Hi,
I know that i can flash new rom from TWRP recovery(as steps described in each rom Page), i want to know do i have to flash a kernel also in order to flash a rom?
and How to move back to stock rom if in case i wish to move back, i am unable to flash through SP Flash tool, so is it possbile to reflash to the stock rom using TWRP. Plz help.
thanks
ankur_shah88 said:
Hi,
I know that i can flash new rom from TWRP recovery(as steps described in each rom Page), i want to know do i have to flash a kernel also in order to flash a rom?
and How to move back to stock rom if in case i wish to move back, i am unable to flash through SP Flash tool, so is it possbile to reflash to the stock rom using TWRP. Plz help.
thanks
Click to expand...
Click to collapse
You dont have to flash a kernel while flashing ROMs.
N what problems are you facing while flashing thrugh sp tools?????????
thejoker said:
You dont have to flash a kernel while flashing ROMs.
N what problems are you facing while flashing thrugh sp tools?????????
Click to expand...
Click to collapse
my windows 7 doestn't detect my a116(in device manager), i have tried every possible way.
i can flsh through twrp?
and what about stock rom?
Jst install this driver..And your good to go!!!!
thejoker said:
Jst install this driver..And your good to go!!!!
Click to expand...
Click to collapse
Bro, how to install this, whenever i connect my phone to my laptop (both way, switch on and off, with and withour battery), it appears in device manager for 1 sec, and then disappears.
any other advice?
ankur_shah88 said:
Bro, how to install this, whenever i connect my phone to my laptop (both way, switch on and off, with and withour battery), it appears in device manager for 1 sec, and then disappears.
any other advice?
Click to expand...
Click to collapse
tht s because the drivers are not installed and u ll hav to install the drivers
it s appearing in ur device manager nd gng coz it s trying to install the drivers and not able to so u need to install the drivers manually inorder to get ur device detected
jayadu said:
tht s because the drivers are not installed and u ll hav to install the drivers
it s appearing in ur device manager nd gng coz it s trying to install the drivers and not able to so u need to install the drivers manually inorder to get ur device detected
Click to expand...
Click to collapse
Exactly......
jayadu said:
tht s because the drivers are not installed and u ll hav to install the drivers
it s appearing in ur device manager nd gng coz it s trying to install the drivers and not able to so u need to install the drivers manually inorder to get ur device detected
Click to expand...
Click to collapse
and how to manually install such driver??
ankur_shah88 said:
and how to manually install such driver??
Click to expand...
Click to collapse
http://www.micromaxinfo.com/mobiles/smartphones/canvas/A116-canvas-HD
go to the webiste nd select downloads nd select drivers nd it ll help u download the required drivrers
Related
Hi,
i have a xperia Live wt19i. I followed this istruction http://forum.xda-developers.com/showthread.php?t=1695514 to root the phone.
Then I installed CWM with the application X-part in the market.
Everything went ok so far.
So in the CWM i flashed the Real ICS Lite zip but when the phone rebooted i got a bootloop on the Sony logo.
I can't get to the recovery and FlashTool reports error when i try to flash stock roms.
Can someone help me?
i laughed a little.im soo jelaous at the LWW users.anyways,try again with flashtool.you got the error maybe cuz you dont have the drivers.
shadik555 said:
i laughed a little.im soo jelaous at the LWW users.anyways,try again with flashtool.you got the error maybe cuz you dont have the drivers.
Click to expand...
Click to collapse
I already flashed with Flashtool, there are no problem with the drivers
q123ita said:
I already flashed with Flashtool, there are no problem with the drivers
Click to expand...
Click to collapse
ok i installed flashtool on linux machine and it did correctly flash stock ics.
Anyway i want to install a custom rom and avoid bootloops.
q123ita said:
ok i installed flashtool on linux machine and it did correctly flash stock ics.
Anyway i want to install a custom rom and avoid bootloops.
Click to expand...
Click to collapse
Did you install it with the given instruction on the post to the letter, and did you install Facebook in aroma installer when doing it? i know that causes the bootloop, anyway reroot your current ics firmware, then try again.
q123ita said:
Hi,
i have a xperia Live wt19i. I followed this istruction http://forum.xda-developers.com/showthread.php?t=1695514 to root the phone.
Then I installed CWM with the application X-part in the market.
Everything went ok so far.
So in the CWM i flashed the Real ICS Lite zip but when the phone rebooted i got a bootloop on the Sony logo.
I can't get to the recovery and FlashTool reports error when i try to flash stock roms.
Can someone help me?
Click to expand...
Click to collapse
are you using correct kernel for ur new rom, this may be the cause of bootloop
what error flashtool is showing?
alu7616 said:
Did you install it with the given instruction on the post to the letter, and did you install Facebook in aroma installer when doing it? i know that causes the bootloop, anyway reroot your current ics firmware, then try again.
Click to expand...
Click to collapse
thank you, i will try to reinstall it with Facebook checked.
one more question, should i wipe caches in CWM before lauch aroma installer?
yy.yogesh007 said:
are you using correct kernel for ur new rom, this may be the cause of bootloop
what error flashtool is showing?
Click to expand...
Click to collapse
I didn't flash any kernel because it wasn't asked in the installation instructions. I thought it was included in the zip file.
i tried ir again and i got another bootload
You must see instructions, if there is a kernel/boot.img to flash, you have to flash it. But that only works if your bootloader is unlocked. Maybe try another rom than realics
It happened the same to me ... The problem Is with kernel.. You should flash recommended kernel for the given Rom ... Bootloop will be the thing of past ...
Sent from my WT19i using xda app-developers app
Real ICS does supports locked bootloader, just make sure that in aroma installer u selec the the lock bl option and the right phone model and it should work. u can also try unlocking your bl and flash to custom kernel
You have to flash correct kernel attach to the ROM
Does anyone have a stock ics backup of xperia u ST25i, because when i try to flash the stock rom via flashtool it says usb device not recongised. Plz help me. My only way to go to stock ics is to restore a backup via cwm. Help plz.
Using CM9 fxp209. Very slow!
toffe123 said:
Does anyone have a stock ics backup of xperia u ST25i, because when i try to flash the stock rom via flashtool it says usb device not recongised. Plz help me. My only way to go to stock ics is to restore a backup via cwm. Help plz.
Using CM9 fxp209. Very slow!
Click to expand...
Click to collapse
You can go to stock ics with cwm but it will get stuck in bootlogo. Cause u don't have a stock ics kernel.(fxp is not a stock kernel)
U must flash a stock kernel 1st.
Press thnx if I helped.
Sent from my ST18i
skb6T9 said:
You can go to stock ics with cwm but it will get stuck in bootlogo. Cause u don't have a stock ics kernel.(fxp is not a stock kernel)
U must flash a stock kernel 1st.
Press thnx if I helped.
Sent from my ST18i
Click to expand...
Click to collapse
Correction stock kernel with CWM but a glitch is there the MD5 sum might not be detected if backed up from specific stock based kernels and flashing will be aborted ...
U can try ur luck though
Sent from my Xperia Sola using xda premium
skb6T9 said:
You can go to stock ics with cwm but it will get stuck in bootlogo. Cause u don't have a stock ics kernel.(fxp is not a stock kernel)
U must flash a stock kernel 1st.
Press thnx if I helped.
Sent from my ST18i
Click to expand...
Click to collapse
First tahnks for replying, I can not flash a stock kernel becasue when i go to fastboot my pc says usb device unrecongiesd but if i am on my homescreen my pc allows me to transfer files to my phone. plz help btw i will thank you.
toffe123 said:
First tahnks for replying, I can not flash a stock kernel becasue when i go to fastboot my pc says usb device unrecongiesd but if i am on my homescreen my pc allows me to transfer files to my phone. plz help btw i will thank you.
Click to expand...
Click to collapse
Bro that means fastboot & flashtool drivers are not installed or not installed correctly..
Do this go to C:/ Flashtool /drivers/drivers.exe and install this exe file
Warning pop ups will be given by window but you will choose "install drivers anyways "
Reboot Desktop and phone then try connecting in fastboot or flashtool
Sent from my Xperia Sola using xda premium
I tried it but it does not work. flashtool drivers are
Already installed. I'm stuck with cm9? Help plz thanks
Sent from my Xperia U using xda app-developers app
have you tried fastboot another kernel and flash another rom via cwm?
or if youre on fxp kernel, just flash some other fxp based rom?
I can't fast boot anything because my PC does not detect my phone. Thanks for reply.
Sent from my Xperia U using xda app-developers app
I had similar problem with all drivers properly installed, i tried everything and nothing... until i uninstalled the "DroidExplorer" .
Probably it was some kind of driver conflict or something, so if you are using anything like that.. uninstall it and try
pirej said:
I had similar problem with all drivers properly installed, i tried everything and nothing... until i uninstalled the "DroidExplorer" .
Probably it was some kind of driver conflict or something, so if you are using anything like that.. uninstall it and try
Click to expand...
Click to collapse
can you tell me where droid explorer is located i cant find it with root uninstaller. It will be an honour if i fix this problem.:crying:
Its not in your phone, its a windows application for managing an android phone.
My point was to see if you have any drivers conflict...
When you plug the phone to your PC, what does it show in "my computer"?? When i had the problem.. in mu computer my device showed as two devices with different names.
all fixed
thnx guys the prblem is fixed all i done was enter fastboot and sony adb drivers installed thnx for your help guys. i have removed cm9 now hooray!
Prob is fixed
pirej said:
Its not in your phone, its a windows application for managing an android phone.
My point was to see if you have any drivers conflict...
When you plug the phone to your PC, what does it show in "my computer"?? When i had the problem.. in mu computer my device showed as two devices with different names.
Click to expand...
Click to collapse
Thnx but prob is fixed!!!
Ok so I am new to Custom ROMs and I installed a ROM called Nexus v.1.0, I think it is JellyBean v4.3.3 or something. I rooted my phone first and dowloaded an app to check if it was rooted. It said Yes so I proceeded to flash Nexus onto my device. It installed correctly but now when I switch on my phone, it just stops on the screen where it says Android. It doesn't go any further no matter how long I wait. I didn't use Titanium or ClockWork or any of those other things while doing this. What do I do? :crying:
mikekiller134 said:
ok so i am new to custom roms and i installed a rom called nexus v.1.0, i think it is jellybean v4.3.3 or something. I rooted my phone first and dowloaded an app to check if it was rooted. It said yes so i proceeded to flash nexus onto my device. It installed correctly but now when i switch on my phone, it just stops on the screen where it says android. It doesn't go any further no matter how long i wait. I didn't use titanium or clockwork or any of those other things while doing this. What do i do? :crying:
Click to expand...
Click to collapse
bro ...flash the stock rom...it will solve the problem
siva aggzz said:
bro ...flash the stock rom...it will solve the problem
Click to expand...
Click to collapse
Problem is I don't have the stock ROM and to put the Stock ROM on my SD Card I need to be able to get past the boot screen on my phone so I can connect it to my PC. So I need to get a download of the Stock ROM and I need to be able to put it on my SD Card without connecting my phone to my PC.
MikeKiller134 said:
Problem is I don't have the stock ROM and to put the Stock ROM on my SD Card I need to be able to get past the boot screen on my phone so I can connect it to my PC. So I need to get a download of the Stock ROM and I need to be able to put it on my SD Card without connecting my phone to my PC.
Click to expand...
Click to collapse
Bro stock rom doesnt need to b copied in ur sd card... Its dne through pc..it can b flashed udin odin
siva aggzz said:
Bro stock rom doesnt need to b copied in ur sd card... Its dne through pc..it can b flashed udin odin
Click to expand...
Click to collapse
I know but for your device to show up on Odin you have to get on your phone and give it permission to connect to the PC. Since I can't get past the boot I can't give it access so it can't connect to my PC.
MikeKiller134 said:
I know but for your device to show up on Odin you have to get on your phone and give it permission to connect to the PC. Since I can't get past the boot I can't give it access so it can't connect to my PC.
Click to expand...
Click to collapse
Go to dwnload mode... And den flash through odin
i wanted to flash cm11 on my xperia u,so i put the zip folder in my device ad went into cwm and did all the wipes,formatted system then when i flashed the rom i got status 7 error :crying: i tried fixing permissions but nothing worked,now iam stuck in sony bootlogo
even my flashtool isn't recognising my deice(i am running windows 8.1)it doesn't even connect in fastbootmode,flashmode :crying:
plz help me!
weirdovivek said:
i wanted to flash cm11 on my xperia u,so i put the zip folder in my device ad went into cwm and did all the wipes,formatted system then when i flashed the rom i got status 7 error :crying: i tried fixing permissions but nothing worked,now iam stuck in sony bootlogo
even my flashtool isn't recognising my deice(i am running windows 8.1)it doesn't even connect in fastbootmode,flashmode :crying:
plz help me!
Click to expand...
Click to collapse
And what made you try a rom in development when you don't have the means to recover from disaster which would surely happen?
Try to see if in the stiky for windows 8 drivers, and flashtool windows 8 instructions if anything works there for you.
Try
Do you use USB 3 ports? Someone have posted solution for them a while ago in the forum, search it.
If you are able to enter cwm then mount the sdcard and load the zip of the rom previously installed on your phone and flash it !
ChikeD said:
And what made you try a rom in development when you don't have the means to recover from disaster which would surely happen?
Try to see if in the stiky for windows 8 drivers, and flashtool windows 8 instructions if anything works there for you.
Try
Do you use USB 3 ports? Someone have posted solution for them a while ago in the forum, search it.
Click to expand...
Click to collapse
no i dont have USB 3 ports,but i will try the other two methods and report back
k13k said:
If you are able to enter cwm then mount the sdcard and load the zip of the rom previously installed on your phone and flash it !
Click to expand...
Click to collapse
i dont have the previous rom zip in my sd card,i didn't face any status 7 error while flashing nightly-1 so i didnt think about backing up or putting an extra rom....now suffering the consequences
weirdovivek said:
i dont have the previous rom zip in my sd card,i didn't face any status 7 error while flashing nightly-1 so i didnt think about backing up or putting an extra rom....now suffering the consequences
Click to expand...
Click to collapse
Is you cwm recovery still functioning?
If it does see if you can mount USB storage and copy rom zip to it.
Do your PC recognize the phone, even in flashmode?
Windows key + R, type devmgmt.msc, connect the phone and look if the screen turns white. If it recognized then flashtool should have it too, if not, install drivers as @chickeD said.
Sent from my Xperia Sola using xda premium
ChikeD said:
Is you cwm recovery still functioning?
If it does see if you can mount USB storage and copy rom zip to it.
Click to expand...
Click to collapse
my cwm is still working but my pc doesn't recognise when i connect phone to pc.....i've tried the above methods...still when i connect in flashmode it stays there for a while then a msg pops up saying drivers not available
thanks anyways
i can't do this anymore tried all methods.....i am going to my friend's house he has win7 so will install flashtool in his pc and flash stock firmware
Cm11 Bootloop
i flashed cm11 android 4.4 kitkat on my phone today .... even after doing all the wipes every time the phone boots after like 20 seconds of use it goes into a bootloop
i thought it was a nightly-1 error so i flashed mclaw's version but the problem still persists
does anyone know a solution for this ?
Thank You
p.s : i changed to cm 11 from MIUI v5 . is there a problem there ?
weirdovivek said:
my cwm is still working but my pc doesn't recognise when i connect phone to pc.....i've tried the above methods...still when i connect in flashmode it stays there for a while then a msg pops up saying drivers not available
Click to expand...
Click to collapse
I wasn't talking about flash mode. When in CWM go to mounts and mount USB storage at the bottom, in theory you should be able to mount it on your PC, never work for me though because I cannot find the MTP drivers or maybe my CWM is not the greatest, but I never had one that did work.
Did the disable driver signing from flashtool site didn't work either?
Also look at this post and see if that works for you.
ChikeD said:
I wasn't talking about flash mode. When in CWM go to mounts and mount USB storage at the bottom, in theory you should be able to mount it on your PC, never work for me though because I cannot find the MTP drivers or maybe my CWM is not the greatest, but I never had one that did work.
Did the disable driver signing from flashtool site didn't work either?
Also look at this post and see if that works for you.
Click to expand...
Click to collapse
dude i've tried every possible method,but nothing worked for me...and in cwm also i was not able to mount it on my pc
P.S:now i've flashed stock from my friend's pc and reverted back to cm11
flash the latest kernel,do all the wipes,format system,flash the latest nightly
androidous said:
i flashed cm11 android 4.4 kitkat on my phone today .... even after doing all the wipes every time the phone boots after like 20 seconds of use it goes into a bootloop
i thought it was a nightly-1 error so i flashed mclaw's version but the problem still persists
does anyone know a solution for this ?
Thank You
p.s : i changed to cm 11 from MIUI v5 . is there a problem there ?
Click to expand...
Click to collapse
u have to format ur system before installing cm11 but be careful..i got a status 7 error while flashing the latest nightly so i was stuck in a bootloop....put an additional rom in ur sd card(in case if anything goes wrong u can flash it) and edit the updater script so that u dont get that error
weirdovivek said:
u have to format ur system before installing cm11 but be careful..i got a status 7 error while flashing the latest nightly so i was stuck in a bootloop....put an additional rom in ur sd card(in case if anything goes wrong u can flash it) and edit the updater script so that u dont get that error
Click to expand...
Click to collapse
i did have a backup of my miui 5 but even now when i flash cm11 it still bootloops after a while .. any help ? :/
---------- Post added at 10:01 AM ---------- Previous post was at 09:55 AM ----------
weirdovivek said:
u have to format ur system before installing cm11 but be careful..i got a status 7 error while flashing the latest nightly so i was stuck in a bootloop....put an additional rom in ur sd card(in case if anything goes wrong u can flash it) and edit the updater script so that u dont get that error
Click to expand...
Click to collapse
i did have a backup of my miui 5 but even now when i flash cm11 it still bootloops after a while .. any help ? :/
maybe u should try the latest build which is out just now check cm11 thread
androidous said:
i did have a backup of my miui 5 but even now when i flash cm11 it still bootloops after a while .. any help ? :/
---------- Post added at 10:01 AM ---------- Previous post was at 09:55 AM ----------
i did have a backup of my miui 5 but even now when i flash cm11 it still bootloops after a while .. any help ? :/
Click to expand...
Click to collapse
follow the intructions for flashing the rom as suggested by op in cm11 thread and u will have no bootloops
Man, flash other ROM that it worked on your phone. I think the most important here is to get out of that bootloop so flash stock or other ROM like eXperience.
Later on you can flash CM11 from the computer.
Sent from my Xperia Sola using xda premium
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Thanks for quick reply
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
headlessNick said:
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
Click to expand...
Click to collapse
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
shaijuvjohn said:
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
Click to expand...
Click to collapse
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
headlessNick said:
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Click to expand...
Click to collapse
Try YGDP and flash stock and then restore the backup if available.
When you flash the stock rom it will repalce the twrp also. We can easily install twrp through ygdp. Follow the steps.
1. Select your .cpb file and apply
2. YGDP will unzip the cpb file, path may be C:\YLXZGJ\YGDP\DownFiles\8297W (in my system this is the path, please check after unzipping)
3. Check the unzipped folder contents
4. There will be a file named recovery.img
5. Delete the recovery.img file
6. Copy your twrp recovery to the unzipped folder and rename it to recovery.img
7. Click on start button
8. Remove battery from your phone and connect it to the usb
9. It will detect your phone and start flashing
10. Wait for flashing finishes to 100 %
11. Done. Disconnect phone. You flashed stock rom with twrp recovery
12. Copy the backup to memory card and insert it in phone
12. Insert battery and press power button and volume up key, go to twrp recovery, restore your backup and enjoy
---------- Post added at 12:00 PM ---------- Previous post was at 11:56 AM ----------
headlessNick said:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
Click to expand...
Click to collapse
http://www.needrom.com/wp-content/uploads/2014/10/YGDP_Setup_V3.83_Assembly.zip
Try this one, i am using this one on A311.
You need to have these drivers installed in your system - DA USB VCOM Port, PreLoader USB VCOM (Android)
If you have drivers not installed use the below one from the attachment. :victory:
Thanks - Tying...
headlessNick said:
Thanks - Tying...
Click to expand...
Click to collapse
Thanks a lot guys especially
shaijuvjohn said:
shaijuvjohn
Click to expand...
Click to collapse
, I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
headlessNick said:
Thanks a lot guys especially , I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
Click to expand...
Click to collapse
Yup because i already went through all these situations and i know the difficulties. That is why i gave you each steps. Always Happy to HELP. :victory:
didnt worked
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
I hv tried to installed from ygdp stock rom but it stopped in between. The process wont complete, plz help me if u can
Micromax q391
My Micromax canvas q391 not working its just stuck on the Micromax logo n I'm not even able to access the recovery mode n does not have the backup of rom
What can I do to start it up please help
Even I tried to Flash with YGDP but no use. My mobile is not stable suddenly and automatically it disconnects from my system even connected with USB Cable.
..
WHen I open the link a page comes up saying " Needrom do not authorizing, the links referred by another website for download the ROMs.
The link must obligatory be clicked from of Needrom.com
"
What should I do....
same problrm faced
headlessNick said:
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Click to expand...
Click to collapse
i had faced same problem ..
but stay calm .. just download ypdp flash tool .. download stock rom and flash it using ypdp tool ... remember while flashing remove the battery otherwise it will not detect the phone , as my was not detected .. but as soon i removed the battery , it flashed the rom in couple of minutes . and after flashing remember to flash a custom rom as the stock rom gets corrupted causing these issues .. installed darkeness redefined rom and it is woking extremely fast , best rom in my opinion . choise is upon you ,
Hope my message helped you , for any more questions do ask.
boot loop
i have the same problem boot loop but im not able to flash becoz my micromax canvas nitro a311 disconnecting continuously on lap im not able to open recovery mode also help:fingers-crossed: