Hi everyone
Just wondering if you guys could give me any suggestions on what to do.
I bought what was labelled as a S007S recently, it's a 5" Note 2 clone which runs MTK 6577 and although it's been a bit buggy it is still usable and quite fun to just mess about with. However today when I connected the phone onto my PC it didn't recognize the device. All it says on the phone is "Charger has been linked" as a brief message but then disappears. It doesn't give me the usual menu to select USB Mass Storage Mode in the notification bar anymore.
I've tried a factory reset, changing computers which run W7 & W8 respectively and both should have drivers installed as I've used them to connect the phone previously, changing USB cables, pulling the battery, trying USB debug mode, and also tried a few apps on the market that attempt to mount storage.
I've tested the other phones such as HTC One X , Samsung S3 i9300, and Gnex and they are all fine.
I'm quite stumped as to what to do so hoping someone could give me some pointers, I did have a search through XDA for similar issue but seem to have only found older android devices or inconclusive stuff, if I missed a thread please link me
Any help would be appreciated!
Some Info:
Model Number: e1901_v77_jdt1_9p017
Android Version 4.1.1
Kernel: 3.4.0 [email protected])) #1 SMP PREEMPT
Build Number: e1901_v77_jdt1_9p017_20121123
Gentle Nudge
Is yours FWVGA or QHD?
Have you enabled the USB Fast Charging?? If fast charging is enabled, then your phone will only charge when connected to your pc..
Hi all i have exactly the same problem do any of you know any way out please ?
Related
Hello guys
Not a major problem but ever since I've installed cfw on my galaxy s2, I get a blue screen come up on my laptop then automatically shuts down when connected through usb. The phone recognises the connection as the blue android icon shows up, as soon as I press connect on the phone, my laptop freaks out, jumps to a blue screen, does some checks then reboots. Wtf is going on with my phone? Please someone help, I can't stand using kies it's super slow. Laptop is running crappy vista 32bit btw.
Cheers
Anyone?
Galaxy S2 I9100 Android version: 2.3.5 Baseband: I9100XXKE7 Kernal: 2.6.35.11-ninmphetamine-2.0.5+ [email protected] #20 Build: villainrom 3.0 Theme: Clear Glass 1.5
Most definately driver errors. First, turn off Usb Debugging in phones settings. (Application - development for htcs)
This might stop ur pc from trying to load faulty drivers.
If not, Google how to "show disconnected devices in device manager". Follow that way to delete any Unknown or Android usb device from your compy.
HTC Desire AMOLED
Stock hboot / s-off
4ExtRecovery / 16Gb Class6
RunnymedeMod007 v6
Thanks for the tips asestar.
I looked at the the error report after the system restarted and it was actually my acronis true image backup software that was causing the system to crash, possibly on trying to access the phones internal storage to backup, as I had acronis set to backup on the fly. I've since uninstalled acronis and it's connecting without any problems now.
Good to know you got it fixed!
HTC Desire AMOLED
Stock hboot / s-off
4ExtRecovery / 16Gb Class6
RunnymedeMod007 v7
OK first off I have been searching for a couple of days now for a way to root my phone.
Here are the details of my phone
hardware version - I500.04
model number - sch-I500
firmware version - 2.3.5
base-band version - S:i500.04 V.EH03
Kernel version - 2.6.35.7
my computer is a Asus K53E
antivirus kaspersky
also have tried on Asus U50F
antivirus Norton 360
Bother computers are running windows 7
I have followed these instructions off this page [galaxyforums how-root-froyo-gingerbread-your-fascinate. also download and redownload the driver off the samsung page for this phone. restarted both phone and computer. I can connect through KIES with no problem but don't know if and how to root through kies.
Still I have not been able to connect my phone to either of my computers. I have tried with debugging on and off, mounted sd and with out, usb settings both on mass storage and media sync. I am lost please someone help. usually I can't just google my issues and work them out with out help that is why I don't have a mass amount of post.
my phone will show---- usb mass storage-----
usb storage in use
smoking91awd said:
OK first off I have been searching for a couple of days now for a way to root my phone.
Here are the details of my phone
hardware version - I500.04
model number - sch-I500
firmware version - 2.3.5
base-band version - S:i500.04 V.EH03
Kernel version - 2.6.35.7
my computer is a Asus K53E
antivirus kaspersky
also have tried on Asus U50F
antivirus Norton 360
Bother computers are running windows 7
I have followed these instructions off this page [galaxyforums how-root-froyo-gingerbread-your-fascinate. also download and redownload the driver off the samsung page for this phone. restarted both phone and computer. I can connect through KIES with no problem but don't know if and how to root through kies.
Still I have not been able to connect my phone to either of my computers. I have tried with debugging on and off, mounted sd and with out, usb settings both on mass storage and media sync. I am lost please someone help. usually I can't just google my issues and work them out with out help that is why I don't have a mass amount of post.
my phone will show---- usb mass storage-----
usb storage in use
Click to expand...
Click to collapse
Solved----- USB port was the issue:good: am now rooted and looking for a rom to install.
AOKP MS6 or AOKP nightly JB builds
I upgraded my Original Samsung Galaxy Tab (GT-P1000) from the old Android version that came with it when I purchased it about in 2011 to ICS 4.0.4 by flashing the AOKP ROM Build #40 (as described in the post - Samsung Galaxy Tab GT-P1000: Upgrading to Android 4.0.4 via AOKP ROM Build 40).
Everything works fine in the new system except the USB connection. Before I upgraded, I had the necessary drivers on my laptop via Samsung Kies and I was able to tether via USB, debug via USB as well as access the Tab as USB storage from my PC. All of this USB functionality stopped working after the upgrade. The same laptop does not even detect the USB cable inserted anymore. I don't even get a prompt on my table after what I want to do with the USB connection once it is connected to the laptop.
The USB tethering setting is always disabled even after the USB cable is connected.
I was about to start App development and this usb problem is giving me sleepless nights as all means to search for a solution is not giving me any results. Thanks in advance for reading my post and providing your inputs. Much appreciated.
Current System Information:
Model Number: GT-P1000
Android Version: 4.0.4
Baseband Version: P1000XXJPZ
Kernel Version:
2.6.35.13-g62458c1-dirty
[email protected] #7
Sun Jul 1 22:55:19 EST 2012
Build Number: IMM76I
Mod version: aokp_p1_build_40
I have got the same problem with cm 10.1. Did you find a solution?
Re-installing back to stock rom seems to solve the problem.
Let me know.
I jave the exact same problem too.
eazydazit said:
I have got the same problem with cm 10.1. Did you find a solution?
Re-installing back to stock rom seems to solve the problem.
Let me know.
Click to expand...
Click to collapse
So how do you restore to stock if USB won't work?
I have tha same problem
I have tha same problem anyone that can help me?
windows does not recognise the tablet and i can't turn recovery or download mode "ON"
Model #: Samsung-SGH-I997
Firmware Version: 2.3.6
Baseband version: I997UCLB3
Kernel Version: 2.6.35.7-I997UCLB3-CL977492
Build#: Gingerbread.UCLB3
I'm going to give you guys a little back history on what i have done to my phone already.
Ran Odin3 v1.7 Unbrick Success
Tried rooting with SuperoneClick Failure stuck at step 7 Waiting for device than the program stops responding
Tried going to setting>applications> development>(x) Debugging before connecting to computer usb port NUMEROUS TIMES (DOES NOT WORK SHOWS USB CONNECTED BUT NOT USB DEBUGGING) * gets frustrating after awhile hoping something will work the 3rd or 5th time for some reason....
Tried Kies (firmware update) kies mini just loads for ever. I mean like for ever... hours and hours... with no results. it is clearly detected because the model number is shown under devices in kies mini.
Mass storage works grrrreat! lol
Please someone, anyone show me how to fix this. If more details about the situation is needed ask, i will try my best to give a ideal response
Thank you
Thank the lawd for this thread
All i wanted was to root my samsung infuse 4g with out having to go through that debugging mode crap. a Huge thank you to this guy
http://forum.xda-developers.com/showthread.php?t=1613523&nocache=1
Hope this helps those who are suffering from the dis functional debugging mode syndrome as much as it did to me.
Hello all, I am currently having a issue with my GS3 after accidentally installing the 4.3 update to my phone last night. I have been telling it no for the past 5 months, and last night I just hit the wrong thing. So this morning I came onto the forums to see about rooting the phone finally only to see that it can no longer connect to my PC. I also tried it on my laptop, only to find the same thing. The phone no longer even shows up in the device manger. However it is still accepting a charge from the USB port.
Phone Specs:
Model Number: SCH-I535
Andorid Version: 4.3
Baseband Version: I535VRUCML1
Kernel Version: 3.0.31
[email protected] #1
Wed Dec 11 01:109:13 KST 2013
Build Number: JSS15J.535VRUCML1
Hardware Version I535.10
I have tried searching around on google, and have done the following things, uninstalled the Samsung Drivers, and then ran drivercleanup and re-installed the drivers. Tried various USB ports/other known working USB cables. Reset the phone back to factory defaults, and cleared the cache. I also tried turning DM Mode on via the ##366633# menu. I uninstalled my USB controller just for giggles, but have gotten no where. Both computers are running Windows 7 X64, and neither of them see the phone in the device manager. I also booted the phone up and tried using the download mode to see if Windows would detect it, however it did not. If anyone has any thoughts that would be truly fantastic. I don't care to copy data to and from my computer via airdroid or any of the other file sharing apps, I just would have liked to have rooted the phone ect .
-Thanks
Matt.
Wrong forum, this is for the i9300 only.
Sent from my GT-I9300 using Tapatalk