So today I wanted to unlock my Phone with the PIN-Code, suddenly the resolution of the Samsung Galaxy S3 changed to a minimal resoultion and went to the top of the Screen, I couldn't restart because I didn't see the Power-Off "function".
So I took the battery out of the phone, waited some time, and put it back in, then there was the same problem and I couldn't do anything, so I thought it's maybe a Software Issue, so I went to the Download-Mode (Volume Down + Home Button + Power Off/On then pressed again Volume Down to get into the Mode, btw I couldn't see anything expect the red "!" at the Top.
So I reseted my Phone to the default Firmware (I had CM10.1) with Odin, and the Problem was still there, so I thought you guys could help me maybe ;/
Is it a Hardware Issue or a Softer Issue?
Do I still have a gurante?
What do I have to do?
The phone is like 4-5 months old btw.
Thank you!
//First it happens like in "Photo_2" then some time later it happens like in "Photo_1".
Guys, please help me :/
Looks like hardware failure to me, you have tried flashing stock Rom, did you factory reset after the flash?
HOUZEEE said:
Guys, please help me :/
Click to expand...
Click to collapse
You will get no help by not following the rules and bumping posts .
You have no warranty.
Flash stock rom via Odin and read the return for warranty how to post .
jje
Well I can't see anything so no I couldn't do a factory reset, and I heard that if you got a Hardware Issue that you will get a gurante, is that correct?
HOUZEEE said:
Well I can't see anything so no I couldn't do a factory reset, and I heard that if you got a Hardware Issue that you will get a gurante, is that correct?
Click to expand...
Click to collapse
No.
Root or custom rom or certain types of damage void warranty .
Phone unable to power on then its likely that root would never be noticed .
jje
JJEgan said:
No.
Root or custom rom or certain types of damage void warranty .
Phone unable to power on then its likely that root would never be noticed .
jje
Click to expand...
Click to collapse
Well you can Power on it, but if you go into the DownloadMode you can't see how often I flashed my i9300 (or let's say you can't see if i flashed my phone), so will they notice that I flashed it somehow?
can you go into recovery by holding the power+ volume up button?
Related
i tried flashing it and ionstalling a rom for the first time but it froze halfway through for like 3 hours so i just unplugged it and now this screen comes up...
no whenever i turn it on it gives me a screen with :
a phone .... an explanation mark in a triangle ! . .. . a computer
anything i can do?
also ive tried every button trick on trying to restore it and none of it works all of it just come with that screen. except for the download one where i press volume down home button and power
Robbey said:
i tried flashing it and ionstalling a rom for the first time but it froze halfway through for like 3 hours so i just unplugged it and now this screen comes up...
no whenever i turn it on it gives me a screen with :
a phone .... an explanation mark in a triangle ! . .. . a computer
anything i can do?
also ive tried every button trick on trying to restore it and none of it works all of it just come with that screen. except for the download one where i press volume down home button and power
Click to expand...
Click to collapse
you are really not giving a lot of details here...all you are saying you tried installing a rom and then it froze halfway..
Are you rooted firstly?
If you are have you flashed CF-root kernel?
How did you try to install the rom?
More info and then more people can help you out buddy..see if you can get into recovery and restart your phone.
well... if you've tried "every" (its not like there are a lot) button combination... then just go buy a jig from ebay and force it into download mode...
Matriak31 said:
you are really not giving a lot of details here...all you are saying you tried installing a rom and then it froze halfway..
Are you rooted firstly?
If you are have you flashed CF-root kernel?
How did you try to install the rom?
More info and then more people can help you out buddy..see if you can get into recovery and restart your phone.
Click to expand...
Click to collapse
Nothing from what you said would help..
He obviously flashed it with Odin, and he said he's getting a yellow triangle with a computer behind it..
From what I understood, he could get into download mode.
So just boot into download mode and flash stock ROM. That should do it.
Sent from my GT-I9100 using xda premium
anyone else seeing an increase in the "i bricked my phone" threads?
dont think its coincidence they are increasing after the american variants have been released. People need to check what model they have before flashing things.
OP: not saying thats what has happened to you as you dont say if you have the i9100 or not, hopefully you do.
bruflot said:
Nothing from what you said would help..
He obviously flashed it with Odin, and he said he's getting a yellow triangle with a computer behind it..
From what I understood, he could get into download mode.
So just boot into download mode and flash stock ROM. That should do it.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
well from what he said by his post did not make sense at all..hence why i asked for more details to explain so i could give him a better explanation and guide to fix his problem...but you seem to get what he said so by all means do your thing....but if he comes back with more detail then i will point him to the right direction on what he needs to do...at the end of the day the more opinions he has the better for him
Matriak31 said:
well from what he said by his post did not make sense at all..hence why i asked for more details to explain so i could give him a better explanation and guide to fix his problem...but you seem to get what he said so by all means do your thing....but if he comes back with more detail then i will point him to the right direction on what he needs to do...at the end of the day the more opinions he has the better for him
Click to expand...
Click to collapse
Yes of course
Btw, never ment to insult you in any ways
Sent from my GT-I9100 using xda premium
bruflot said:
Yes of course
Btw, never ment to insult you in any ways
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
its ok and same goes by my post as well buddy..we all been in his position one way or the other
1st - Your phone is not bricked if it show an image. Whatever image it is. The only real software way to brick your phone is to flash bad bootloader or stop a bootloader while they are being flashed. However, Bootloader are flashed first. So if your phone stoped half way, you should not have trouble too much.
Remove the battery from your phone for like a minute, then reboot your phone in download mode (vol- + home + power and when the phone light up, release power.) Then flash another rom from odin.
Also, what rom did you used ? If you flashed a rom for another phone, then you might have flashed bootloader for that phone on yours, which is bad. In this case you will surely need a JIG.
sorry im new to this whole rooting/flashing thing. i downloaded the lightning rom: http://forum.xda-developers.com/showthread.php?t=1095274
i have never rooted or doneanthing to my s2 before. all i did was follow the instructions on the page and thought it would be all good? it froze about a quarter of the way there in odin so i just took my phone out.
I usually find from this state I can get back to bootloader or download states
push and hold vol+ and home then power for bootloader
push and hold vol- and home then power for download
sometimes the phone can seem to freeze a little or even die (this happened to me loads on the galaxy s and once already on the s2) and removing battery sim etc or attaching the charger can jog it
however as other have said a JIG is your friend if for no other reason that even if you recover without it, custom roms up the rom count which some twitchy carriers might invalidate your warranty for, the jig will reset this
you can get them from ebay for less than £3 delivered, or there are instructions on this site for making them yourself if you are so inclined.
simply search 'galaxy s2 jig' on ebay mine was delivered today from portugal as I am way too lazy to make one and only wanted a counter reset anyway
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to ICS STOCK LPQ.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
EDIT:
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
I'm assuming download mode and recovery also don't work when the device is powered off?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
Hmm have you tried getting into download mode to see if the device shows up in odin?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
If you can get into download mode then there is still hope. If you can't then your only option is either warranty repair of Jtag service. If download mode then works then just reflash using Odin.
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
Didn't even notice that XXJVU was an i9000 firmware.
To OP: Yup nothing to do, but send it in for repairs.
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
dk206 said:
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
Click to expand...
Click to collapse
Are u sure?
vol down+power+home button is download mode
Check it once again if it doesn't work...
maybe u can try some usb-jigg ?!
so you can come in to download-mode and then flash with odin =(
dk206 said:
ye
So shall I order a JTAG to flash?
JTag is not Samsung warranty its a paid for service .
or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment....
.
Warranty is void with custom rom root or rom counter above zero .
Will they know yes counter is on 4 .
Will they ignore it and put it through as warranty they may but dont count on it .
USB jig would be the starting point .
That fails you could go to warranty repair if thats rejected then pay for JTag repair .
jjue
Click to expand...
Click to collapse
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
eBay. Or Google.
first charge it. Then try to enter download mode again. I have exp. 1 time battery low and phone just warm up and black screen. After Charge, it's ok till now!
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
Read the post USB jigs to loan out
http://forum.xda-developers.com/showthread.php?t=1495867
jje
if you have adb maybe you could try:
1. Connecting your device to PC while turned off,
2. CMD > adb devices
* If you see your device connected, proceed with:
adb reboot recovery or adb reboot bootloader
* If you don't see any device connected, try googling for qhsusb_dload driver for your device, and after you install them (and maybe a couple of PC restarts) repeat step 2
3. if you manage to get to recovery, i hope you have your nandroid backup so you could restore them.
my HTC sensation 4G had this situation few days ago, couldn't go to recovery/bootloader, blanked out when turned on and had fever
i fixed it using those steps, i wish i could remember where i got the qhsusb driver thingy from.. i'll let you know when i remember.
edit: it might work on S2, or might not.. i don't know this will help or not, but you could read adb/fastboot/bootloader/android 101, maybe you could get something from there
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
The bootloader death thing is not 100% true. When I first got my phone, (when there wasn't any rom for it) I tried flashing a I9000 rom. I was so stupid and luckily it didn't break my phone. After the flashing it turned on and stayed on bootlogo.
It was a miracle for me!
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
JJEgan said:
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
Click to expand...
Click to collapse
Ok update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
you should have tried download mode blindly first. as i have flashed once blindly and it fixed my all dead screen.
Hi,
Yesterday my phone was working fine, today ... It bootloop after 5seconds, even if i start it in download mode, i feel like the "Start" button is stuck, but i prefer to ask first. i tried to get a log from adb logcat, but the phone isn't recognised in 5sec so i have nothing.
EDIT: The phone is comming back from support because of the motherboard "suddent death", they replaced it with a same new one.
Known problem ? Any idea ? :x
Firmware version ????
Read the sudden death syndrome post in general .
recovery ???
jje
JJEgan said:
Firmware version ????
Read the sudden death syndrome post in general .
recovery ???
jje
Click to expand...
Click to collapse
Thanks for the answer
As it reboot after 5second i can't even go in recovery mode,
I don't remember the firmware version, but it's the stock one.
I'm gonna read (again) the post about sudden death
seems like the power button is stuck.
Glebun said:
seems like the power button is stuck.
Click to expand...
Click to collapse
Yea that's what i thought, but i really don't know how to open the phone, any tip ? link ?
Minoui said:
Yea that's what i thought, but i really don't know how to open the phone, any tip ? link ?
Click to expand...
Click to collapse
I add that it also could be this:
rootSU said:
2) Half SDS as it has not-so-affectionately become known. This tends to be more of a boot loop of the Samsung boot splash. the eMMC is partially wiped out. You cannot boot into android or recovery. It fails at the boot screen, but the screen does turn on none-the-less. The only; thing you can do is top boot into Download mode.
One problem Half SDS has is that the information download mode uses to show the status as "Official" appears to be wiped out by the bug, leaving your status as "Custom". This can leave you in a precarious position as this is what Samsung uses to establish warranty validity. You may also see your product field is blank.
Please help me maintain this list by identifying fixes as and when released, Please post the Link and Version number of anything with this fix implemented
Click to expand...
Click to collapse
But i can't really go into download mode so ... i still think it's simply the button wich is stuck :x
LAST EDIT:
Ok, so after 10min connected to usb (and looping) it suddently ... stopped to loop... and just i started it normaly ...
but
exactly now, when i'm writing this, the phone just restarted and went back to 'loopboot' mode
BUT
when i'm about to send the message ... it stoped to loop and i'm starting it normaly ... >_<
Ok, now 10 minutes it started normaly, 98% percent charge.
No sim inserted,no SD card, if i try to open the parameters, it open for 1/2 second then close and send me back to main menu.
Every other app seems to work normaly. (Text, internet, file explorer).
I'm going to wait a bit more then try to insert SIM and SD and reboot.
EDIT: Trying to open any "Parameter" related thing bring me back to main menu (as "Connected as" or long press the Wi-Fi etc ...).
I can activate wifi and it works ... it seems it's only the GUI xD (Maybe it's normal while not having SIM card, i never tried to run my phone without one :x )
definitely hardware buttons issue.
Ok, so after this it worked like a charm for few days, and now, bootloop again \o/
It seems to happend when the phone is down because of low batery :/
I opened it, and removed the "power" button ... still the same. it seems it's not comming from there :/
Any idea ? :x
3h it bootloops
Any idea please ?
The phone is comming back from support
Return faulty repair
jje
JJEgan said:
The phone is comming back from support
Return faulty repair
jje
Click to expand...
Click to collapse
Ok, thank you, any way the see the phone is rooted ? :x
Minoui said:
Ok, thank you, any way the seey the phone is rooted ? :x
Click to expand...
Click to collapse
Yes see the return to stock for warranty post.
jje
first of all hello to you all, i was following this forum before but i didnt signed up.
now i have a problem and i need your help and im sure that this has happened to someone else but i checked quite a few threads but didnt find the exact problem what i have.
so my problem is this, i was using siyah kernel and needed to reset my phone for some reasons. i tried to factory reset from settings and now my phone does nothing keeps black screen nothing happens (its been 3-4 hours) and i tried to reboot it and now it gives the first opening screen"samsung galaxy s2" writing but then it instantly goes to black screen again.
i cant go to recovery mode or download mode etc.
please i need your help this is my home&work phone and i need it back quickly.
Try take battery out for five mins then try to go to recovery. What firmware did you have?
andrewwright said:
Try take battery out for five mins then try to go to recovery. What firmware did you have?
Click to expand...
Click to collapse
i had ics. i took the battery off and ill try again in a few minutes.
i'll post what happens.
Pls don't say it was 4.0.4 ics? ? Never ever do a factory reset with that as has brick bug. Some say its kernel some say software but either way you should never do this.
andrewwright said:
Pls don't say it was 4.0.4 ics? ? Never ever do a factory reset with that as has brick bug. Some say its kernel some say software but either way you should never do this.
Click to expand...
Click to collapse
well, i bought the phone from my cousin with this firmware and i think it was 4.0.4.
so you say im in trouble? i dont know what should i do with brick bug, and frankly (as you can see) i dont now too much about android system.
You can try
A jig
Jtag
Mother board replacement
You could trying hold down vol-home button and power then put battery into phone. See if it go's to download mode.
Hey guys,
I have a galaxy s3 (I9300) and I've had it rooted for some time now. I started using CyanogenMod 10.2 nightlies a few months ago and they've mostly been fine. The odd issue comes up but I've been able to work it out. So, a few hours ago my phone just turned off of its own accord and started to bootloop, but on the "Samsung Galaxy S3 GT-19300" screen, not the CyanogenMod screen (to clarify, this screen comes up first then the cyanogenmod one usually). I've tried booting into recovery (CWM 6) but it just shows the CWM boot logo thing (that cog with the hat) and then loops back to the galaxy s3 page. I've also tried putting it in download mode, and it seems to stay on the warning page longer than it does anywhere else, but it wont let me actually put in it download mode from there.
I had a look around google and saw people have had the same problem, but everything I could find was when people had flashed a new rom/kernel etc. and something had gone wrong in the process. The weird thing about mine is that I haven't changed anything, even downloaded any new apps, for maybe a week, so it's not like something suddenly changed. I also wasn't using it when it started, it was just sitting on the table next to me.
Usually I can work these things out, but I'm stumped here. Any help would be really appreciated.
Thanks in advance!
danielbollom said:
Hey guys,
I have a galaxy s3 (I9300) and I've had it rooted for some time now. I started using CyanogenMod 10.2 nightlies a few months ago and they've mostly been fine. The odd issue comes up but I've been able to work it out. So, a few hours ago my phone just turned off of its own accord and started to bootloop, but on the "Samsung Galaxy S3 GT-19300" screen, not the CyanogenMod screen (to clarify, this screen comes up first then the cyanogenmod one usually). I've tried booting into recovery (CWM 6) but it just shows the CWM boot logo thing (that cog with the hat) and then loops back to the galaxy s3 page. I've also tried putting it in download mode, and it seems to stay on the warning page longer than it does anywhere else, but it wont let me actually put in it download mode from there.
I had a look around google and saw people have had the same problem, but everything I could find was when people had flashed a new rom/kernel etc. and something had gone wrong in the process. The weird thing about mine is that I haven't changed anything, even downloaded any new apps, for maybe a week, so it's not like something suddenly changed. I also wasn't using it when it started, it was just sitting on the table next to me.
Usually I can work these things out, but I'm stumped here. Any help would be really appreciated.
Thanks in advance!
Click to expand...
Click to collapse
can you at least enter download mode after a long time you said? if not, try pulling out the battery for 5 minutes or more and re-insert and enter download mode. i hope it's not sds! good luck
sriram231092 said:
can you at least enter download mode after a long time you said? if not, try pulling out the battery for 5 minutes or more and re-insert and enter download mode. i hope it's not sds! good luck
Click to expand...
Click to collapse
Nope, if I press the volume up button to go into it, it just goes back to the bootloop. I'll try the battery thing though, thanks!
Nope, it didnt work, I left it out for maybe half an hour and nothings changed :/ anyone else got any ideas?
SDS thread and BootLoop identical questions posted .
What does Product Code say in download mode .
But if you cannot get to download mode then you need a service centre repair .
looks like u are facing SDA but a bit diffrend than a normal SDS.. mine still can go into download mode with blank product name..
If product name is blank in download mode then you got sudden death, consider a phone as a brick. Nothing will help, including repartitioning.
You need to contact service centre.
I'll check it in a minute, but if it is bricked, will any service center actually help me seeing as it's rooted and all?
danielbollom said:
I'll check it in a minute, but if it is bricked, will any service center actually help me seeing as it's rooted and all?
Click to expand...
Click to collapse
AFAIK if it's sudden death then it's not possible to detect root and other modified things, or in other words - nobody has money to prove that you have been using unofficial firmware .
JustArchi said:
AFAIK if it's sudden death then it's not possible to detect root and other modified things, or in other words - nobody has money to prove that you have been using unofficial firmware .
Click to expand...
Click to collapse
Ahhhh, well that is handy then
In terms of a service centre, will samsung have a list of them somewhere so I can find one near me?
So I contacted samsung and they gave me the link to book into a service centre etc, but I just realised that when I try to go into recovery mode, the CWM recovery logo comes up before going back to bootloop. Is there any way to get rid of that so that my root is completely untraceable?
danielbollom said:
So I contacted samsung and they gave me the link to book into a service centre etc, but I just realised that when I try to go into recovery mode, the CWM recovery logo comes up before going back to bootloop. Is there any way to get rid of that so that my root is completely untraceable?
Click to expand...
Click to collapse
If you can't flash anything with Odin (stock software) then you're screwed. Eventually you can try to enter recovery and flash "eraser" of recovery, but this requires working recovery... So if you actually can enter recovery then you can also flash anything, which will literally delete everything.
In other case, no, no way. But if you're lucky enough you may break it just by leaving your phone on for some hours in bootloop, haha.
JustArchi said:
If you can't flash anything with Odin (stock software) then you're screwed. Eventually you can try to enter recovery and flash "eraser" of recovery, but this requires working recovery... So if you actually can enter recovery then you can also flash anything, which will literally delete everything.
In other case, no, no way. But if you're lucky enough you may break it just by leaving your phone on for some hours in bootloop, haha.
Click to expand...
Click to collapse
Is there any way to wipe it with magnets or anything? hahah I'm clutching at straws now, but otherwise I'm just left with an expensive paperweight so I'm trying to find anything I can
danielbollom said:
Is there any way to wipe it with magnets or anything? hahah I'm clutching at straws now, but otherwise I'm just left with an expensive paperweight so I'm trying to find anything I can
Click to expand...
Click to collapse
To be honest think twice before physically crashing your internal memory, as it may void your warranty at all.
I'd try flashing stock firmware through odin, if it doesn't work I'd try flashing anything through recovery. If both of these methods fail just leave your phone in bootloop and hope that it'll automatically destroy everything... :laugh:
Seriously though, you can either physically destroy internal memory or leave it in bootloop and hope for the best, eventually send them device in current status. Up to you, because you won't have a possibility to do anything else.
JustArchi said:
To be honest think twice before physically crashing your internal memory, as it may void your warranty at all.
I'd try flashing stock firmware through odin, if it doesn't work I'd try flashing anything through recovery. If both of these methods fail just leave your phone in bootloop and hope that it'll automatically destroy everything... :laugh:
Seriously though, you can either physically destroy internal memory or leave it in bootloop and hope for the best, eventually send them device in current status. Up to you, because you won't have a possibility to do anything else.
Click to expand...
Click to collapse
If I send it back to them as it is now it'll take them about 20 seconds I reckon before they see the CWM logo, realise its rooted and send it straight back, so I dont know what I'm gonna do hahah