[Q] Have I bricked my Optimus L5? - Android Q&A, Help & Troubleshooting

Hello,
I Was trying to install cyanogenmod on my LG Optimusl5 and I was quite succesfull. I saw the screen working like a charm and the phone seems to be running ok. But, after something about 1 minute, the phone boots. This happens all the time when the system starts.
Another information is that this started after I unblocked the phone and BEFORE I installed the cyanogenmod (in other words, this boot occurs even in official room).
So, I tried to recover my bootloader typing really fast the command described in this post (http://forum.xda-developers.com/showpost.php?p=38053729&postcount=1159): dd if=/sdcard/bootloader_backup.bin of=/dev/block/mmcblk0p5. But I made this after installed cyanogenmod.
When it restarted, the smartphone shows the following message:
"
Secure booting error!
Cause: boot certification verify
"
I tried some recovery options like volume down, power and (after) home button, volume up, power and home button, volume up and down, power and home button. Everyone of this actions redirected me for this screen.
I tried to use KDZ but it does not found my phone.
The question is: have I bricked my phoje? Can I recover it? Without jtag?
Thanks in advance.

Anyone?
I saw that my windows loaded a adb driver when I plug my e612 into usb: fastboot interface (Google USB ID).
But I`ve tried to use the lg recovery tool and adb and neither of them found the device.
Does anyone have any (any!!) ideia??

Well, I can acess fastboot, but don`t know what to do.
How do I flash the original room on my e612?
Thanks

Related

[Q] Atrix bootloop problem

Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
RaiderDuck said:
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
Click to expand...
Click to collapse
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
ergotelis said:
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
Click to expand...
Click to collapse
flasing a recovery is done via fastboot so you don't have to enter recovery but fastboot (hold power and volume down till it shows fastboot, then press up) .
look at this post: http://forum.xda-developers.com/showpost.php?p=33137046&postcount=10
Fix
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
hello i had this problem yesterday, it happens in neutrino rom to alot of people!
and btw i could not open recovery either
ill explain what i had to do
i had to use moto-fastboot and install a new recovery, basically your recovery is dead and your rom is unbootable
heres the steps
download the moto drivers and install
http://forum.xda-developers.com/attachment.php?attachmentid=1381183&d=1349549067
then download the motofastboot zip http://forum.xda-developers.com/attachment.php?attachmentid=1381414&d=1349555102
and create a new folder in C: (computer) called Android and then drag the files from the moto zip into android
Then download a new recovery http://www.mediafire.com/?6ww8wrjrdqq9m97
place the recovery.img into the android folder
now you have all the files needed to reflash your new recovery and fix your phone the whole idea is to reinstall recovery so you can access it and wipe and install the rom fresh again
now you need to do these steps
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
4) On your PC click the Start menu, then in the search box type "cmd"
5) In the command prompt type the following commands (no quotes, hit enter after each command)
6a) "cd c:/android"
6b) "moto-fastboot devices"
your CMD promt should show something like this
C:\Users\Me>cd c:/android
c:\Android>fastboot devices
TA20703SX9 fastboot
c:\Android>
now if that has all worked type the following phrases
moto-fastboot erase recovery
moto-fastboot flash recovery recovery-clockwork-6.0.1.4-maguro.img
moto-fastboot reboot
now the phone should reboot, unplug the usb and pull battery out.
put battery back in and then try to boot into recovery like you normally would (power button + Vol Down)
and your new recovery should load!
from here you can wipe your whole system which i would reccomended as your current one is corrupt and install a new rom or reflash your current on onto a clean wipe. if you dont understand how to clean wipe do all of these steps, factory reset, clear cache, clean dalvik cache then go to mounts > storage and format data + format cache + format system
now install new rom and let it boot up, should bootloop a couple of times then start! if not unplug battery from phone and ask for further assitance
Pixelguy said:
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
Click to expand...
Click to collapse
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
ergotelis said:
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
Click to expand...
Click to collapse
unplug usb
remove battery, then put battery back in make sure phone off (no green light)
then hold power button and vol down at the same time for a few seconds
Fastboot should appear in white writing then press up volume and it should say starting rsd protocal or something similiar
then plug in usb and follow the steps i have written above
i do exactly what you said, but doesn't show fastboot. from switched off, if i press volume up with power button, i see the message "starting rsd protocol support" .but no fastboot option!
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
jorno88 said:
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
Click to expand...
Click to collapse
When i start up phone, the only combination possible to stop restarting is by pressing power+vol up to show that with RSD. There is no other option then selectable. Power + volume down does not work, doesn't show anything, has anyone of you experienced this thing?
If the only working option you have is RSD, then I'm afraid you're stuck with having to flash a stock SBF. I hope you know/remember exactly what stock version you had installed before any modding or flashing, because the SBF has to match exactly. Choose wisely and read up as much as you can before flashing.
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
I will later also try to open it, to see if the side button "volume down" is not working,.
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
ergotelis said:
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
Click to expand...
Click to collapse
Yes, flashing a wrong SBF will most likely hardbrick your device.
ergotelis said:
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
Click to expand...
Click to collapse
Can't try right now, but as far as I know, yes, that is a standard way to enter RSD mode.
thank you, so, i know that at least my phone responds to some instructions.
Is there anyone else to suggest me to do anything else?
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
ergotelis said:
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
Click to expand...
Click to collapse
Sadly no. The RSD mode can only ever be used to flash SBFs. That's it. Nothing less, nothing more.
I will now try to open it to see if vol down is not working well. If it does work, i will select a stock rom 1 year old and i will flash it using rsd, and whatever happens....:good:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
try this
ergotelis said:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
Click to expand...
Click to collapse
Yesterday I had a hard time getting my phone into fastboot mode, after loading a bad SV kernel,it only wanted to start the RSD protocol mode. I eventually got into fastboot by plugging into the wall charger, then removing and installing the battery while holding the vol button. When fastboot appears, unplug the charger to allow sd access.
Thanks for the suggestion, i tried even this,it didn't work. The funny thing is that it shows the battery charging level full screen if i connect the charger, as it starts.
I noticed also that when i press vol down now, it takes longer to start and continue to the moving red logo, it stays for a while stable red,feels like it is thinking whether to start or not lol (if i don't press vol down, on the power up the red moto logo immediately starts the classic "waving" effects)
Anyone having any kind of suggestion?I guess you don't, right?

[Q] Bootloader Encrypting Error | L9 P760

Yesterday I rooted my LG Optimus L9 using LGpwn tool, after that it worked just fine.
This morning I tried to install ClockworkMod Recovery. Using this post. It explains how to download and install CWM Recovery from app that you downloaded in form of APK.
This method did not work 100%, but I was able to reboot normally, so in post it said that sometimes it does not work and you need to download and use Busybox installer Link to busyboxx.
After this I managed to boot in too CWM using app from mentioned thread.
Then problem occurred. After I saw CWM was working I selected reboot device option.
Except now when it started to boot it stops right after Second LG logo (First is static one second one is animated).
I get white screen with "Encrypting" on top and gray line. And one Reset Phone button. IMG they are Dropbox links.
This is followed with Error : Unfortunately, the process com.android.phone has stopped. IMG
I am able to boot in too CWM and I have tried flashing something like Cyanogenmod but I get error Status 7. Tried removing line that checks model, no use.
Tried clearing every cache and fixing permissions, nothing. Formatted everything still no use.
Dear XDA community That you in advance.
I fixed my phone by going into SW upgrade mode, and using the Upgrade Recovery function of the LG Software Update tool or whatever. Be sure you don't have any http servers open
Sent from my LG-P769 using XDA Premium 4 mobile app
I got the same problem, but when I try to access to SW mode and connect to LG Software Update tool to restore my phone, the phone keep disconnect and the phone screen will turn off, so I fail to restore my phone, I have already re-install the USB driver and changed a several USB cable but the problem still, but I tried to restore my phone with SW upgrade method since last night and is was OK, can anyone help me?
---------------------------------------------------------------------------
The Problem Solve Finally, the solution is I plug the battery back to the phone after access to LGMobile Support Tool, and after finish the restore process, the phone will restart but keep boot loop, then I perform the hard reset (Remove the Battery and insert it after few seconds. And now do the 3 button HARD RESET. First press VOLUMEDOWN and HOMEbutton. Then Press Power button only for 3 seconds and release power button but dont release VolDown and Home button and KEEP BOTH PRESSING until you see a Bigger Green Standing Android and circulating Molecular structure above it. DONE! ), then the phone begin work~~~
pigmich said:
I got the same problem, but when I try to access to SW mode and connect to LG Software Update tool to restore my phone, the phone keep disconnect and the phone screen will turn off, so I fail to restore my phone, I have already re-install the USB driver and changed a several USB cable but the problem still, but I tried to restore my phone with SW upgrade method since last night and is was OK, can anyone help me?
---------------------------------------------------------------------------
The Problem Solve Finally, the solution is I plug the battery back to the phone after access to LGMobile Support Tool, and after finish the restore process, the phone will restart but keep boot loop, then I perform the hard reset (Remove the Battery and insert it after few seconds. And now do the 3 button HARD RESET. First press VOLUMEDOWN and HOMEbutton. Then Press Power button only for 3 seconds and release power button but dont release VolDown and Home button and KEEP BOTH PRESSING until you see a Bigger Green Standing Android and circulating Molecular structure above it. DONE! ), then the phone begin work~~~
Click to expand...
Click to collapse
I had this problem too...
You can also try, start upgrade tool, Remove battery -> press volume up + insert usb with upgrade tool open, it will detect, insert battery then go to extras and click upgrade-foutherstel (is in dutch for me)
Then it will all work, I can't even install a custom rom My bootloader is unlocked, rooted phone, installed recovery, see my thread about the error I get!! please!
help lg p768 encrypting error problem
can someone help me please.
i have the same problem from the starter of this thread..
installed recovery apk and goes to encrypting error.
i dont know what to do and how to begin to solve my phone problem.
thanks

[Q] UMI X3 boot loop...

Hello! I don't know where i should post this since the UMI X3 device isn't on this site, so i just post it here...
I installed a custom rom, now it's bootlooping.
If i turn it on it will show the little boot splash screen, then the screen will go black and usually it would show the boot loading screen but it doesn't, it reboots again to the boot splash screen.
I tried searching on google, but none of the forum posts actually helped me.
I try to holds down the power button and the volume up button at the same time, but it will just do the same bootloop thing.
The home button is a touch button, and i actually already tried holding down on that but it didn't work.
I also tried holding power button and volume down, and i tried holding all the buttons down at once (power + volume up and down)... also no succes.
Now it used to work, i got into some chinese bootloader before i installed this rom.
So, basicly it won't get into any recovery. I did install clockworkmod recovery actually and it did work, yet i needed to launch it via mobile uncle tools to get into it. I think im totally ****ed now...
Pleace, is there ANY way to solve this problem?
Problem in a nutshell:
Boot looping splash screen, can't get into recovery mode. (PS: i also tried to connect it via USB but it won't find my phone...)
- Kyran
UPDATE:
I'm now able to get into recovery mode!
However i can't mount usb.
Same problem
Kyranio said:
I'm now able to get into recovery mode!
However i can't mount usb.
Click to expand...
Click to collapse
Hi Kyriano,
I have the same problem after installing the cynogenmod, does your phone work now. How did you get in the recovery mode??
posible solution
Hi,
After struggling with this issue all day i found a quite simple solution.
The cause of the bootloop in my case was the simcard. So this is what i did:
1. remove simcard tray
2. Turn the phone off and on
3. If everything is ok the bootloop stopped, if not try to reboot again
4. Download mobileuncle in the playstore
5. Open the app click on; into recovery mode
6. Recovery will open and then hopefully you made a backup.Restore it and voila!
If you did not make a back try to flash the official umi ROM.
I hope this solved your problem to.
Greets ryan

Bootloop and no way to enter in recovery or download mode

Hi guys! Yesterday I decided to unlock the bootloader, flash recovery (twrp 2.8.6) and the cyanogen 11 nightly. Everything went good until I tried to install the gapps, I noticed that the physical shortcut to enter in recovery (after the turning off, of course) didn't worked: the phone restarted or boot up the rom, but I was able to enter in recovery from the advanced restart menu from the rom. Going into the info of the phone where it says kernel there was written "unknown" and no way to overclock. So I decided to reinstall the kernel (the cyanogen11extended) from twrp, everything went good except that I couldn't restart into recovery, it stuck on rebooting until shutdown. So I tought let's use fastboot to erase ad flash the recovery partition and the kernel, but it didn't do anything even if on the cmd said okey and finished in something about a second, but when i tried to enter in recovery I always get stucked on rebooting. So I tought"well if I have the system image I could flash it with fastboot and restore the stock kernel", so I erased the system partition and tried to flash the system.img and I get the message that it is too big for the destination device. Now I don't have a system installed tye hotkeys don't work and I'm stuck on LG screen logo.
There is a solution or do you suggest to send the device in warranty, instead?
Pull the battery and try to enter download mode.
Hi vagelis! You mean without the battery? The hotkey is vol up+power, right?
Edit: i tried without the battery pressing the vol up + power (also tried with vol down + power) and it doesn't work, on the screen I have an image which says to put the battery in, and holding the keys has as only result to reboot the phone showing the image... I guess there's no hope right?
Edit2: I entered download mode using the g2 method, now I have to downoad the kdz rom and the lg flash tool to unbrick, right? But where I can download it since the lg site for the firmware is apparently down?
JasperHTC-Touch said:
Hi vagelis! You mean without the battery? The hotkey is vol up+power, right?
Edit: i tried without the battery pressing the vol up + power (also tried with vol down + power) and it doesn't work, on the screen I have an image which says to put the battery in, and holding the keys has as only result to reboot the phone showing the image... I guess there's no hope right?
Edit2: I entered download mode using the g2 method, now I have to downoad the kdz rom and the lg flash tool to unbrick, right? But where I can download it since the lg site for the firmware is apparently down?
Click to expand...
Click to collapse
http://lg-phone-firmware.com/mobile/index.php?id_mod=57
Ok guys, I was able to unbrick entering in emergency mode e doing the flash tool stuff. The strange thing is that when I start the flash tool putting the file kdz and going forward in the next window, when I click on read phone info the program stops working, if I click directly on stuff then the lg mobile support tool is opened. Now when it starts to write on the phone, the tool says that an error occurred (something like "the server is offline) but on the phone it says the port com and start to download the rom. If I say ok to the error of the lg mobile support tool it stops the firmware update and stops the program, if I don't click ok the firmware update end is work unbricking the phone.
Now I noticed that with the stock rom from the version v10h until the last one towelroot is not working, so I downloaded the v10g germany version (since the italy version was offline) and flashed with the same procedure as I have done with the unbrick, so I could run towelroot and flash the twrp and the cyanogenmod11. Thank you so much for your time!!
The topic is quite old, but I've just solved that problem. You should just do it:
1) hold power and vol down till you see LG logo -- immediately release these buttons and 
2) immediately hold power and vol up button to enter into factory reset menu. 
Then click "yes" and next "yes", too.
That's all.

Can't boot into recovery- bootloop and broken Volume UP.

Hello. Today i wanted to change my OS on my S3. So i have done it, i wanted to do some upgrades like viper4android. I have broken volume up, so the only way to get into recovery is in android only. So, I installed it, and i have bootloop. I cant boot to fastboot (volume up needed), and ofcourse recovery. I can see only bootloop... I just have to boot into recovery. How to do that? Help, please. Thanks.
Does adb recognize your device? If so
adb reboot recovery
If you don't have adb then go get them via Google
snkmv said:
Does adb recognize your device? If so
adb reboot recovery
If you don't have adb then go get them via Google
Click to expand...
Click to collapse
Well, i tried, but my phone isn't recognized on my pc. I just plug it into pc, and nothing. Tried on netbook, nothing . Dunno why. Its normal?
You have drivers installed?
I know this is an old thread, but I figured it'd be better to hijack it than create a new one.
A while back my phone started randomly freezing and rebooting, last week it just got into a bootloop instead, my volume up key isn't working, so I can't go into recovery-mode nor download-mode (since one has to press volume up to continue), I've tried to use adb, using a script to wait for a connection, then instantly freezing it so it can either send over a file or just boot into recovery, but it seems it doesn't boot up enough for a connection to start. I also tried removing my volume key and manually pressing the volume up key with both a toothpick and a screw-driver (just in case contact with metal would change the outcome), but didn't work. Has anyone found a solution?, Is there a way to boot into either recovery- or download-mode without the need to have the phone turned on first or using the volume up key?

Categories

Resources