Hi guys, so basically I installed a new rom on my Xperia U but I found another great rom but the thing is, I have to flash C10/B54. and I recently made a clean install of my W7, so I had to install all softwares again, so I installed flashtool and my flashtool driver, and everything was succesful.
But when I tried to flash a stock rom with flashtool and connected my device in flashmode I receive the following error :
"Drivers need to be installed for connected device."
I installed my drivers like 6 times and the installation was succesful but yet I get the same error.
It fails the first time.
1st.connect your device in flashmode then try flashing the ftf..
Press thnx if I helped.
Sent from my ST18i
skb6T9 said:
It fails the first time.
1st.connect your device in flashmode then try flashing the ftf..
Press thnx if I helped.
Sent from my ST18i
Click to expand...
Click to collapse
Didnt work, tried it aswell :l
Try using different usb port
Just once or twice connect phone in flashmode and let windows install drivers by itself
Make sure ftf file aint corrupted or damaged while downloading
as for a fresh machine just install drivers and reboot the system and then connect your fone in flashmode and then let itself install drivers and then start flashtool and then proceed further....... and also try different USB ports as mentioned by sanket........
Hi I tried everything I can think of and still getting this error, anyone has some more ideas?
Sent from my iPad using Tapatalk HD
try safe mode, that disables MTP. but u only have to flash.
XperiaMT27 said:
try safe mode, that disables MTP. but u only have to flash.
Click to expand...
Click to collapse
And how do I do that on XU?
Hel22 said:
And how do I do that on XU?
Click to expand...
Click to collapse
i meant windows safe mode :laugh: .. lolzzzz
XperiaMT27 said:
i meant windows safe mode :laugh: .. lolzzzz
Click to expand...
Click to collapse
LOL god!! Does that make me a super noob??? Hehe I'm just waking up
Now how do I do that?
Hel22 said:
LOL god!! Does that make me a super noob??? Hehe I'm just waking up
Now how do I do that?
Click to expand...
Click to collapse
Microsoft Windows' safe mode is accessed by pressing the F8 key as the operating system boots
XperiaMT27 said:
Microsoft Windows' safe mode is accessed by pressing the F8 key as the operating system boots
Click to expand...
Click to collapse
Ok and then I do procedure again but without installing any drivers? Just use the flash tool?
Pls check my reply on this thread
http://forum.xda-developers.com/showthread.php?p=38421535
Sent from my Xperia Sola using xda premium
Hel22 said:
Ok and then I do procedure again but without installing any drivers? Just use the flash tool?
Click to expand...
Click to collapse
assuming u had the drivers installed in normal mode.. going in safe mode will prevent the driver installation failed error. try if the other method didnt work.
soulhackereborn said:
Pls check my reply on this thread
http://forum.xda-developers.com/showthread.php?p=38421535
Sent from my Xperia Sola using xda premium
Click to expand...
Click to collapse
Thanks. I'm checking all threads. I asked this question in few places.
Sent from my iPad using Tapatalk HD
Riyadh97 said:
Hi guys, so basically I installed a new rom on my Xperia U but I found another great rom but the thing is, I have to flash C10/B54. and I recently made a clean install of my W7, so I had to install all softwares again, so I installed flashtool and my flashtool driver, and everything was succesful.
But when I tried to flash a stock rom with flashtool and connected my device in flashmode I receive the following error :
"Drivers need to be installed for connected device."
I installed my drivers like 6 times and the installation was succesful but yet I get the same error.
Click to expand...
Click to collapse
check the drivers for your phone and also flashboot,flashmode drivers
happy flashing
I had that error too. I solved it changing usb port and install the driver there. However have you installed the driver of xperia u in flashtool?
Install PC companion if it doesn't work install drivers manually
Sent Using RAPROM For U
Related
i have a problem with fera kernel 4.5 , my pc don't detect the phone in storage or flash mode , maybe if i flash a backup of the original firmware in recovery will solve the problem
hunter-azsama said:
i have a problem with fera kernel 4.5 , my pc don't detect the phone in storage or flash mode , maybe if i flash a backup of the original firmware in recovery will solve the problem
Click to expand...
Click to collapse
Try X10S V9 rom by Tof for locked bootloader uset!!!
BTW, how many USB ports on your pc???
Connect to another port!!!
or re-install PC Companion!!!
Cheers
XtremX10 said:
Try X10S V9 rom by Tof for locked bootloader uset!!!
BTW, how many USB ports on your pc???
Connect to another port!!!
or re-install PC Companion!!!
Cheers
Click to expand...
Click to collapse
i tried everything , what i need is a way to change the kernel without using flashtool , so maybe a backup will do this
hunter-azsama said:
i tried everything , what i need is a way to change the kernel without using flashtool , so maybe a backup will do this
Click to expand...
Click to collapse
Well...... the options is :
- Flashtool
- Recovery
- Boot Manager
- PC Companion, and
- SEUS, thats all i knew
Have u tried to uninstall and re-install pc companion???? or tried it on another ports or tried it on another PC???? or Laptop???
XtremX10 said:
Well...... the options is :
- Flashtool
- Recovery
- Boot Manager
- PC Companion, and
- SEUS, thats all i knew
Have u tried to uninstall and re-install pc companion???? or tried it on another ports or tried it on another PC???? or Laptop???
Click to expand...
Click to collapse
i tried everything
even storage mode is not working
hunter-azsama said:
i tried everything
even storage mode is not working
Click to expand...
Click to collapse
Then,.. check your usb wire/cable!!!! use another phone or devices, perhaps its time to check usb
port on board.
ok , thanks bro
No way to change kernel except flashtool or repair with SEUS/PC companion. If SEUS/pcc says your software is up to date, click install anyway.
Sent from my LT28i using xda app-developers app
did you try flashing cm9.1 of fxp ? I think it's Rom related . I used fera 4.5 with fxp Rom without any problems
Sent from my X10i using xda premium
hunter-azsama said:
i tried everything
even storage mode is not working
Click to expand...
Click to collapse
What rom are you using my friend?
Please press my THANKS Button if i helped you..cheers.
Sent from my own CM7 using XDA premium app..
Does anyone have a stock ics backup of xperia u ST25i, because when i try to flash the stock rom via flashtool it says usb device not recongised. Plz help me. My only way to go to stock ics is to restore a backup via cwm. Help plz.
Using CM9 fxp209. Very slow!
toffe123 said:
Does anyone have a stock ics backup of xperia u ST25i, because when i try to flash the stock rom via flashtool it says usb device not recongised. Plz help me. My only way to go to stock ics is to restore a backup via cwm. Help plz.
Using CM9 fxp209. Very slow!
Click to expand...
Click to collapse
You can go to stock ics with cwm but it will get stuck in bootlogo. Cause u don't have a stock ics kernel.(fxp is not a stock kernel)
U must flash a stock kernel 1st.
Press thnx if I helped.
Sent from my ST18i
skb6T9 said:
You can go to stock ics with cwm but it will get stuck in bootlogo. Cause u don't have a stock ics kernel.(fxp is not a stock kernel)
U must flash a stock kernel 1st.
Press thnx if I helped.
Sent from my ST18i
Click to expand...
Click to collapse
Correction stock kernel with CWM but a glitch is there the MD5 sum might not be detected if backed up from specific stock based kernels and flashing will be aborted ...
U can try ur luck though
Sent from my Xperia Sola using xda premium
skb6T9 said:
You can go to stock ics with cwm but it will get stuck in bootlogo. Cause u don't have a stock ics kernel.(fxp is not a stock kernel)
U must flash a stock kernel 1st.
Press thnx if I helped.
Sent from my ST18i
Click to expand...
Click to collapse
First tahnks for replying, I can not flash a stock kernel becasue when i go to fastboot my pc says usb device unrecongiesd but if i am on my homescreen my pc allows me to transfer files to my phone. plz help btw i will thank you.
toffe123 said:
First tahnks for replying, I can not flash a stock kernel becasue when i go to fastboot my pc says usb device unrecongiesd but if i am on my homescreen my pc allows me to transfer files to my phone. plz help btw i will thank you.
Click to expand...
Click to collapse
Bro that means fastboot & flashtool drivers are not installed or not installed correctly..
Do this go to C:/ Flashtool /drivers/drivers.exe and install this exe file
Warning pop ups will be given by window but you will choose "install drivers anyways "
Reboot Desktop and phone then try connecting in fastboot or flashtool
Sent from my Xperia Sola using xda premium
I tried it but it does not work. flashtool drivers are
Already installed. I'm stuck with cm9? Help plz thanks
Sent from my Xperia U using xda app-developers app
have you tried fastboot another kernel and flash another rom via cwm?
or if youre on fxp kernel, just flash some other fxp based rom?
I can't fast boot anything because my PC does not detect my phone. Thanks for reply.
Sent from my Xperia U using xda app-developers app
I had similar problem with all drivers properly installed, i tried everything and nothing... until i uninstalled the "DroidExplorer" .
Probably it was some kind of driver conflict or something, so if you are using anything like that.. uninstall it and try
pirej said:
I had similar problem with all drivers properly installed, i tried everything and nothing... until i uninstalled the "DroidExplorer" .
Probably it was some kind of driver conflict or something, so if you are using anything like that.. uninstall it and try
Click to expand...
Click to collapse
can you tell me where droid explorer is located i cant find it with root uninstaller. It will be an honour if i fix this problem.:crying:
Its not in your phone, its a windows application for managing an android phone.
My point was to see if you have any drivers conflict...
When you plug the phone to your PC, what does it show in "my computer"?? When i had the problem.. in mu computer my device showed as two devices with different names.
all fixed
thnx guys the prblem is fixed all i done was enter fastboot and sony adb drivers installed thnx for your help guys. i have removed cm9 now hooray!
Prob is fixed
pirej said:
Its not in your phone, its a windows application for managing an android phone.
My point was to see if you have any drivers conflict...
When you plug the phone to your PC, what does it show in "my computer"?? When i had the problem.. in mu computer my device showed as two devices with different names.
Click to expand...
Click to collapse
Thnx but prob is fixed!!!
Hi, all.
I have upload to my phone FXP 227 from the UNRESTRICT.LI/FXP. When i wipe cache and reboot phone it's install some of the programs (may be 84 i count) and then stuck on Android update... The OS not start. So i want to go back to 226 but when i don't have a OS how to do it? I use CWM v6.0.2.8 but can't mount the storage whit USB... I have install a driver for USB from Sony site the driver is recognize, but can't load any drives..
Any help is useful!
Infinity_bg said:
Hi, all.
I have upload to my phone FXP 227 from the UNRESTRICT.LI/FXP. When i wipe cache and reboot phone it's install some of the programs (may be 84 i count) and then stuck on Android update... The OS not start. So i want to go back to 226 but when i don't have a OS how to do it? I use CWM v6.0.2.8 but can't mount the storage whit USB... I have install a driver for USB from Sony site the driver is recognize, but can't load any drives..
Any help is useful!
Click to expand...
Click to collapse
Did you wipe personal data and wiped dalvik cache also mate?
DaRk-L0rD said:
Did you wipe personal data and wiped dalvik cache also mate?
Click to expand...
Click to collapse
Affirmative. I do it several times... no luck at all.
Infinity_bg said:
Affirmative. I do it several times... no luck at all.
Click to expand...
Click to collapse
The only solution mate is the one that IAmNice told you. Flash stock rom and then try installing again cm.
IAmNice said:
Can you go into flashmode? If you can use flashtool to flash a stock ROM and then flash fxp 226..
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
No i don't tray that already... i forgot hot to use that tool hahaha, all the time updates goes smooth so i don't use it for long time. Is there any new version of that tool and way to do it safely? And were is the web page that can download the last versions, drivers and etc.
Infinity_bg said:
No i don't tray that already... i forgot hot to use that tool hahaha, all the time updates goes smooth so i don't use it for long time. Is there any new version of that tool and way to do it safely? And were is the web page that can download the last versions, drivers and etc.
Click to expand...
Click to collapse
Drivers are already included for most of xperia devices.
Here you can download the latest version: http://androxyde.github.io/
There is also a tutorial on youtube on how to use flashtool.
Thanks all now i am searching for stock ROM... any for Europe.
PS: I manage to repair but whit CWM. Just have a backup for CM 9.
And i tray Flash tool but when i have CWM installed how to enter in flash boot. I have remember that there is something like UP and Down button that is for sound volume change but this not works.
Infinity_bg said:
Thanks all now i am searching for stock ROM... any for Europe.
PS: I manage to repair but whit CWM. Just have a backup for CM 9.
And i tray Flash tool but when i have CWM installed how to enter in flash boot. I have remember that there is something like UP and Down button that is for sound volume change but this not works.
Click to expand...
Click to collapse
You cam access fastboot mode this way:
turn off the phone
Plug usb cable on pc
Press volume up key while plugging usb on your phone. You will see that the led bar becomes blue.
Done
Hello,
I flashed my GT-S5830i with the following 201303051129-CM7-boot.img.zip from http://forum.xda-developers.com/showthread.php?t=1818830 via CWM as i wanted to change the kernel i was on due to having issues with it but now i cant apply the Zip of the ROM due to CWM not responding to key presses and my PC wont detect the Phone in Odin Mode. I have the all in one package from here http://forum.xda-developers.com/showthread.php?t=2054182 can anyone help me out?
Many Thanks
Thomas Bennett
Tommo1992 said:
Hello,
I flashed my GT-S5830i with the following 201303051129-CM7-boot.img.zip from http://forum.xda-developers.com/showthread.php?t=1818830 via CWM as i wanted to change the kernel i was on due to having issues with it but now i cant apply the Zip of the ROM due to CWM not responding to key presses and my PC wont detect the Phone in Odin Mode. I have the all in one package from here http://forum.xda-developers.com/showthread.php?t=2054182 can anyone help me out?
Many Thanks
Thomas Bennett
Click to expand...
Click to collapse
First delete all Preinstalled drivers and then connect your phone to Odin wait for sec to recognize it and it will download again all drivers
After that flash Stock Firmware ..
And about that kernel flash its boot.img.zip + Modules by CWM .
Hitesh2626 said:
First delete all Preinstalled drivers and then connect your phone to Odin wait for sec to recognize it and it will download again all drivers
After that flash Stock Firmware ..
And about that kernel flash its boot.img.zip + Modules by CWM .
Click to expand...
Click to collapse
i tired this but still no luck as my PC and Odin Wont find my phone
Tommo1992 said:
i tired this but still no luck as my PC and Odin Wont find my phone
Click to expand...
Click to collapse
As before you PC recognises you phone?
If yes then try with different Odin
Hitesh2626 said:
As before you PC recognises you phone?
If yes then try with different Odin
Click to expand...
Click to collapse
Nope it has never been detected by my PC
Tommo1992 said:
Nope it has never been detected by my PC
Click to expand...
Click to collapse
Delete all usb drivers from pc and install new usb driver of your mobile and then try if its not working then try from another pc
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Delete all usb drivers from pc and install new usb driver of your mobile and then try if its not working then try from another pc
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Hello, i tried on a new PC but i get unknown device and i can seem to install the drivers to the device any advise?
Tommo1992 said:
Hello, i tried on a new PC but i get unknown device and i can seem to install the drivers to the device any advise?
Click to expand...
Click to collapse
Install drivers first and then try
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Install drivers first and then try
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
i tired to install the drivers but still no luck
Tommo1992 said:
i tired to install the drivers but still no luck
Click to expand...
Click to collapse
Then go to the service centre ..they flash with dongle..or install kies and try
Sent from my GT-S5830i using Tapatalk 2
Try the Odin from this thread,
[Guide] Know your Device: Galaxy Ace GT-S5830i
Tommo1992 said:
i tired to install the drivers but still no luck
Click to expand...
Click to collapse
Try to install samsung mobile usb driver.
For some reason CWM started to work again so i flashed a new kernel and a Custom Rom so its now working
Hi,
I know that i can flash new rom from TWRP recovery(as steps described in each rom Page), i want to know do i have to flash a kernel also in order to flash a rom?
and How to move back to stock rom if in case i wish to move back, i am unable to flash through SP Flash tool, so is it possbile to reflash to the stock rom using TWRP. Plz help.
thanks
ankur_shah88 said:
Hi,
I know that i can flash new rom from TWRP recovery(as steps described in each rom Page), i want to know do i have to flash a kernel also in order to flash a rom?
and How to move back to stock rom if in case i wish to move back, i am unable to flash through SP Flash tool, so is it possbile to reflash to the stock rom using TWRP. Plz help.
thanks
Click to expand...
Click to collapse
You dont have to flash a kernel while flashing ROMs.
N what problems are you facing while flashing thrugh sp tools?????????
thejoker said:
You dont have to flash a kernel while flashing ROMs.
N what problems are you facing while flashing thrugh sp tools?????????
Click to expand...
Click to collapse
my windows 7 doestn't detect my a116(in device manager), i have tried every possible way.
i can flsh through twrp?
and what about stock rom?
Jst install this driver..And your good to go!!!!
thejoker said:
Jst install this driver..And your good to go!!!!
Click to expand...
Click to collapse
Bro, how to install this, whenever i connect my phone to my laptop (both way, switch on and off, with and withour battery), it appears in device manager for 1 sec, and then disappears.
any other advice?
ankur_shah88 said:
Bro, how to install this, whenever i connect my phone to my laptop (both way, switch on and off, with and withour battery), it appears in device manager for 1 sec, and then disappears.
any other advice?
Click to expand...
Click to collapse
tht s because the drivers are not installed and u ll hav to install the drivers
it s appearing in ur device manager nd gng coz it s trying to install the drivers and not able to so u need to install the drivers manually inorder to get ur device detected
jayadu said:
tht s because the drivers are not installed and u ll hav to install the drivers
it s appearing in ur device manager nd gng coz it s trying to install the drivers and not able to so u need to install the drivers manually inorder to get ur device detected
Click to expand...
Click to collapse
Exactly......
jayadu said:
tht s because the drivers are not installed and u ll hav to install the drivers
it s appearing in ur device manager nd gng coz it s trying to install the drivers and not able to so u need to install the drivers manually inorder to get ur device detected
Click to expand...
Click to collapse
and how to manually install such driver??
ankur_shah88 said:
and how to manually install such driver??
Click to expand...
Click to collapse
http://www.micromaxinfo.com/mobiles/smartphones/canvas/A116-canvas-HD
go to the webiste nd select downloads nd select drivers nd it ll help u download the required drivrers