[Q] B1-EP2 how to root? - Android Q&A, Help & Troubleshooting

Just bought this ultra-cheap Android phone on CD-R KING in the Philippines.
Seems I can't post URLs on this forum yet, but just go to the CD-R KING homepage and search for B1-EP2.
2580 Philippine pesos = 63.45252 U.S. dollars
2580 Philippine pesos = 48.8021228 Euros
Sim Cards: Dual Sim Cards(dual standby)
Band: Dual Band
Network: GSM 850/900Mhz/1800/1900MHz
Size: 6.2cm x 11.8cm
Display: 4.0" Touch Screen
Resolution: 480*800 pixels
Touch Lens: Capacitive Multi-touch Lens
Internal Memory: 1GB+256MB
CPU Frequency: 1.5Ghz
Camera: Dual Camera
Front 0.3MP/Back 2MP)
System: Android 4.0 (Ice Cream Sandwich)
With Wi-Fi Support(802.11 b/g)
Card Slot: T-Flash (Micro SD Card)
Yes, I know it is a China phone and yes, I know it is probably a pain in the but to root and find custom roms for, but still. It is damn CHEAP!
Anyways, I have tried to root this phone without success. I have tried SuperOneClick and other funky scripts I found online, but still no go.
I was hoping someone could give me some pointers when it comes to rooting these "no-name" china phones with custom firmwares.
This specific phone has some CD-R KING custom rom with Android 4.0.8.
They claim it has 1500mhz CPU, but I'm skeptical.
It's most likely has this CPU:
MT6573: ARM11 (ARMv6) CPU at 650 MHz / GPU: PowerVR SGX 531 / 3G,HSPA compatible
But I don't see any signs of 3G.
However, the phone is running pretty fine overall.
This is the info I get from "Android System Info":
Android version: 4.0.8
Release Codename: REL
API LEVEL: 10
CPU ABI: armeabi
Manufacturer: unknown
Bootloader: unknown
CPU ABI2: unknown
Hardware: mt6573
Radio: unknown
Board: vanzo13_gb
Brand: V3_I9300_C_2012.09.22
Device: B1-EP2
Display: B1-EP2 20130119-104424
Fingerprint: yusu/vanzo13_gb/vanzo13_gb:2.3.6/GRK39F/eng.tiankun.1358563433:user/test-keys
Host: tiankun-desktop
ID: GRK39F
Model: B1-EP2
Product: B1-EP2
Tags: test-keys
Type: user
User: tiankun
CPU:
Processor ARMv6-compatible processor rev 7 (v6l)
BogoMIPS 1594.90
Features swp half thumb fastmult vfp edsp java
CPU implementer 0x41
CPU architecture 7
CPU variant 0x0
CPU part 0xv76
CPU revision 7
Hardware MT6573
Revision 65fb8a00
Any help getting this device rooted would be appreciated.

Ok, I managed to root it
Now it's clear that it has a 650mhz CPU. However, it seems it is pre-clocked to 806mhz.
No luck with ClockWorkMod though. Is there some other recovery software that can be used with these China "no-name" phones?

exice said:
Ok, I managed to root it
Now it's clear that it has a 650mhz CPU. However, it seems it is pre-clocked to 806mhz.
No luck with ClockWorkMod though. Is there some other recovery software that can be used with these China "no-name" phones?
Click to expand...
Click to collapse
will you please share how did you managed to root said unit, ihave the same phone too.... tia

tony08xda said:
will you please share how did you managed to root said unit, ihave the same phone too.... tia
Click to expand...
Click to collapse
I'm not allowed to post URLs on this forum, but you will probably find it if you search for "RootTool_setup.exe" on Google. The icon should be blue with a shield on it. The program is in Chinese.
Please post all your findings in this thread, like when you manage to install a Recover tool or if some custom ROM works for you. Thanks.

usb host on b1-ep2
exice said:
I'm not allowed to post URLs on this forum, but you will probably find it if you search for "RootTool_setup.exe" on Google. The icon should be blue with a shield on it. The program is in Chinese.
Please post all your findings in this thread, like when you manage to install a Recover tool or if some custom ROM works for you. Thanks.
Click to expand...
Click to collapse
tony08xda and exice do you still have your b1-ep2 cdrking unit? can you run the usb diagnostics (www apkfulls com / download / usb-host-diagnostics-v1-2 . html) and describe if for some reason the it can act as a usb host using an otg. thanks

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
matagal din ba xang malowbatt? and anong package ang kasama niya?

Related

Need help to repair Z3Z6Z7 (G20) MT6573

Hello, help me please:
Code:
Hardware : MT6573
Model : Z3Z6Z7
Build number : Z3Z6Z7 20120816-100808
Build date UTC : 20120816-020808
Android v : 2.3.6
MAUI.11AMD.W11.37.SP.V4.F2, 2012/03/09
Was flashing by MT6575. And he died.
Found similar backup
Code:
Hardware : MT6573
Model : Z3_Z6_Z7
Build number : Z3_Z6_Z7 20120517-214652
Build date UTC : 20120517-134652
Android v : 2.3.5
Baseband v:
MAUI.11AMD.W11.37.SP.V4, 2011/10/22 02:48
, flashed - boot, recovery, system. All good - phone is ON. But - No netwrok, no Wi-FI, no bleutooth.
Size of SEC_CO file is 1.1 mb. I think that the problem in it.
But i can't flash it. Flash_tool displays an error.
How can flash this file?
Backup file - w_w_w.4shared.com/zip/KOwWifV2/Z3_Z6_Z7_120517_backup_120908-.html?refurl=d1url
A fellow xda member just ask me to help port cwmr to the exact model you have & thats how i found your post...
to solve this problem is actual quite simple since you have it boot up back, just use the contain of firmware from ur backup, copy & paste the 6 files back to /system/etc/firmware via any Root Explorer, reboot & you'll have ur phone back in full working condition... :good:
If your backup is system.img then you'll need unyaffs to unpack it then only you'll see the firmware folder...
download it from here...extract it, make a folder & put system.img there; at command prompt, unyaffs system.img will unpack system.img...
Hope this help...
Root
Hi, I have a similar phone, a called mini G22.
Is there a way to root this phone? I've been trying everything from z4root, to superoneclick, to adb method, to gingerbreak.
Please help!!
Thanks
Decio
Hi Decio,
Upon checking on the www, i got a mix response from it, some reported as MTK6515, MT6573 & even MT6577...
Can you confirm its really MT6573 if not use this app to identify ur cpu...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If its MT6573 then u can use my updated mt6573 cwmr root & D.I.Y...
yuweng said:
Hi Decio,
Upon checking on the www, i got a mix response from it, some reported as MTK6515, MT6573 & even MT6577...
Can you confirm its really MT6573 if not use this app to identify ur cpu...
If its MT6573 then u can use my updated mt6573 cwmr root & D.I.Y...
Click to expand...
Click to collapse
Hi Yuweng, thanks for the answer. I ran the /cat/proc/cpuinfo and got this:
$ cat /proc/cpuinfo
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1998.84
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
Does your solution work with MT6575 also?
Thanks!!
Wow, this thread has go beyond its title...
You can check out my threads under my signature for MT6577 & i believe it should work for MT6575 too... :fingers-crossed:
You never try, you'll never know...:laugh: All my thread now is with the red WARNING & it will be sticky so pls take note...
You can post your question there... :good:
Since AlexChip here couldn't be bother, i'm like stealing you to my thread.... :laugh:

[Q] Touch Screen Problem (Clicks itself)

Hi Everyone,
I Bought this Chinese Tablet from my Local Store.I'm Using this Tablet from past 5 Months. It was working excellent.
But all of a sudden during the past few days my Tablet has been clicking and opening apps on its own. Even if i Rotate, the screen is Rotated and still it clicks back if any application is running and opens other app. I also tried bending it * i know sounds foolish, but it was irritating me. As if my Tablet was possessed... lol*
While charging the screen touch works normal.
2 Videos Uploaded. You can see the issue by self, what i mean to say. (sorry for the poor quality. i Enabled Show Touches, you can see multiple round white spots which auto clicks itself).
TABLET AUTO CLICKS - CLIP 1
TABLET AUTO CLICKS - CLIP 2
Tablet Pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Configuration of My Tablet is mention below. Below. Please Suggest if i can use any ROM.
----------------------
Main nfo
----------------------
Android Version 4.0.3
Processor: softwinner crane (ARMv7 Processor rev 2(v7l)
Resolution 600x976
Renderer: Mali MP
Max Texture sie: 4096
1 Ghz CPU
----------------------
Battery Info
----------------------
Level: 52
Scale: 100
Temperature: 30.0C, 111.60F
Technology: LiFe
Voltage: 3V
Battery present: true
Status: charging
Plugged status: plugged into AC
Health: good
----------------------
Build Info
----------------------
Board: crane
Boot Loader: unknown
Brand: softwinners
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
Device: crane-evb
Display: crane_evb-eng 4.0.3 IML74K 20120331 test-keys
Fingerprint: softwinners/crane_evb/
crane-evb:4.0.3/
IML74K/20120331:eng/test-keys
Hardware: sun4i
Host: Linux
Id: IML74K
Manufacturer: unknown
Model: T10A
Product: crane_evb
Serial: 520e36f6f78cb3
Tags: test-keys
Time: 1333153702000
User: android3
----------------------
Build Version
----------------------
Codename: REL
Incremental: 20120331
Release: 4.0.3
Sdk: 15
SDK_INT: 15
----------------------
Config Info
----------------------
Font Scale: 1.0
Locale: en_US
Mobile Country Code: 0
Mobile Network Code: 0
Keyboard: None
Keyboard hidden: NO
Hard keyboard hidden: NO
Available navigation: None
Is navigation hidden: YES
Orientation: Landscape
Screen layout: large not long
Touch screen: Finger
UI Mode: normal not night mode
----------------------
File System Info
----------------------
External Storage Size: 7.38GB
Available (user): 0.60GB
Available (all): 0.60G
B
External storage directory: /mnt/sdcard
Storage state: mounted
Data directory: /data
Root directory: /system
Download cache directory: /cache
----------------------
System Properties Info
----------------------
android.icu.library.version: 4.6
android.icu.unicode.version: 6.0
android.openssl.version: OpenSSL 1.0.0e 6 Sep 2011
android.zlib.version: 1.2.5
file.encoding: UTF-8
file.separator: /
http.agent: Dalvik/1.6.0 (Linux; U; Android 4.0.3; T10A Build/IML74K)
java.boot.class.path: /system/
framework/core.jar:/system/
framework/core-junit.jar:/system/
framework/bouncycastle.jar:/system/
framework/ext.jar:/system/framework/
framework.jar:/system/
framework/android.policy.jar:/system/
framework/services.jar:/system/
framework/apache-xml.jar:/system/
framework/filterfw.jar
java.class.path: .
etc... etc............
I think this is an Software problem not hardware or is it a Virus? Does anyone know how to fix this?
Looks hardware issue, may e a contacto problem on button or screen.
Sent from my GT-I9100 using xda app-developers app
Hardware???? yes i feel some kind of static energy flows on display and becoz of that the screen auto clicks.... m saying this becoz while charging it doesnt make auto clicks. 3 months before this auto click was happening on charging and now this is like reversed.
Can anybody tell me can i update to CyanBook JellyBean or cyanogenmod
Please Help!

Unable to install clockwork Mod recovery... Q&A... Troubleshooting Help needed...

Hi
I have a rooted MTK 6577 phone (ZYNC Z5 Dual Core) on which i have already installed ROM manager but every time i launch rom manager it asks me to install clock mod recovery by by clicking okay to install it takes me to the next screen and tells me no clockwork mod recovery is not supported for this device.
Below is the information for my baseband and kernel version..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
e.daniel said:
hi
i have a rooted mtk 6577 phone (zync z5 dual core) on which i have already installed rom manager but every time i launch rom manager it asks me to install clock mod recovery by by clicking okay to install it takes me to the next screen and tells me no clockwork mod recovery is not supported for this device.
Below is the information for my baseband and kernel version..
View attachment 2342346
Click to expand...
Click to collapse
bro..itz normal rom manager shows this error only for our mediatek devices... Better yu can google or search in xda for cwm/twrp and den flash it via sp tools /uncletools
Thanks siva aggzz for your reply,
I had been looking over forf correct version of clockworkMOD but am unable to find one....
Also when the install on rom manager fails it gives me an option for manual install and lists 2 version of CWM
2.* &
3.*
If you an guide me as to which one would go best with mediatek 6577.
Sorry for OOT
can anyone tell me what's CWM that contain a "wipe battery stats" feature
sorry for bad english
E.Daniel said:
Thanks siva aggzz for your reply,
I had been looking over forf correct version of clockworkMOD but am unable to find one....
Also when the install on rom manager fails it gives me an option for manual install and lists 2 version of CWM
2.* &
3.*
If you an guide me as to which one would go best with mediatek 6577.
Click to expand...
Click to collapse
Welcome... Bro every mt6577 have dffrent cwms... None of dem wrk in more den one phone... Wat is ur model no n manufcturer? Sae me... Il find n gve yu d link
hit thanks rather liking
send from lava iris 455 DARK JELLY rom
how to install cwm on sony tipo?
siva aggzz said:
Welcome... Bro every mt6577 have dffrent cwms... None of dem wrk in more den one phone... Wat is ur model no n manufcturer? Sae me... Il find n gve yu d link
hit thanks rather liking
send from lava iris 455 DARK JELLY rom
Click to expand...
Click to collapse
Manufacturer and model is ZYNC Z5 Dual core also i am pasting the baseband and kernel info again let me know if you need any other info from me
Can anyone help me to install clockwork mod on karbonn a29..
Details are
TYPE SPECIFICATION
Embedded Processor (SoC)
Model ARM Cortex-A9
Family ARM
Architecture ARM Cortex-A9
CPUID 000000004137C090
CPU Revision r3p0
Core Count 2(2)+0(0)
Frequency 1001 MHz
Frequency (Min) 250 MHz
Frequency (Max) 1209 MHz
Process Unknown
Video Controller (GPU)
Vendor Imagination Technologies
Model PowerVR SGX 531
LCD Panel
Screen Resolution (pixels) 960 x 540 px
DPI (Dot per inch) 240 dpi
Integrated Memory
RAM (Memory available for the CPU) 469 MB
Flash (Stockage) 1008 MB
Device
Manufacturer Karbonn
Model A29
Product a29
Android Version 4.1.2
Linux Kernel 3.4.0 (eng.root.1372662965)
Root Access yes
Embedded Sensors (0) bma222 3-axis Accelerometer
Embedded Sensors (1) tmd2771 Proximity Sensor
Embedded Sensors (2) tmd2771 Light Sensor
Sent from my A29

Need help finding firmware for Android TV box

I purchased an Android TV box, and it was already rooted, however it was rooted poorly, and I am unable to install a superuser, or access the google play store, or open most apps without them crashing. My friend has the same box, and he has no issues, so I think that mine was just flashed poorly.
I have been looking for new firmware to reflash the device. I don't care about it being the same exact firmware, but obviously I want it to be compatible. I noticed that the ad boasts a 64 bit system, and the version of Android that is installed is 32 bit, so a 64 bit firmware that would be compatible would be ideal.
The device I have is a:
GooBang Doo 2017 ABOX A3 Android 6.0 TV Box with Amlogic S912 Octa-Core 64-bit ARM Cortex A53 CPU
CPU: Amlogic S912 Octa-core 2GHz 64-bit ARM Cortex A53 CPU
GPU: 750MHz+ ARM Mali-820MP3 GPU processor
RAM: 2GB DDR3
ROM: 16GB eMMC
USB: 2*2.0, DISK & HDD
Card reader: SD card
GPU: Mali-T820
Android Version: 6.0.1 (Marshmallow)
Build: ABOX-III-6.0.1-201701171656
API: 23
Security Patch: August 1, 2016
Architecture: armv8l (32-bit)
Kernel: Linux Version 3.14.29 ([email protected]) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #6 SMP PREEMPT Tue Jan 17 16:58:05 CST 2017
Support the latest HEVC (H.265)&VP9 decoding
Support 4K*2K Super HD video
HDR support
SPDIF output
OS: Android 6.0
Wi-Fi: IEEE 802.11 a/b/g/n - Dual band Wi-Fi 5Ghz and 2.4Ghz
Bluetooth: V4.0
Wired/wireless mouse/keyboard supported
Supports Airplay/Miracast/DLNA & H.265
Supports Decoder formats: HD MPEG1/2/4,H.265,4K-HD,HD AVC/VC-1,RM/RMVB,Xvid/DivX3/4/5/6,RealVideo8/9/10
Supports Media formats: Avi/Rm/Rmvb/Ts/Vob/Mkv/Mov/ISO/wmv/asf/flv/dat/mpg/mpeg
Supports Music format: MP3/WMA/AAC/WAV/OGG/AC3/DDP/TrueHD/DTS/DTS/HD/FLAC/APE
Supports Photo formats: HD JPEG/BMP/GIF/PNG/TIFF
Supports Subtitles: SRT/SMI/SUB/SSA/IDX+USB
Any help is greatly appreciated.
I have an ABOX A1 and have had success using Fritz Public Repo. Check out the A3 folder here: https://mega.nz/#F!F9xjTSSa!R0vJfTC2U6Qc2skNMrr1iQ
You should also check out the http://freaktab.com community.
mrlaugh01 said:
I have an ABOX A1 and have had success using Fritz Public Repo. Check out the A3 folder here: https://mega.nz/#F!F9xjTSSa!R0vJfTC2U6Qc2skNMrr1iQ
You should also check out the http://freaktab.com community.
Click to expand...
Click to collapse
have you bricked abox ? did you use pins metod ?
i have a problem with GooBang Doo ABOX A1 im searching for the firmware but no luck
no short pins metod works - when i short pins and connect to pc box work usb burning connect a1 plus but always error
[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
i have tons of firmware any is that same error i change cables computers
I have done the most short cable plug male-plug male no cable and same error :/ ....... nothing work
I get error no matter what i do of any firmware. Mayby original chip has been damaged shortening two pins trying to put the device in mask rom mode ?!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
There’s still a chance to flash if it is being recognized in USB Burner application. I know when burning, be sure to uncheck the Bootloader option. Also if using Windows, be sure to open ‘As Administrator’. Also try loading the ROM in the USB burner app before plugging in device. I personally have not had to preform the ‘short pin’ method as I haven’t bricked it. You should only use the ‘shortting pin’ method when the device isn’t recognized with USB and/or showing no signs of power. Good luck!
Hi i am looking for the same firmware i.e for abox a3. I cant fund it anywhere. Please share the firmware if you have found it.
Sent from my SM-A505F using Tapatalk

need help trying to root Chinise smart phone ( M10S )

Was hopeing that some of you root Guru's could lend me some help with this one. Trying desperatly to get rid of bloatware on this phone and a few dubious akp's. Any help here would be apprecated.
Things i have tried:
I have tryed to gain root with towelroot, kingroot, and a few other root apps from pc and apk's .
Kingroot detects the phone as 6.0 android. dont know if this matters or not.
ADB seems to be working and detects the phone, ADB fastboot drivers are installed.
I can access the phones file system from pc. Nothing seems to be able to root this device.
Details of phone:
Chinese brand M10
image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Multi Function: Wifi, GPS, Gravity Sensor, Alarm ,Calendar ,Calculator ,Audio recorder ,Video recorder, WAP/MMS/GPRS, Image viewer,E-Book,World clock,Tasks
Specifications:
board: sp7731gea
sensors: (mxc622x) Memsic MX-C622X 2-axis Accelerometer, FT6206 Proximity sensor
Hardware: sp7731g_z1_32V4_b18_gt_gt028g_m10_zx_m432_-drv
CPU: ARMv7 rev. 5 (v7l) 4core
OS Build: Marshmellow 6.0
API level: 23
Build id: MRA58K
Build time: Tues May 21 00:00:02 PDT 2019
Fingerprint: 4G/sp77713g_z1_32V4_b18_gt_gt028g_4g_x
Standby: Dual SIM Dual Standby Support tf card expansion
Screen: 854*480
Speaker: 1511 Box Speaker
Frequency: GSM:800/900/1800/1900,WCDMA:850/2100
Vibration/Motor: Support
Memory:512MB+4GB
Multi Media: MP3/MP4/3GP/FM Radio/Bluetooth
Camera: 200w+200w
Others: FOR Android
Battery: 1700mAh
Size: 145*70MM
model: M10 5.0 inch 3G Smartphone 512MB RAM 4G ROM 1700mAh Android 6.0
Groot_i_am said:
Was hopeing that some of you root Guru's could lend me some help with this one. Trying desperatly to get rid of bloatware on this phone and a few dubious akp's. Any help here would be apprecated.
Things i have tried:
I have tryed to gain root with towelroot, kingroot, and a few other root apps from pc and apk's .
Kingroot detects the phone as 6.0 android. dont know if this matters or not.
ADB seems to be working and detects the phone, ADB fastboot drivers are installed.
I can access the phones file system from pc. Nothing seems to be able to root this device.
Details of phone:
Chinese brand M10
image:
Features:
Multi Function: Wifi, GPS, Gravity Sensor, Alarm ,Calendar ,Calculator ,Audio recorder ,Video recorder, WAP/MMS/GPRS, Image viewer,E-Book,World clock,Tasks
Specifications:
board: sp7731gea
sensors: (mxc622x) Memsic MX-C622X 2-axis Accelerometer, FT6206 Proximity sensor
Hardware: sp7731g_z1_32V4_b18_gt_gt028g_m10_zx_m432_-drv
CPU: ARMv7 rev. 5 (v7l) 4core
OS Build: Marshmellow 6.0
API level: 23
Build id: MRA58K
Build time: Tues May 21 00:00:02 PDT 2019
Fingerprint: 4G/sp77713g_z1_32V4_b18_gt_gt028g_4g_x
Standby: Dual SIM Dual Standby Support tf card expansion
Screen: 854*480
Speaker: 1511 Box Speaker
Frequency: GSM:800/900/1800/1900,WCDMA:850/2100
Vibration/Motor: Support
Memory:512MB+4GB
Multi Media: MP3/MP4/3GP/FM Radio/Bluetooth
Camera: 200w+200w
Others: FOR Android
Battery: 1700mAh
Size: 145*70MM
model: M10 5.0 inch 3G Smartphone 512MB RAM 4G ROM 1700mAh Android 6.0
Click to expand...
Click to collapse
Why don't you patch the img with magisk and push the patched img with ADB to your boot partition
([emoji3590]09-09-18[emoji813])
PoochyX said:
Why don't you patch the img with magisk and push the patched img with ADB to your boot partition
([emoji3590]09-09-18[emoji813])
Click to expand...
Click to collapse
I have never tried or attempted this before could you provide a link so i may read up on how to do this, Thank you for your help.

Categories

Resources