my preloader Mt65xx drivers were not installed so my phone was not detected by flash tool after installing i managed to start it after red ribbon completes it shows connect usb in 15 sec after that error shows that
error 8100 cant find usb port
any suggestions where i m doing wrong
Rom Mobiestel cynus T2 Jb rom 4.1.1
Device Canvas 2 a110
error in attachment
Check that is it getting detected in adb is yes then try another version of tool.
Sent from moon to earth........
Related
Has any one Rooted mobistel cynus t2 jb rom running on canvas a110
If yes please help me developers
i m using spflash tool and cant root it
my preloader drivers and Cynus t2 X64 bit are installed.
i downloaded MT65xx drivers from xda site and browsed and drivers got installed named is preloade usb vcom(android) Com 4. i used sp flash tools selected scatter file n recovery pressed download
red bar completes 100% and showing enter usb in 15 sec after that i get an error helpp.............
error 8100 cant find usb port
what should i do know
Try installing the drivers provided with device and root it using adb.
Sent from moon to earth........
I am also having the same problem. Did you find a solution ?? Please help
I am also having the same problem. Did you find a solution ?? Please help
Hello guys.
I have a problem with my phone. It's an Archos 40 Titanium (neither model c or model b).
I flashed recently the rom of Wiko Sunset which is a KitKat rom. I thought it would be fine as wiko sunset has really similar features to my phone. Before I flashed that rom, I made a backup with SP Flash tool.
The problem now is that I can't flash the backup back. I get always Error 4032: Enable_DRAM_Failed. I've tried different versions of SP Flash Tool and drivers (MTK USB and VCOM drivers). I've followed many "guides" that I found on different websites (eg. to flash the preloader of the stock rom without having the battery in the phone etc), but unfortunatelly I get still the same error.
It's maybe worth mentioning that if I connect the phone without the battery and by pusshing VOL+ and power buttons then it connects but after 4-5 seconds it disconnects. If I do the same with the battery on, then it doesn't disconnect.
I am running Windows 7 x64 and Linux through dual boot.
I would be greatful if you guys could help me.
If you need any more info, you can ask me.
Thank you in advance.
Update:
I solved it by myself. After some tries it "accepted" the format I was trying to do (with SP Flash Tool) . Now I am flashing back my backup..
how to
first download the right firmware for this phone
then open sp flash tool and open the scarter from firmware if the firmware is corect all the directions is on screen of sp flash tool.
now click the download buton
after 2 sec remove the batery from your phone and conect the usb cable
windows update find automatic the right drivers mtk 65xx preloader vcom and after 5 sec the drivers is ok.
sp tool now flashing the firmware and the yelow bar work .
when you see the check on green square ,work is finished.
now you can unplung the usb cable and open your device.
What if i ddnt get the stock rom...
My bootloader is gone..
And phone is dead..
Really in financial problem
ELUGA S STOCK ROM...
google drive links are showing
404 error
You can find the right rom for your device on needrom site and flash it again. Check the choice of download+format
Ok.
Hi..
I Have a problem with my Acer Liquid E2 Dual Sim..
Before this, my problem is the phone was stuck in the Ace green logo (Bootloop) and i tried to flash it using SP flash tool, and it flashed succesful until the green circle, but my device gotten even worse, now when i turn on the power, it just vibrate once and continue in blank screen only..and when i try to connect it to the pc, it recognize with a vibrate and blue led turning on, but in the device manager, it detects as MTK USB Port, the is no MTK Preloader or any driver except the mtk usb port
I already googled it, and it seems because i flashed the wrong preloader (it means i used the wrong firmware in the spflashtool), but i downloaded it from the global acer download, And another information i get that my device is in a condition where it enters the low-layer download interface of the MT65xx device (AFAIK).. Thats why it only detects as MTK USB Port. So what to do now? I have tried using SPFlashTool to Dwonload only the preloader checked using from two different rom, but no success both? already tried any different version spflashtool
Every time i tried to download the preloader to the device using spflashtool it just shows "dram failed"
like this
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!"
Does anyone knows how to fix it
Anyboy can help me pleaasee
lukerodriguez said:
Anyboy can help me pleaasee
Click to expand...
Click to collapse
i have same problem bro, is your phone already fix?
MediaTek 6582- canvas A120 ( micromax canvas 2 colours ) unfortunately i made "manual format in SP Flash tool" all the data including mt65xx preloader also deleted from phone. Whole phone is formated including driver.
when phone connected to pc shows device port only what can i do for reinstall mt65xx preloader mobile softwere to mobile?
how can i install MediaTek driver to mobile? {mobile is not opening. no response even connect charging or connected to pc}
how can i reinstall mt65xx driver to phone?
waiting for reply ..... please.
same problem
same problem today any one solution plz tell
Help guys....
My Micromax nitro a310 is suddenly hang on logo ... (Softbricked) .. To solve this , I tried to flash stock ROM (cpb) using YGP tool ... But YGP tool not detecting my phone .. In Device manager it showing yellow marked "Mediatek VCOM port" ..... I tried manually installing drivers... But it says "device cannot start error code 10" ( my PC windows 10. - I disabled driver enforcement already ) I tried on different PC ... Windows 7 but same error
I tried almost each and every VCOM driver .. , and also drivers from moulunsky .. But still it showing error code 10 ... Help plzz ... Tnx in advance