Hey Folks,
Hoping someone has come across this before -
Rooted Droid Razr running cm-10.1-20130309-NIGHTLY-spyder, flashed fine and boots successfully.
However, if I then flash JB-4.2-Gapps-signed - marketed for 'All Devices', I get the msg "com.google.process.gapps has stopped" and then "Setup Wizard has stopped" as soon as the phone boots into CM.
To get back to running cm-10.1-20130309-NIGHTLY-spyder I have to re-flash stock OTA, re-root and re-flash CM10.1.
Does anyone know a Gapps package that will install on this build?
Cheers, Arkoze
Solution
arkoze said:
Does anyone know a Gapps package that will install on this build?
Click to expand...
Click to collapse
fixed.
gapps downloaded from here 10.1 is the top one http://goo.im/gapps
Help
I tried installing the same 4.2.2 but never got out of bootstrap. Can you please help. See me previous post.
I know its probably annoying to help out someone that doesn't know what they are doing, but im begging!
Related
Hi all,
I am not able to get my photon connected to CDMA WS after flashing with CM9 RoM have tried with 0.5.2 and 0.6.0 and 0.6.1.
Have checked in device manager the correct port and CDMA WS connects to the port but not able to read from phone ?
Pl help.Due to this i am not not in a position to dump the new PRL update file / NV Dump file after flashing with new RoM
is this the first rom you flashed on your photon? if not i suggest going back to your previous rom or try another one i have experienced problems with cm9 also try aokp
OrAmerika said:
is this the first rom you flashed on your photon? if not i suggest going back to your previous rom or try another one i have experienced problems with cm9 also try aokp
Click to expand...
Click to collapse
Same issue was there when i flashed Roms using KS (tried CNA,CM9) and tried MUI Rom also still not use. But i was able to use it on stock RoM
If you are getting the force close upon the phone starting resulting in no service, this is normal with the ICS based roms. The last rebase joker did was on version 3.1. Installing anything after that only once will cause this issue. You can do one of three things to remedy this...
1: Use the Kitchen Sink Rom
2: Flash .3.1 first, then the latest version.
3: Flash the latest version, then immediately flash it again. Then install your gapps.
Also, make sure you have Jokers CWM.
Same issue
I was having the same issue, except right when my phone booted up it kept giving me the message that android.process.phone has stopped working, and it wouldn't let me connect to the mobile data network either.
Acvice said:
If you are getting the force close upon the phone starting resulting in no service, this is normal with the ICS based roms. The last rebase joker did was on version 3.1. Installing anything after that only once will cause this issue. You can do one of three things to remedy this...
1: Use the Kitchen Sink Rom
2: Flash .3.1 first, then the latest version.
3: Flash the latest version, then immediately flash it again. Then install your gapps.
Click to expand...
Click to collapse
Not able to find .3.1 can you pl direct me to the download site.
Akhileshjj said:
Not able to find .3.1 can you pl direct me to the download site.
Click to expand...
Click to collapse
It's in the CM9/MIUI fixes thread in the development section, one of the stickies by th3bill
Sent from the back of a MoPhoKing AOKP Unicorn
bullfrog527 said:
It's in the CM9/MIUI fixes thread in the development section, one of the stickies by th3bill
Sent from the back of a MoPhoKing AOKP Unicorn
Click to expand...
Click to collapse
thanks got it.
I just spent the last 6 hours figuring this out and go figure it would be in the Q&A section... Did a fresh stock flash, factory wipe, format cache, dalvik and system. Installed .3.1. Then ONLY wiped the dalvik cache and upgraded to the 6.1 i would stop getting the com.android.phone FC. If i did the factory wipe it would start FCing again.
cdma
akhilesh can you tell me how did you make the cdma work intially on your photon i tried all the methods told by farookhjii and it didnt work
sibin.mohan said:
akhilesh can you tell me how did you make the cdma work intially on your photon i tried all the methods told by farookhjii and it didnt work
Click to expand...
Click to collapse
are you asking about CDMA in india ?
hi, new to xda-developers..sorry if this is the wrong area to post this. It won't let me post in the Rom Padawan6.2 thread. I have a problem with after flashing padawan6.2 then rebooting and waiting the 10mins then rebooting to cwm to install the addon Note2 i717. When rebooting after the installment. I get an error saying 1%$6 UI is not responding would you like to close.. it just gets stuck there and i can't press anything. I did a factory wipe reset and just flashed padawan6.2 rom itself and it works fine, but when i flash the addon Note2 i717 i get that error. Any help or pointing me to the proper place to post this would be appreciated, thanks.
ahlex said:
hi, new to xda-developers..sorry if this is the wrong area to post this. It won't let me post in the Rom Padawan6.2 thread. I have a problem with after flashing padawan6.2 then rebooting and waiting the 10mins then rebooting to cwm to install the addon Note2 i717. When rebooting after the installment. I get an error saying 1%$6 UI is not responding would you like to close.. it just gets stuck there and i can't press anything. I did a factory wipe reset and just flashed padawan6.2 rom itself and it works fine, but when i flash the addon Note2 i717 i get that error. Any help or pointing me to the proper place to post this would be appreciated, thanks.
Click to expand...
Click to collapse
I don't believe the note 2 add on has been updated yet for padawn over 6+. It is meant for version 5.
The note2zip is for padawan v5 and below, padawan v6 already comes with the theme
daav14 said:
The note2zip is for padawan v5 and below, padawan v6 already comes with the theme
Click to expand...
Click to collapse
Alright, thanks guys.. appreciate the response
I updated cynaogen to a experimental version, had problems went back to nightly. Then my play store was missing. I attempted to flash gapps and when rebooting the phone. It loads a screen with the droid logo, reading welcome to SCH-1535. Touch the android to begin and when I do it gives me an error unfortunately set wizard has stopped.
I tried to wipe data and reboot. Does not work.
Please please help
you flashed the wrong gapps
Glebun said:
you flashed the wrong gapps
Click to expand...
Click to collapse
WHich gapps do i need?????????
the ones for the android version you're flashing.
One question mark is enough
Glebun said:
the ones for the android version you're flashing.
One question mark is enough
Click to expand...
Click to collapse
Sorry! So i use gapps for Samsung Galaxy s #, or jelly bean (that is what was on the phone before I messed it up) or gapps for cyanogen 10? The phone attempts to load cyanogen then goes to the setup screen.
Would it be an option to flash back to original ROM?
I don't understand the question. CM is jellybean
Glebun said:
I don't understand the question. CM is jellybean
Click to expand...
Click to collapse
Does that mean I have to flash gapps for cyanogen 10?
If you flashed CM10, it's obvious that you need gapps for CM10
Glebun said:
If you flashed CM10, it's obvious that you need gapps for CM10
Click to expand...
Click to collapse
Actually I didn't flash anything. That's how I bought the phone. I don't know anything about flashing, but I really appreciate your help.
what's your point?
if you have CM10, it's obvious that you need gapps for CM10
im trying to flash beanstalk and when I flash GAPPS ive downloaded I get a FC stating that ASOP keyboard has stopped. I googled it and it appears that I have flashed the wrong GAPPS. can someone point me to the right direction?
thank you
amendolaro1 said:
im trying to flash beanstalk and when I flash GAPPS ive downloaded I get a FC stating that ASOP keyboard has stopped. I googled it and it appears that I have flashed the wrong GAPPS. can someone point me to the right direction?
thank you
Click to expand...
Click to collapse
http://goo.im/gapps
Grab the one that coordinates with your Android version.
mjones73 said:
http://goo.im/gapps
Grab the one that coordinates with your Android version.
Click to expand...
Click to collapse
gapps-jb-20130812-signed.zip should be the right ones... it's the ones I used with Beanstalk and they worked fine, if they still give you trouble try the gapps-jb-20130301-signed.zip version, that would be the one that ROM was originally intended to work with.
Remember if you change Gapps, you should wipe and reinstall, not just flash new ones overtop of the old...
Hi,
Can anybody let me know on how to downgrade my GT-I9100G device from CM11 to CM10.2 ?.
I upgraded to CM11 unofficial build, but then found lots of bugs and so want to revert back to CM10.2
Thanks.
srchandran_72 said:
Hi,
Can anybody let me know on how to downgrade my GT-I9100G device from CM11 to CM10.2 ?.
I upgraded to CM11 unofficial build, but then found lots of bugs and so want to revert back to CM10.2
Thanks.
Click to expand...
Click to collapse
just flash the cm10.2 build if you've root n have installed cwm,
nasheich said:
just flash the cm10.2 build if you've root n have installed cwm,
Click to expand...
Click to collapse
Thanks, doesn't seem like it was so simple. I had tried that many a times before posting this on to the forum. When I try to install CM10.2 again through CWM, it errors out with (Status 7) error. I did a Wipe/Factory Data Reset, Wipe Dalvik Cache and format system. Tried again but the same error re-appeared (status 7).
So I had to reinstall CM11 and GAPPS for CM11 again to make the phone work with some old bugs again . Camera not working, lag in screen rotation, stock browser not working etc.,
Thanks
srchandran_72 said:
Thanks, doesn't seem like it was so simple. I had tried that many a times before posting this on to the forum. When I try to install CM10.2 again through CWM, it errors out with (Status 7) error. I did a Wipe/Factory Data Reset, Wipe Dalvik Cache and format system. Tried again but the same error re-appeared (status 7).
So I had to reinstall CM11 and GAPPS for CM11 again to make the phone work with some old bugs again . Camera not working, lag in screen rotation, stock browser not working etc.,
Thanks
Click to expand...
Click to collapse
status 7 it's cause there's something wrong on the updater script in the Rom build, check the Rom Thread that you've download
nasheich said:
status 7 it's cause there's something wrong on the updater script in the Rom build, check the Rom Thread that you've download
Click to expand...
Click to collapse
Thanks, not sure on what the issue with the Rom could be. I have rooted the device and then installed Blazing Kernel V3 with CWM 6.
Before I decided to upgrade my phone to experimental CM11, I used to apply all CM10.2 Nightlies without any issues.
I have tried to install even CM10.1 stable release through CWM v.6 and the same error comes up.
Further, I have always downloaded ROM's from download.cyanogenmod.org/?device=i9100g or through the CMupdater in the phone.
Can you please let me know, what version of Blazing Kernel should I using on GT-i9100G and how do I flash it safely without fearing of the "Sleep of death" happening.
Thank you.
srchandran_72 said:
Thanks, not sure on what the issue with the Rom could be. I have rooted the device and then installed Blazing Kernel V3 with CWM 6.
Before I decided to upgrade my phone to experimental CM11, I used to apply all CM10.2 Nightlies without any issues.
I have tried to install even CM10.1 stable release through CWM v.6 and the same error comes up.
Further, I have always downloaded ROM's from download.cyanogenmod.org/?device=i9100g or through the CMupdater in the phone.
Can you please let me know, what version of Blazing Kernel should I using on GT-i9100G and how do I flash it safely without fearing of the "Sleep of death" happening.
Thank you.
Click to expand...
Click to collapse
I never use Gallaxy SII, dont know much about it
but, you can learn about your device by going to the SII thread, you'll find out more on there
nasheich said:
I never use Gallaxy SII, dont know much about it
but, you can learn about your device by going to the SII thread, you'll find out more on there
Click to expand...
Click to collapse
Thanks, can you please let me know the link to the GT-i1900G thread and also, on how can "post" a new question in the thread.
srchandran_72 said:
Thanks, can you please let me know the link to the GT-i1900G thread and also, on how can "post" a new question in the thread.
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s2
that should be the thread for your device
and for posting in a thread(speciallly in the dev thread), you must at least have more than 10 posting in whole xda thread
in general thread, you can post even you didn't have 10+ posting
please read the Rules of Xda for more detail about posting and everything