope it works and i have unlocked boot loader so i will have to pay for repair
Click to expand...
Click to collapse
Flash relock bootloader.ftf
Then flash stock rom ftf
U r back wid warranty
Dun pay anything.. Just act noob and say phone restarted and now my touchscreen aint working
drsanket_xperia_u said:
Flash relock bootloader.ftf
Then flash stock rom ftf
U r back wid warranty
Dun pay anything.. Just act noob and say phone restarted and now my touchscreen aint working
Click to expand...
Click to collapse
I wish it's like that i live in syria we don't have waranty and we don't have digitizers i have to get from another country
Xperia U ST25i wont start
Hi, I had Unofficial JB ported from Xperia go for my U... then I flashed Infinity ROM v3 which said not to do factory reset but i accidentally did it... now my phone wont start it goes into bootloop..... :crying: i can only access CWM recovery :crying: What to do now??? please help
Related
Hello everyone,
i have wt19i with JellySandwich 6.2.1 and rage kernel v3.2!i flashed earlier FOX XMP ICS rom and after that my touchscreen was not responding...in the screen where it says to write down the pin,i could only press the zero button and all the hardware keys work fine...!If anyone knows how to fix it please help.....
bekris56 said:
Hello everyone,
i have wt19i with JellySandwich 6.2.1 and rage kernel v3.2!i flashed earlier FOX XMP ICS rom and after that my touchscreen was not responding...in the screen where it says to write down the pin,i could only press the zero button and all the hardware keys work fine...!If anyone knows how to fix it please help.....
Click to expand...
Click to collapse
Did you unlock bootloader on official way or via testpoint?
Flash the stockrom and see what happens...
I think that was via testpoint..i dont know for sure because one of my friends did it...i searched all similar posts but i cant use flashtool!it stuck on screen that says to plug in my phone!
bekris56 said:
I think that was via testpoint..i dont know for sure because one of my friends did it...i searched all similar posts but i cant use flashtool!it stuck on screen that says to plug in my phone!
Click to expand...
Click to collapse
So you install the latest flashtool version. Afterwards you download the gingerbread (or ics) ftf for your device. You install all drivers from flashtool installation folder> drivers. Now you launch flashtool, click on the flash, select flashmode and choose the ftf. Now turn phone off, hold volume up and while holding plug in pc. Don't turn phone on, just connect while holding volume down. Flashtool will automaticly flash the ftf.
Just restart and see what happens
bekris56 said:
Hello everyone,
i have wt19i with JellySandwich 6.2.1 and rage kernel v3.2!i flashed earlier FOX XMP ICS rom and after that my touchscreen was not responding...in the screen where it says to write down the pin,i could only press the zero button and all the hardware keys work fine...!If anyone knows how to fix it please help.....
Click to expand...
Click to collapse
flashing another device rom to ur made this problem..bcz when u do it the the touch drivers are replaced screwing ur touch screen digitizer...
try flashing hybrom v16 GB of sk17i and flash to stock lww rom after that....
is it still dont work u have to replace ur touchscreen digitizer.
mihahn said:
So you install the latest flashtool version. Afterwards you download the gingerbread (or ics) ftf for your device. You install all drivers from flashtool installation folder> drivers. Now you launch flashtool, click on the flash, select flashmode and choose the ftf. Now turn phone off, hold volume up and while holding plug in pc. Don't turn phone on, just connect while holding volume down. Flashtool will automaticly flash the ftf.
Just restart and see what happens
Click to expand...
Click to collapse
I did it....still the same problem...!
bekris56 said:
I did it....still the same problem...!
Click to expand...
Click to collapse
So you stuck there, on the latest flashtool build. Reinstall it and try again, it must work!
mihahn said:
So you stuck there, on the latest flashtool build. Reinstall it and try again, it must work!
Click to expand...
Click to collapse
You mean to flash 2 times the same ftf?
Oh so you mean you have installed stock firmware and touch isn't working anyway? There are some threads about how to fix touchscreen with hybrom (like sandy7 said)
Sent from my SK17i running Jelly Bean via CM10
sandy7 said:
flashing another device rom to ur made this problem..bcz when u do it the the touch drivers are replaced screwing ur touch screen digitizer...
try flashing hybrom v16 GB of sk17i and flash to stock lww rom after that....
is it still dont work u have to replace ur touchscreen digitizer.
Click to expand...
Click to collapse
if you have a link for hybrom v16 i would be thankfull to you!!and one more question,i must flash hybrom and let the phone boot?or no?
Hello, I have done the same with these two roms and I have the same problem. I can not operate the touchscreen phone. Please cant you help me?
Sorry for my english. I am Spanish.
LLoSER said:
Hello, I have done the same with these two roms and I have the same problem. I can not operate the touchscreen phone. Please cant you help me?
Sorry for my english. I am Spanish.
Click to expand...
Click to collapse
How about flashing a custom kernel with cwm (flash again if you already have one) , remove memory card, don't try to boot into the Rom! Just boot into cwm wipe everything! (cache/dalvik/data/system/batterystats) literally wipe everything you could wipe . Then flash the generic firmware for your phone. I think that should do the trick.
hit thanks if I've helped!
sent from my smultron
gouthamthemostwanted said:
How about flashing a custom kernel with cwm (flash again if you already have one) , remove memory card, don't try to boot into the Rom! Just boot into cwm wipe everything! (cache/dalvik/data/system/batterystats) literally wipe everything you could wipe . Then flash the generic firmware for your phone. I think that should do the trick.
hit thanks if I've helped!
sent from my smultron
Click to expand...
Click to collapse
Hi, first thanks for your help.
But I've done what I mentioned twice and the touch screen is still not working. Can you think of any other solution?. thanks
bekris56 said:
if you have a link for hybrom v16 i would be thankfull to you!!and one more question,i must flash hybrom and let the phone boot?or no?
Click to expand...
Click to collapse
search xda for the tut how to solve ur problem....
and hybrom link u can find it here http://forum.xda-developers.com/showthread.php?t=1879666
Thank you all for helping but i just fix it!!!!
I followed the steps from this post http://forum.xda-developers.com/showthread.php?t=1773114 but i used rage kernel 2.7 and hybrom v12!not v10!!
bekris56 said:
Thank you all for helping but i just fix it!!!!
I followed the steps from this post http://forum.xda-developers.com/showthread.php?t=1773114 but i used rage kernel 2.7 and hybrom v12!not v10!!
Click to expand...
Click to collapse
Hello, I have the same problem as you with the mini st15i. Could you tell me all the steps to make it work?
Thanks in advance.
need help with my wt19i
i have the same problem too :crying: last night i've flashed wrong cusrom (should have known it for mini pro) but mine is wt19i and the touchscreen was never responding ever since. I've tried so many ways in i.e :
http://forum.xda-developers.com/showthread.php?t=1856334
http://forum.xda-developers.com/showthread.php?t=1927058
http://forum.xda-developers.com/showthread.php?t=1779023
http://forum.xda-developers.com/showthread.php?t=1721331
none worked for me. Not even partially . Been tried using rage kernel 2.6, 2.7, X-kernel, KrSH kernel. Hybrom v10, v12 minipro, v12 lww. but it just can't boot seems like i'm desperate right now. Do i have to keep flashing again and again? bcause i see some comments about just tried to keep flashing to their devices and sometime it could magically turn the touchscreen to work
Hybrom v12
bekris56 said:
Thank you all for helping but i just fix it!!!!
I followed the steps from this post http://forum.xda-developers.com/showthread.php?t=1773114 but i used rage kernel 2.7 and hybrom v12!not v10!!
Click to expand...
Click to collapse
I searched for hybrom v12 mini pro for about half an hour, if you know the right method and link kindly reply me asap and with full instructions. I am also Lww user and facing same touch screen issue.
I will appreciate your concern.
Thanks.
Help me with this method
https://forum.xda-developers.com/xperia-mini/help/tp-firmware-config-file-to-fix-t3704805
I properly flashed the FXP205CM9 kernel and rom, over a fresh 6.1.1.B.54 rom, booted, but touchscreen gone. I did the same procedure over 5 times now I'm confused.... Any help appreciated!
Flashed stock too, didn't help :'(
Did you flash wrong version? Sola = pepper
Sent from my ST27i
satan89 said:
Did you flash wrong version? Sola = pepper
Sent from my ST27i
Click to expand...
Click to collapse
No. I reverted back to stock 6.1.1.B.1.54, but touchscreen didn't work eihter
U must have flashed a wrong version
Touchscreen usually fails when u FLASH A WRONG FTF
Try relocking ur bootloader and send it to service center
drsanket_xperia_u said:
U must have flashed a wrong version
Touchscreen usually fails when u FLASH A WRONG FTF
Try relocking ur bootloader and send it to service center
Click to expand...
Click to collapse
I flashed MT27i_6.1.1.B.1.54_Global.ftf
Recovery works, so I flashed my Paranoid Unicorn, MIUI, CM9, AOKP, Ultimate Sola, Pure blood, Paranoid Android v1.4, none of them worked.
It sounds like a hardware problem mate, relock bootloader and repair service.
mirost1 said:
It sounds like a hardware problem mate, relock bootloader and repair service.
Click to expand...
Click to collapse
Thanks!
ChongWiz said:
I properly flashed the FXP205CM9 kernel and rom, over a fresh 6.1.1.B.54 rom, booted, but touchscreen gone. I did the same procedure over 5 times now I'm confused.... Any help appreciated!
Click to expand...
Click to collapse
I got in the same mess as you....but i found the solution for it:highfive:....just flash stock gingerbread and there you go....your touchscreen will restore full functionality.Gud luck...
confused T.T
hey. i have the same problem. it occurs when o flashed ics fw. the touch screen of the sola gets faulty. i flash it back again into gb fw but still problem occurs -_-. please help.
Davichi said:
hey. i have the same problem. it occurs when o flashed ics fw. the touch screen of the sola gets faulty. i flash it back again into gb fw but still problem occurs -_-. please help.
Click to expand...
Click to collapse
send it back they fixed it for free for me
Try flashing Gb
Or try my method about how to get out of this problem
Sent From My Xsola Running Ultimate Ex Rom
Hello to everynoe. Neo v user, rooted but bricked phone... Had stock ics kernel rooted with f/w .587. Flashed UHD but changed mind and wanted to downgrade to gb, .62... The mistake? I flashed immediately the f/w, the ftf file... Of course it stuck at the file "system.[i can't remember]" for too long. After that flashed kernel .562 and tried to flash the same f/w but nothing. Now i downloaded .587 ftf, full... What should i do??? My phone stucks at sony logo...
I know i messed it up but,
help... (Desperate)
Can your phone enter flashmode or fsstboot?
venoma333 said:
Can your phone enter flashmode or fsstboot?
Click to expand...
Click to collapse
If you mean connect it to flashtools and be recognized, yes. As try to flash ftf through flashmode.
Well why don't you just flash a stock ftf?
georgiougio said:
If you mean connect it to flashtools and be recognized, yes. As try to flash ftf through flashmode.
Click to expand...
Click to collapse
well if flashtool recognises your device..then just flash the .587ftf using flashtool.. :good:
Edit: Sorry bout the similar reply..was typin when venoma replied
venoma333 said:
Well why don't you just flash a stock ftf?
Click to expand...
Click to collapse
LoneWanderer said:
well if flashtool recognises your device..then just flash the .587ftf using flashtool.. :good:
Edit: Sorry bout the similar reply..was typin when venoma replied
Click to expand...
Click to collapse
I tried to flash ftf stock but it stucks flashing system.sin... Now i m waiting 14min to flash it.... Same percentage... Should i be more patient??
Is your phone's bootloader unlocked?
venoma333 said:
Is your phone's bootloader unlocked?
Click to expand...
Click to collapse
No.
Then try repairing with SEUS.
Use Google to find it.
venoma333 said:
Then try repairing with SEUS.
Use Google to find it.
Click to expand...
Click to collapse
Well, i tried it too but it tells me "You have the latest version"... I ll try again. Does this program has more functions??? Isn't it just for repairing?
The tool is mainly for updating, but sometimes solves issues like yours.
And which version does it say you have?
Oh and can you use adb?
venoma333 said:
The tool is mainly for updating, but sometimes solves issues like yours.
And which version does it say you have?
Oh and can you use adb?
Click to expand...
Click to collapse
The strange is that it doesn't say any version, just phone model, and "You have the latest version"... I try to flash now gb ftf .62 and i will wait how long it takes... Even 45'! Patience. Nothing else i can do!
Yeah well try that for as long as it takes, I can't think of anything that would solve your issue right now
I upload 2 pic to see how s the situation and give some help... When i open it these 2 appear. Forst the logo. Then the other and closes by its own...
What can i do?????
Try flashing just the stock Kernel of your phone version..
Had the same problem three weeks ago, can't flash system.sin . As far as I know, there's no solution for you. Fortunately, I took the phone to a repair centre and my phone was fixed under warranty (bricked while updating with SUS).
TodorSRB said:
Try flashing just the stock Kernel of your phone version..
Click to expand...
Click to collapse
Yes Todor, this is what i ve done many times in the past and what i tried yesterday and i m going to do it now too. It's just that for some reason yesterday it didn't flash system.sin FOR NOTHING after 25'! I ve unistalled flashtools now, cleaned up reg, and i ll set it up again as i ll update my java.
1 quest: is there ANY possibility that flashtools won't work with a well set up system and software???
Ok. Finally flashed succesfully! Just needed other computer because the one i used was TOOOOOO slow... :laugh: :laugh: :laugh: :laugh: :laugh:
This flashtool issue is becoming more and more common... The best thing to do when flashtool fails is to try in another y computer...
Sent from my Xperia Neo V using xda app-developers app
i think my phone is bricked
unlocked bootloader , still trying to root , no cwm or any recovery . flashed a kernel using flashtool . after that , it just restart at sony logo . is it hopeless or can be saved ?
i tried rooting my xu ics 4.0.4 b.10 but as shown in pic it dint happen...wats d problem?? even in flashtool my device doesnt get identified automatically and i have to manualy select XU but when i do it it shows android version 2.3.4 eventhough i have ics
pls help...thnx in advance...
adyt5 said:
i tried rooting my xu ics 4.0.4 b.10 but as shown in pic it dint happen...wats d problem?? even in flashtool my device doesnt get identified automatically and i have to manualy select XU but when i do it it shows android version 2.3.4 eventhough i have ics
pls help...thnx in advance...
Click to expand...
Click to collapse
Is your USB debugging On.It can be found in developer's options...
akp.ajinkya said:
Is your USB debugging On.It can be found in developer's options...
Click to expand...
Click to collapse
yes usb debugging on,non-market apps install on....evrything perfct still it is happening like dis...
All the drivers installed for your phone?
Sent from my Jellybean Xperia S
Ben36 said:
All the drivers installed for your phone?
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
yupp....still like dis...(
adyt5 said:
i tried rooting my xu ics 4.0.4 b.10 but as shown in pic it dint happen...wats d problem?? even in flashtool my device doesnt get identified automatically and i have to manualy select XU but when i do it it shows android version 2.3.4 eventhough i have ics
pls help...thnx in advance...
Click to expand...
Click to collapse
From the pic it seems that there are more than one devices connected to your PC.Unplug all devices connected via USB and try to root again.
akp.ajinkya said:
From the pic it seems that there are more than one devices connected to your PC.Unplug all devices connected via USB and try to root again.
Click to expand...
Click to collapse
nope man id connected only my xu still coming like this...flashed many times still this persists...wat to do..??
adyt5 said:
nope man id connected only my xu still coming like this...flashed many times still this persists...wat to do..??
Click to expand...
Click to collapse
Reflash the ftf file to your phone,if the problem persists(i.e version is shown as 2.3.x)then flash a different ftf to your phone.
I think the error is occuring because version appears as 2.3.x may be due to some kernel issues.
akp.ajinkya said:
Reflash the ftf file to your phone,if the problem persists(i.e version is shown as 2.3.x)then flash a different ftf to your phone.
I think the error is occuring because version appears as 2.3.x may be due to some kernel issues.
Click to expand...
Click to collapse
i reflashed many times still it occurs like that...different ftf means wat?? shud i flash gb ftf??
adyt5 said:
i reflashed many times still it occurs like that...different ftf means wat?? shud i flash gb ftf??
Click to expand...
Click to collapse
Well i was saying to try ftf for a different region but yep you can try flashing GB ftf too,even i got a weird problem with my touchscreen,it wasn't working after a bad rom flash(not ftf),i tried flashing ICS rom,but it didn't regain functionality.So i placed my last bet on GB ftf and it did work and then i flashed back to ICS.Now its problem free.
So yes..try flashing gb firmware...switch on your phone...then flash ICS firmware and then try rooting.
Gud luck.
akp.ajinkya said:
Well i was saying to try ftf for a different region but yep you can try flashing GB ftf too,even i got a weird problem with my touchscreen,it wasn't working after a bad rom flash(not ftf),i tried flashing ICS rom,but it didn't regain functionality.So i placed my last bet on GB ftf and it did work and then i flashed back to ICS.Now its problem free.
So yes..try flashing gb firmware...switch on your phone...then flash ICS firmware and then try rooting.
Gud luck.
Click to expand...
Click to collapse
ok thnx a lot.. after trying will tell u...
akp.ajinkya said:
Well i was saying to try ftf for a different region but yep you can try flashing GB ftf too,even i got a weird problem with my touchscreen,it wasn't working after a bad rom flash(not ftf),i tried flashing ICS rom,but it didn't regain functionality.So i placed my last bet on GB ftf and it did work and then i flashed back to ICS.Now its problem free.
So yes..try flashing gb firmware...switch on your phone...then flash ICS firmware and then try rooting.
Gud luck.
Click to expand...
Click to collapse
hey i flashed gb world version even then flashtool wasnt identifying it n was showing 2.3.4 dn i flashed french ics even in dat one it dint show up...wat to do?? is there a solution or i shud go to sony service ccentre??
adyt5 said:
hey i flashed gb world version even then flashtool wasnt identifying it n was showing 2.3.4 dn i flashed french ics even in dat one it dint show up...wat to do?? is there a solution or i shud go to sony service ccentre??
Click to expand...
Click to collapse
Hmm...you going to service center and telling them that you are going to root...no,not gonna work.
Have you tried from another PC?
http://forum.xda-developers.com/showthread.php?t=2028139
try this method my friend
akp.ajinkya said:
Hmm...you going to service center and telling them that you are going to root...no,not gonna work.
Have you tried from another PC?
Click to expand...
Click to collapse
no ill tell them to install gb on my phone n at home ill upgrade thru pcc n dn root..
XrhstosDrouggos said:
http://forum.xda-developers.com/showthread.php?t=2028139
try this method my friend
Click to expand...
Click to collapse
tried to do this method but it doesnt workout...dnt knw wat to do...
thnks..
adyt5 said:
no ill tell them to install gb on my phone n at home ill upgrade thru pcc n dn root..
Click to expand...
Click to collapse
Give one last shot to PCC or SUS:flash GB ftf then upgrade it to ICS via PCC/SUS.
And have you tried from another PC?
alaaasss....rooted my xu... i flashed d stok kernel again n dn tried rooting with v15 binary n it worked..
hey how to verify that i ave installed cwm correctly n how to enter recovery mode for nandroid bakup??
i tried it( press volume up key when sony logo appers) but is not hapenning...
adyt5 said:
hey how to verify that i ave installed cwm correctly n how to enter recovery mode for nandroid bakup??
i tried it( press volume up key when sony logo appers) but is not hapenning...
Click to expand...
Click to collapse
Its vol down for cwm.
Sent from my ST27i
Hello! one friend bring me this phone, and it keeps restarting in SONY logo... sony restart, sony restart... and thats how we go all the night...
i tried update via Sony Update Service, i try with flashtool flashing different firmwares... nothing works... keeps restarting...
can anyone help to open this phone please ?
DjTony90 said:
Hello! one friend bring me this phone, and it keeps restarting in SONY logo... sony restart, sony restart... and thats how we go all the night...
i tried update via Sony Update Service, i try with flashtool flashing different firmwares... nothing works... keeps restarting...
can anyone help to open this phone please ?
Click to expand...
Click to collapse
Did u flash ics 4.0.4 .587 ics ftf file using Flah tool???
first remove the battery and leave 10mins and put the battery and flash ics firmware again..if u have a bl unlocked 4n u can flash a custom kernal and see if there is a any result
Arrow11 said:
Did u flash ics 4.0.4 .587 ics ftf file using Flah tool???
first remove the battery and leave 10mins and put the battery and flash ics firmware again..if u have a bl unlocked 4n u can flash a custom kernal and see if there is a any result
Click to expand...
Click to collapse
i flash ICS yes... i dont have unlocked bootloader but if someone help me to flash a custom ROM i will do it... i just need to open the phone...
DjTony90 said:
i flash ICS yes... i dont have unlocked bootloader but if someone help me to flash a custom ROM i will do it... i just need to open the phone...
Click to expand...
Click to collapse
u cant install custom roms without cwm ..
I thins problem has been solved now
Sent from my WT19i using xda premium