im trying to flash beanstalk and when I flash GAPPS ive downloaded I get a FC stating that ASOP keyboard has stopped. I googled it and it appears that I have flashed the wrong GAPPS. can someone point me to the right direction?
thank you
amendolaro1 said:
im trying to flash beanstalk and when I flash GAPPS ive downloaded I get a FC stating that ASOP keyboard has stopped. I googled it and it appears that I have flashed the wrong GAPPS. can someone point me to the right direction?
thank you
Click to expand...
Click to collapse
http://goo.im/gapps
Grab the one that coordinates with your Android version.
mjones73 said:
http://goo.im/gapps
Grab the one that coordinates with your Android version.
Click to expand...
Click to collapse
gapps-jb-20130812-signed.zip should be the right ones... it's the ones I used with Beanstalk and they worked fine, if they still give you trouble try the gapps-jb-20130301-signed.zip version, that would be the one that ROM was originally intended to work with.
Remember if you change Gapps, you should wipe and reinstall, not just flash new ones overtop of the old...
Related
Hi all,
I am not able to get my photon connected to CDMA WS after flashing with CM9 RoM have tried with 0.5.2 and 0.6.0 and 0.6.1.
Have checked in device manager the correct port and CDMA WS connects to the port but not able to read from phone ?
Pl help.Due to this i am not not in a position to dump the new PRL update file / NV Dump file after flashing with new RoM
is this the first rom you flashed on your photon? if not i suggest going back to your previous rom or try another one i have experienced problems with cm9 also try aokp
OrAmerika said:
is this the first rom you flashed on your photon? if not i suggest going back to your previous rom or try another one i have experienced problems with cm9 also try aokp
Click to expand...
Click to collapse
Same issue was there when i flashed Roms using KS (tried CNA,CM9) and tried MUI Rom also still not use. But i was able to use it on stock RoM
If you are getting the force close upon the phone starting resulting in no service, this is normal with the ICS based roms. The last rebase joker did was on version 3.1. Installing anything after that only once will cause this issue. You can do one of three things to remedy this...
1: Use the Kitchen Sink Rom
2: Flash .3.1 first, then the latest version.
3: Flash the latest version, then immediately flash it again. Then install your gapps.
Also, make sure you have Jokers CWM.
Same issue
I was having the same issue, except right when my phone booted up it kept giving me the message that android.process.phone has stopped working, and it wouldn't let me connect to the mobile data network either.
Acvice said:
If you are getting the force close upon the phone starting resulting in no service, this is normal with the ICS based roms. The last rebase joker did was on version 3.1. Installing anything after that only once will cause this issue. You can do one of three things to remedy this...
1: Use the Kitchen Sink Rom
2: Flash .3.1 first, then the latest version.
3: Flash the latest version, then immediately flash it again. Then install your gapps.
Click to expand...
Click to collapse
Not able to find .3.1 can you pl direct me to the download site.
Akhileshjj said:
Not able to find .3.1 can you pl direct me to the download site.
Click to expand...
Click to collapse
It's in the CM9/MIUI fixes thread in the development section, one of the stickies by th3bill
Sent from the back of a MoPhoKing AOKP Unicorn
bullfrog527 said:
It's in the CM9/MIUI fixes thread in the development section, one of the stickies by th3bill
Sent from the back of a MoPhoKing AOKP Unicorn
Click to expand...
Click to collapse
thanks got it.
I just spent the last 6 hours figuring this out and go figure it would be in the Q&A section... Did a fresh stock flash, factory wipe, format cache, dalvik and system. Installed .3.1. Then ONLY wiped the dalvik cache and upgraded to the 6.1 i would stop getting the com.android.phone FC. If i did the factory wipe it would start FCing again.
cdma
akhilesh can you tell me how did you make the cdma work intially on your photon i tried all the methods told by farookhjii and it didnt work
sibin.mohan said:
akhilesh can you tell me how did you make the cdma work intially on your photon i tried all the methods told by farookhjii and it didnt work
Click to expand...
Click to collapse
are you asking about CDMA in india ?
I updated cynaogen to a experimental version, had problems went back to nightly. Then my play store was missing. I attempted to flash gapps and when rebooting the phone. It loads a screen with the droid logo, reading welcome to SCH-1535. Touch the android to begin and when I do it gives me an error unfortunately set wizard has stopped.
I tried to wipe data and reboot. Does not work.
Please please help
you flashed the wrong gapps
Glebun said:
you flashed the wrong gapps
Click to expand...
Click to collapse
WHich gapps do i need?????????
the ones for the android version you're flashing.
One question mark is enough
Glebun said:
the ones for the android version you're flashing.
One question mark is enough
Click to expand...
Click to collapse
Sorry! So i use gapps for Samsung Galaxy s #, or jelly bean (that is what was on the phone before I messed it up) or gapps for cyanogen 10? The phone attempts to load cyanogen then goes to the setup screen.
Would it be an option to flash back to original ROM?
I don't understand the question. CM is jellybean
Glebun said:
I don't understand the question. CM is jellybean
Click to expand...
Click to collapse
Does that mean I have to flash gapps for cyanogen 10?
If you flashed CM10, it's obvious that you need gapps for CM10
Glebun said:
If you flashed CM10, it's obvious that you need gapps for CM10
Click to expand...
Click to collapse
Actually I didn't flash anything. That's how I bought the phone. I don't know anything about flashing, but I really appreciate your help.
what's your point?
if you have CM10, it's obvious that you need gapps for CM10
Hey Folks,
Hoping someone has come across this before -
Rooted Droid Razr running cm-10.1-20130309-NIGHTLY-spyder, flashed fine and boots successfully.
However, if I then flash JB-4.2-Gapps-signed - marketed for 'All Devices', I get the msg "com.google.process.gapps has stopped" and then "Setup Wizard has stopped" as soon as the phone boots into CM.
To get back to running cm-10.1-20130309-NIGHTLY-spyder I have to re-flash stock OTA, re-root and re-flash CM10.1.
Does anyone know a Gapps package that will install on this build?
Cheers, Arkoze
Solution
arkoze said:
Does anyone know a Gapps package that will install on this build?
Click to expand...
Click to collapse
fixed.
gapps downloaded from here 10.1 is the top one http://goo.im/gapps
Help
I tried installing the same 4.2.2 but never got out of bootstrap. Can you please help. See me previous post.
I know its probably annoying to help out someone that doesn't know what they are doing, but im begging!
I'm running paranoid android v3.15 and the soap kernel I really like this ROM and the kernel is awesome I m missing the multi window feature so I downloaded multiwindow UVALK8 zip deodexed from goo manager then I flashed it using twrp rebooted and I was stuck on boot so I had to take out my battery and put it back in and wiped data then coach then dalvik and flashed back to paranoid android needless to say that wasn't the right zip file. Can anyone help me out which one do I need and which ROM does it work with. Also having trouble flashing pacman ROM it won't flash
Verizon i605 Base vrall4.
Thanks for the suggestions.
Mike
webb7735 said:
I'm running paranoid android v3.15 and the soap kernel I really like this ROM and the kernel is awesome I m missing the multi window feature so I downloaded multiwindow UVALK8 zip deodexed from goo manager then I flashed it using twrp rebooted and I was stuck on boot so I had to take out my battery and put it back in and wiped data then coach then dalvik and flashed back to paranoid android needless to say that wasn't the right zip file. Can anyone help me out which one do I need and which ROM does it work with. Also having trouble flashing pacman ROM it won't flash
Verizon i605 Base vrall4.
Thanks for the suggestions.
Mike
Click to expand...
Click to collapse
Multiwindow like the stock rom has?
Yeah like stock
webb7735 said:
Yeah like stock
Click to expand...
Click to collapse
Oh that doesn't work on AOSP roms.
OK. Can't figure out why I'm having trouble flashing the pacman ROM. I'm downloading blade_PAC_job_4.2.2_v22.1.0 hopefully I will have luck with this one. I'm still learning as I go. Thanks for your help man.
webb7735 said:
OK. Can't figure out why I'm having trouble flashing the pacman ROM. I'm downloading blade_PAC_job_4.2.2_v22.1.0 hopefully I will have luck with this one. I'm still learning as I go. Thanks for your help man.
Click to expand...
Click to collapse
Blade is a different phone. It should say i605 somewhere.
Dude, seriously. Take the time to read the entire forum in order to do things correctly instead of flashing everything you see. Go to the threads and ask the right questions. I can see you posting in a few days complaining about how you bricked your phone.
webb7735 said:
I'm running paranoid android v3.15 and the soap kernel I really like this ROM and the kernel is awesome I m missing the multi window feature so I downloaded multiwindow UVALK8 zip deodexed from goo manager then I flashed it using twrp rebooted and I was stuck on boot so I had to take out my battery and put it back in and wiped data then coach then dalvik and flashed back to paranoid android needless to say that wasn't the right zip file. Can anyone help me out which one do I need and which ROM does it work with. Also having trouble flashing pacman ROM it won't flash
Verizon i605 Base vrall4.
Thanks for the suggestions.
Mike
Click to expand...
Click to collapse
Not to mention original android development is not where to ask questions and start topics... unless you are a developer.
Sent from my SCH-I605 using XDA Premium HD app
Yeah
oo3 said:
Dude, seriously. Take the time to read the entire forum in order to do things correctly instead of flashing everything you see. Go to the threads and ask the right questions. I can see you posting in a few days complaining about how you bricked your phone.[/QUOTE
True I will take time to post and ask in the right place. Sorry about that devs. I work 15 hrs a day 7 days aweek at a car plant so im never home dont have time to acutually set down and research the right way seems like im always doing it while im working.
Click to expand...
Click to collapse
Good afternoon
I am on verizon and I just flashed back to KK from LP I am on 12B. I just Rooted with the LG one click root. I also downloaded Flashify.
I want to get TWRP for the G3, Where do I go to Get TWRP for verizon? There is the TWRP Manager app I downloaded but Uninstalled because it wanted fix a partition so it can write to the SD card. I said no then uninstalled it.
Should I redownload the App and let it fix or do something different? It has been awhile since I rooted and ROM'd want to get back into it.
the last time I rooted and Rom'd was in 2009 when I had my thunderbolt
thanks again for the information
Chris
You are fine with letting it do the fix. Be sure to get the vs985 version of twrp
Sent from my VS985 4G
MORANDCHI said:
Good afternoon
I am on verizon and I just flashed back to KK from LP I am on 12B. I just Rooted with the LG one click root. I also downloaded Flashify.
I want to get TWRP for the G3, Where do I go to Get TWRP for verizon? There is the TWRP Manager app I downloaded but Uninstalled because it wanted fix a partition so it can write to the SD card. I said no then uninstalled it.
Should I redownload the App and let it fix or do something different? It has been awhile since I rooted and ROM'd want to get back into it.
the last time I rooted and Rom'd was in 2009 when I had my thunderbolt
thanks again for the information
Chris
Click to expand...
Click to collapse
If you don't trust the app, you can do it yourself using http://forum.xda-developers.com/showthread.php?t=2317790
Download the latest TWRP here:
https://dl.twrp.me/vs985/
sirkevinus said:
If you don't trust the app, you can do it yourself using http://forum.xda-developers.com/showthread.php?t=2317790
Download the latest TWRP here:
https://dl.twrp.me/vs985/
Click to expand...
Click to collapse
thanks for the Information, did it last night and everything is good. Made a Nadroid backup.. Now the hard part is trying to figure out what ROM to flash to
Was looking at skydragon or Resurrection.. Choices Choices Choices
thanks again
Chris
Latest TWRP is here (v2.8.6.1). Just flash the file in recovery.
Try both ROMs and a couple others, too! I suggest starting with a stock-based ROM, getting a feel for the difference (smaller delta), then moving to an AOSP/CM-based ROM.
epidenimus said:
Latest TWRP is here (v2.8.6.1). Just flash the file in recovery.
Try both ROMs and a couple others, too! I suggest starting with a stock-based ROM, getting a feel for the difference (smaller delta), then moving to an AOSP/CM-based ROM.[/QUOTE
I just installed Liquidsmooth ROM for the LG G3 on VZW. I flashed it and now it keeps poping up google play services has stopped. How do I get it to work so I can sign in and download my google stuff?
thanks alot
Chris
Click to expand...
Click to collapse
MORANDCHI said:
epidenimus said:
Latest TWRP is here (v2.8.6.1). Just flash the file in recovery.
Try both ROMs and a couple others, too! I suggest starting with a stock-based ROM, getting a feel for the difference (smaller delta), then moving to an AOSP/CM-based ROM.[/QUOTE
I just installed Liquidsmooth ROM for the LG G3 on VZW. I flashed it and now it keeps poping up google play services has stopped. How do I get it to work so I can sign in and download my google stuff?
thanks alot
Chris
Click to expand...
Click to collapse
Did you flash the gapps with the rom.? I'm guessing that is a lollipop rom so you need the lollipop gapps to go with. There should be a link for the gapps in the same thread as you got the rom.
Sent from my VS985 4G using XDA Free mobile app
Click to expand...
Click to collapse
Make sure that you wiped properly (including System and Data partitions, as well as the caches) in TWRP.
After that, make sure that you installed the Gapps and the correct version of them for the ROM. I like these packages.
Thank you all for the info, I wiped and flashed the rom with the right gapps.
Chris