I purchased an Android TV box, and it was already rooted, however it was rooted poorly, and I am unable to install a superuser, or access the google play store, or open most apps without them crashing. My friend has the same box, and he has no issues, so I think that mine was just flashed poorly.
I have been looking for new firmware to reflash the device. I don't care about it being the same exact firmware, but obviously I want it to be compatible. I noticed that the ad boasts a 64 bit system, and the version of Android that is installed is 32 bit, so a 64 bit firmware that would be compatible would be ideal.
The device I have is a:
GooBang Doo 2017 ABOX A3 Android 6.0 TV Box with Amlogic S912 Octa-Core 64-bit ARM Cortex A53 CPU
CPU: Amlogic S912 Octa-core 2GHz 64-bit ARM Cortex A53 CPU
GPU: 750MHz+ ARM Mali-820MP3 GPU processor
RAM: 2GB DDR3
ROM: 16GB eMMC
USB: 2*2.0, DISK & HDD
Card reader: SD card
GPU: Mali-T820
Android Version: 6.0.1 (Marshmallow)
Build: ABOX-III-6.0.1-201701171656
API: 23
Security Patch: August 1, 2016
Architecture: armv8l (32-bit)
Kernel: Linux Version 3.14.29 ([email protected]) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #6 SMP PREEMPT Tue Jan 17 16:58:05 CST 2017
Support the latest HEVC (H.265)&VP9 decoding
Support 4K*2K Super HD video
HDR support
SPDIF output
OS: Android 6.0
Wi-Fi: IEEE 802.11 a/b/g/n - Dual band Wi-Fi 5Ghz and 2.4Ghz
Bluetooth: V4.0
Wired/wireless mouse/keyboard supported
Supports Airplay/Miracast/DLNA & H.265
Supports Decoder formats: HD MPEG1/2/4,H.265,4K-HD,HD AVC/VC-1,RM/RMVB,Xvid/DivX3/4/5/6,RealVideo8/9/10
Supports Media formats: Avi/Rm/Rmvb/Ts/Vob/Mkv/Mov/ISO/wmv/asf/flv/dat/mpg/mpeg
Supports Music format: MP3/WMA/AAC/WAV/OGG/AC3/DDP/TrueHD/DTS/DTS/HD/FLAC/APE
Supports Photo formats: HD JPEG/BMP/GIF/PNG/TIFF
Supports Subtitles: SRT/SMI/SUB/SSA/IDX+USB
Any help is greatly appreciated.
I have an ABOX A1 and have had success using Fritz Public Repo. Check out the A3 folder here: https://mega.nz/#F!F9xjTSSa!R0vJfTC2U6Qc2skNMrr1iQ
You should also check out the http://freaktab.com community.
mrlaugh01 said:
I have an ABOX A1 and have had success using Fritz Public Repo. Check out the A3 folder here: https://mega.nz/#F!F9xjTSSa!R0vJfTC2U6Qc2skNMrr1iQ
You should also check out the http://freaktab.com community.
Click to expand...
Click to collapse
have you bricked abox ? did you use pins metod ?
i have a problem with GooBang Doo ABOX A1 im searching for the firmware but no luck
no short pins metod works - when i short pins and connect to pc box work usb burning connect a1 plus but always error
[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
i have tons of firmware any is that same error i change cables computers
I have done the most short cable plug male-plug male no cable and same error :/ ....... nothing work
I get error no matter what i do of any firmware. Mayby original chip has been damaged shortening two pins trying to put the device in mask rom mode ?!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
There’s still a chance to flash if it is being recognized in USB Burner application. I know when burning, be sure to uncheck the Bootloader option. Also if using Windows, be sure to open ‘As Administrator’. Also try loading the ROM in the USB burner app before plugging in device. I personally have not had to preform the ‘short pin’ method as I haven’t bricked it. You should only use the ‘shortting pin’ method when the device isn’t recognized with USB and/or showing no signs of power. Good luck!
Hi i am looking for the same firmware i.e for abox a3. I cant fund it anywhere. Please share the firmware if you have found it.
Sent from my SM-A505F using Tapatalk
Related
Hi Everyone,
I Bought this Chinese Tablet from my Local Store.I'm Using this Tablet from past 5 Months. It was working excellent.
But all of a sudden during the past few days my Tablet has been clicking and opening apps on its own. Even if i Rotate, the screen is Rotated and still it clicks back if any application is running and opens other app. I also tried bending it * i know sounds foolish, but it was irritating me. As if my Tablet was possessed... lol*
While charging the screen touch works normal.
2 Videos Uploaded. You can see the issue by self, what i mean to say. (sorry for the poor quality. i Enabled Show Touches, you can see multiple round white spots which auto clicks itself).
TABLET AUTO CLICKS - CLIP 1
TABLET AUTO CLICKS - CLIP 2
Tablet Pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Configuration of My Tablet is mention below. Below. Please Suggest if i can use any ROM.
----------------------
Main nfo
----------------------
Android Version 4.0.3
Processor: softwinner crane (ARMv7 Processor rev 2(v7l)
Resolution 600x976
Renderer: Mali MP
Max Texture sie: 4096
1 Ghz CPU
----------------------
Battery Info
----------------------
Level: 52
Scale: 100
Temperature: 30.0C, 111.60F
Technology: LiFe
Voltage: 3V
Battery present: true
Status: charging
Plugged status: plugged into AC
Health: good
----------------------
Build Info
----------------------
Board: crane
Boot Loader: unknown
Brand: softwinners
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
Device: crane-evb
Display: crane_evb-eng 4.0.3 IML74K 20120331 test-keys
Fingerprint: softwinners/crane_evb/
crane-evb:4.0.3/
IML74K/20120331:eng/test-keys
Hardware: sun4i
Host: Linux
Id: IML74K
Manufacturer: unknown
Model: T10A
Product: crane_evb
Serial: 520e36f6f78cb3
Tags: test-keys
Time: 1333153702000
User: android3
----------------------
Build Version
----------------------
Codename: REL
Incremental: 20120331
Release: 4.0.3
Sdk: 15
SDK_INT: 15
----------------------
Config Info
----------------------
Font Scale: 1.0
Locale: en_US
Mobile Country Code: 0
Mobile Network Code: 0
Keyboard: None
Keyboard hidden: NO
Hard keyboard hidden: NO
Available navigation: None
Is navigation hidden: YES
Orientation: Landscape
Screen layout: large not long
Touch screen: Finger
UI Mode: normal not night mode
----------------------
File System Info
----------------------
External Storage Size: 7.38GB
Available (user): 0.60GB
Available (all): 0.60G
B
External storage directory: /mnt/sdcard
Storage state: mounted
Data directory: /data
Root directory: /system
Download cache directory: /cache
----------------------
System Properties Info
----------------------
android.icu.library.version: 4.6
android.icu.unicode.version: 6.0
android.openssl.version: OpenSSL 1.0.0e 6 Sep 2011
android.zlib.version: 1.2.5
file.encoding: UTF-8
file.separator: /
http.agent: Dalvik/1.6.0 (Linux; U; Android 4.0.3; T10A Build/IML74K)
java.boot.class.path: /system/
framework/core.jar:/system/
framework/core-junit.jar:/system/
framework/bouncycastle.jar:/system/
framework/ext.jar:/system/framework/
framework.jar:/system/
framework/android.policy.jar:/system/
framework/services.jar:/system/
framework/apache-xml.jar:/system/
framework/filterfw.jar
java.class.path: .
etc... etc............
I think this is an Software problem not hardware or is it a Virus? Does anyone know how to fix this?
Looks hardware issue, may e a contacto problem on button or screen.
Sent from my GT-I9100 using xda app-developers app
Hardware???? yes i feel some kind of static energy flows on display and becoz of that the screen auto clicks.... m saying this becoz while charging it doesnt make auto clicks. 3 months before this auto click was happening on charging and now this is like reversed.
Can anybody tell me can i update to CyanBook JellyBean or cyanogenmod
Please Help!
Just bought this ultra-cheap Android phone on CD-R KING in the Philippines.
Seems I can't post URLs on this forum yet, but just go to the CD-R KING homepage and search for B1-EP2.
2580 Philippine pesos = 63.45252 U.S. dollars
2580 Philippine pesos = 48.8021228 Euros
Sim Cards: Dual Sim Cards(dual standby)
Band: Dual Band
Network: GSM 850/900Mhz/1800/1900MHz
Size: 6.2cm x 11.8cm
Display: 4.0" Touch Screen
Resolution: 480*800 pixels
Touch Lens: Capacitive Multi-touch Lens
Internal Memory: 1GB+256MB
CPU Frequency: 1.5Ghz
Camera: Dual Camera
Front 0.3MP/Back 2MP)
System: Android 4.0 (Ice Cream Sandwich)
With Wi-Fi Support(802.11 b/g)
Card Slot: T-Flash (Micro SD Card)
Yes, I know it is a China phone and yes, I know it is probably a pain in the but to root and find custom roms for, but still. It is damn CHEAP!
Anyways, I have tried to root this phone without success. I have tried SuperOneClick and other funky scripts I found online, but still no go.
I was hoping someone could give me some pointers when it comes to rooting these "no-name" china phones with custom firmwares.
This specific phone has some CD-R KING custom rom with Android 4.0.8.
They claim it has 1500mhz CPU, but I'm skeptical.
It's most likely has this CPU:
MT6573: ARM11 (ARMv6) CPU at 650 MHz / GPU: PowerVR SGX 531 / 3G,HSPA compatible
But I don't see any signs of 3G.
However, the phone is running pretty fine overall.
This is the info I get from "Android System Info":
Android version: 4.0.8
Release Codename: REL
API LEVEL: 10
CPU ABI: armeabi
Manufacturer: unknown
Bootloader: unknown
CPU ABI2: unknown
Hardware: mt6573
Radio: unknown
Board: vanzo13_gb
Brand: V3_I9300_C_2012.09.22
Device: B1-EP2
Display: B1-EP2 20130119-104424
Fingerprint: yusu/vanzo13_gb/vanzo13_gb:2.3.6/GRK39F/eng.tiankun.1358563433:user/test-keys
Host: tiankun-desktop
ID: GRK39F
Model: B1-EP2
Product: B1-EP2
Tags: test-keys
Type: user
User: tiankun
CPU:
Processor ARMv6-compatible processor rev 7 (v6l)
BogoMIPS 1594.90
Features swp half thumb fastmult vfp edsp java
CPU implementer 0x41
CPU architecture 7
CPU variant 0x0
CPU part 0xv76
CPU revision 7
Hardware MT6573
Revision 65fb8a00
Any help getting this device rooted would be appreciated.
Ok, I managed to root it
Now it's clear that it has a 650mhz CPU. However, it seems it is pre-clocked to 806mhz.
No luck with ClockWorkMod though. Is there some other recovery software that can be used with these China "no-name" phones?
exice said:
Ok, I managed to root it
Now it's clear that it has a 650mhz CPU. However, it seems it is pre-clocked to 806mhz.
No luck with ClockWorkMod though. Is there some other recovery software that can be used with these China "no-name" phones?
Click to expand...
Click to collapse
will you please share how did you managed to root said unit, ihave the same phone too.... tia
tony08xda said:
will you please share how did you managed to root said unit, ihave the same phone too.... tia
Click to expand...
Click to collapse
I'm not allowed to post URLs on this forum, but you will probably find it if you search for "RootTool_setup.exe" on Google. The icon should be blue with a shield on it. The program is in Chinese.
Please post all your findings in this thread, like when you manage to install a Recover tool or if some custom ROM works for you. Thanks.
usb host on b1-ep2
exice said:
I'm not allowed to post URLs on this forum, but you will probably find it if you search for "RootTool_setup.exe" on Google. The icon should be blue with a shield on it. The program is in Chinese.
Please post all your findings in this thread, like when you manage to install a Recover tool or if some custom ROM works for you. Thanks.
Click to expand...
Click to collapse
tony08xda and exice do you still have your b1-ep2 cdrking unit? can you run the usb diagnostics (www apkfulls com / download / usb-host-diagnostics-v1-2 . html) and describe if for some reason the it can act as a usb host using an otg. thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
matagal din ba xang malowbatt? and anong package ang kasama niya?
Hello everyone,
I am new here and like most posting a message for the first time I hope it's in the correct forum section.
For the record I have always been pretty good at researching things and figuring things out for myself but my current issue has me puzzled. Here is the issue:
I purchased a chinese Vivobox i3 rougly a year ago and for the most part it has worked well but has recently fallen short on its functionality.
After a recent power outage I came to find that the mini - air mouse remote stopped working except for 3 buttons which I found strange. I immediately thought no big deal just flip the box over and push the reset button and all will be good except pushing and holding the reset button then plugging in power cord didn't do anything except display a "safe mode" message in the bottom left of the screen after it booted up. This still didn't fix my problem with the remote. It still didn't work.
I went out and bought a new track pad / keypad combo unit thinking my old one had simply died but it didn't work at all.
So I tried using a USB mouse (which I should have done before buying a new wireless keypad at the begining) and it worked but things got more bizzar.
Using my mouse I setup my box (internet connection etc.) and came to find that all my downloaded apps were gone ( probably got wiped from memory ) and navigated to the Google playstore and tried downloading an app. The download appears to start by showing a progress bar but the progress bar never moves and it doesn't download any files. It stays in download mode and doesn't download anything, its weird I can check my hotmail visit plenty of pages but it will not download any android apps. Its as though the android firmware is corrupted.
In short, the box appears to have lost remote control functions, and the android functionality is all screwed up.
So this brings me to my current situation, I figured I would visit the vendor's website and get the newest firmware and flash mybox in hopes that it would correct things. I visited the vendors support website (vivobox.co) but the site is no longer up and there are no files anywhere online for this box.
With no files available I thought to try and root it and load a custom rom but I can't get the box to boot into android recovery mode to install the necessary files . I tried all manual methods I could think of but this box will not allow a boot into recovery mode. I then went online and downloaded Amlogic SD card maker.exe. Tried to create a boot recovery SD card and that failed. I tried everything.
The only thing that kinda worked was forcing a boot from SD card condition by using the shorting 2 pins method on the memory IC on the board inside with an SD card containing a complete image and firmware package for a mitricom box (found on XDA), except it freezes 1/4 of the way through the update.
In short I need to do one of 2 things, 1) find a way to manually enter android system recovery and root it to install a custom rom or 2) find a file that I can force boot with a compatible firmware.
Here are the specs. on my Vivobox i3 if anyone has any suggestions or has encountered this before.
ViVoBox i3 Android iptv spec:
Chipset: AML8726-M3 dual core
CPU: ARM Cortex A9 1-1.2GHz
GPU: Mail-400 250MHz 3D
OS: Google android 4.0
RAM: DDRIII 1GB
Flash: 4GB
Support SD card Up to 32GB
WiFi/RJ45 802.11 b/g /n , RJ45 10/100 BaseT *1
URL added Support
Decoder format H.264,MVC,MPEG-1/2/2,VC-1/WWW,AVS,RealVideo and MJPEG upto 1080p
Video support: RM/RMVB, MPEG, MKV, AVI, MP4,MOV,FLV, H.263,H.264,VC-1,DivX, Xvid, TS,RealVideo,VP6,VP8 up to 1080P support
Audio support: AAC-LC/HEAAC/HE-AAC v2,AC3,AMR NB,DTS,MP3,OGG,RA_COOK,WMA,WMA,LPCM/PCM/ADPCM,FLA
Video Output : 480i/p,576i/p,720i/p,1080i/p;3D Output
Adobe Flash: Adobe Flash 10.1 support or above
Language: 24 Language support, German, English, French, Italian, Japanese, Korean, Dutch, Portuguses, Swedish, Spanish
I/O interface: HDMIx1, USBx2, RJ45x1, LNBx2, SD Card x1
Power: DC 12V/2A
Regards and thanks in advance to all that will read and take an interest in this thread
:good:.
Here is a piture of my main board, if it helps
Here is a picture of my main board in the unit, hope this helps clear things up for anyone that might be trying to help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Plausible Deniability said:
Here is a picture of my main board in the unit, hope this helps clear things up for anyone that might be trying to help.
View attachment 2961942
Click to expand...
Click to collapse
I guess this isn't a popular board ,... or maybe I posted in the wrong section ?
Any input would be greatly appreciated.
Wow no takers on this one huh?
Well thanks to everyone who reviewed my post.
With no input from the community on this one I am gonna make it a dead request.
Moderators , please close down this thread. I'm gonna just replace my box.
All the best to all that read my thread.
Hi.
Remix OS for PC 64_B2016020201 Alpha Legacy.iso not runing in Dell Optiplex 755 (MT) Intel E C2D E6750 (Instruction Set:64-bit) but Remix OS for PC 32 B2016020101 Alpha_Legacy.iso is working in E6750
PC:
Dell Optiplex 755
Processzor: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (8 x 333)
Chipset:Intel®Q35 Express Chipset (ICH9DO)
Vga: Ati Radeon HD 4350 (RV710) work
(Vga:Integrated Intel®Graphics Media Accelerator 3100) work
Audio:ADI 1984 High Definition Audio work
RAM: 4GB
LAN: Intel(R) 82566DM-2 Gigabit Network Connection work
BIOS: Dell Inc. A22, 2012. 06. 11.
Recent installations Remix OS 2.0.205 (5.1.1-B201604001)
- Missing tarsh icon
- no background image
- right click on the desktop does not work
- File manager does not start
It is the amd graphics messing with the boot.
Orion116 said:
It is the amd graphics messing with the boot.
Click to expand...
Click to collapse
Hacked Edition v2.0.202 and basis v2.0.202 is working well .
I'll try again with another video card.
Vga: Ati Radeon HD 4350
Remix Os 2.0.202
http://imgur.com/l3wp5Sa
http://imgur.com/KonRfdl
GL Version: OpenGL ES 2.0 Mesa 11.0.9 (git-13c6cfa)
Remix Os 2.0.205 all
GL Version: OpenGL ES 2.0 Mesa 11.0.9 (git-fe41535)
- Missing tarsh icon/ Sometimes flashes and then disappears.
- no background image
- right click on the desktop does not work
- File manager does not start
Vga: Ati Radeon HD 4350
http://imgur.com/6zpTl6x
Vga:MSI N440GT MD1GD3
http://imgur.com/ZO5lWnp
Vga:Integrated Intel®Graphics Media Accelerator 3100 (Print screen not working )
http://imgur.com/E4WVJ9x
but everything works in USB mode
vga=Ati Radeon HD 4350
Remix os 2.0.205
GL Version: OpenGL ES 2.0 Mesa 11.0.9 (git-fe41535)
http://imgur.com/tQ1nmgS
"GL Version: OpenGL ES 2.0 Mesa 11.0.9 (git-fe41535)"
Mesa is OpenGL 3.1
Orion116 said:
"GL Version: OpenGL ES 2.0 Mesa 11.0.9 (git-fe41535)"
Mesa is OpenGL 3.1
Click to expand...
Click to collapse
This is a false info ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.mesa3d.org/intro.html
Orion116 said:
http://www.mesa3d.org/intro.html
Click to expand...
Click to collapse
I've seen this , but unfortunately the situation did not improve . Installed are not going to just usb mode .
Post and report your hardware and spec on http://forum.xda-developers.com/showthread.php?t=3337029
kretex said:
Post and report your hardware and spec on http://forum.xda-developers.com/showthread.php?t=3337029
Click to expand...
Click to collapse
Clean install in "new" drive and working
Dell Optiplex 755
Processzor: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (8 x 333)
Chipset:Intel®Q35 Express Chipset (ICH9DO)
Vga 1: Ati Radeon HD 4350 (RV710) work , HDMI audio NOT WORKING
Vga 2: MSI N440GT-MD1GD3/LP work, HDMI audio NOT WORKING
(Vga:Integrated Intel®Graphics Media Accelerator 3100) work
Audio:ADI 1984 High Definition Audio work
RAM: 4GB
HDD: Western Digital WD1600AAJS-00V4A0 DCM HHNNNTJMHN 3.5" 160 GB SATA
LAN: Intel(R) 82566DM-2 Gigabit Network Connection work
BIOS: Dell Inc. A22, 2012. 06. 11.
Please check the writing speed of your flash drive, flash drives with low writing speeds may not be able to support the boot process. It is recommended to use USB 3.0 flash drives with a read/write speed of 20MB/s and above. Do note that it takes up to 15 minutes to boot up for the first use after installation of Remix OS for PC. For more information on installing remix os on Dell Optiplex systems in Dell Optiplex 755 Manual- guideusermanual.com/product-name-optiplex-755-manual&po=344813&lang=English . Good Luck.
Remix os black display after boot logo on my dell optiplex 780 core2duo e6750 2gb ram...
..
Was hopeing that some of you root Guru's could lend me some help with this one. Trying desperatly to get rid of bloatware on this phone and a few dubious akp's. Any help here would be apprecated.
Things i have tried:
I have tryed to gain root with towelroot, kingroot, and a few other root apps from pc and apk's .
Kingroot detects the phone as 6.0 android. dont know if this matters or not.
ADB seems to be working and detects the phone, ADB fastboot drivers are installed.
I can access the phones file system from pc. Nothing seems to be able to root this device.
Details of phone:
Chinese brand M10
image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Multi Function: Wifi, GPS, Gravity Sensor, Alarm ,Calendar ,Calculator ,Audio recorder ,Video recorder, WAP/MMS/GPRS, Image viewer,E-Book,World clock,Tasks
Specifications:
board: sp7731gea
sensors: (mxc622x) Memsic MX-C622X 2-axis Accelerometer, FT6206 Proximity sensor
Hardware: sp7731g_z1_32V4_b18_gt_gt028g_m10_zx_m432_-drv
CPU: ARMv7 rev. 5 (v7l) 4core
OS Build: Marshmellow 6.0
API level: 23
Build id: MRA58K
Build time: Tues May 21 00:00:02 PDT 2019
Fingerprint: 4G/sp77713g_z1_32V4_b18_gt_gt028g_4g_x
Standby: Dual SIM Dual Standby Support tf card expansion
Screen: 854*480
Speaker: 1511 Box Speaker
Frequency: GSM：800/900/1800/1900，WCDMA：850/2100
Vibration/Motor: Support
Memory:512MB+4GB
Multi Media: MP3/MP4/3GP/FM Radio/Bluetooth
Camera: 200w+200w
Others: FOR Android
Battery: 1700mAh
Size: 145*70MM
model: M10 5.0 inch 3G Smartphone 512MB RAM 4G ROM 1700mAh Android 6.0
Groot_i_am said:
Was hopeing that some of you root Guru's could lend me some help with this one. Trying desperatly to get rid of bloatware on this phone and a few dubious akp's. Any help here would be apprecated.
Things i have tried:
I have tryed to gain root with towelroot, kingroot, and a few other root apps from pc and apk's .
Kingroot detects the phone as 6.0 android. dont know if this matters or not.
ADB seems to be working and detects the phone, ADB fastboot drivers are installed.
I can access the phones file system from pc. Nothing seems to be able to root this device.
Details of phone:
Chinese brand M10
image:
Features:
Multi Function: Wifi, GPS, Gravity Sensor, Alarm ,Calendar ,Calculator ,Audio recorder ,Video recorder, WAP/MMS/GPRS, Image viewer,E-Book,World clock,Tasks
Specifications:
board: sp7731gea
sensors: (mxc622x) Memsic MX-C622X 2-axis Accelerometer, FT6206 Proximity sensor
Hardware: sp7731g_z1_32V4_b18_gt_gt028g_m10_zx_m432_-drv
CPU: ARMv7 rev. 5 (v7l) 4core
OS Build: Marshmellow 6.0
API level: 23
Build id: MRA58K
Build time: Tues May 21 00:00:02 PDT 2019
Fingerprint: 4G/sp77713g_z1_32V4_b18_gt_gt028g_4g_x
Standby: Dual SIM Dual Standby Support tf card expansion
Screen: 854*480
Speaker: 1511 Box Speaker
Frequency: GSM：800/900/1800/1900，WCDMA：850/2100
Vibration/Motor: Support
Memory:512MB+4GB
Multi Media: MP3/MP4/3GP/FM Radio/Bluetooth
Camera: 200w+200w
Others: FOR Android
Battery: 1700mAh
Size: 145*70MM
model: M10 5.0 inch 3G Smartphone 512MB RAM 4G ROM 1700mAh Android 6.0
Click to expand...
Click to collapse
Why don't you patch the img with magisk and push the patched img with ADB to your boot partition
([emoji3590]09-09-18[emoji813])
PoochyX said:
Why don't you patch the img with magisk and push the patched img with ADB to your boot partition
([emoji3590]09-09-18[emoji813])
Click to expand...
Click to collapse
I have never tried or attempted this before could you provide a link so i may read up on how to do this, Thank you for your help.