how to patch Energy Android Smart TV Box - Android Q&A, Help & Troubleshooting

I have a "Energy Android Smart TV Box" (ICS 4.0.3, ARM Cortex A9, 512MB RAM, WiFi, DVB-T, 3xUSB ...)
energysistem.com/en/products/android_tv
The only way to connect to the Internet is through a VPN connection (PPTP), but it bothers me a bug in Android.
The error I'm getting in the log is as follows:
Creating PPPoX socket
Socket () Protocol not supported.
I found a patch for it, and the manufacturer provides kernel available for download.
Patch is here: code.google.com/p/android-x86/issues/detail?id=451
I tried to manually apply patch. I replaced some code in files if_pppolac.hi if_pppopns.h. But I do not know how compile kernel
I tried a few tutorials but failed. Please if someone has the time to compile or some advice on how could I do it.
The kernel source is here: energysistem.com/en/support?F=lgibeblbchbg&A=kdmiagjkkkeb&S
a kernel on which I tryed to correct code is here: dropbox.com/s/tzdk8472q8jeky3/kernel.zip
I also tried to install latest fw update, several alternative ROMs and several VPN clients but nothing worked.
always the same error: Socket () Protocol not supported.
The best would be if I could put Jelly bean on box. In Jelly Bean pptp works fine. Is it perhaps possible?
thanks in advance

please

vlovrec said:
please
Click to expand...
Click to collapse
bump

vlovrec said:
bump
Click to expand...
Click to collapse

Hey. Where do you got the custom firmware for that box?

Related

[Q] Bluetooth HDP Profile Android 4.0

Im testing HDP profile for android 4.0. I think that it doesnt works correctly because Im trying with Nonin 9560BT and it connects but it doesnt sends medical data to android.
The trouble is the next:
First, I init bluetoothAdapter and I getProfileProxy. After, device connects to android. I catch ACL_CONNECTED with broadcastReceiver. I ask for bluetoothHealth.getMainFD to open communication but it says Proxy not attached to service. Finally, device disconnected.
Somebody can help me?
Thanks.
Hi There:
I also have a problem about HDP.
I try to connect to HDP device, but just only can pair with the device.
I can't connect to it, I think that my adapter doesn't know the HDP service.
Do you know why I have this problem?
Hi admirty,
There's a problem with L2CAP opening channel. If you get FD you can see that value is 0. BlueZ developers fix this bug in new version 4.97. This will be fixed for Android when Android Engineers add this version to Android 4.0.
anyone have any idea if Bluez 4.97 is going to be implemented in Android 4.0 any time soon? or is it possible for one of the Devs on XDA to write a module for it?
Been waiting for some of these features since Android 1.6!!
Kiwi

[Q] Arduino Mega ADK and JellyBean

Hey folks, I've been trying to get the Arduino Mega ADK to work with two of my devices and so far I'm been totally unsuccessful. Both my Nexus S and Nexus 7 seem to do nothing with connected to the Mega ADK.
So, here are the details and hopefully someone can help out.
First off, I'm experienced with Arduinos and µCs. I'm 100% sure that I've correctly compiled and flashed the demo sketch onto the ADK. In the serial monitor I can see that the ADK will boot and attempt to get the Android device to do something and fails (it tries this continually unless a device successfully enters accessory mode and responds).
Both these devices are supposed to have support for the ADK and I've checked the devices and both have the correct .xml and .jar files for doing so. However, I'm currently running CM10 on both devices and I'm wondering if perhaps the kernel doesn't have the accessory mode enabled or if there's another stumbling block inherent to CM10.
Doing some google research I see that certain updates (4.0.3) have broken ADK support in the past, so perhaps it's just a Jellybean issue? Is there a way of checking kernel options or flashing a kernel known to work? I'd like to narrow down some of the possible issues here.
Hey mate!
I had the same issue, I fixed by using the library version 2 from labs.arduino.cc/ADK. You can download it directly from here: labs.arduino.cc/uploads/ADK/GettingStarted/ArduinoADK-beta-001.zip.
From what I've read the problem is that Android 4.1 uses adk version 2 and has some incompatibilities with the previous version.
Best,
Alex
PD) Sorry for not hotlinking can't do it yet with this account
I've been using that version and still get no response from the Android device. I suppose I'll have to flash stock 4.1 and see if that works, Sadly there's very little proper documentation on this and not a lot of people seem interested in accessory mode devices.
Arduino Mega ADK Nexus 7 Tablet
SirLalala said:
Hey mate!
I had the same issue, I fixed by using the library version 2 from labs.arduino.cc/ADK. You can download it directly from here: labs.arduino.cc/uploads/ADK/GettingStarted/ArduinoADK-beta-001.zip.
From what I've read the problem is that Android 4.1 uses adk version 2 and has some incompatibilities with the previous version.
Best,
Alex
PD) Sorry for not hotlinking can't do it yet with this account
Click to expand...
Click to collapse
Hi mate,
I hope that you are able to see this message. I have the similar issue. I tried using this version 2 of this library and when i compile the example code "demokil_20", i get the error " 'USB' does not name a type".
Please help me out here.
Best Regards,
Arslan
[email protected] said:
Hi mate,
I hope that you are able to see this message. I have the similar issue. I tried using this version 2 of this library and when i compile the example code "demokil_20", i get the error " 'USB' does not name a type".
Please help me out here.
Best Regards,
Arslan
Click to expand...
Click to collapse
I got the same USB error. I haven't figured out the problem yet, but I was able to get another example from the version 2 adk library working with jelly bean. I think it was called termtime or something like that. It recognizes the phone the and will pop up saying theres an arduino accessory attached and there is no application to open for that accessory. You can change the example code to "Google" and "Demokit" to auto launch the Demokit.apk app.
I just got this arduino adk two days ago and only have one Android device, a Samsung Captivate with slimbean rom, to test it on.

RK292x + RT3188 based miracast HDMI stick firmware

I just bought this HDMI DLNA / Miracast receiver stick. The model seems to be a "Ugoos UG017" aka "Chromecast MD321" aka "MOCREO iPush M1" aka "HI762 HI763 (Chromecast)" aka "CX-V3" aka "PTV-2R" and possible more names. The hardware is:
- Rockchip RK2928-G @~1GHz
- 256MB DDR3
- 16 MB NAND
- RT3188 WLAN-Chip
- Push-switch to toggle DLNA / Miracast mode
There seems to be a UART available on some test points on the PCB. Any ideas on how to connect to that (settings)?
DLNA through BubbleUPnP is more or less working (skipping seems to lock the stick, playing playlists too), but Miracast is not, at least not on my Xperia L with CyanogenMod 11 / FXP 333.I tried the firmware for the "Pipo X5" and "MOCREO iPush M1" (both ~14MB) and both worked. Both state version "3.0.0-rc2". I would be thrilled if someone could link to a newer (and hopefully more bug-free) version than that...
EDIT: If found a link to a much better firmware (v5.0.0-rc2) for the CX-V3 here. DLNA is much better. Miracast still does not work, but I suppose that's just FXP 333...
if someone is interested this firmware allowed me to miracast with a samsung galaxy tab s
tried other firmwares (CR-M200,ugoos-ug017,CX-V3) but only this was updated
http://www.cloudnetgo.com/CR-M200S.htm
Regards
galaxy tab s
Hi Lucize,
I tried the firmware you posted, but the problem remains: "Impossible to initiate screen mirroring due to a HW problem"
What Android version do you have on your TAB S? Is it a 8.4 or 10.5 version?
Thanks in advance!
CR-M200 firmware on WiFi Display Dongle M806 on SM-G900V
lucize said:
if someone is interested this firmware allowed me to miracast with a samsung galaxy tab s
tried other firmwares (CR-M200,ugoos-ug017,CX-V3) but only this was updated
Regards
Click to expand...
Click to collapse
Thank you so much, lucize! It worked! I was able to miracast with my Galaxy S5 using the built in screen mirroring function. My android version is 4.4.4.
I got a Tronsmart CX-V3 dongle and I was wondering how to update it, since Tronsmart has -of course- no updates. So tried to find some more clones who could have an update and maybe even the manufacturer.
The latest I managed to find is version 9.0.0, dated 21-4-2015, by Ergotech. Their MD3054 and MD3056 seem to be the same according to the doc file in MD3054's update (8.0.0 rc1) (*1), so I downloaded MD3056's (*2) and flashed it. Sunchip-Tech strongly advices to update the software(*3), so i didn't have any hesitations.
A PDF included in 3056's update as well in the *3 link, indicates that there is OTA update option via the manufacturer (Sunchip-Tech). This means that maybe all Miracast sticks of this manufacturer can be updated directly by Sunchip-Tech. Keep in mind that the menu language will be switched to Chinese after the update, but it can be very easily switched back to English in the settings menu.
Ergotech's download page can be found in link *4.
While searching, I noticed than some RK2928 based Miracast dongles were called Lollipop (not because of Android). I searched a bit more and found Rockchip's user guide for RK2928 wireless HDMI dongles(*5), which calls RK2928 dongles as Lollipop. Seems that the reference Rockchip design is followed by the manufacturers. In that user guide I noticed the settings screen is same as my dongle's, but the main screen picture is different though same to some other RK2928/Lollipop dongles I had seen while searching. So probably there is an other manufacturer who kept the original main screen and maybe has even newer software. I did some more searching and the latest I could find is CloudNet's 3.21.00 (dated 28-5-2015) for CR-M200S. This one has OTA settings too, unveiling its manufacturer is Hotack. I believe it is a newer version than Ergotech's/Sunchip-Tech's version 9.0.0 because it has boot version 1.41 instead of 1.40.
CR-M200S download page is at link *6 and in lucize's post too.
Relatively new firmwares are also available by these companies:
Emtec (emtec-international.com/en-eu/Firmware-F100)
Ugoos (ugoos.net/A3S)
*1 drive.google.com/file/d/0B3bETZxL2iACYXdvV2VIdVh4dUU/view
*2 drive.google.com/file/d/0B3bETZxL2iACRXRZWndNRDRwZmM/view
*3 ergotech.com.tw/tw/newsdetail.aspx?id=106
*4 ergotech.com.tw/tw/Download_detail.aspx?key=
*5 upload.sunsky-online.com/res/drivers/S-EAT-0179.pdf
*6 cloudnetgo.com/CR-M200S.htm
talos_2002 said:
I did some more searching and the latest I could find is CloudNet's 3.21.00 (dated 28-5-2015) for CR-M200S. This one has OTA settings too, unveiling its manufacturer is Hotack. I believe it is a newer version than Ergotech's/Sunchip-Tech's version 9.0.0 because it has boot version 1.41 instead of 1.40.
CR-M200S download page is at link *6 and in lucize's post too.
*6 cloudnetgo.com/CR-M200S.htm
Click to expand...
Click to collapse
I can approve that the CR-M200S firmware you linked works quite well. Have you tried the OTA update too?
Latest firmware (MD3056PW 3/sept/15) is from ergotech. Version 10. However there is no dlna subtitle support yet. I am waiting for this firmware to appear soon. None of the firmwares support subtitles over dlna. There is a metadata code that can be used on the firmware to support subs. My nas network disk (twonky server) supports metadata as most do. I am using version 10 without any problems. The only other problem I have is my tablets resolution which is not supported, 1280x 800, which gives me black borders on the sides on the casting TV (when on landscape). I have tried all firmwares with the same result.
There is a metadata code in ezcast forum that they have used to display subtitles over dlna which I am not allowed to post.
Also I have managed to use kodi/xbmc to display videos over dlna but no subs support again. There is a YouTube video and files you need in order to accomplish this.
cypriot said:
Latest firmware (MD3056PW 3/sept/15) is from ergotech. Version 10. However there is no dlna subtitle support yet. I am waiting for this firmware to appear soon. None of the firmwares support subtitles over dlna. There is a metadata code that can be used on the firmware to support subs. My nas network disk (twonky server) supports metadata as most do. I am using version 10 without any problems. The only other problem I have is my tablets resolution which is not supported, 1280x 800, which gives me black borders on the sides on the casting TV (when on landscape). I have tried all firmwares with the same result.
There is a metadata code in ezcast forum that they have used to display subtitles over dlna which I am not allowed to post.
Also I have managed to use kodi/xbmc to display videos over dlna but no subs support again. There is a YouTube video and files you need in order to accomplish this.
Click to expand...
Click to collapse
I tried this vs the CR-M200S firmware, and the CR-M200S firmware is still the best imo. With my iphone that is the only one where mirroring works, and it seems to be less buggy.
Still awaiting a new better update than the CR-M200S . Youtube doesnt work with any of them!
have someone tried mirroring wich this device on wp 8.1?
lokura said:
have someone tried mirroring wich this device on wp 8.1?
Click to expand...
Click to collapse
I also have the same problem. WiDi of windows 8.1 (with supported hardware) does not work with the Chinese miracast dongle RK2928. I get the message:
Your HD digital display device did not supply the required identification data (EDID)
I found this site from sunchip, they say its workin on win 8.1 http://www.sunchip-tech.com/prod_view.aspx?TypeId=12&Id=71&FId=t3:12:3
on the screen captures you can see the firmware versión is 6.0.0 rc3, Im looking for it now in order to test.
working on wp 8.1 witch the soft from ugoos.net/A3S
lokura said:
working on wp 8.1 witch the soft from ugoos.net/A3S
Click to expand...
Click to collapse
Thanks. I will try this too.
I was able to test ergotech v10 firmware. After extensive tests It only worked with WIDI 3.5.41.0 driver. None of the latest intel WIDI drivers worked.
I will try to install ugoos firnmware to see if it works with latest intel WiDi drivers.
Thanks.
Update
Ugos A3S does not work on my Lenovo T420 laptop and Widi Intel 4.3.4.0 (((( I get the same message as before.
Update:
No firmware works with latest WiDi driver.
The only WiDi driver which works with any rk2928 firmware (I tried 3 firmwares) is 3.5.41.0.
Hardware:
Intel i5-2520M VPro
Intel Processor Graphics 3000 HD
Intel Centrino Ultimate-N 6300 WiFi
Drivers
Graphic 9.17.10.4229
Wireless: 15.18.0.1
Software
WiDi application 3.5.41.0 installed 4.3.4.0 recommended (by intel widi update tool but is not working)..
The rk2928 firmware is miracast dlna airplay compatible, without any subtitle support over dlna.
For summary if you want widi support under windows 8 (8.1) then for me only intel widi 3.5.41.0 driver is working.
Also if you want dlna support under windows 8.1 it is possible. Samsung did produce a allshare excellent application which they have now discontinued, and is working like charm under windows 8.1.
Search google and download the Samsung allshare with version: 2.1.0.12031.10 (also called 2.1.0.12031_10)
Last point. For me ergotech V10 is the best firmware on Rk2928 dongle (as I have tested. My dongle used to display a connection name: lollipop)
ios9 airplay
Since ios9 update on iphone Airplay does not work on these dongles any more! and none of the firmware.
The latest firmware located on the ergo-tech website (ergotech.com.tw/tw/Download_detail.aspx?key= firmware v.11.0.0 and 3.0.0 here) claims that it supports ios9, but i have tried ios9.0.2 and 9.1 on these with iphone and it does not work.
Does anyone know a way of getting ios9 airplay to work?
There is a RK2928 dongle which claims to have ios9 support, the Visonicom RealCast VMD-RK156 realcastptv.com/tag/WiFi-display-dongle-Rockchip-RK2928) but i cannot find a firmware download for it.
Kabeern said:
Since ios9 update on iphone Airplay does not work on these dongles any more! and none of the firmware.
The latest firmware located on the ergo-tech website (ergotech.com.tw/tw/Download_detail.aspx?key= firmware v.11.0.0 and 3.0.0 here) claims that it supports ios9, but i have tried ios9.0.2 and 9.1 on these with iphone and it does not work.
Click to expand...
Click to collapse
Firmware 3.0 disables the wifi. So it does not work.
Firmware 11 has problem with the quality. Frames are skipping and video picture gets distorted.
I have tested firmware 11 extensively it is has flaws in video quality. Only ergotech firmware 10 works flawlessly.
I am back on firmware 10.
Tested hardware: miracast rk2928, Lenovo T420 with windows 8.1, intel HD 3000 graphics card, and widi 3.5.41.0 and intel centrino ultimate N-6300 and KODI (xbmc)..
Dear Friends I am in ingrate and desperate situation, I have a briked device m806 black one with antenna, I have Prepare IDB Fail no boot and i try 50 time to flash nothing,I make 2pin shortcut and I have blue square in RK BATCH TOOL 1.7 ,but when i push RESTORE button IDB fail erorr continous! Any advice please,I have a briked device!
alesul said:
Dear Friends I am in ingrate and desperate situation, I have a briked device m806 black one with antenna, I have Prepare IDB Fail no boot and i try 50 time to flash nothing,I make 2pin shortcut and I have blue square in RK BATCH TOOL 1.7 ,but when i push RESTORE button IDB fail erorr continous! Any advice please,I have a briked device!
Click to expand...
Click to collapse
If you are using Windows 8.1 or 10, try flashing your device with windows 7.
I try with 7 and nothing!
any help???

[Q] Cisco Dx80 - Android Based General Firmware

Dear Team,
I'm quite new in this Forum and I'm sorry If this 3d is not in the right section
I'm going to "play" with my New Cisco Dx80 device, I would like to install a Standard Android Firmware.
At the moment there is an installtion of Cisco Customized Android 4.1.1 .
The Devices is based on ARM Cortex A9 @ 1.5Ghz with GPU PowerVr SGX544.
Using EsFile Explorer, I found in /system/app several apk including Galaxy4.apk, Galaxy4.odex ; seems that Cisco take the firmware somewhere (from galaxyS4?) and customized it according their needs; also the Couple A9+SGX544 seems like the same of several Galaxy S4 hardware.
The question is : there is a way to install "general" Android firmware release (rooted) that is compliant with the describer hardware ?
Thanks a lot.
Cisco DX80 Device
Did you ever find a way to put a generic Android release on this device ? I'm in the same situation with a DX80 and would just like to get a more current version of Android for it.
Thanks
crystal_chris said:
Dear Team,
I'm quite new in this Forum and I'm sorry If this 3d is not in the right section
I'm going to "play" with my New Cisco Dx80 device, I would like to install a Standard Android Firmware.
At the moment there is an installtion of Cisco Customized Android 4.1.1 .
The Devices is based on ARM Cortex A9 @ 1.5Ghz with GPU PowerVr SGX544.
Using EsFile Explorer, I found in /system/app several apk including Galaxy4.apk, Galaxy4.odex ; seems that Cisco take the firmware somewhere (from galaxyS4?) and customized it according their needs; also the Couple A9+SGX544 seems like the same of several Galaxy S4 hardware.
The question is : there is a way to install "general" Android firmware release (rooted) that is compliant with the describer hardware ?
Thanks a lot.
Click to expand...
Click to collapse
Damn I wish someone had figured something out for this, cause I would really like to know too
the same question and really appreciate if someone can give it a better custom ROM to explore
Thank you guys!
Is there any updated android software for the Dx80 conference device; or best software availavble download? If so, please pst me with link or info how I can get this device working. Thank you in advance for your assistance.

Insert drivers into Amlogic image . Why? Help please !

Hello friends. I have modified an image for Amlogic S905D with Amlogic custom Tools 6.
Everything works correctly except WIFI .... I activate the button but it doesn't work ....
I have looked and within the image I do not see the corresponding drivers ....
I have opened another image that works correctly and I have copied the drivers from the folder Level 2/system/wifi and inserted them in the image in the same folder Level2/system/wifi but it has not worked.
I have also downloaded some drivers for android for my wifi module, I have entered them manually and I have also tried in the Firmware folder ....... it has not worked either .....
I think more files or settings are needed to be done ..... but I don't have any more ideas ...
Can you help me? My wifi module is: aigale aw-cm273sm based on QCA9377
Thanks in advance!
Guerrero7000 said:
Hello friends. I have modified an image for Amlogic S905D with Amlogic custom Tools 6.
Everything works correctly except WIFI .... I activate the button but it doesn't work ....
I have looked and within the image I do not see the corresponding drivers ....
I have opened another image that works correctly and I have copied the drivers from the folder Level 2/system/wifi and inserted them in the image in the same folder Level2/system/wifi but it has not worked.
I have also downloaded some drivers for android for my wifi module, I have entered them manually and I have also tried in the Firmware folder ....... it has not worked either .....
I think more files or settings are needed to be done ..... but I don't have any more ideas ...
Can you help me? My wifi module is: aigale aw-cm273sm based on QCA9377
Thanks in advance!
Click to expand...
Click to collapse
You should also copy the firmware folder and check vendor folder too for any wifi related files
aidanmacgregor said:
You should also copy the firmware folder and check vendor folder too for any wifi related files
Click to expand...
Click to collapse
Sadly, I just tried to insert the firmware, wifi and vendor folders into the image and it still doesn't work ...
Maybe it could be a problem that I am getting the drivers of a higher version Android 7 and the one I want to compile is Android 6, which is what I need ......
Is there a way to get the drivers for an OTA update ??? I have looked but it's all inside "system.new.dat" how can I open this OTA package completely and see inside?
\level2\system\etc\wifi ?
drakulaboy said:
\level2\system\etc\wifi ?
Click to expand...
Click to collapse
Yes, with AML Tools is this....
Back to the topic.....
I have fully opened an OTA A6 update for my device, which works correctly ....
I have extracted from it everything related to WIFI-WLAN-Bluetooth since it is the same module ..... I have even changed the .jar applications
Nothing there is no way ..... Bluetooth works perfectly but WIFI there is no way .....
I have run out of ideas .... I have changed EVERYTHING related to the WIFI module !!!
there you go, these firmware are multi-wifi
https://cloud.mail.ru/public/2NPC/3pvKdoHa2
https://cloud.mail.ru/public/2F6f/5rNw1T7EX
https://cloud.mail.ru/public/Fspp/3RzFqPycz
https://cloud.mail.ru/public/53SK/eFW2ZBDWV
Click to expand...
Click to collapse
try them or get the drivers from one of them
drakulaboy said:
there you go, these firmware are multi-wifi
try them or get the drivers from one of them
Click to expand...
Click to collapse
I need to extract them because I need to compile my own image because my device has satellite , cable and DVB-T2 tuners..... That is why it is the reason for Android 6, because the DVB API of A6 is the source code that I have.
What would be all the folders in this image to extract and insert into my image?
I also see that they are arm64 ..... my A6 image not.
EDIT: I just tested the drivers for this image and are in the Kernel, I can't open the kernel for this image. It gives me an error, or it is closed or it is a fairly new version of Kernel.
oh, you have a box with android 6 with dvb-t2, it has dvb-s2 too? i have an xtreamer mxv pro, android 5.1, with dvb-t2 and dvb-s2 , and a Sunvell T95Z Plus with new ported android 9 pie
drakulaboy said:
oh, you have a box with android 6 with dvb-t2, it has dvb-s2 too? i have an xtreamer mxv pro, android 5.1, with dvb-t2 and dvb-s2 , and a Sunvell T95Z Plus with new ported android 9 pie
Click to expand...
Click to collapse
Yes, DVB-T2/DVB-S2/DVB-C, Amlogic S905D, 2GB RAM und 8GB ROM....with Android 6 and with Oscam.
Guerrero7000 said:
Yes, DVB-T2/DVB-S2/DVB-C, Amlogic S905D, 2GB RAM und 8GB ROM....with Android 6 and with Oscam.
Click to expand...
Click to collapse
oscam is working? or it's installed apart oscam.apk? can you attach/send here to me the DTVLauncher.apk and th_dtv.apk please, i just want to make Autoroll on PowerVU for Discovery
drakulaboy said:
oscam is working? or it's installed apart oscam.apk? can you attach/send here to me the DTVLauncher.apk and th_dtv.apk please, i just want to make Autoroll on PowerVU for Discovery
Click to expand...
Click to collapse
Work with oscam.apk with DVB-API bound
Of course I can send you everything you need .... No problem. Tell me the exact path of the files.
But I need 10 post to publish .... I am new ....
I would also like you to help me with my task of the WIFI drivers
Guerrero7000 said:
Work with oscam.apk with DVB-API bound
Of course I can send you everything you need .... No problem. Tell me the exact path of the files.
But I need 10 post to publish .... I am new ....
I would also like you to help me with my task of the WIFI drivers
Click to expand...
Click to collapse
i know russian language very well and i'm registered on a good forum 4PDA, from there i can get you links with firmwares for S905D boxes if you want.
the DTVLauncher.apk and th_dtv.apk are in system/app or system/priv-app, upload them on some file sharing services like zippyshare.com
drakulaboy said:
i know russian language very well and i'm registered on a good forum 4PDA, from there i can get you links with firmwares for S905D boxes if you want.
the DTVLauncher.apk and th_dtv.apk are in system/app or system/priv-app, upload them on some file sharing services like zippyshare.com
Click to expand...
Click to collapse
As I said, I need the drivers and the way to introduce them in the image, because nothing I have has worked .... I have the original drivers and the original software with the original drivers, but I still have something to load because not working ... My wifi module is: aigale aw-cm273sm based on QCA9377
On your order ..... I don't have any of those files on my system .... Maybe your device is different from mine .... The only thing I have similar is /System/app/DVB_905_player.apk and /system/priv-app/TV_Setting.apk

Categories

Resources