Related
I've tried to install Cyanogenmod 9 on my Xperia Sola, I've unlocked bootloader official way, flashed kernel from this forum specialy made for sola (http://forum.xda-developers.com/showthread.php?p=28957468&postcount=412 This One), then boot.img of cyanogenmod 9 (FXP203) and...
When I want to do anything with phone, it just flashes my red led. I mean, that led is still on, when I press Power it just turn off. And when I try to connect my phone in fastboot mode, It don't react at all. Can I already throw it away through window?
I put it under a charger to see if it's just off energy, but i've noticed, that after a while, red led just turns off and that's all.
My god, help me or I'll be back on Nokia 3310
You've used the S kernel, not the Sola.
Download the FXP for Sola (Pepper) here;
http://forum.xda-developers.com/showthread.php?t=1876929
Flash boot.img via fastboot. To get in, hold vol up + power. Wait for 3 vibrations.
Hold vol up. Then jam the USB cable in. You should be in fastboot.
Alternatively, flash the stock sola ftf via flashboot.
Problem is, my phone does not react, it does not vibrate, just that red led is on or off. Nothing else. I've tried all of those combinations. I can't get to fastboot mode or anything else.
MelaPL said:
Problem is, my phone does not react, it does not vibrate, just that red led is on or off. Nothing else. I've tried all of those combinations. I can't get to fastboot mode or anything else.
Click to expand...
Click to collapse
Happened to me (I use Xperia GO). What I did is (as mentioned above) - Hold the power button and Volume Up button for sometime (it vibrates once after a few seconds, do not leave the buttons - continue to do so and after a few more seconds until 3 vibrations) and then the phone switches off. Now, hold the Volume Up button and plug in the USB cable - you'd be able to get in the fastboot mode. Flash a stock kernal and that should help.
If your phone is completely down (no charge at all), then above won't help. Plugin the charger and and wait for a few mins (before the red light goes off - you should now have a good knowledge on when the light goes off!) and try then try the above step. Once the 3 vibration comes, remove the charger and go ahead with the flash mode.
Hope this helps!
Thanks,
B.
Edit: By the way, I had my SIM Card and Memory card inserted in the phone when the phone was completely down without any charge. I don't know how, but it makes a difference with you try so (atleast in my case) with them.
If it does not vibrate, then it's a hard brick =\ You need the phone to be at least partially responsive to get into fastboot/flashboot.
Keep holding down. It should vibrate after 25 seconds or so.
Otherwise, you have to bring it to Sony and tell them their phone died on you.
Right now It dosen't even blink with Led. It's totaly down. I cant lock fbootloader, so I'm doomned. Hope that won't cost much...
Install Sony Update Service (SUS) and try to recover your phone from there.
Last shot here, but here's to hoping that the PC at least detects your phone.
Otherwise.... Yeah =\
If you unlocked your bootloader Pc companion will be useless for you cause it will not detect your phone,.,,
i think other way is to flash the stock ftf for you device using flashtool.... that wuld be the best shot for you...
please respond if this fix your problem
No, SUS will detect, but will refuse to flash. It will say "Phone has been modified".
Need to see whether it's a hard brick. If even SUS does not recognise, then bring it to Sony =\
None of the above works. It's just dead and sometimes flashes red light. PC Companion says that there's no phone connected. Hope I will be able to gain a varranty or I'll be on Nokia 3310. But I'm not verry cheerful about that...
Flashtool does not react when I plug in my phone in fastboot or flash.
Hey bro,
Its highly unlikely for hardbrick to happen to Sony phones by flashing a differnt Kernel when Flashtool is there Pretty sure that it ought to work, follow the steps below (Note that the order of usb cable connection is the most important thing as doing it wrong will not allow Flashtool to connect to the phone when its bricked ! )
First, try plugging it in to charger for a while to ensure that there's some charge. Follow up with the Vol and power Button to make sure its turned off. Then after that follow this procedure *exactly*
1) Prepare Flashtool and select the FTF. (Flashmode )
2) When flashtool asks yo to connect the phone, connect the USB cable to PC
3) Then, holding down ONLY the Vol Down button (No Power button, Note that ) connect the phone to the USB cable and in a few seconds, Flashtool will start flashing
I know you tried many variations but missing out on one or the other detail during your previous tries might have caused the lack of success Just try it and let us know what happens
Best of luck and hope you dont have to go to Nokia World !
Cheers
Nope, it's still not working. It just dosent detect phone. I'm pluging in, holding only volume key and I'm waiting 5 minutes - nothing happend.
Nokia 5530 for now, but come one...
Hi,
I am currently having the same problem (I have bricked my sola by flashing with fxp boot.img). After digging the internet I found out that you can start fastboot by:
1. holding all 3 buttons (power on, volume +, volume -)
2. the phone will vibrate
3. the phone will vibrate 3 times
4. release the buttons
5. hold the volume + button and plug in the cable
6. you should be in fastboot now (blue light on)
If fastboot does not work then do 1-4 3x. Good luck! Hopefully we will unbrick our phones
Br,
Wermesz
wermesz said:
Hi,
I am currently having the same problem (I have bricked my sola by flashing with fxp boot.img). After digging the internet I found out that you can start fastboot by:
1. holding all 3 buttons (power on, volume +, volume -)
2. the phone will vibrate
3. the phone will vibrate 3 times
4. release the buttons
5. hold the volume + button and plug in the cable
6. you should be in fastboot now (blue light on)
If fastboot does not work then do 1-4 3x. Good luck! Hopefully we will unbrick our phones
Br,
Wermesz
Click to expand...
Click to collapse
Lol things u get on the internet!!!
First there is no such key combination to start fastboot k so just dun break ur buttons in an attempt to start it ...
Steps 1,2&3 are steps to get ur device force restart and force shutdown and let me tell you one thing
step 1 is wrong it power button and volume + button. That's it first the phone will vibrate once for force restart and if u keep pressing it will bypass over to force shutdown which is indicated by 3 vibrations..
Sent from my Xperia Sola using xda premium
could work
I have a Xperia U and triying to port JB to it I briked two or three times.
I hold power botom and it vibrate and doesnt happen anything ok.?¿
The possible solution could be this(for my works)
Charge the phone like 1 hour for my doesnt charge with the animation but its for security.
With the nest steps you are going to lose all CWM and tweaks and apks but personal data still there.
You have two options:
Flash a new rom with flashtool, but when you pluged with volum - you hold it for allmost all process becose for my i conect to PC and its goes quikly so i cant do annything.
If the phone is not recognised by Flashtool:
You have to repair it with PC Companion or Bridge for Mac, and also the same hold volum - almost all process.
For my it works, tell my if for you works:cyclops::cyclops::cyclops:
Hi,
it worked !
after doing the steps I have posted earlier I managed to flash my xperia sola with the right boot.img (the one from fxp pepper) and install fxp via CWM. Should work for you too.
One tip: you have to remove the assert from fxp installation script.
Br,
Wermesz
@op, your battery is dead and isn't accepting any external charge. Try replacing your battery with a charged one. That is if sola supports user replaceable batteries.
Sent from my ST25i using xda app-developers app
So my phone was in bootloop and i tried to flash new room (stock one) after that phone died (due low battery) and now i cant trun it on :/ only red flashing light apear when i conect it to pc/wall charger and still cant turn on i tried that someone said to let it be for 10 mins after that to hold all keys (volume up + down + power) to calibrate power cell but still no luck.
I have another one htc onex+ but for that i fixed my issue if only i could turn it on so i can get into bootloadeer run my script to charge battery for a bit and then flash right room and install stock room.
Realy please help me out here.
i realy need help
Btw phpne gets warm when i stcuk it in charger but no responsse at pc side so cant realy do anything from pc right now.i just need a way t turn it on
Try with a normal charger.
tapatalked
hi guys, as i stated in my title, when i charge it keep blinking red led(whenever i charge), won't connect to the pc, and i've charged it for at least 4 hours i have tried evry thing( power+ vol up) and hard reset at sd slot but nothing can change it now
it may got in some water(but not that many times, only rain, etc) and it keep restarting, and wont comeback to life, i can use for a few minutes, and at that time, i cant seem to charge my phone, and when i hard reset (power+up) it keep restarting until this point, and guys, i bring it to xperia care but they seems tobe helpless, i hope you understand what im saying, btw english is my 2nd language
Can you get to FastBoot Mode (With the phone off, plug it into the PC's USB port and immediately press & hold the UP volume key, the LED should go from Red to solid Blue.) If yes, Run Flashtool (installing it first, if necessary) and try to get to Flashmode (With the phone off, plug it into the PC's USB port and immediately press & hold the DOWN volume key, the LED should go from Red to off, but Flashtool will tell you that the phone is connected in FlashMode)
Have you flashed anything? The usual cause for the red flashing LED is by flashing a ROM or Kernel when you haven't unlocked the bootloader first.
OK, there are some ROMs and kernels which can be flashed on a locked bootloader.
Download an FTF for your phone from the FTF repository thread, and flash it using Flashtool.
Tunki said:
hi guys, as i stated in my title, when i charge it keep blinking red led(whenever i charge), won't connect to the pc, and i've charged it for at least 4 hours i have tried evry thing( power+ vol up) and hard reset at sd slot but nothing can change it now
it may got in some water(but not that many times, only rain, etc) and it keep restarting, and wont comeback to life, i can use for a few minutes, and at that time, i cant seem to charge my phone, and when i hard reset (power+up) it keep restarting until this point, and guys, i bring it to xperia care but they seems tobe helpless, i hope you understand what im saying, btw english is my 2nd language
Click to expand...
Click to collapse
Before flashing, have you tried charging the phone through your computer's USB? See if that works.
Hi to all.
I have a big trouble.
I used the Fu**ing application LagFix (fstrim) (Play store Link: http://play.google.com/store/apps/de...y.lagfix&hl=it ),that before worked normally on my old Xperia S, on my Xperia Tablet S (SGPT121 wifi only,with last official firmware with root) and after 3-5 minutes that application start working tablet shut down.
Now led of charging doesn't work when I plug in the charger and Tablet doesn't start.
If I try to enter in recovery (Power button + Volume up) nothing appear except status led that give a white light for a second and nothing more.
After many try I also disconnected the battery but not good result received.
Pc Companion don't recognize tablet.
I also looked the unbrick metod with SD card,but ask to enter in recovery mode but is not possible for me cause tablet doesn't start,only white light give sign of life...
I must really say goodbye to my tablet? ( T_T)
Thanks.
Hey guys,
I had purchased this phone awhile back in 2012 and The model is: XT912. I had rooted it and installed a Custom Rom (Black Widow). The reason why I stopped using it was because I had a cracked screen so I upgraded to a different phone but having alot of issues with my new phone. So I decided to replace my screen for my Droid Razr, but its been awhile since i've used it and been experiencing issues of my phone not booting up and looked online for multiple solutions but no luck.
Issues are:
- Phone needs a USB Wall Charger to be able to be turned on, battery is charged fully but when I unplug my USB Charger, my phone turns off. When I try to attempt to do a fastboot session, I connect my Stock Motorola USB Cable to my PC and on my phone, it shows a white light. But when plugged in to a wall charger, my phone boots up but doesn't boot anywhere besides the motorola logo.
- My phone boots up, shows the motorola logo and goes straight to battery charge and it shows 0% then 5% then 100% sits there for about 3 minutes and then reboots.
- When trying to go into recovery, it stays on the motorola and i've left it there for 24 hours abd no luck.
I've tried multiple things, but its been very aggravating since I've been trying to look up solutions for the past week but still had no luck.
Please help =(
BLACKDETH32 said:
Hey guys,
I had purchased this phone awhile back in 2012 and The model is: XT912. I had rooted it and installed a Custom Rom (Black Widow). The reason why I stopped using it was because I had a cracked screen so I upgraded to a different phone but having alot of issues with my new phone. So I decided to replace my screen for my Droid Razr, but its been awhile since i've used it and been experiencing issues of my phone not booting up and looked online for multiple solutions but no luck.
Issues are:
- Phone needs a USB Wall Charger to be able to be turned on, battery is charged fully but when I unplug my USB Charger, my phone turns off. When I try to attempt to do a fastboot session, I connect my Stock Motorola USB Cable to my PC and on my phone, it shows a white light. But when plugged in to a wall charger, my phone boots up but doesn't boot anywhere besides the motorola logo.
- My phone boots up, shows the motorola logo and goes straight to battery charge and it shows 0% then 5% then 100% sits there for about 3 minutes and then reboots.
- When trying to go into recovery, it stays on the motorola and i've left it there for 24 hours abd no luck.
I've tried multiple things, but its been very aggravating since I've been trying to look up solutions for the past week but still had no luck.
Please help =(
Click to expand...
Click to collapse
The white light means that your battery is empty,try this:
Booting from AP fastboot to charging mode
If the Device will only boot to AP Fastboot and it says Battery Low
Connect the phone/Device ato a Wall Charger (not PC)
-In AP Fastboot Mode hold Volume down& power buttons at the same time for +10 seconds
- When screen goes black...release power button
-Then IMMEDIATELY press and hold Vol - and Vol+ to boot to Boot Menu.
- In Boot Menu scroll down with volume down to BP Tools, press volume up to select
- Device should boot to Charging Mode with battery icon
- Once battery is charged, try flashing in AP Fastboot again
This will only work if battery charging Firmware is still present and not corrupted
If Motorola Device will not boot to Charging Mode, a Fastboot cable will be needed.
You can buy it or you can make one by yourself,look at the picture.
If you can boot to AP Fastboot mode use this utility to flash stock rom,here http://forum.xda-developers.com/droid-razr/development/droid-razr-utility-xt913-jellybean-t2861798
If nothing works maybe your battery needs replacement...
welder73 said:
The white light means that your battery is empty,try this:
Booting from AP fastboot to charging mode
If the Device will only boot to AP Fastboot and it says Battery Low
Connect the phone/Device ato a Wall Charger (not PC)
-In AP Fastboot Mode hold Volume down& power buttons at the same time for +10 seconds
- When screen goes black...release power button
-Then IMMEDIATELY press and hold Vol - and Vol+ to boot to Boot Menu.
- In Boot Menu scroll down with volume down to BP Tools, press volume up to select
- Device should boot to Charging Mode with battery icon
- Once battery is charged, try flashing in AP Fastboot again
This will only work if battery charging Firmware is still present and not corrupted
If Motorola Device will not boot to Charging Mode, a Fastboot cable will be needed.
You can buy it or you can make one by yourself,look at the picture.
If you can boot to AP Fastboot mode use this utility to flash stock rom,here http://forum.xda-developers.com/droid-razr/development/droid-razr-utility-xt913-jellybean-t2861798
If nothing works maybe your battery needs replacement...
Click to expand...
Click to collapse
I've tried the troubleshooting steps mentioned above but no luck.
What I remember is that, back in the day when I installed the ROM, I wiped everything, incl. the Recovery partition and I believe android version it was on was ICS. When I installed Black Widow, everytime i would reboot it, i had to turn it on a certain way, sort of like safe mode. I've tried it though but no luck
Also, everytime I do plug in a charger, It does show a charge of 100% but once I unplug the USB, it turns off and the only way to turn it back on is plugging the USB back in.
I've also created the cable you've mentioned, but it still shows a white light when plugged into a PC. I've already replaced the battery and the battery is brand new. Just replaced it yesterday.
Any other suggestions? Is there a way to fastboot it so i can install a stock rom with the OTA?
Thanks.
BLACKDETH32 said:
I've tried the troubleshooting steps mentioned above but no luck.
What I remember is that, back in the day when I installed the ROM, I wiped everything, incl. the Recovery partition and I believe android version it was on was ICS. When I installed Black Widow, everytime i would reboot it, i had to turn it on a certain way, sort of like safe mode. I've tried it though but no luck
Also, everytime I do plug in a charger, It does show a charge of 100% but once I unplug the USB, it turns off and the only way to turn it back on is plugging the USB back in.
I've also created the cable you've mentioned, but it still shows a white light when plugged into a PC. I've already replaced the battery and the battery is brand new. Just replaced it yesterday.
Any other suggestions? Is there a way to fastboot it so i can install a stock rom with the OTA?
Thanks.
Click to expand...
Click to collapse
You can't charge the phone with the fastboot cable,it is for flashing the stock rom with RSD Lite when your battery is low.
Here is everything you need
http://forum.xda-developers.com/showthread.php?t=3023837
Download Motorola drivers,RSD Lite,appropriate sbf file for your region and flash it.
Oh,use Windows 7,not Windows 8
Edit:
Use this utility because you have XT912
http://forum.xda-developers.com/showthread.php?t=2861798
Sent from my Razr XT910
I actually got it to boot up, but turns right back off. How do you boot it up into safe mode when the phone is off?
BLACKDETH32 said:
I actually got it to boot up, but turns right back off. How do you boot it up into safe mode when the phone is off?
Click to expand...
Click to collapse
Ok, So I was able to get to the Boot Logo usuing HW Diag. and Boot AP and my screen would show safe mode activated, then it would boot up a logo and I believe its cyanogen mod. It has a Blue Droid with a ring circling around it, but then it restarts. Maybe if i'm able to boot it into safe mode from the beginning, i could start it up.
How do I boot it into safe mode when the phone is off?
Thanks.
BLACKDETH32 said:
Ok, So I was able to get to the Boot Logo usuing HW Diag. and Boot AP and my screen would show safe mode activated, then it would boot up a logo and I believe its cyanogen mod. It has a Blue Droid with a ring circling around it, but then it restarts. Maybe if i'm able to boot it into safe mode from the beginning, i could start it up.
How do I boot it into safe mode when the phone is off?
Thanks.
Click to expand...
Click to collapse
Power the Device Up in Safe Mode - DROID RAZR / RAZR MAXX by MOTOROLA