Hi list,
I have installed unofficial cm-10.1-20130303-UNOFFICIAL-i9305.zip to my i9305 and everything seems to work fine, but now i am unable to get adb access to the phone. It is always shows as offline.
[email protected]:~$ adb shell
error: device offline
[email protected]:~$ adb devices
List of devices attached
42f72504764d8f97 offline
I have USB debugging enabled, and tried disconnecting and rebooting the phone, with no success. Any suggestions?
Can't post to the relevant thread as < 10 posts. If someone can please post my question to http://forum.xda-developers.com/showthread.php?t=2157651
Hey,
I am new to this forum myself but have the same ROM installed. Have you checked root access section in development options?
BTW, have the same problem. Have some issues with the rom and can't post in the development forum...
g_kos said:
Hi list,
I have installed unofficial cm-10.1-20130303-UNOFFICIAL-i9305.zip to my i9305 and everything seems to work fine, but now i am unable to get adb access to the phone. It is always shows as offline.
[email protected]:~$ adb shell
error: device offline
[email protected]:~$ adb devices
List of devices attached
42f72504764d8f97 offline
I have USB debugging enabled, and tried disconnecting and rebooting the phone, with no success. Any suggestions?
Can't post to the relevant thread as < 10 posts. If someone can please post my question to http://forum.xda-developers.com/showthread.php?t=2157651
Click to expand...
Click to collapse
root access is set to "Apps and ADB", tried setting to just ADB, it didn't help.
tried connecting via adb via network, the result is the same.
[email protected]:~# adb devices
List of devices attached
42f72504764d8f97 offline
192.168.66.54:5555 offline
ZeeCoach said:
Hey,
I am new to this forum myself but have the same ROM installed. Have you checked root access section in development options?
BTW, have the same problem. Have some issues with the rom and can't post in the development forum...
Click to expand...
Click to collapse
We need to generate 10 posts each, before being allowed into a developer part of the forum, so 7 more for me...
ZeeCoach said:
Hey,
I am new to this forum myself but have the same ROM installed. Have you checked root access section in development options?
BTW, have the same problem. Have some issues with the rom and can't post in the development forum...
Click to expand...
Click to collapse
You need to update adb... Just download the latest Android SDK and use adb 1.6.01 and you'll get a pop up on your phone asking if you want to allow the computer to communicate with the phone, hit yes and you'll be good to go...
Sent from my GT-I9300 using Tapatalk 2
Thanks! it did work!
I had 1.0.29 previously, upgrade to 1.0.31 and it works.
jimbo77 said:
You need to update adb... Just download the latest Android SDK and use adb 1.6.01 and you'll get a pop up on your phone asking if you want to allow the computer to communicate with the phone, hit yes and you'll be good to go...
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Related
All Further updates will be handled in this other thread
Pre Req:
1) Make sure to install Pantech PC Suite as it will install the correct drivers you WILL need
2) Install ADB and Fastboot
How to gain Root
jcase said:
and here is root, you need fastboot and adb
androidpolice.com/2012/04/09/pantech-burst-rooted-and-the-process-is-stupid-easy/
IOMonster saved the day here, without him you would have to wipe your phone and install modified leaked firmware to get root.
Very glad we decided to not release the initial root, sorry
If IOMonster wants to explain he can, I would prefer not to however.
Details
goo.im/devs/jcase/prestoroot.img
adb reboot bootloader
fastboot boot prestoroot.img
once phone boots, reboot it again, install superuser from the market
Click to expand...
Click to collapse
How to Install Clockwork Recovery
Originally Posted by attn1
tau.shadowchild.nl/files/cwm-5.0.2.7-presto.img.zip
unzip
adb reboot bootloader
fastboot flash recovery cwm-5.0.2.7-presto.img
fastboot reboot
Click to expand...
Click to collapse
Press Volume Down and Power when booting to get into recovery
I have no come up with any of this information. I just gathered from the previous post to make it easier to search. I will try and keep this updated that way we can have a quick reference post at the beginning of the thread
Saved for future use
***Will have a Links section once this gets established***
Using adb with Ubuntu Linux - forum.xda-developers.com/showpost.php?p=28041279&postcount=641
Step by Step Root Guide - androidpolice.com/2012/04/09/pantech-burst-rooted-and-the-process-is-stupid-easy/
***Special Thank you goes to:***
jcase
Attn1
IOMonster
bulletproof1013
903tex
jackattack79
sandix
mr72
and everyone I didn't get *will update as we go*
from marcusmarcus
marcusmarcus said:
Here is what I did to get root on mine, maybe it will clear up things for others.
*Note, I am on 64bit Windows so folders will be different on 32bit windows.
On phone:
go to settings > Applications > Development > turn on USB Debugging
On Computer:
1-Download and install Pantech PC Suite from c724062.r62.cf2.rackcdn.com/PantechPCSuite_1.0.10.3314.exe
2-Launch Pantech PC Suite and update if it asks. When PC Suite is fully updated, plug phone into computer until device is recognized.
3-Download and install Android SDK from developer.android.com/sdk/index.html
4-Start SDK Manager and check the box next to “Android SDK Platform-tools” and install package.
5-Download prestoroot.img from dl.dropbox.com/u/9772722/XDA%20Forums/prestoroot.img and save it to “C:\Program Files (x86)\Android\android-sdk\platform-tools”
6-Download cwm-5.0.2.7-presto.img from tau.shadowchild.nl/files/cwm-5.0.2.7-presto.img.zip and save it to “C:\Program Files (x86)\Android\android-sdk\platform-tools” as well
7-Now open your command line and navigate it to “C:\Program Files (x86)\Android\android-sdk\platform-tools” folder
Run the following command
Code:
adb reboot bootloader
When the bootloader screen shows up on your phone then wait a few seconds to make sure your phone is recognized by the computer then run the following command
Code:
fastboot boot prestoroot.img
After phone reboots itself, shut the phone down and turn it back on again.
Then run the following command
Code:
adb reboot bootloader
When the bootloader screen shows up again then type the following commands
Code:
fastboot flash recovery cwm-5.0.2.7-presto.img
fastboot reboot
8-When the phone boots up this time, download the play.google.com/store/apps/details?id=com.noshufou.android.su superuser app[/URL] from Google Play
---------- Post added at 09:10 PM ---------- Previous post was at 09:06 PM ----------
FYI,
I've tried uot.dakra.lt UOT Kitchen couple times so far and have been ale to change the font of the device and the color of the glow for overscrolling but my time and other icons up in the status bar disappeared (the "AT&T" still shows up there though). The Backup and Restore in CWM does work nicely though to get me back to before I installed the zip from UOT Kitchen. I'll try 1 mod at a time using UOT kitchen and see which is making the icons and time disappear from my status bar.
EDIT: I did notice one issue with CWM backups. The backup I did today saved the folder name as "1970-02-22.03.14.56". Some reason the date is wrong in the file naming, should have started with "2012-04-13", right?
Click to expand...
Click to collapse
I hope this helps
For those having trouble with a missing driver I followed the below instructions and installed PDAnet (I did so while in fastboot mode so I could see the drivers install) as soon as it installed and the drivers showed installed. I went back and uninstalled pdanet (leaving the needed drivers behind)
hawkwind212 said:
I solved my problem by referencing to part II of the following page:
theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/Describe
Be sure to download two programs PDANet and USBView (which you may not really need but it's a nice little program).
It's suppose to be "stupid easy" to root PANETCH Burst, but who ever said that left out that it's not so easy if you don't have all the proper driver on your computer. Anyway, so soon after the fastboot mode is brought up, you should notice the computer is telling you a new hardware is found. This is when the burst switches from PANTECH's ADB driver to something else, and only way for the command "fastboot boot prestoroot.img" to work is to find the proper driver for the new hardware call "Android" in the device manager. Now you want to install PDANet, and as soon as the installation process begin, it'll find the driver for the device "Android." and install the driver for you. Once the driver is installed, the installation process will tried to install whole bunch other things into your phone, but I really don't think it can install them in fastboot mode, so you'll probably want to terminate the process. Now type command "fastboot devices" and you should see some kind of output telling you that it's recognize the "Android" device. Now, and only now you can follow the rest of "stupid easy" rooting instruction.
Click to expand...
Click to collapse
Spoiler Alert: Noob question.
Does this method unlocks the phone SIM also?? If not, there is a method to do it??
Thank you
tremeree said:
Spoiler Alert: Noob question.
Does this method unlocks the phone SIM also?? If not, there is a method to do it??
Thank you
Click to expand...
Click to collapse
This method doesnt but sim unlock is currently also being worked on.
Is there a Mac version of any of this software?
Is there a Mac version of any of this software. I understand all of this started on a PC but does that mean Mac users are forever out in the cold ? I own a Pantech Burst and a MacBook Air. I don't have access to a PC nor will I in the future, in so far as being able to use any of the software referenced here.
Any suggestions?
tfranzman said:
Is there a Mac version of any of this software. I understand all of this started on a PC but does that mean Mac users are forever out in the cold ? I own a Pantech Burst and a MacBook Air. I don't have access to a PC nor will I in the future, in so far as being able to use any of the software referenced here.
Any suggestions?
Click to expand...
Click to collapse
What software? Root..?
Cwm?...drivers? Carrier unlock for another provider? Pdl? I'm confused on what your asking...
Sent from my PantechP9070 using xda premium
bulletproof1013 said:
What software? Root..?
Cwm?...drivers? Carrier unlock for another provider? Pdl? I'm confused on what your asking...
Click to expand...
Click to collapse
I think tfranzman is referring to Pantech PC Suite and Android SDK. The Android SDK I believe has a Mac version but I do not think the Pantech PC Suite has a Mac version.
<QUOTE>Download software installed on PC : Click Here
Download MyPhoneExplorer Client App which software installed on Pantech Burst/ Breakout. You must find this from android market or you can read my previous post to get this : Click here
Connect your Pantech Burst/ Breakout device using your USB Cable Data
Please restart your phone and your Computer
After restarting finished, Now launch the installed MyPhoneExplorer Client app on your Pantech Burst/ Breakout and click on OK or Enable and it will connect to the PC Automatically,
Note :
If connection doesnt start or error you can choose another Sync software like Android Sync Manager WiFi.
If you are want Pantech Burst/ Breakout to connect on Mac OS X please follow my previous post : iSync for Mac OS X . I hope you are enjoy with this software.If any problem for downloading ,please contact me anytime</QUOTE>
I don't have a mac so I haven't tested this but this is what I found with google
Any news on CM7/9?? Im already rooted and im just playing around with UOT Kitchen
Let me know, thanks
No news as of yet. there have been people stating they are working on this but we haven't recieved any updates in awhile that I know of atleast. Anyone else reading this please feel free to correct me
All Further updates will be handled in this other thread
tfranzman said:
Is there a Mac version of any of this software. I understand all of this started on a PC but does that mean Mac users are forever out in the cold ? I own a Pantech Burst and a MacBook Air. I don't have access to a PC nor will I in the future, in so far as being able to use any of the software referenced here.
Any suggestions?
Click to expand...
Click to collapse
There is only Windows version of Pantech PC suite. proof
Finn81 said:
There is only Windows version of Pantech PC suite. proof
Click to expand...
Click to collapse
they were asking if any of the software we are using would work on a mac. the answer is yes depending on what software you are refering too. the pantech suite (which has been useless to me with the exception it installed the drivers for me) is windows only. I had actually gotten the drivers originally at work by using pda net. The information I gave above is what I came up with after a quick google search. I'm not sure if that or pdanet for mac would have those drivers.
and again this thread has ended. please follow the links in my Signature (Burst love for discussion or burst essentials for rooting information
I keep tring to root this phone but phone gets stuck in the fastboot mode and does nothing what can i do for this?
sounds like you don't have the fastboot driver installed. all futher questions should be pointed to http://forum.xda-developers.com/showthread.php?p=32885146
kagedws6 said:
sounds like you don't have the fastboot driver installed. all futher questions should be pointed to http://forum.xda-developers.com/showthread.php?p=32885146
Click to expand...
Click to collapse
Can you point me to the right place to get the fastboot driver's please
mobgod said:
Can you point me to the right place to get the fastboot driver's please
Click to expand...
Click to collapse
kagedws6 said:
all futher questions should be pointed to http://forum.xda-developers.com/showthread.php?p=32885146
Click to expand...
Click to collapse
install PDAnet on your computer. it will install the drivers
Hey XDA'rs,
Ive been messing around with building roms and I finally got one to finish(Kindle Fire V1 btw). So I flashed it to the device and tried to boot.
What I get is the backlight to come on and never see the bootlogo. So its hanging. (Not why Im posting)
My question lies in ADB. I want to get a logcat of the device as it boots to see what the problem is.
The rom is 4.2.2 so I know theres the new security prompt to enable access for adb on the device, but does this prevent me from using adb until the device will complete its boot or is there a way to make it work?
All I can get now is for it to show "0123456789ABCDEF offline".
Ill appreciate any help!
Bump
Sn0w17 said:
Hey XDA'rs,
Ive been messing around with building roms and I finally got one to finish(Kindle Fire V1 btw). So I flashed it to the device and tried to boot.
What I get is the backlight to come on and never see the bootlogo. So its hanging. (Not why Im posting)
My question lies in ADB. I want to get a logcat of the device as it boots to see what the problem is.
The rom is 4.2.2 so I know theres the new security prompt to enable access for adb on the device, but does this prevent me from using adb until the device will complete its boot or is there a way to make it work?
All I can get now is for it to show "0123456789ABCDEF offline".
Ill appreciate any help!
Click to expand...
Click to collapse
just went through this this morning too.
short version... make sure you have the newer version of adb installed and running from that directory... replace you older versions.
4.2.2 needs adb.exe 1.0.31 and can be downloaded here for windows pc.
if you have/need Linux or mac versions they are in the index of the folder too here
.
.
Q&A for How to root RCT6773W22 (rca voyager)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for How to root RCT6773W22 (rca voyager). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Google drivers not included
First off I would like to say thank you for the video and the XDA post of how to root these new tablets. I Just bought two of them and am eager to modify them.
I followed all your steps but when I download the SDk it doesn't include any folder with Android USB drivers. WIndows automatically installs a "MTP USB Device" driver. I have tried to download the android USB driver separately else where and windows wont accept it saying it doesn't support it.
I am at a loss of how to get this to work. Kingo Root doesn't see the RCA device at all even though windows does and it is installed 100%. When I unplug the USB cable and back in Kingo searches and searches then says Not Connected.
Any help would be much appreciated
Thank You!
There is a fellow who used iroot on this in the forum. They have a apk app version PR PC version ppl say iroot is easier than kingo. Next a recovery would be great lol
Any luck on rooting RCA RCT6773W22 KitKat 4.4.2?
The last comment on another thread says "Root Master roots this tablet" without a link or anything. I installed the "Root Master" app, but was confused because this is just a "how to" app and it points basically back to the same method that the OP suggested would work.
Put simply I have my device connected to my computer and visible with "adb devices". Both standard google drivers or PDAnet works just fine. Kingo Android Root hangs at "WaitForDeviceTimeout", and basically I have figured out the device is supposed to ask for permission to wipe user data at fastboot screen, but nothing happens.
I'm attempting to get to a point of being able to try out different android mods, and I'm working on an android launcher, so I need to be able to flash a ROM to the device in the event that I program myself into a corner.
Any advice is greatly appreciated.
---------- Post added at 03:49 AM ---------- Previous post was at 03:45 AM ----------
Also, I have tried "adb reboot fastboot" and then "fastboot devices" has the tablet visible and working. Next "fastboot oem unlock" just shows "..." and nothing happens while the device is in fastboot mode. I "cntrl + C" out of fastboot, and then type adb reboot or fastboot reboot and the device comes out of fastboot mode. Still stuck in a loop of no root love.
So once this is rooted is it possible to put a custom boot animation & do exposed framework?
Happy Holidays ppl!!! :sly:
re
Hmm, this method did not work for me and I had to make my own method.
i have ported CRV recovery for this device, i need /proc partition to make scatter
Could someone pull their /proc partition using adb and upload for me please. id like to creat a scatter file forthis device. please anybody.
ive created a working recovery which iv tested on my rca voyager 7 tab, but i now need to crate a scatter file for esy flashing and restoring bricked device.
please anybody, just use adb to pull the /proc partition from the device. zip it and post a link, please and thanks. The recovery iv build is CRVv1.5 for ubifs fylesystem as its the only CRV version which has the back option. The touch does not work with our current kernel.
Are you guys using the newer quad core model?
wont see usb debugging as on
on kingo root, it says usb debugging is not on, but it is. the tab loks like the only driver is rct bla blah blah. i installed the stks but cant get the diver on the tab. and it thinks it is an unspecified device on my windows 7 computer. can someone help me?
You don't need a PC. On tablet goto browser
Type www.aptoide.com
Make sure unknown sources is checked
Install aptoide
Search kingroot install open click green button
Confirm root
FYI
There are up to 5 revisions found so far
V18
V21
V28
V31
V38
This can be found in build info in about device
Some revisions work with Kingo after ota update some don't
Some work with iroot some don't
"Kingroot"
Confirmed to work on the above revisions
Its not supersu but its root and it functions as it should
V28
N
V38
So far have proven dumchar addresses are incorrect
Thru an update for v38 which gave proper addresses
V31 has correct a dumchar
ALL 5 REVISIONS HAVE SLIGHTLY DIFFERENT ADDRESSES DIFFERENT REVISIONS ARE NOT UNIVERSAL
development has been started on v28, v31, v38
Twrp is ready for v31 and v38
Other 2 haven't even started waiting for people to post links to those revisions
sent from my RCT6773W22-V31-1.10.0-TWRP-V2.8.6.0-Compiled-by-Codelover
I have a Question tho
Which of the following do you have to download? I downloaded the one on the right which states sdk appication tools only, so wht do i do after that because im stumbled, and im done nearing the edge to finish rooting my tablet. Thank you for reading.
Download aptoide from aptoide.com
Make sure unknown sources is checked
Install aptoide and now open aptoide search for kingroot in aptoide install kingroot
Open kingroot
Click the green button
You should be rooted
Confirm with root checker
sent from my RCT6773W22-V31-1.10.0-TWRP-V2.8.6.0-Compiled-by-Codelover
synius said:
Download aptoide from aptoide.com
Make sure unknown sources is checked
Install aptoide and now open aptoide search for kingroot in aptoide install kingroot
Open kingroot
Click the green button
You should be rooted
Confirm with root checker
sent from my RCT6773W22-V31-1.10.0-TWRP-V2.8.6.0-Compiled-by-Codelover
Click to expand...
Click to collapse
Sent from my Z981 using XDA Free mobile app
Happy Holidays ppl!:fingers-crossed:
---------- Post added at 02:21 PM ---------- Previous post was at 02:15 PM ----------
So once this is rooted is it possible to put a custom boot animation & do exposed framework? http://www.radyodinletv.com/radyo-voyage-dinle/
Delete
Recently, actually the day after getting a phone, it broke, somehow, while using king root, and I need to fix it quick as possible. Is it possible to flash a new rom onto a phone using the chromebook I have. I need to know quick before I get in trouble.:crying:
H4ck3rz said:
Recently, actually the day after getting a phone, it broke, somehow, while using king root, and I need to fix it quick as possible. Is it possible to flash a new rom onto a phone using the chromebook I have. I need to know quick before I get in trouble.:crying:
Click to expand...
Click to collapse
Hello H4ck3rz,
I have recently purchased a Samsung Chromebook Plus and I also recently got a Nexus 6. I have been looking into how to use fastboot in order to root and rom my Nexus. I have found some promising info on the subject:
I first found this XDA Article that gives more of an overview on enabling ADB and Fastboot on Chrome OS
https://www.xda-developers.com/guide-to-enable-adb-and-fastboot-on-chromeos/
That article refers to an actual XDA guide (tutorial thread) at the very end:
https://forum.xda-developers.com/showthread.php?p=38232908#post38232908
I've read through them both and they seem pretty straight forward. It helps to have a bit of command line knowledge, but the commands used are clear in the instructions.
There is a section in the tutorial that links back to the Chromium Project site where you'll have to find your specific device to learn how to get into developer mode (assuming you don't already know).
NOTE: I have not tried this yet, but I am 100% sure I am going to at some point soon. Probably some time this weekend. After I go through it, I will post again to let you know how it went, if you want to wait to hear about results before you try it.
Hope this helps.
Rk.
Update: I decided I to work on this last night and from the beginning I had problems. TL;DR - adb and fastboot are already part of the developer mode system on my Chromebook Plus. So the need to follow those guides isn't necessary for me.
I was not, however, able to do anything to my Nexus 6 from my Chromebook. Since the Plus only has USB Type-C ports, I bought a USB Type-C to Micro USB cord, but the Nexus wasn't being recognized properly. adb devices returned "????????????" devices, and I didn't get anything with fastboot. I can only surmise that it is the cord, because on my windows laptop, adb and fastboot work flawlessly while my Nexus 6 was connected with the included sync cable.
I'll post again if have more info to share. Sorry I couldn't be of more help.
Rk
rkwarner2 said:
Hello H4ck3rz,
I have recently purchased a Samsung Chromebook Plus and I also recently got a Nexus 6. I have been looking into how to use fastboot in order to root and rom my Nexus. I have found some promising info on the subject:
I first found this XDA Article that gives more of an overview on enabling ADB and Fastboot on Chrome OS
https://www.xda-developers.com/guide-to-enable-adb-and-fastboot-on-chromeos/
That article refers to an actual XDA guide (tutorial thread) at the very end:
https://forum.xda-developers.com/showthread.php?p=38232908#post38232908
I've read through them both and they seem pretty straight forward. It helps to have a bit of command line knowledge, but the commands used are clear in the instructions.
There is a section in the tutorial that links back to the Chromium Project site where you'll have to find your specific device to learn how to get into developer mode (assuming you don't already know).
NOTE: I have not tried this yet, but I am 100% sure I am going to at some point soon. Probably some time this weekend. After I go through it, I will post again to let you know how it went, if you want to wait to hear about results before you try it.
Hope this helps.
Rk.
Click to expand...
Click to collapse
Thanks for this! I can't find my windows laptop and all I have to use now is a Chromebook that does not have adb or fastboot installed. I followed the links and tutorials you shared and was able to install chroot (linux), install adb and fastboot on that linux, and then finally use it to load my phone into fastboot and flash TWRP on my nexus 5. You saved me so much trouble!
i3uu said:
Thanks for this! I can't find my windows laptop and all I have to use now is a Chromebook that does not have adb or fastboot installed. I followed the links and tutorials you shared and was able to install chroot (linux), install adb and fastboot on that linux, and then finally use it to load my phone into fastboot and flash TWRP on my nexus 5. You saved me so much trouble!
Click to expand...
Click to collapse
can you please help me. when I enter 'sudo adb devices' the device is seen. but it says unauthorized. Can you help me with a a step by step write up. I want to flash Android P on to my Pixel 2 XL.
Thanks
Hi,
Can someone help me with finding the USB drivers for realme 1, as of now, connecting it only gives me the option to view files inside normally.
I want to use a couple of adb commands to help certain apps get more info.
Right now, when I type adb devices in windows command it shows no devices connected.
thanks
Can some one please upload the driver pack for oppo realme 1.
Thanks & Regards,
Srinivas Jyotula.
Srinivas Jyotula said:
Can some one please upload the driver pack for oppo realme 1.
Thanks & Regards,
Srinivas Jyotula.
Click to expand...
Click to collapse
Make sure you have latest ADB tools for adb devices to work
vinumsv said:
Make sure you have latest ADB tools for adb devices to work
Click to expand...
Click to collapse
Thanks, I have something called minimal adb and fastboot which worked for me being able to connect my other device.
Any suggestions or thing I can check?
deepakgaba14 said:
Thanks, I have something called minimal adb and fastboot which worked for me being able to connect my other device.
Any suggestions or thing I can check?
Click to expand...
Click to collapse
https://developer.android.com/studio/releases/platform-tools
Not bad idea, the one way is better than oldest.
Despite having a lot of ways, we have been looking which one will be having all the information.