Hey, guys. I woke up this morning, and I didn't have audio on my phone. I rebooted, and now my phone is sitting indefinitely at the CM9 loading screen and will not move past. I've let it sit for half an hour, and nothing. I've pulled the battery three times...nothing.
I figure the best thing I can do is figure out somehow to get back to stock, but my issue right now is that I can't find a stock ICS ROM from AT&T, only GB. And even if I did, I'm not sure exactly what to do since the phone is stuck booting.
Any ideas?
Thanks a ton.
You can always go back to stock 2.3 and upgrade to ICS through Kies. Are you able to get into download mode?
Hold both volume buttons down while turning on the phone.
Keep holding until your recovery screen appears.
Wipe cache and dalvich, reflash same ROM.
A factory reset from recovery, upgrade your recovery. . .
Related
So I've been using Kang's ICS preview for about a week, and I really liked it, except from some bugs such as freezing after not using it for a few hours.
Today when I got back from school, (not used the tab for 7 hours) I tried to turn it on but I couldnt get past the loading screen, so I turned it off by holding the power button for a few secs.
Now I just cant get it to load up normaly, its just goes to the bootscreen, stucks, then its impossible to turn it off.
I tried going in to CWM and wipe data/cache but that freezes too.
Is there any other way to wipe it and install another rom like Overcome?
Mine did this as well. It would hit the Samsung loading screen and never go any further. I basically had to unroot it and take it back to stock via ODIN. Hopefully this works for you.
Hit up this link and download the big blue link at the top labeled DOWNLOAD:
http://forum.xda-developers.com/showthread.php?t=1474971&highlight=odin
Follow the directions to get into the Download Mode, then jump down the unrooting part.
After its done with the download it will reboot automatically. Soon as it does this make the tablet go into Recovery Mode. It should go through a script and reboot automaticly. Again don't let it boot normally, make it go into Recovery Mode. I think it took a few times for me and then it eventually went into Recovery. I then did a factory reset and rebooted. Now I have an unrooted Samsung firmware. Back to scratch though, but fine with me! I was getting worried I wouldn't be able to get it back.
Oh...and this process will wipe your internal memory as well.
I attempted to flash MIUI.us V4 2.6.8 Atrix ByTeamMotoTegra today, and was almost successful, but I found out that I shouldn't have wiped the phone before flashing. I lost the touch functionality, and couldn't select my language. I flashed my old ROM (Neutrino) to try to flash back to MIUI, but still could not seem to get the touch funcationality.
After a few times of taking out the battery and trying to get the MIUI ROM working, I ran into a boot loop. The screen will not go past the screen with the red logo, no matter what I do. If I hold the volume up/down buttons, "starting RSD protocol support" appears, but nothing else happens. The phone just keeps turning off, then returning to the screen with the red logo. Any ideas on how to get past this screen?
i have a similar problem, i rooted and unlocked a friend atrix today on 2.3.6 version 4.5.141
it went fine and booted normally. i then went into cwm and made a mistake by not making a backup, cleared data cache and dalvik then proceeded to flash aokp. it booted but didnt go past the motorola dual core screen while still displaying unlocked. i can still go to fastboot and even into cwm as i have attempted to flash other roms after clearing all things out again but nothing is going past the boot screen.
any suggestions?
I can scroll through the other CWM menu options, but I can't boot up or anything else. Anytime I select one of the options, it will either just restart and go back to the red logo screen, or say I don't have enough battery life to flash. My battery is now completely dead and doesn't seem to be charging at all, even though it's been plugged in all night.
My gf's phone finally got the ICS OTA this morning and i managed to root it with no problems.
I was going to try out a new rom so i went through the safestrap process. Upon switching to safe mode, and trying a reboot, i get the menu to continue like normal, but then just a black screen.
I ended up having to force reset with the power and volume down button to get back to recovery. I was able to switch back to unsafe and successfully boot (thank god she woulda killed me if i bricked it or had to SBF lol).
Im curious why it did that tho, because obviously it needs to be in safe mode to rom.
Only thing i managed to find while searching was to update busybox but that didnt help.
vaeevictiss said:
My gf's phone finally got the ICS OTA this morning and i managed to root it with no problems.
I was going to try out a new rom so i went through the safestrap process. Upon switching to safe mode, and trying a reboot, i get the menu to continue like normal, but then just a black screen.
I ended up having to force reset with the power and volume down button to get back to recovery. I was able to switch back to unsafe and successfully boot (thank god she woulda killed me if i bricked it or had to SBF lol).
Im curious why it did that tho, because obviously it needs to be in safe mode to rom.
Only thing i managed to find while searching was to update busybox but that didnt help.
Click to expand...
Click to collapse
It was probably plugged into the charger, Safestrap has known issues with not going into recovery while on charge.
Is their any other ideas I have run into the same thing with my XT910 with the CM10 build
I went from Shostock2 ICS to Shostock Gingerbread--flashed through recovery, everything seemed fine, rebooted a couple of hours later and the phone froze at the "Samsung Galaxy S II" screen. As of now I have NOT been able to get back into recovery though the volume rocker/power method ... Nothing happens at all. Half the time my phone wont boot, period, but if I pull the battery and put it back it will boot the first time into that same screen. Not at home so I can't connect it to my computer but if I can't boot into recovery not sure how I'm going to get my PC to recognize the phone .... (sigh.)
Please advise.
EDIT: Finally managed to get into recovery via volume rocker ... Don't know why it worked this time after failing over and over before. Have reflashed the Gingerbread zip ... Keeping my fingers crossed that it works out.
Haints said:
I went from Shostock2 ICS to Shostock Gingerbread--flashed through recovery, everything seemed fine, rebooted a couple of hours later and the phone froze at the "Samsung Galaxy S II" screen. As of now I have NOT been able to get back into recovery though the volume rocker/power method ... Nothing happens at all. Half the time my phone wont boot, period, but if I pull the battery and put it back it will boot the first time into that same screen. Not at home so I can't connect it to my computer but if I can't boot into recovery not sure how I'm going to get my PC to recognize the phone .... (sigh.)
Please advise.
EDIT: Finally managed to get into recovery via volume rocker ... Don't know why it worked this time after failing over and over before. Have reflashed the Gingerbread zip ... Keeping my fingers crossed that it works out.
Click to expand...
Click to collapse
Boot into recovery and wipe data/factory reset, that should get it to boot after you flash the GB zip!
I know i read this somewhere in the original sl jb rom but cant find it anymore. i was currently running the new jb rom modeled after the ota update with the lgpnst. I accidenlty ran my phone dead for the first time ever. i now can not get my phone to bootup, it will show my desktop for a brief second than bootoff animation than battery charge screen. i can still access download/recovery/bootloader menu's so i wiped everything, tried reflashing, got the optimizing screen, finished , bootoff animation, than charging screen, so than i flashed the original sl jb rom, same thing, than i flashed the noctorunal 2.0 , same thing, mind you these were all clean wipes in between, they are being flashed because the boot screens change, so i really need my phone, im a locksmith and on call 24/7 i know im dumb for messing with my phone when i need it to work, but i have had no problems till a ran it dead.
Sorry i figured it out, through all my attempts, i figured out what i needed to do, i had to charge my phone in recovery mode to 11% and than i rebooted to system and finally got it to load. It would not charge on the charge screen for some reason it might have though in dl mode or bootloader. I hope this helps someone in the future you probably dont need to wipe and reflash everything. but if you kill your phone, plug it in, hold power plus vol + once bootloader comes up hit vol- twice and press power button, this will bring up recovery, watch to make sure its showing + next to the battery percentage. this may not work for all, but it worked for me.