Hey everyone
I downloaded and installed the jellybean ota successfully to my CDMA razr maxx xt912 the day the leak came out. Everything was running smooth and safestrap was installed. Then I tried to install a theme and everything went bad! The phone can only boot to fastboot because the jb ota leak didn't have a stock recovery.
Since the jelly bean fast boot files aren't out I just bought a used gnex from my friend and have been loving it but I want to get my razr up and running..
I have tried rsdlite and the utility tools to try and bring it back to ICS and nothing works so far.. Any ideas?
Sent from my Galaxy Nexus using xda app-developers app
me too
bmw5085 said:
Hey everyone
I downloaded and installed the jellybean ota successfully to my CDMA razr maxx xt912 the day the leak came out. Everything was running smooth and safestrap was installed. Then I tried to install a theme and everything went bad! The phone can only boot to fastboot because the jb ota leak didn't have a stock recovery.
Since the jelly bean fast boot files aren't out I just bought a used gnex from my friend and have been loving it but I want to get my razr up and running..
I have tried rsdlite and the utility tools to try and bring it back to ICS and nothing works so far.. Any ideas?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
IM IN THE SAME BOAT. BROTHER ANY LUCK?
bmw5085 said:
Hey everyone
I downloaded and installed the jellybean ota successfully to my CDMA razr maxx xt912 the day the leak came out. Everything was running smooth and safestrap was installed. Then I tried to install a theme and everything went bad! The phone can only boot to fastboot because the jb ota leak didn't have a stock recovery.
Since the jelly bean fast boot files aren't out I just bought a used gnex from my friend and have been loving it but I want to get my razr up and running..
I have tried rsdlite and the utility tools to try and bring it back to ICS and nothing works so far.. Any ideas?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
You can NOT ever get back to ICS. Can you clarify if you were on the Christmas leak or soak/ota before this happened?
Full-Throttle Team
Android Aggression Team
i posted this on another thread but same thing.
Easy Fix,
Matt's Utility 1.90
http://www.droidrzr.com/index.php/to...ux-all-in-one/
1. Unzip, move the folder that said MOVE TO SD
2. Go into AP Fastboot
3. Do # 1
4. Power Off/On then go into Recovery
5. Wipe everything
6. Install update from External SD
7. Choose the ICS > JB Leak
8. Go take a short 20 mins nap
9. Reboot and go into the whole setup process
10. Use 1.90 Utility to Root your Phone
11. Install RootKeeper
12. Choose #4 and follow instruction on how to install from Leak > JB
13.
The leak I downloaded was the night before Christmas I'm pretty sure.. Thanks for responding I'll see if the utility works!
Sent from my Galaxy Nexus using xda app-developers app
I can't boot into recovery to wipe the phone or install anything because there is no stock recovery on the jb ota I have.. All the phone does is boot to fastboot so that method won't work for me. I'm pretty sure I'm guna have to wait for the fastboot files unless I can get a recovery on the phone through fastboot
Sent from my Galaxy Nexus using xda app-developers app
bmw5085 said:
I can't boot into recovery to wipe the phone or install anything because there is no stock recovery on the jb ota I have.. All the phone does is boot to fastboot so that method won't work for me. I'm pretty sure I'm guna have to wait for the fastboot files unless I can get a recovery on the phone through fastboot
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
The stock recovery shouldn't be over written. Access it the same way you do for fast boot
Full-Throttle Team
Android Aggression Team
Never mind I got that to work thanks!
Sent from my Galaxy Nexus using xda app-developers app
Related
My phone wont boot now.
It stays stuck at the 2nd Samsung during the boot up.
What happen was I updated today to offical ICS from my rooted gingerbread.
I updated via kias today to get official ICS, got it working and I noticed I didn't have cwm install anymore, so I followed this http://forum.xda-developers.com/showthread.php?t=1504218
It is pass it did it reboot thing, and never got past the 2nd "samsung" loading screen.
Anyone know how to get my phone booting again?
Flash the latest ICS kernel
I am not sure how to do that without cwm.
Before I updated to ICS when I press power + up down, it booted into CWM. Now when I do that I boots into Android System Recovery <3e>
EDIT: Good news.
Got CWM through installed though odin and then I restored to my gingerbread backup I made earlier.
Flash your roms via clockwork recovery mod from now on.
Drop the ROM .zip on sd card and then enter recovery. Wipe everything three times each then flash a uclf6 based ROM. Never touch Odin or kies again. Be happy. Ice cream sandwich is way better than ginger bread
Sent from my SAMSUNG-SGH-I717 using xda premium
Had the same exact problem. I "believe" the problem was that the CWM I flashed was perhaps incompatible with the official ICS?
I used Odin to flash cwm 5.5.0.4 as suggested and the fone was shut down with the hanging Samsung screen as you mentioned. I used the DL screen with Odin to the 600mb Team Objection ROM, which at least got me up and running again. I found out that CWM did in fact flash once the ROM was compatible with it. Updated CWM, then to finally get full stability, I had to do a factory reset after clearing both caches, then install the CM9 official.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Update: I installed official ICS again last night, looks like I lost my root and CWM.
I don't want to mess anything up again, so could you tell me exactly what CWM file you used to flash so it doesn't hang at samsung again?
I was having the same problems but I think I was doing it wrong. How are you flashing the root files? I upgraded from Kies, then used Odin to flash cwm touch (5.5.0.4 I think), make sure to let the reboot and that it's actually turned on and you can see your homescreen. Once you do that, THEN flash the superuser 3.0.7 in cwm. Let the phone reboot properly and it should be okay.
I was doing the same without the reboots and that's what caused me to hang at the logo, but after the above it worked well. Give it a try. For anyone who needs to flash the T-Mobile radios also let the phone reboot and then flash it because I was having issues with that which was fixed by letting the phone reboot.
Make nandroids at every step in case it does hang so you can just restore and try again instead of flashing everything all over again.
Sent from my SGH-I717R using xda app-developers app
I've also tried rooting my AT&T Galaxy Note I717 which had recently upgraded to ICS via AT&T/Kies and my phone is stuck at the Samsung boot screen. While I'm no expert with rooting phones, I had no problem rooting it when it had GB installed so I figured I wouldn't have any problems rooting it again. Is flashing the ICS kernel the best way to fix this? Where do I get the ICS kernel from and how do I flash it?
Details: After my phone upgraded to ICS 4.0.4 kernel 3.0.8 (IMM76D.UCLF6), I followed some instructions to root it using Odin3-v1.85 and PDA->pda.tar. Other instructions used cwm-touch-i717-120414.tar.md5 and odin_n1717_cwm_recovery_b4.tar and I tried those but to no avail. So I have CWM v5.5.0.4 installed but I don't know what to do next.
Any help is greatly appreciated. Thanks!
dcdtrax said:
I've also tried rooting my AT&T Galaxy Note I717 which had recently upgraded to ICS via AT&T/Kies and my phone is stuck at the Samsung boot screen. While I'm no expert with rooting phones, I had no problem rooting it when it had GB installed so I figured I wouldn't have any problems rooting it again. Is flashing the ICS kernel the best way to fix this? Where do I get the ICS kernel from and how do I flash it?
Details: After my phone upgraded to ICS 4.0.4 kernel 3.0.8 (IMM76D.UCLF6), I followed some instructions to root it using Odin3-v1.85 and PDA->pda.tar. Other instructions used cwm-touch-i717-120414.tar.md5 and odin_n1717_cwm_recovery_b4.tar and I tried those but to no avail. So I have CWM v5.5.0.4 installed but I don't know what to do next.
Any help is greatly appreciated. Thanks!
Click to expand...
Click to collapse
Update: I restored my phone back to a non-rooted working Android 4.0.4 by downloading the stock ROM for my phone (I717UCLF6_I717ATTLF6_I717UCLF6_HOME.tar.md5) and uploading it using Odin3-v1.85/PDA. I didn't even lose any of my settings or data. Now I need to figure out how to successfully root it. But at least I'm not worried about getting stuck on the Samsung screen anymore.
Open odin , PDA cwm file, Droid in dl mode, plug in start unplug, reboot, go to cwm recovery mode and backup onto sd card.
Im learning more, as i soft bricked mine last time
dcdtrax said:
Update: I restored my phone back to a non-rooted working Android 4.0.4 by downloading the stock ROM for my phone (I717UCLF6_I717ATTLF6_I717UCLF6_HOME.tar.md5) and uploading it using Odin3-v1.85/PDA. I didn't even lose any of my settings or data. Now I need to figure out how to successfully root it. But at least I'm not worried about getting stuck on the Samsung screen anymore.
Click to expand...
Click to collapse
Odin....to get touch cwm, then download the super user zip and flash it, you will have root....
All can be found in "My links" see it in red...go to GNote page....
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
what about su binaries
Can i put both on my sd card and put it in my phone, cmw recovery and install from there?
liftedzuki said:
what about su binaries
Can i put both on my sd card and put it in my phone, cmw recovery and install from there?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1740367
ok look for the green arrow...and use those threads....to root...k
odin for touch cwm
flash super user
your rooted
You realize the reason you were stuck was because you flashed a GB kernel onto an ICS system? It would never boot. As the second post suggested... all you had to do was flash an ICS kernel to get it to boot.
Sent from my Amazon Kindle Fire using xda premium
Sent from my Amazon Kindle Fire using xda premium
Rooted.
erad1 said:
You realize you the reason you were stuck was because you flashed a GB kernel onto an ICS system? It would never boot. As the second post suggested... all you had to do was flash an ICS kernel to get it to boot.
Sent from my Amazon Kindle Fire using xda premium
Sent from my Amazon Kindle Fire using xda premium
Click to expand...
Click to collapse
so correct...you nailed it...so many are trying to root with gb kernal....
I hope they go to the page I made and follow the green arrowed how to root ics...it is very super simple process to root the official ics...but ....
This happened to me after misreading a comment.
If you put your phone into download mode, plug it in, run kies, and do an emergency firmware recovery. You'll need the serial number. My phone is stock ICS again. Works fine.
erad1 said:
You realize the reason you were stuck was because you flashed a GB kernel onto an ICS system? It would never boot. As the second post suggested... all you had to do was flash an ICS kernel to get it to boot.
Sent from my Amazon Kindle Fire using xda premium
Sent from my Amazon Kindle Fire using xda premium
Click to expand...
Click to collapse
so cwm 5.5.0.4 touch is a GB kernel? Because that's all I flashed after the KIES update to ICS and I got the hanging Samsung logo.
I believe some people are trying to get ICS rooted with this cwm and are getting stuck. Of course there are ways out of it, but it'll help the learning process if we can find the problem.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
romeojunior said:
so cwm 5.5.0.4 touch is a GB kernel? Because that's all I flashed after the KIES update to ICS and I got the hanging Samsung logo.
I believe some people are trying to get ICS rooted with this cwm and are getting stuck. Of course there are ways out of it, but it'll help the learning process if we can find the problem.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Wait what??!!??!!
you need to read read read read and PLEASE read
Because CMW is not a kernel
Its a recovery
People wouldn't have these issues if they read.
Please refer to the stickies before you really damage your phone.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
The OP had posted that he flashed Da_g's GB kernel trying to get root...your issue if flashing CWM may be different. Hopefully you use the steps outlined by bigjoe in his post.
Sent from my SAMSUNG-SGH-I717 using xda premium
Okay so my friend has a samsung vibrant is wanted to get his phone rooted and went to me. So I rooted it and installed ICS passion 13.1 ROM and it worked fine. Then he wanted jelly bean, so i looked into jelly bean and decided that i wanted to use Slim Bean to install it and it did not work. I download all the necessary files and then put them on the phone. I flashed the first file(t959) then the common file but after i installed the device file(t959) the phone stayed at samsung vibrant for too long. Then i pulled the battery went to CWM and installed the common file and after that i tried to reboot and try out Jelly Bean. It just stayed at the samsung logo. So then i started freaking out but forgot that i still had a backup. I restored the backup that i made earlier(real life saver this time) but there are more problems than i expected. Now the home and search button on his phone doesnt work and he needs jellly bean. What do i need to do to fix the home and search button? Should i reinstall passion ics 13.1 or restore the backup of eclair? If i can fix that how will i go to jelly bean?
Go back to eclair, install a froyo ROM, I used bionix v. Probably doesn't matter. Flash cm9 nightly (latest). Then flash up to Helly Bean (my rom of choice)
Obviously wipe/factory reset/wipe cache/dalvik before each flash step.
Enjoy your buttery jelly beans!
Okay so I need to restore the eclair backup? Why can't I go from jelly bean from passion.
Sent from my Nexus 7 using xda premium
You might be able to. I don't remember the circumstances, but if I recall correctly, some people have reported having issues going from Passion to JB.
I could be mistaken.
Should I just install cm9 to get to jelly bean then?
Yeah, wipe data, wipe cache, dalvik. Then flash and reboot recovery and flash common. After that I booted up to make sure everything was going as planned. Then I rebooted to recovery wiped again and flashed Helly Bean.
So install cm9 then use your instructions to install slim bean?
Sent from my Nexus 7 using xda premium
Yes. Fire away. If you have any questions feel free to ask. We're here all the time
I would recommend to Odin to eclair, then flash the latest CM10 nightly (you can find the thread in the Dev section). Reboot, then flash again with GApps.
Sent from my SGH-T959 using xda app-developers app
Why Odin the phone?
Sent from my Nexus 7 using xda premium
Cm10 isn't good enough for daily driver, my friend needs something that works
Sent from my Nexus 7 using xda premium
lovenokia said:
Why Odin the phone?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
To get the best clean install its best to Odin back to stock however you cannot go from stock straight to cm10.
If you ask what is the best way to get to jb, 3 people will probably give three different answers. I'm not sure what you're running now but its good to upgrade incrementally. Stock>cm7>cm9>jellybean(cm10). After you flash all zips for any ROM, if it gets stuck on boot screen, give it a few minutes sometimes it will take awhile at first. If it doesn't boot pull battery and use 3 button combo back to recovery and reboot. If it still doesn't go pull battery 3 button to recovery and flash everything again no wipe. That usually fixes it.
sent from my magic box to yours
Ok I got a xt912 on verizon cdma/lte razr
The guy who traded it for me already had it rooted with cwm5.x
I placed the razr tool to upgrade to version 6 of cwm and did a backup
Today I decided to do a restore.
I then let it do it thing and then went to reboot after the restore
Now all i get is the duel core red logo at times
I was able after a bit to get into the thing were it lets you check ap fast boot, recovey bp tool
but not sure how i got into that
how do i fix this or return to stock or just get the phone working again
Used razwr util.. 1.81and now working. . Now how to flash custom rom... whats next step install safe strap or what
Sent from my DROID RAZR using Tapatalk 2
safestrap
Sent from my DROID RAZR using xda premium
1. Root with 1.81 utility
2. Go here and grab safestrap http://rombot.org/ROMs/spyder/ (you may want to start from a clean rooted install on your safe system)
3. Follow how to safestrap
4.choose a rom, flash
5. profit
Sent from my DROID RAZR using xda premium
Thanks i am used to the old way unlock boot loader and boot into cwm but now it seems we have other steps. What is booting into safe system boot? And how do you do it....
Sent from my DROID RAZR using Tapatalk 2
I recently performed the steps to update my RAZR MAXX (XT-912 CDMA) to the OTA JB update. I had no issues. I obtained Root privileges and installed the most recent version of Safestrap for my phone (3.11). No problems detected. I then booted into Safestrap recovery and created a new ROM slot. Installed Jellycore V1.5 to it as well as Gapps. Booted to that slot and NOTHING. The screen just goes black after the Safestrap screen. So I booted back into Safestrap recovery and tried to restore my backup to that slot...same result. When the phone is rebooted, it goes to the Safestrap screen where you can select continue or recovery. If I continue (by selection or waiting the 10 seconds) the screen just goes black. I left it that way overnight thinking it might take a while but no. I've tried reinstalling Safestrap, different ROMS, and reinstalling ROMS. Any ideas? Because I need my AOKP.
Sent from my DROID RAZR MAXX using xda app-developers app
Update...
I can get ROM slot one to successfully install and boot motoblur-98.72.8-XT912.zip.
I cannot get it to boot jellycore v1.5 or CNA v1 or any other non stock ROM. What is going on. Tried Safestrap 3.11 and 3.05.
My DROID RAZR MAXX sent this on its own.
What slot are you using
Sent from my Motorola Galaxy s3 using xda premium
Trying to install to ROM slot 1. I had this same setup running fine (Jellycore as my daily driver) and never had any problems installing ROMs on Safestrap until I did the Stock update to JB.
My DROID RAZR MAXX sent this on its own.
I figured it out. When I updated to JB, it updated the kernel as well. I put the new AOKP JB ROM on and no problems. Oversight on my part.
My DROID RAZR MAXX sent this on its own.
bear with me....
awedel said:
I figured it out. When I updated to JB, it updated the kernel as well. I put the new AOKP JB ROM on and no problems. Oversight on my part.
My DROID RAZR MAXX sent this on its own.
Click to expand...
Click to collapse
bear with me, i am new to rooting the razr maxx ... i have rooted an htc thunderbolt, 3 gNexs, 2 nexus 7, and 2 galaxy s3s but i am havingw trouble with problem very similar to yours... but with a twist, i cant seem to remember all the the steps i took to produce this problem, as i was rooting my buddies razr maxx over super bowl weeekend and havent picked it up since ..... til now ... but anyways .. i did obtain root and had safestrap 3.11 installed... ok for starters the phone for one will not power on at all unless i plug it into a charger ... and when i do that i see the dual core screen and then it brings up the safestrap diabled screen and gives the option to press the menu button to reboot into recover or press the search button (or wait 10 seconds) to continue... when i press the menu button it goes to the black screen like u said ... when i wait 10 seconds it goes to the black screen and when i press the search button it goes to the black screen ... and then i end up having to use the volume down and power button to power it off (or if i unplug the charger it also powers off) ... when i plug it in again it automattically turns on and goes to the dual core screen and starts the process over ... i am however still able to get in to the boot menu ... and i tried to go into recovery mode that way and now the screen is stuck on the dual core screen with it plugged into the wall charger.... im thinking i have multiple issues ... one battery issue and i must have went wrong somehwere trying to flash a rom ...but wnho knows .. not me lol .... please please help ... we can do a google hangout and try to resolve this issue if you are willling ..... thanks in advance
Try taking it back to stock and starting over. Might be your best bet.
My DROID RAZR MAXX sent this on its own.
Yes go back to original
Sent from my SCH-I535 using Tapatalk 2
same issue here
awedel said:
Try taking it back to stock and starting over. Might be your best bet.
My DROID RAZR MAXX sent this on its own.
Click to expand...
Click to collapse
I am also having the issues mentioned in this forum. I rooted the razr maxx, then installed ss 3.11. I tried installing Jellywiz, and cm10.1 and neither worked. I did install the Vzn JB update for my phone before rooting it. Now the phone just does the boot loop and black screen thing. Any ideas?
if you boot to a blank screen and it stays there more than a minute or so after the kexec vibrate, you need to reboot to SafeStrap - switch to stock and boot it (optionally uninstall and reinstall recovery from the SafeStrap app). Then reboot and select your ROM slot and it should boot fine.
Sent from my XT910 using xda app-developers app
how can i revert back to the original stock kernel?
natjeff1988 said:
I am also having the issues mentioned in this forum. I rooted the razr maxx, then installed ss 3.11. I tried installing Jellywiz, and cm10.1 and neither worked. I did install the Vzn JB update for my phone before rooting it. Now the phone just does the boot loop and black screen thing. Any ideas?
Click to expand...
Click to collapse
Are you wiping cache, dalvik, system, and factory reset after you create the rom slot? I had issues with a few ROMs until I wiped everything before installing a rom to a new slot. Also, you can run into this if you are trying to install a ROM into a ROM slot that had a different ROM installed on it previously. If that is the case just delete the slot and recreate it. (Oh and make sure it is not the stock rom slot that you are deleting, that would not be good) One last thing, some ROMs only work on ROM slot 1.
---------- Post added at 10:05 AM ---------- Previous post was at 09:45 AM ----------
curseshadow said:
how can i revert back to the original stock kernel?
Click to expand...
Click to collapse
If you have safestrap installed then your stock ROM is already preserved. Are you trying to revert back to a previous kernel before the JB update?
vnom2112 said:
If you have safestrap installed then your stock ROM is already preserved. Are you trying to revert back to a previous kernel before the JB update?
Click to expand...
Click to collapse
yes, i'm using JB right now and i try to flash ICS rom using safestrap and seems like the flash is successful but when i wanna boot the ICS.. the screen just blank..
curseshadow said:
yes, i'm using JB right now and i try to flash ICS rom using safestrap and seems like the flash is successful but when i wanna boot the ICS.. the screen just blank..
Click to expand...
Click to collapse
You can't go back or flash to ICS ROMs when you're on jellybean man!!!
Sent from my GT-I9300 using xda app-developers app
TheMrcool212 said:
You can't go back or flash to ICS ROMs when you're on jellybean man!!!
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yeah.. i just realized that.. now i need to try other jellybean rom that's stable for my phone..
Followed the instructions on the main page of official CM 10.1 & ended up with a bootloop. Wiped caches and user data over & over with no change, so I'm about to downgrade back to 4.0.4 using RSD lite. I'm still determined to get to CM 10.1 on this device though but how do I do that now?
I saw "setting 2init" but I can't make any sense of what it means or how I can make use of it.
While trying to figure it out, I found the guide to upgrade to official JB but the JB OTA file it points to is for the xt912 (I'm using the xt910).
NOTE: I'm not going with the official JB, but it is the only other comprehensive guide I could find for upgrading from 4.0.4.
How do I get CM 10.1 on this phone now?
Terrarist said:
Followed the instructions on the main page of official CM 10.1 & ended up with a bootloop. Wiped caches and user data over & over with no change, so I'm about to downgrade back to 4.0.4 using RSD lite. I'm still determined to get to CM 10.1 on this device though but how do I do that now?
I saw "setting 2init" but I can't make any sense of what it means or how I can make use of it.
While trying to figure it out, I found the guide to upgrade to official JB but the JB OTA file it points to is for the xt912 (I'm using the xt910).
NOTE: I'm not going with the official JB, but it is the only other comprehensive guide I could find for upgrading from 4.0.4.
How do I get CM 10.1 on this phone now?
Click to expand...
Click to collapse
After flashing the CM10.1 and the 4.2 gapps, you also need to flash the the patch here: http://forum.xda-developers.com/attachment.php?attachmentid=1737046&d=1361096282 by whirleyes
it seems to have made things worse. before I had the "infinite cyanogen logo". now I keep getting screen off & the Motorola logo
Terrarist said:
it seems to have made things worse. before I had the "infinite cyanogen logo". now I keep getting screen off & the Motorola logo
Click to expand...
Click to collapse
its that mean you had bricked it?
No. thankfully I can still get to recovery & fastboot
Make sure you install it in second system, your razr will bricked if you install on the first system
And also, make sure you wipe cache/dalvik cache before flashing and factory reset(if you are going to install a other rom) . You need to format /system and wipe cache/dalvik if you are going to update cm10.1 to a new nightly .
Sent from my Transformer TF101 using xda app-developers app
TheMrcool212 said:
Make sure you install it in second system, your razr will bricked if you install on the first system
And also, make sure you wipe cache/dalvik cache before flashing and factory reset(if you are going to install a other rom) . You need to format /system and wipe cache/dalvik if you are going to update cm10.1 to a new nightly .
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
Yea.... I never saw this and it's exactly what I've done. Downloading the original ICS roms from it's country of origin to see if I can restore right back to factory settings. I can still go into Recovery mode & I installed the rom to the 2nd slot but I'm not getting anything.
Terrarist said:
Yea.... I never saw this and it's exactly what I've done. Downloading the original ICS roms from it's country of origin to see if I can restore right back to factory settings. I can still go into Recovery mode & I installed the rom to the 2nd slot but I'm not getting anything.
Click to expand...
Click to collapse
Maybe because of the kernel?? Make sure you dowloaded the cm10.1 for gsm and not for CDMA and also not for the Jelly bean kernel. Can you boot to the first system, which is the stock ROM?
Sent from my XT910 using xda app-developers app
TheMrcool212 said:
Maybe because of the kernel?? Make sure you dowloaded the cm10.1 for gsm and not for CDMA and also not for the Jelly bean kernel. Can you boot to the first system, which is the stock ROM?
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Using this CM http://get.cm/?device=umts_spyder
1st system is gone cuz I wiped it. Now downloading 4 UAE roms from http://sbf.droid-developers.org/umts_spyder/list.php to see which is the original.
Terrarist said:
Using this CM http://get.cm/?device=umts_spyder
1st system is gone cuz I wiped it. Now downloading 4 UAE roms from http://sbf.droid-developers.org/umts_spyder/list.php to see which is the original.
Click to expand...
Click to collapse
You are now using the official cm10.1. and why does your first system is gone? its dangerous, dont leave it like that, make the stock rom as a backup if something happens at the other system
the reason its showing nothing when you booted your phone is becuase you have wiped you first system! so now i recommend you to factory reset in the stock revocery and flash the 672.180.14.XT910.Retail.en.EU firmware at this link : http://sbf.droid-developers.org/umt...SPDRICSRTGB_HWp2b_Service1FF_fastboot.xml.zip
so you can get the jelly bean leak without erasing your cid (not for the xt912). after that, you can install cm10.1 . The tutorial are here : http://forum.xda-developers.com/showthread.php?t=2192532
I literally just finished using RSD Lite to reflash a new ICS rom back onto stock slot. So I'm safe. I'll be working with slot 2 now.
So TheMrcool212 you're saying to use the tutorial to pave the way for CM 10.1? Does it matter that my device is from the UAE?
Terrarist said:
I literally just finished using RSD Lite to reflash a new ICS rom back onto stock slot. So I'm safe. I'll be working with slot 2 now.
So TheMrcool212 you're saying to use the tutorial to pave the way for CM 10.1? Does it matter that my device is from the UAE?
Click to expand...
Click to collapse
yes, because the recovery is installed on the first system, if your device is from UAE, its just doesnt matter, but i recommend you to flash the European firmware so you can get the jelly bean leak
I couldn't find the "set 2-init" option in BMM so I skipped it and CM 10.1 is working just fine (installed with bmm) :good:
dont forget to flash whirleys "why we have to...zip" file after flashing cm10.1
romdroid. said:
I couldn't find the "set 2-init" option in BMM so I skipped it and CM 10.1 is working just fine (installed with bmm) :good:
dont forget to flash whirleys "why we have to...zip" file after flashing cm10.1
Click to expand...
Click to collapse
you can set 2-init by going to first bootmenu screen > settings > (the system number of the rom you want to set) > boot mode >
Sv: [Q] Upgrading from xt910 404 stock to CM10.1
TheMrcool212 said:
you can set 2-init by going to first bootmenu screen > settings > (the system number of the rom you want to set) > boot mode >
Click to expand...
Click to collapse
Oh well ok cm is booting fine but thanks for the heads up :thumbup:
Sent from my XT910 using xda premium
TheMrcool212 said:
so you can get the jelly bean leak without erasing your cid (not for the xt912). after that, you can install cm10.1 . The tutorial are here : http://forum.xda-developers.com/showthread.php?t=2192532
Click to expand...
Click to collapse
Followed the instructions:
To apply the JB OTA you have to be on 672.180.41.XT910.Retail.en.EU without any Modifications, like deleted System Apps or changed Boot.img / Baseband.
I recommend to start with an fresh RSD Lite - Flash, before you try to apply the OTA.
Click to expand...
Click to collapse
Now phone won't boot. Thumping motorola logo for a bit, slight vibration, then off.
Terrarist said:
Followed the instructions:
Now phone won't boot. Thumping motorola logo for a bit, slight vibration, then off.
Click to expand...
Click to collapse
do you flash it on the stock recovery?? are you on the 672.180.41.XT910.retail.en.eu version?? are you rooted??
Sent from my Transformer TF101 using xda app-developers app
AW: [Q] Upgrading from xt910 404 stock to CM10.1
Wipe Data in Recovery.
Gesendet von meinem XT890 mit Tapatalk 2
I keep getting lucky with this thing. Apparently part of the problem was that the battery was flat. Odd seeing as I made sure to be 100% before I got started.
HSD-Pilot said:
Wipe Data in Recovery.
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
Done and it's booted.
TheMrcool212 said:
do you flash it on the stock recovery?? are you on the 672.180.41.XT910.retail.en.eu version?? are you rooted??
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
I used RSD Lite. Yes I am. About to root & go on to the next steps:
Downloads
OTA Update Zip
Voodoo OTA Rootkeeper
How To
I'll show you how you have to apply the Update without loosing your Root.
1. Copy the Blur_Version.672.180.41.XT910.Retail.en.EU.zip into the Root of your external SD-Card
2. Update your SU-Binarys
3. Install the Voodoo OTA Rootkeeper on your Device and open it. Choose Protect Root and temp. unroot
4. Boot into Stock Recovery
5. Wipe Cache
6. Choose apply Update from external Storage and select the Blur_Version.672.180.41.XT910.Retail.en.EU.zip. Wait untill the Update-Process is finished and your RAZR is booted completely
7. The last step is to open the Voodoo Rootkeeper again and to restore your Root.
Click to expand...
Click to collapse
To be clear. After this, what do I do to get CM 10.1. Follow these instructions? http://forum.xda-developers.com/showthread.php?t=2028020 http://forum.xda-developers.com/showpost.php?p=39166589&postcount=914
UPDATE
Followed the instructions. Got nothing. Not even the cyanogenmod logo. At least now I have the stock rom running Blur_Version.672.180.41.XT910.Retail.en.EU.